Import PT session, 003+ user

Hi guys,
I'd like to import some PT TDM session into logic.
1) When opening TDM session with PT LE, what kind of problems should I be aware of? I know, there is the track number limitation.
2) Are there any other problems I should be aware of? Workarounds?
3) How complicated is it to import a session with more than 32 tracks into PT LE and whats the best way to export the complete session to logic if needed?
Thanks in advance,
Eddie

Eddie Eagle wrote:
Hi guys,
I'd like to import some PT TDM session into logic.
1) When opening TDM session with PT LE, what kind of problems should I be aware of? I know, there is the track number limitation.
Any TDM plug-ins will not open inside LE. If you can, switch them out for RTAS plugins, and save the settings also.
2) Are there any other problems I should be aware of? Workarounds?
You should Render (altcommandkeyboard #3) al the audio files, and have them rendered startign at the same point, for easier lining up in Logic later on.
3) How complicated is it to import a session with more than 32 tracks into PT LE and whats the best way to export the complete session to logic if needed?
You can import the whole session, and after you are done rendering tracks 1-32, along with plugins, etc... then turn off the voices for tracks 1-32, and turn on the voices for tracks 33 and up.
If you are lucky and can have some of the plug-ins as Audio Units as well, then less work for you. this is why I have moves more and more towards third party plugins like Waves, which have TDM, RTAS and Audio Units. this way all I have to save on those if the settings, and notes on each song as far as what plugin goes where, but I no longer have to render the audio with the plugin effect included.
Thanks in advance,
Eddie
Cheers

Similar Messages

Creating filtered view on the physical layer ussing session variable USER

Hi:
I´m creating a view on the physical layer, the view needs to be created dynamically. So depending on the user (using the session variable USER) the view is created with the data a particular user is able to see.
Fisrt I imported the table and changed it´s properties to be created through a "Select Statement" so i don´t needed to change the mapping on the bussiness model layer.
The consistency check was OK but i´m not able to see data in answers, even using the Administrator user. Have anyone tried to do this? Here is my query.
Thanks
A Garcia
Select * from D_ESTRUCTURA_RH2 where Region_ID
IN
select distinct a.REGION_ID from APP_INDPERSONAL_DM.D_ESTRUCTURA_RH2 a
inner join (
select distinct b.REGION_ID from APP_INDPERSONAL_DM.D_ESTRUCTURA_RH2 b
where exists (select 1 from APP_INDPERSONAL_DM.Autorizacion a, usuarios c
where a.app_id = 1
and a.usuario_id = c.Usuario_Id
and UPPER(c.Nombre_Usuario)=UPPER(':USER')
and a.miembro_id = 'REGION_ID'
and a.operador = '='
and (b.REGION_ID = (case when valor = 'Todo' then 0 else valor end) or valor='Todo'))
) seguridad
on
a. REGION_ID = seguridad.REGION_ID
)

whay not use the same filter in the content tab of the logical table source?
check the physical sql sent to databse using web-admin-manage sessions-view log and see if there is any unexpected behavior. also run the same query in db and see iff you get the results in databse itself.

"Lightroom -- Opening Catalog Studio Session-003.JPG.lrcat"

For more than two years I had no problems that were encountered using Adobe Photoshop Lightroom 3.2 (which was upgraded to Adobe PS Lightroom 3.6). Until last month I could not open my Lightroom v 3.6. with this message on the screen --- "Lightroom -- Opening Catlog Studio Session-003.JPG.lrcat"
To remove the cause which I believed was in the later version of Lightroom v 3.6, I uninstalled Lightroom v 3.6 and reinstalled the Lightroon v 3.2 from the DVD I purchased more than two years ago.
After reinstalling LR 3.2, I restarted my computer and after that I double-clicked the LR icon giving me this message: “Lightroom – Opening Catalog: Studio Session-003.JPG.lrcat”
In the box I saw this message:
Adobe Photoshop Lightroom 64-bit has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Close program

The name of the Catalog file indicates that you have inadvertantly selected a jpeg image file as a name for a new catalog. I am not sure the full and correct way to resolve the issue but I believe it includes removing the offending "inapproprately named catalog file".
Maybe someone else will provide some additional info. In the meantime if you could post a screen capture of the contents of your "user>(your name)my pictures> Lightroom" folder. This will assist.

Invalidate session when user clicks back button

I want to invalidate the session when user clicks back button, so that user cannot refresh and reload a page.
Any suggestions will be highly appreciated.
Message was edited by:
sam_amc

* SessionInvalidator.java
* Created on October 27, 2006, 9:18 AM
package web;
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author javious
* @version
public class SessionInvalidator extends HttpServlet {
    /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
     * @param request servlet request
     * @param response servlet response
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        response.setContentType("text/html;charset=UTF-8");
        PrintWriter out = response.getWriter();
        String reposted = request.getParameter("reposted");
        if("true".equals(reposted))
            HttpSession session = request.getSession(false);
            if(session == null)
                // This is step 4 and beyond
                out.println("<html>");
                out.println("<head>");
                out.println("<title>Servlet SessionInvalidator</title>");
                out.println("</head>");
                out.println("<body>");
                out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                out.println("I said, your session is now invalid! Now where are those Duke Dollars at?");
                out.println("</body>");
                out.println("</html>");
            else
                Integer hitCount = (Integer)session.getAttribute("hitCount");
                if(hitCount == null)
                    // This is step 2 (the "good" - "stay" page.)
                    out.println("<html>");
                    out.println("<head>");
                    out.println("<title>Servlet SessionInvalidator</title>");
                    out.println("</head>");
                    out.println("<body>");
                    out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                    out.println("Your session is good.<br>");
                    out.println("If you click the browser's back button, you will invalidate your session.");
                    out.println("</body>");
                    out.println("</html>");
                    hitCount = 1;
                    session.setAttribute("hitCount", hitCount);
                else
                    //We've used up our good visit
                    session.invalidate();
                    // This is step 3
                    out.println("<html>");
                    out.println("<head>");
                    out.println("<title>Servlet SessionInvalidator</title>");
                    out.println("</head>");
                    out.println("<body>");
                    out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
                    out.println("Your session is now invalid");
                    out.println("</body>");
                    out.println("</html>");
        else
            // because the javascript in the following output will never allow a user
            // to continue clicking back any further than this, we can safely create the session.
            // (or perhaps the session can already be created here and this may not be necessary).
            // A problem lies where if the user chooses to "select" a page back in history they thereby
            // potentially skip back "over" this functionality, thus defeating the purpose of it.
            request.getSession(true);
            // This is step 1 (indirection)
            out.println("<html>");
            out.println("<head>");
            out.println("<title>Servlet SessionInvalidator</title>");
            out.println("</head>");
            out.println("<body onload=\"document.getElementById('invalidatorForm').submit()\">");
            out.println("<h1>Servlet SessionInvalidator at " + request.getContextPath () + "</h1>");
            out.println("<form id=\"invalidatorForm\" action=\"SessionInvalidator\" method=\"POST\">");
            out.println("<input type=\"hidden\" name=\"reposted\" value=\"true\">");
            out.println("</form>");
            out.println("</body>");
            out.println("</html>");
        out.close();
    // <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
    /** Handles the HTTP <code>GET</code> method.
     * @param request servlet request
     * @param response servlet response
    protected void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        processRequest(request, response);
    /** Handles the HTTP <code>POST</code> method.
     * @param request servlet request
     * @param response servlet response
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
        processRequest(request, response);
    /** Returns a short description of the servlet.
    public String getServletInfo() {
        return "Short description";
    // </editor-fold>
}The problem with even attempting to do this is that with today's browser capabilities, users can optionally choose to jump to a particular page in the browser history and this may not necessarily be the most recent page. In this case, you would also want to invalidate the user's session after already having been there (whatever page that may be). Then you have situations when the user may wish to jump back in history to external pages they were visiting before they reached your own site's pages. Then what happens when they start clicking forward, forward, etc... from there? This is why I prefer writing Swing Clients as alternatives to browser applications. There are soo many possible ways break web applications made for standard web browsers both maliciously and simply by accident or irregular user patterns. Regardless, this servlet would work based on the assumption that all the user(s) would "ever" do aside from moving logically forward is clicking on the browser's "back" button.
cheers!
Message was edited by:
javious

How to realize only one identical remoteApp per session per user per computer?

If a terminalserver 2008 R1 is configured for only one session per user, everything works like it should if the user connects using the 'normal' remotedesktop session. A second connect with the same credentials kicks the first connect.
If a remoteApp is used instead of the 'normal' connect, it's possible to start multiple instances of this app within one user a least from one computer. mstsc do run multiple times and seem to link in the existent connection without kicking it. How to change
that?
Continuative:
The started RemoteApp checks the mutex of all started processes and stops herself if a process is found with the same mutex. This prevents multiple instances of this app within one user with the same sessionID. If a terminalserver is configured for only
one session per user, this RemoteApp shouldn't start multiple within one user. Using a "normal" remote desktop session the app doesn't start more than one time, I tested it. Used as RemotApp, the app starts multiple! Possibly I'm able to change this behaviour
with a code fix instead of configuring terminal services. Any tips regarding mutex and terminalservers?

Hi,
I tested the following code and it is working for me both in a RemoteApp and Full session:
Imports System.Threading
Module Main
Sub Main()
Dim createdNew As Boolean
Dim m As New Mutex(True, "TPMutex", createdNew)
If Not createdNew Then
Return
End If
Application.Run(Form1)
GC.KeepAlive(m)
End Sub
End Module
-TP

Importing Certificates for all users on a machine

How do I import certificates for all users on a machine in Windows/OSX.
Since firefox does not use the system store and uses its own, we have been able to use a utility called certutil to add certificate to a user's firefox db on Linux. So if the user logs into any Linux system on our network he will have those certs in his trusted root cert authority for firefox. Unfortunately this does not carry over to firefox on osx as I am not sure why since it should carry over if the user's home is network. Then we have Windows users who basically have local accounts and we are looking for some solution to have it set up for all users without having to manually import for each user. Any ideas would be much appreciated.
Thanks

See CCK Wizard: https://addons.mozilla.org/firefox/addon/cck/
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
*http://kb.mozillazine.org/Locking_preferences
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes

Limit the number of session per user in the Wired dot1x environment with ISE 1.2

Hello,
I need to check if there is any configuration/workaround to limit the number of sessions/access per user in the Wired dot1x configuration.
I need to check if this feature is available or not to solve the following scenario:
I have 2 SW ports configured to use dot1x authentication with ISE 1.2 server.
If user A connects to the 1st port and authenticated then he will placed on a VLAN based on the authorization profile.
The case, that I need to deny the same user to connect on a different machine with the same credentials.
The ISE itself does not have this feature currently, the only feature available is to limit the number of sessions for the guest user.
Is there any workaround on the Cisco switches to solve this? Cisco WLC has this feature and for the VPN we can limit the number of sessions also from the ASA itself.
Thanks.

limit number of session per user using wired dot1x is not available in 1.3

Grant debug connect session to user

I understand that if DBA hasn't granted following option to "user" following way:
grant debug connect session to user;, then "user" wil lget following error when she tries to debug:
ORA-0131:Insufficient Priviledges
Debugging requires Debug connect session system priviledgesIs there any explanation why DBA decides to not grant such privilege? Maybe such privilege slows down something? Maybe it can create security "hole"? Maybe there is another good explanation?
The "user" in this example was Schema/Account ment for Development personell who developes functionality, but it doesn't matter i think what kind the "user" is.
so why you think i don't have such privilege, what bad could such privilege when granted give?

Its just that You have not been Granted that Privilege. Mostly in what ever shop i have worked Such grants are given on request Base.
Debugging is a Developers Right and no one can denie it.
But i never use any debugging tool. I only relay on my Instrumented Code.

What would cause adobe connect to freeze in a session for users, while the moderator session did not

what would cause adobe connect to freeze in a session for users, while the moderator session did not

HI rogerstam1
Is screen being shared at that time when addin freezes?
if yes if this coems again could you just stop screen share and try it again.
hope this helps.

Clustered WL 6.1 creates 2 server sessions per user

          It appears that WL 6.1 creates 2 HTTP sessions per user for a simple JSP object.
          It shows in "ADmin Console/mydomain> DefaultWebApp> Web Applications> DefaultWebApp>
          Servlet Runtimes":
          1 /count.jsp
          1 /*.jsp
          In a non-clustered environment this does not happen.
          Is that normal?


I found the problem myself. For some reason WL did not like any special characters in the system password. I am not sure which ones are valid and which are not but I am avoiding them all right now.

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Using the Import utility from other users and going to a different schema

I has a user today with rights
Insert into XXXX.TABLE values(); Works just fine for another schema's table which has select,insert,update,delete.
We tried to utiile the import utility from OTHER USERS
Insert failed ORA-00942
Do you want ot ignore all errors
Even though we have rights to the schema under OTHER USERS.
When connected as the owner it works fine.

I've be trying to find a work-around to this issue & found this old post -- I'm having the same problem.
I'm using Oracle 11g and SD 2.1.1.64.
I have user A with a table that grants select,insert,update, and delete privs to user B. Logging into user B I, of course, can do inserts, deletes, etc. on the the table in user A's schema.
When I use the import data feature to load data from a CSV file I can't get it to work while logged into user B. It does work fine if logged into user A. It looks like the issue may be that it doesn't put the schema prefix of "A." on the insert statements.
Has anyone found a way to get around this issue yet?

Is it possible to export and import the roles and users tables?

Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, Melanie

Hi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard

Single Database Session Per User in ADF/BC Application

Hi, I am using ADF with BC (JDeveloper 11.1.1.1). My application contains multiple application modules, each connected to the same JDBC data source. On the app server, I have configured the data source to use Identity Based Connection Pooling.
My current configuration is resulting in numerous database sessions for each user. I have a requirement to use only a single database session per user HTTP session. Is there any way to configure the application modules to achieve this?
Thanks,
Brad

Hi,
use a single root Am module and make sure the others are used as nested modules. This will create a single connection
Frank

Import txt file into user dictionary

How to import text file into user dictionary through javascript? I can manually import txt file into user dictionary thru "Edit=>Spelling=>User dictionary...". But I don't know how to do it using javascript. Please advise.

Advice? See in some version of the object-model reference under userDictionary. There you'll find a method called addWord(), which looks promising.
Peter

Import PT session, 003+ user

Similar Messages

Maybe you are looking for