Import scenario warning message

hi guys,
when import 2 difference version of scenario into the same execution repository
version 001 could be imported without a warning message
version 002 could be imported with a warning message
"the file being imported contains objects from a repository with ID 1 , but this repository is not declared in the target repository. Would you like to declare it and proceed with the import?"
after summited OK
then the scenario version 002 are imported.
but the curious of this problem is what is a different between of this 2 version
have any ideas ?

What gives?
It is a generic message letting you know that playback of some content/project effects may be affected by the real time rendering of assets. Remember no video file is produced during the editing process -- only at the time of sharing/exporting. Thus all effects (transitions, titles, video overlays, audio overlays, etc.) are rendered/blended with the HD source media in real time for display purposes only which, of course, can slow down proper playback.

Similar Messages

Process Order Warning Message while doing the Goods Receipt

Dear All,
While doing the GR against process order via t.code MB31, we are getting a warning message which reads u201CProduction date of bch 110420 (17.06.2011) does not match the prod. date entered (26.08.2011)u201D this happens only if the batch number already exists in the system for the same material code , in this scenario if the user ignores the warning message & posts the document the existing batch number production date also will be over written with current/inputted manufacturing dateu2026 this will collapse the batch traceability. Is there a way to customize where we can have a different production date for same batch number?..
For example:
Batch Number: ABCD
Production date 10.02.2011
Batch Number: ABCD
Production date 11.02.2011
Batch Number: ABCD
Production date 12.02.2011
Regards,
Sivanandan

I'm sorry to say that I find your requirement to be absolutely not logical; a batch is, by definition, a homogenous quantity of a material, that you want to separate by it's characteristics from other, different, quantities of the same material.
If you decided that manufacturing date is a characteristic of the batch, then it has to be unique for one batch.
So, as I see it, you have two options: either decide that manufacturing date is not important and do without, or have different batches for the different dates.

Warning Message in Absence Page

Hi All,
I have a requirement detailing the Following Scenario in Oracle HRMS R12.1.1
1. User selects Create Absence Entry
2. Selects Paternity Leave
3. Create the Leaves and Click the Submit Button
4. A warning Message should be issued to the User (Asking him to submit the Child Birth Certificate)
5. This should be a warning message and if the user clicks the submit button once again, he should be allowed to submit the Leave.
I have extended the concerned class in the Page and added the Warning Message.
However when submitting the leave in the Application, the Warning Message is displayed, but it does NOT allow the user to proceed.
The code is as follows:
if(absenceType.trim().equalsIgnoreCase("Paternity Leave") && gender.equalsIgnoreCase("M"))
//Change by Ravi @ 06-Aug-2010 to give a Warning Message to the User that a Medical Certificate Needs to be provided
throw new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);Grateful if you people could help.
Thks
Ravi

Hi Ravi
throw statement throws the error and ends the execution!!!!You can try like below code
if(absenceType.trim().equalsIgnoreCase("Paternity Leave") && gender.equalsIgnoreCase("M"))
//Change by Ravi @ 06-Aug-2010 to give a Warning Message to the User that a Medical Certificate Needs to be provided
//throw new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);
OAException exception = new OAException("You are requested to submit original medical certificate certifying birth of child" , OAException.WARNING);
pageContext.putDialogMessage(exception);Hope it helps!!!
Thanks
AJ

Warning message in Lion

Hi ,
I just installed Mac OSX Lion.
When I download a set of images (like a manga for example) in Preview , a warning message saying that this is an image taken from the internet (and asking me if I'm sure I want to open it) keep bugging me. How to get rid of this message ?
Thanks to thoses who could help me.

Does it say "image" or application
Protect your computer from harmful applications
Some harmful applications exist that can cause problems for your computer. Frequently, a harmful application will try to appear as an innocent document, such as a movie or graphic file. These applications, called “trojans,” are most often spread by Internet downloads and email enclosures.
Important: If you receive an application warning and you don’t expect the file to be an application, don’t open the file. Delete it from your computer.
Here are some tips to protect your computer from harmful applications.
Never download unlicensed or “pirated” software from the Internet.
Accept only applications you receive from a known and trusted source.
Run an antivirus program if you find any suspicious files or applications, or if you notice any suspicious behavior on your computer.
To reduce the amount of exposure to harmful applications or files, limit the number of administrator accounts you create. Consider creating a user account for your daily work and use the administrator account only when you need to install software or administer accounts.
If you enabled the root user and you don’t currently need it, disable it.

A warning message in the Inbound part of the IDOC

Hi all,
A warning message is being displayed for the Inbound part of the IDOC.
Here is the message.
No filters , No conversion , No version change .
IDoc successfully processed in the ALE layer
    The IDoc has passed through the ALE layer successfully and can now be
    passed to the application. This transfer is either done online or as a
    background job, depending on the settings in the partner profile.
    If there are no further status records, the IDoc waits for the next run
    of the transfer report to the application.
    Success or failure when passing the IDoc to the application is
    documented in the subsequent status records.
Actions in the ALE layer
    The parameter 'No filters' indicates whether the processing in the ALE
    layer led to segments of the inbound IDoc being omitted. The important
    criteria here are the settings in the segment filter and in the
    distribution model for this sender.
    The parameter 'No conversion' indicates whether field values were
    converted in the ALE layer. This is the case if the IDoc contains
    organizational units to be converted, or if the ALE conversion tool for
    this sender is activated.
    The parameter 'No version change' indicates whether the IDoc was
    converted into an earlier version of the IDoc type. This happens if the
    IDoc type of the sender is different from its own IDoc type.
I have checked all the necessary Config settings and all of them are in place.
Your help on this will be highly appreciated.
- Surya.

Hi,
The IDOC may have successfully passed through the application, but check whether the status of the IDOC is changed to 53.
No filters, No conversions, No version change
occurs when the IDOC is not processed fully.
It may have stopped the processing without raising any error...
Check the program, whether there is any piece of code which stops the processing of the IDOC without changing its status to 51.
Sharin.

CONVERTING ERROR MESSAGE TO WARNING MESSAGE

HI GURUS,
CAN ANY ONE GIVE ME IDEA HOW TO CONVERT ERROR MESSAGE TO WARNING MESSAGE IN QM MODULE.WHEN I AM POSTING STOCK FROM QUALITY TO UNRESTRICTED. BECAUSE IAM GETTING ERROR WHEN IAM POSTING STOCK GIVING ERROR TRANSFER POSTING THROUGH QUALITY ONLY. MY ERROR MESSAGE NO IS QA495. I TRIED ALL POSIBILITES. BECAUSE I AM NOT GETTING INSPECTION LOT BUT STOCK IN QUALITY. GIVE ME IDEA.
BHAKTA

Dear BHAKTA,
it's not possible to customize every message in SAP System to warning or error.
It depends on the coding. I have found message QA495 twice in coding, both times it's hard coded in Inlcude MM07MQSS. So it's not possible in standard to change this.
How to find this information:
SE91
-> enter the message
-> button 'display'
-> select the line
-> button 'where-used list' (CRTLSHIFTF3)
-> now you get a list of all programms where the message is used
Now you can check if message type is hard coded or read in customizing.
If you really want this you have to modifiy the coding. But I would not recommed this, as hard coded errors are necessary to make sure that the standard scenarios work correctly.
Regards,
Sabine

Warning message into Application log of Service request

Hi Experts,
I have a requirement where I am using Event handlers(CRMV_EVENT) to redetermine partners of a service request whenever certain values are changed in the transaction CRMD_ORDER.
Partners will be retrieved from a custom table.
In any circumstances, if the partners cannot be determined then we need to push a WARNING message stating that "Partners can not be determined, pls maintain the values in the custom table'.
For this purpose I am using the function module CRM_MESSAGE_COLLECT with the following parameters, but still I am not able to see the same into the Application log of the Service request that is going to be created.
CALL FUNCTION 'CRM_MESSAGE_COLLECT'
EXPORTING
    iv_caller_name         = 'ORDERADM_H'
    IV_REF_OBJECT          = iv_header_guid
    IV_REF_KIND            = 'A'
   IV_LOGICAL_KEY         = '0001'
    IV_MSGNO               = '001'
    IV_MSGID               = 'ZSP'
    IV_MSGTY               = 'W'
IV_MSGV1               = SY-MSGV1
IV_MSGV2               = SY-MSGV2
IV_MSGV3               = SY-MSGV3
IV_MSGV4               = SY-MSGV4
    IV_MSGLEVEL            = '1'
IV_FIELDNAME           =
IV_ACTION              =
    IV_LOG_HANDLE          = lv_log_handle
    IV_CUMULATE            = 'X'
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Do I missed in passing of any additional parameters?
Can any one of you have encountered the same problem and solved this, pls through some light on me too(if possible with block of code).
Thanks in advance.

Hi,
Here is the block of code that I used to push a message in to Application log.
Push your message into a variable called dummy and then call the below mentioned function module.
DATA:        lv_dummy(254)    TYPE c,            "#EC NEEDED
          MESSAGE w052(sppf_media) WITH text-001
                                        text-002
                                    INTO lv_dummy.
          CALL FUNCTION 'CRM_MESSAGE_COLLECT'
            EXPORTING
              iv_caller_name = 'ORDERADM_H'
              iv_ref_object = iv_header_guid
              iv_ref_kind    = lc_ref_kind_a
              iv_msgno       = sy-msgno
              iv_msgid       = sy-msgid
              iv_msgty       = sy-msgty
              iv_cumulate    = lc_x
            IMPORTING
              ev_msgty       = lv_msgtyp
              es_msg_handle = gv_msghandle
            EXCEPTIONS
              not_found      = 1
              appl_log_error = 2
              OTHERS         = 3.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
        ENDIF.
Hope this helps to resolve your issue.
Regards,
Usha.

Warning Message - Tracknumber of CEvLaunch too high! Help?

Hi there
I am attempting to import a midi file I found online into GarageBand 09 but I get the following pop up
*Beta-only warning message - not to be localized:*
*Tracknumber of CEvLaunch too high!*
I'm not really too sure what this means? Does it maybe mean the volume is too high? Or there are too many tracks for Garageband to cope with?
When I click OK a few times on the pop up it then pops up
*Launch Event without associated track found!*
*Changed to track 1.*
I then have only 3 tracks for this song when I know there are many more.
I want to be able to hear and use all of the tracks form this midi file in GarageBand 09.
FYI when I play the midi file with Quicktime 7 it sounds fine, with all the tracks being audible.
Can anyone help?
Thanks!

I have a way around this message popping up (but would still like to know why this error appears).
I downloaded this free program
*Midi File Editor 2.01*
Available here
http://mac.softpedia.com/progDownload/Midi-File-Editor-Download-71782.html
Opened the file, and then saved it as a new name.
Imported it to GarageBand and it worked with no errors (although the instruments are way off)
Its a very old feeling program Midi File Editor 2.01, but hey, it worked!
Yay!

Warning messages?

How do I turn off the very annoying battery warning message?
how do I disable battery warning message?
Both these are very annoying and ever remind me of windows which I hate

ckuan, you are clearly from the generation who can't spell or take responsibility for their own lives. I don't need someone to tell me when I need to use the bathroom, that was a metaphor in case you didn't realise. Similarly I don't need somebody else telling me when my battery is about to expire I can see that from the battery symbol itself it goes red or didn't you realise that either. if my call was that important I would make sure I was plugged into to a charger or my battery was full before hand.
Why not have an audible warning also and a voice???
Your comment was ridiculous. For apple not to give the user the option of turning off the message purely encourages hackers and jailbreakers. If Apple don't give the users what they want then they are opening themselves up to viruses malware and likes of Windows insecurity. I sincerely hope this does not happen.

Warning messages are not displayed in confirmation

Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
Natarajan

Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan

Warning messages in mapping deployment window

Hi all,
After deploying a mapping I got several warning messages but have no clues as to what and where they are referring to. Example of a warning message that I got:
ORA-06550: line 32250, column 11:
PL/SQL: SQL Statement ignored
Do anyone of you know where the line 32250 and column 11 is exactly referring to? I need to see the code in order to know wat's the error. Do I refer to the script in the Script tab? But it seems to refer to nowhere if that is the case...

Sutirtha Roy wrote:
Hi ,
The line numbers in the error messages are usually offset from the start of the package body, but the generated code listing has the package spec and body. So for example you got this one:
LINE 671 ,COLUMN 12:
PL/SQL: ORA-00942: table or view does not exist
So you want to find package body line 671. So inside the generated code viewer, find the text "CREATE OR REPLACE PACKAGE BODY". Note the line number where that occurs, then add it to 671, that should be your actual line number.
Thanks,
SutirthaThanks Sutirtha,
I finally made sense of where the warning messages were referring to. But I could not understand why some of these messages were produced. The scenario is like this.
I added a unique key constraint on the attribute suppcode in the supplierwh table, and for all instances of this supplierwh table in my mapping where the loading type is "Update", I set the loading properties for both "match column when updating" and "match column when deleting" to No. Validation has got no errors but upon deployment warning messages were produced. Half of these warning messages were of this type:
Warning
ORA-06550: line 2449, column 41:
PL/SQL: ORA-00936: missing expression
Upon checking where these similar type of warning messages were referring to, all of them were pointing to codes something like below:
"MERGE_SUBQUERY"
ON (
*"T_SUPPLIERWH_T1UPDATE"."SUPPCODE" = AND*
"T_SUPPLIERWH_T1UPDATE"."SUPPKEY" = "MERGE_SUBQUERY"."SUPPKEY_1"
I believe the error codes are the ones in bold because there is nothing after the = sign. But I do not understand why this is so. Can anyone help?
Edit: I think I found the reason to this. Is it because of the "match by constraint" attribute? What does this attribute do when set to "All constraints"?
Edited by: user8915380 on 29-Apr-2010 01:38

Warning messages in Order log (GUI)

Hi all,
I need to display warning messages in the message log of Order in GUI. I tried with 'CRM_MESSAGE_COLLECT'. If I take 'W' as the message type, it is not displaying the warning message in the Order, but when I use 'E', it is displaying the error messages in the order.
Let me know the solution. Thanks in advance.
Following is my code.
        CALL FUNCTION 'CRM_MESSAGE_COLLECT'
          EXPORTING
            iv_caller_name       = 'ORDER'
            iv_ref_object          = lv_ord_guid
            iv_ref_kind             = 'A'
            iv_msgno              = '001'
            iv_msgid               = 'ZABC'
            iv_msgty               = 'W'
            iv_cumulate           = 'X'
          IMPORTING
            es_msg_handle     = l_msg_handle
          EXCEPTIONS
            not_found              = 1
            appl_log_error        = 2
            OTHERS               = 3.
-Santosh

hi
Looks like the message numbers you are processing in the function module CRM_MESSAGE_COLLECT are only for 'errors'.
Please go to Transaction: CRMC_MSGS
Look at the following Application Areas
CRM_ORDER
CRM_ORDERADM_H
CRM_ORDERADM_I
CRM_ORDER_MISC
CRM_ORDER_OUTPUT
Select one of the above and double click 'Single Messages' towards your left side on the screen. Select the relavant message number from the list and check the 'S' flag. Press 'F1' (help) on this box and you will see the following.
Only error messages are saved in the processing log. If a message definitely should be saved - contrary to this rule - then the indicator needs to be set.
You need to make sure that a message marked like this can be deleted again - by calling up the function module CRM_MESSAGES_DELETE in the appropriate place in the program.
When you do these steps, please note the message 'Do not make any changes (SAP data)'. This is not tested and used from my side. Please see if this impacts other functions. I am not sure. Do necessary R&D before you proceed further. Please explore tables CRMC_MESSAGES_S and CRMC_MESSAGES and see if this helps.
Reward if helps
Regards
Manohar

Vendor Payment TC F-58/F-53, warning message for selecting NON DUE invoices

Hi,
I have scenario with my client, they want that during manual vendor payment against TC F-58&F-53, if the invoices are not due for payment but if selected by the user during manual payment, is there any configuration by which system will give a warning message to the user saying invoices are not due for payment before saving the document.
Thanks
MRS

You have to find the appropriate "Message Area" and "Message Number" in "Maintain Message Control".
Add the message into the Message Control and make it as WARNING message.
<< Moderator message - Point begging removed >>
<< Begging for points is against the furum rules. Repeated violation of forum rules can result in your userid being deelted. This is the third time you have been warned.>>
Thanks.
Edited by: Rob Burbank on Jan 18, 2011 3:57 PM

Warning message due to JSPDynpage

Hi All,
We have a scenario where in the jspdynpage we have only hyperlinks and One of the hyperlink is pointing to the standard uwl iview as follows
[http://portalhostname:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwl_iview?sap-config-mode=true|http://portalhostname:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwl_iview?sap-config-mode=true]
We are on CE7.1 and whenever I click on this hyperlink of jspdynpage, the uwl iview opens but with a warning msg at the header of the UWL as follows
"Another administrator is currently customizing this application. If you want to customize, please restart the application later and try again"
Same UWL iview when I open thru Home ->Work->UniversalWorklist , it does not show this warning message.
Is it bcoz of any session object inthe jspdynpage? any pointers will be of great help.
one note & Observation
assume that all the users are logout from the portal now any user first logged into the portal then that warnong message is not displayed at the header level of the UWL iView which we are accessing thru the hyper link from the JSPDynpage . but second user onwards any number of users are logged into the portal and click on the hyperlink in the JSPDynpage and it goes to UWL Iview where it is showing the above mentioned warning message at the header level. it is happening the same for the second user, third user and all users consequently but this warning message is not displayed for the very first logged in user.
Can anybody replys then it would be great help to us . <<text removed>>
when we access those links directly from the browser it is not giving that above specified warning message but this warning message is getting displayed when we access those hyperlinks from JSPDynpage .it seems there is some session related problem or something related to that. pls help.
Thanks
Bindu
Edited by: Hima Bindu on Apr 22, 2009 6:40 AM
Edited by: Matt on Apr 22, 2009 3:46 PM - please do not offer rewards

Hi Michael
Excellent !! .our issue has been resolved.
Thank you very much & Thanks a lot for your help.
Can you please tell me what the reason due to with ?sap-config-mode=true in the URL...??
can you please give me the reason why this warning message is disappeared by removing the ?sap-config-mode=true.
Thanks
Bindu

Can we save the warning message in the message log of Lead.

Hi,
I have an requirement where i have to raise an warning message while "creation of lead from campaign" on campaign UI, I can raise that warning message using below code.
DATA lr_message_service TYPE REF TO cl_bsp_wd_message_service.
lr_message_service = cl_bsp_wd_message_service=>get_instance( ).
lr_message_service->add_message( iv_msg_type = if_genil_message_container=>mt_warning
iv_msg_id = 'ztest'
iv_msg_number = 006
iv_msg_level = '1' ).
but how can i retain this warning message in the lead message log ? "when ever i will open that lead again that warning message should be there"
thanks & regards
raman khurana.

Hi,
Below are the steps to write to the log and then read it,
1. Create a Log useing FM BAL_LOG_CREATE. This will return the log handle.
2. Add messages to log using FM BAL_LOG_MSG_ADD. Importing parameters are log handle and the message.
3. You can read the log by passing the log handle to FM BAL_GLD_SEARCH_MSG. This will return the message handle.
4. Now pass the message handle to FM BAL_LOG_MSG_READ. This inturn return the message id and class. Pass the msg. details to FM BAL_DSP_TXT_MSG_READ to read the message text.
Regards,
Arun Kumar

Import scenario warning message

Similar Messages

Maybe you are looking for