Import to another server

I hav release my transport request,but dnt know how to import it on another server..........plz guide me in this..

Hi Dheeraj
  Importing to other servers depends on the mechanisms implemented in your server.
Very common mehanisms are:
1. Via transaction STMS:
   After getting to transaction STMS, click on Transport Overview(F5) from application toolbar.
   This lists the defined transporting layers.
   Select the server to where it has to be imported. Double click on the same.
   Always better to refresh in the next screen to have latest requests.
   Select the request to be imported.
   Use menupath: Request -> Import.
   In the next dialog give the client number, select Synchronous from Execution tab.
   Now select, this will start the importing session. It might ask for login if you are trying to import from Development.
2. Via UNIX Commands.
Kind Regards
Eswar

Similar Messages

  • Import app from another server

    Recieving an error when trying to import application that was developed on another server.
    The error message is:
    "ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 3: PLS-00201: identifier 'P_ID' must be declared ORA-06550: line 14, column 1: PL/SQL: Statement ignored <pre>begin wwv_flow_api.create_page_branch( p_id=&gt;2434179818019486112 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_flow_step_id=&gt; 1, p_branch_action=&gt; '2', p_branch_point=&gt; 'AFTER_PROCESSING', p_branch_type=&gt; 'BRAN"

    Hi again scott.
    well, we just tried and changed it to:
    wwv_flow_api.create_page_branch(
    p_id=>2434179818019486112 + wwv_flow_api.g_id_offset,
    p_flow_id=> wwv_flow.g_flow_id,
    p_flow_step_id=> 1,
    p_branch_action=> '2',
    p_branch_point=> 'AFTER_PROCESSING',
    p_branch_type=> 'BRANCH_TO_STEP',
    p_branch_when_button_id=>2257454128020560151+ wwv_flow_api.g_id_offset,
    p_branch_sequence=> 10,
    p_branch_comment=> 'Created by Noone');
    and i receive the same error, i think:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 3: PLS-00201: identifier 'P_ID' must be declared ORA-06550: line 14, column 1: PL/SQL: Statement ignored <pre>begin wwv_flow_api.create_page_branch( p_id=&gt;2434179818019486112 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_flow.g_flow_id, p_flow_step_id=&gt; 1, p_branch_action=&gt; '2', p_branch_point=&gt; 'AFTER_PROCESSING', p_branch_type=&g
    so guess its not the problem then...

  • How do I import email messages from another server?

    Heya,
    So I can't figure out how to import mail messages from another server into this one? I had [email protected] pointing to the old one, when I repointed it obviously all my email "disappeared" because there is none on the new server. So how do I move it from the old server to the new one? Usually I'd just drag and drop the email message files over FTP but SLS doesn't seem to give me permission to do that on this one.
    Thanks!

    Search for discussions of the imapsync tool.

  • Import data into database on another server

    What is the syntax to import data from a .dmp file on another server into a database on a different server? Do I just use
    imp scot/tiger@nextdb parfile=params.dat
    I do not have enough space on the other server to hold the large import file. Even a compressed file give a 'no space left on device error', so I want to just issue the import command on the other server. Is that possible?

    Yes it is possible and the example you provided is enough if you want to import the data in nextdb.
    But, consider network bandwidth, since all data that has to be imported must go thru the network. This can make import process much slower.
    One more thing to consider! You have mentioned there is not enough space on your destination site for the dump file. If that is the case, make sure that you have enough space for the data that has to be imported.
    See how much free space you have in the target tablespace and the target location in order to be sure that there is enough space for the data.

  • How can I move the ODI Work Repository from one server to another server?

    How can I move the ODI Work Repository from one server to another server?

    Hi,
    If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
    I.e. Dev. server to Prod Server.
    1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
    2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
    3. After exporting, you can view the xml files in the folders.
    4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
    5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
    6. Similarily, import again target then Project.
    Now, check. It should work.
    Thank you.

  • How to transport a custom bapi (written by me) to another server

    Hello friends,
    We have a software that is integrated with SAP. To make our software work with SAP, we have some custom bapis created on SAP side. We would like to transfer them to another server that is on a different network. After reading many documents and forums here is the what I have done and the problem that I am facing. Your help will be highly appreciated.
    1.Started Transaction 'SE80'.
    2.Created a test package called 'ZTRANSPORTTEST'.
    3.Created a function group called 'ZTRANSPORTTESTFN' under that package.
    4.Created a function module under the group called 'ZTRANSFUNCTION'
      NOTE: Just saved and activated without adding any code since I won't be using this function
                 for anything other than to test the Transport Feature.
    5. Clicked on the button that said 'Transport Organizer' and saw the list of requests including the
        EC1K900083one that I just created.
    6. I tried to release it by 'RIGHT CLICKING'
       It waited for few seconds with the message....."code inspector checks running.".
       Then it failed with an error message as follows
       Error in pre-export methods for request EC1K900083
      NOTE: I have made sure that everything is activated properly, since I read on a forum that this
                 error may occur if something is not activated properly. So I have done this step over
                 and over again making sure that everything is activated properly.
    7. I then started Transaction 'SE09' and saw the request 'EC1K900083' under the released tree with a 'CHECK' Mark.
    However, when I sent to /usr/SAP/trans/data and /usr/SAP/trans/Cofiles, I didn't find the transport data there.
    Has anyone done this before and if so what am I doing wrong? Your suggestions or feedback will be highly appreciated.
    Thanks
    Ram

    Hello Friends,
    Thanks for all the responses. I got the following response from SAP TECH SUPPORT which is not very encouraging and so I am just closing this.
    Thanks
    Ram
    ===========================================================================
    30.04.2009 - 11:40:29 EST - Reply by SAP
    Dear Mr Ram,
    Thanks for explaining it once again.
    The package is just container for development objects that belong together, in that they share the same system, transport layer, and
    customer delivery status. Please check the below link http://help.sap.com/saphelp_nw70/helpdata/en/ea/c05da3f01011d3964000a0c94260a5/frameset.htm
    As I understand correctly you want to 'export' your development outside of your SAP system domain. For that either you can do it using 'Externalsystems'. 'External systems' are a special form of virtual systems. A real SAP System is used in their place to perform actions on the transport directory. They are different from virtual systems in that they have their own transport directory that you can freely choose, you can use external systems to:
    -Write transport requests to exchangeable data media
    -Read transport requests from exchangeable data media
    -Send transports to other transport domains using an intermediate directory
    -Send transports to other transport domains using an intermediate directory
    If you want to transport between systems in different domains, we recommend that you link domains with 'domain links'. There must be a
    permanent network connection between the systems in the two domains, similar to the connection between systems within the same domain.
    I would recommend to take a look in the documentation available in SAP Online help for further information on how to setup this
    complex transport landscape. I hope this information helps you to setup the transport system.
    Or you simply create a transport request of type 'transport of copy' and input target system and client (which you should know) system as
    target system include the objects (bapi) in the request. This ensure that requests will only be imported into that system. Other systems willnot be touched.
    'Transport of copies' type transports do not get automatically added to the next buffer after they have been imported into a system. When creating a 'Transport of copies' transport the target system must be specified as this type of transport does not respect the defined transport routes outlined in TMS.
    You can use this request type to transport objects to a specified SAP System using Transports of copies. The objects are transported with the version they have in the current SAP System. The original location of the objects remains unchanged. There is no delivery to another SAP System.
    But we at AGS we cannot suggest, as the nature of your request indicates this is a consulting issue rather than a software error.
    Customer Support's charter, under the SAP maintenance agreement, is to handle software or system defects in the standard delivered R/3 product. Please refer the note 1054121.
    So you have to seek assistance from SAP's Remote Consulting Service which is billable.
    I am sorry that I could not give you more positive reply in this case.
    With warm regards,
    Sajiv
    Active Global Support - Technology
    =========================================================================

  • How to transfer ABAP query from one server to another server

    Hi all,
    I have a ABAP query in development server and i need to transport it to production server.
    I have attached a transaction to it using the program which got generated in the back ground
    from the abap query in the developemnt server.
    I have downloaded and uploaded  a ABAP query from one server to another server.
    But the program which got generated in the back ground in the production server is different from
    program which is generated in the development server.
    But my transaction is attached to the program in the development server.If i transport the transaction
    to production server,it is giving error since that program is not present in the production server.
    Am i going in the right way......? 
    Is there any problem in my upload/download procedure ?
    Is there any way to achieve my purpose ...............?
    Please kindly reply me at the earliest.

    You have different ways to call a query using a t.code. One way is to create a pgm with the following code and attach a t-code to it.
    data: gv_test type sy-repid.
    DATA: GV_USERGROUP TYPE AQADEF-BGNAME VALUE 'FI',
          GV_QUERY TYPE AQADEF-QUNAME VALUE 'ZCON_FI_QUERY',
          GV_RNAME TYPE AQADEF-PGNAME .
    CALL FUNCTION 'RSAQ_REPORT_NAME'
      EXPORTING
        WORKSPACE        = ''
        USERGROUP        = GV_USERGROUP
        QUERY            = GV_QUERY
    IMPORTING
       REPORTNAME       = GV_RNAME
    * For the dynamic excution of the called query assisgn GV_RNAME to <gv_test>.
    gv_test = GV_RNAME.
    SUBMIT (gv_test) via selection-screen and return.
    Alternate way is while creating T-Code you choose option Transaction with parameters.
    Transaction as START_REPORT and in default values table control at bottom give as follows
    D_SREPOVARI-REPORTTYPE = AQ
    D_SREPOVARI-REPORT = User group
    D_SREPOVARI-EXTDREPORT = Your Query name
    Regards
    Sathar

  • Transport a request from one server(quality) to another server(production)

    Hi All,
    I want to transport a request from one server(quality) to another server(production)
    Can we transport a request from quality to production programatically i.e. by using programing logic.
    Regards,
    Swarup

    Hi,
    It cannot be done programmatically. Although it can be automated by basis guys. They configure it in TMS (Transport Management System). You can check it using STMS. (if you are authorized to view it).
    Transport path are defined in TMS.
    For Automated Transport configuration is done in TMS.
    Generally automatic Transport are not setup between quality and production. Changes are first tested in Quality and then Transported by basis team either periodically / individually.
    In case of manual transport Transport Request can be imported in production using STMS_IMPORT transaction in production. (Basis guy will do it for approved Transports)
    If there is no direct connectivity - Basis people copy "data" file and "co" file and Transport it to target server (This is generally not the case in Quality - production as Transport path is always defined).
    Regards,
    Mohaiyuddin

  • How do we migrate the OWB mapping from one server to another server?

    Here is my situation.
    Source server
    ================
    Project name : SOURCEOWB
    Under this project, we have two module(MBTSOURCE, MBTTARGET).
    In connection explorer, the locations are DW_MBT_SR, DW_MBT_TR.
    We have 15 mappings on this project.
    Source schema name is TXMBT_DW.
    Target schema name is MBTTX_DW.
    I want to migrate the whole thing to new server.
    Here are the info about target location. After migrating to new server, i need to rename
    as below.
    Project name : CA_SOURCEOWB
    Under this project, we have two module(CA_MBTSOURCE, CA_MBTTARGET).
    In connection explorer, the locations are CA_DW_MBT_SR, CA_DW_MBT_TR.
    Source schema name is CA_TXMBT_DW
    Target schema name is CA_MBTTX_DW
    Here are my steps i followed.
    ===============================
    1. Created the source and target schemas in new machine.
    2. Create a new workspace
    3. Export the mapping with dependent objects from source server and imported in new server.
    4. changed the source and target location successfully.
    5. Renamed the project namd, module names as i needed successfully.
    But only issue is, i am not table to change the location name.
    Again, i tried the below steps.
    1. uninstall the workspace and create the workspace
    2. create source and target locations as i needed(CA_DW_MBT_SR,CA_DW_MBT_TR).
    3. import only mapping
    4. Able to register the mapping
    Here i am not able to configure the module for newly created locations.
    I right clicked on module and click Configure, go to Stream Administrator and not able to find
    the source and target locations over there.....
    How do we resolve this?
    My data warehouse is runing for each state. I want to copy one state mapping and import into
    another state and customize the mapping. I have hard time to change the location name. Because,
    location name has state code. I can not use the same location name for all other state.
    Any help is highly appreciated.

    Hello Oleg, Thanks for your input.. It helps... but the problem is not completly solved.
    let me explain my whole steps. Plesae review and let me know if i missed anything.
    1. Created new workspace. the workspace is successfully created.
    2. Login to new workspace.
    3. Go to Locations, create source location(entered host name,username, password etc)
    4. Created target location(entered host name,username, password etc), go to db connector on target location, created new db connector and linked the source location here.
    5. Exported mapping and import into new workspace.(I can not use the location name in the exported workspace).
    6. Renamed the project name, module name as i needed.
    7. Double click the module name under Oracle and changed the meta data location and data locations.
    8. Right click on soure and target module and click configure, change the the location and streams administrator.
    9. Right click on mapping and go to configure, go to table operators and change the location as i need.
    10.Right click on target module(under oracle), click generate. On this step, i get the below error
    VLD-1141: Internal error during mapping generation.
    Java.lang.ArrayIndexOutOfBoundsExeception
    11. Go to control center, register the source and targert and followed the step 10. I get the same error.
    I am almost close to complete this task. But i got stuck in the last step.

  • Exporting Data from one Server to Another server w/ Version Enabled Tables

    Hi,
    I'm currently having a problem with regards to Exporting data to another server. This is the Scenario:
    Source Server is Production Server with all of its Tables in the Schema are Version-Enabled.
    Destination Server is a Test Server.
    I exported data from Production Server using EXP command. Then in my Test Server I imported my data using IMP command (I already created tablespace and user for the Schema).
    Import is successful in my Test server but when I execute my queries, There are no rows returned.
    I checked my _LT tables and it contains my data. but when I query from the View created when version was enabled, no result is returned.
    Am I missing something when I exported and imported my Schema? Should I have included the WMSYS schema when I created the .dump file?
    Thanks in advance.

    Hi Stefan,
    we tried using Export and Import using Data Pump.
    expdp system/password@orcl full=y directory=dmpdir2 dumpfile=FULL_DB.dmp
    impdp system/password@orcl full=y table_exists_action=truncate directory=dmpdir2 dumpfile=FULL_DB.dmp
    Still the same result as using exp and imp. _LT tables have data but when you query using the View, no results are found.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Move Central Instance to Another Server

    Hello expert,
    Now we have a distributed system: CI on server 1, DB on server 2. Now we want to move the CI to another server 3 without change the DB server.
    We get some information from link Move the central instance to another server in SAP
    We have few questions:
    1. Can we change the SID of CI with method provided in link?
    2. Any other additional steps should we do?
    Thanks & Best Regards,
    Tong Ning

    Hi Tong,
    You can install a new SAP instance (CI) on the new server as your DB is not moving and is on different host, and replicate important files from your old CI host.
    For eg, the host file, services file, trans directory and some work directory contents.
    Also, if your server on same OS or different ?
    You should check the compatibility of new OS and DB in service market place (PAM).
    For changing SID, please use standard guides and tested WIKI links.
    Regards,
    Divyanshu

  • How to move set of FND Message from one server to another server

    Hi,
    I am having a request need to transfer all customized FND MESSAGES from one server(developing server) to another server (client server). Tell me the possible ways to do this in Oracle R12.
    Thanks
    Vivek
    Edited by: 912882 on 4 Aug, 2012 2:54 PM

    This is a two step process. but for this you need to ensure that all your custom messages were created in custom application say XXC
    download all the mesages by typing the below command from the developing server unix box
    FNDLOAD apps/$CLIENT_APPS_PWD 0 Y DOWNLOAD $FND_TOP/patch/115/import/afmdmsg.lct XXC_CUSTOM_MESG.ldt APPLICATION_SHORT_NAME='XXC'once this command is successful you will get the definition and data in file XXC_CUSTOM_MESG.ldt.
    Place this file in the main server unix box and run the below command :
    FNDLOAD  apps/$CLIENT_APPS_PWD 0 Y UPLOAD $FND_TOP/patch/115/import/afmdmsg.lct XXC_CUSTOM_MESG.ldt - CUSTOM_MODE=FORCE

  • How to copy module pool prog one server to another server

    hi Experts,
    hi how to copy  the module pool prog(mpp)  one server to another server , like download and upload , in this i have 10 screen pbo , pai, includes , , in  this mpp
    will have other tcodes also ..
    is this possible ,  if yes how give me step by step process
    pls do help me in this requirment .
    thanks in advance ,
    m venu

    Do you have the ability to import a transport into your second server?  The easiest way to accomplish this is to create a Transport Request in your originating system, release the transport, and have you basis admins import it into the second server.
    Regards,
    Chris H.

  • Client copy to another server

    I would like to copy client from one server to another server.I beleive i can use client export/import for the copy but my question is that did i need to do any connection between two servers??

    Hi Samson,
    For an e.g If you are using two system landscape i.e DEV & PRD system .Then perform below steps to maintain TMS in your landscape.
    1.On DEV server ---> Use client 000 with user DDIC/<password>.
    2.Execute SE06 --> Choose std system installation & perform post installation actions.
    3.Execute STMS & maintain/save it as a domain controller.
    4.Under STMS --> system overview maintain a virtual system entry for PRD & maintain transport routes
    On PRD end:
    1.Execute STMS & choose to add in transport domain controller.
    Hope this will help you,also you'll get lots of step by step execution material to maintain TMS on internet.
    Regards,
    Gaurav

  • RAID 5 with OS recovery another server different hardware

    Hi thanks in advance
    I have a serious problem, is this hope can help me or direccionarme
    We had a server with RAID May 4 full disks, raid hardware, in this arrangement the operating system, weblogic, oas, base data base software and data files, and others are included.
    The server was Red Hat 4 update 3 we know the distribution and mounting points.
    now the server is physically damage are only 4 disks, mount the arregloo quicimos another server but the hardware is different. We are at the point where we import the raid 5, and got on the new server but does not rise. we tested with a bootable linux from CD discs and can see but can not access the raid.
    Any idea that we can provide.
    Thank you.

    Hi,
    raid hardware
    It is like Dude said, and of course must have the same driver version.
    Best regards

Maybe you are looking for