Impossible Upload files with Filezilla FTP Client after upgrade win8 to win8.1

Hi
Things were working fine with win 8 but, after Upgrade to win 8.1 is not possible upload files with Filezilla FTP Client.
is there anyone facing same problem?
thanks in advance for any answer to help me solve this issue
Regards
TC

Hi,
Please Change your transfer settings in site manager from either default or passive to active it to see what's going on.
Also, check IE compatibility mode.
In addition, I suggest you install all latest updates for Windows since these updates will improve and fix some known issues.
Kate Li
TechNet Community Support

Similar Messages

Cannot configure wrt54gs v6 router for use with filezilla FTP client

I am new to working with FTP and very rusty on networking in general. I just downloaded filezilla to create a FTP client on my desktop. When I run their wizard, it says the connection is tainted by my router. All the forums for filezilla say I need to configure my router to allow traffic on either port 21 (ftp) or a range of ports ( they suggest 50000 to 50100).
Please let me know what I need to do to make this work
thanks in advance
ldygunner

To answer your other questions, the tutorials have it all wrong. What they really need to explain, but fail to do so, is that the only situation where a FTP client would need to use active mode (the PORT command) is where the FTP server can't accept inbound connections on arbitrary port numbers. But that's a pathological case anyway: the FTP server can always accept connections on some well defined set of port numbers, to keep its own local firewall or NAT router happy. Consequently, there is really no need at all for a FTP client system to open up any ports to support active mode, rather than always operate in passive mode (as browsers do.)
The fact of the matter is that if passive mode works in a browser for you, it will work for Filezilla also.
And the configuration tests it runs are brain damaged. Even though the wizard recommends passive mode, it never tests for it. And it doesn't really test active mode either. What it really tests is whether anything between the client and the server is "transparently" translating IP addresses and port numbers. Such a test is broken, because the mere fact of port numbers being rewritten in TCP packets is irrelevant to whether PORT (active mode) will succeed or fail.
For completeness, in case someone decides to get pedantic, there is a case where a FTP client system would need the active mode PORT command to work, but that case is now of historical interest only. It's a scenario that FTP servers no longer support, for security reasons. (What is it? When the FTP client is operating as a controller to remotely transfer files between two servers: it tells one server to use passive mode, and sends the address/port it gets to the other server in active mode, which in theory would make the second server open a connection to the first. This, in fact, is why two modes, active and passive, were originally defined in the FTP standard!) And it still wouldn't need open ports on the client system.
Message Edited by arayq2 on 10-19-2008 09:12 PM

Problem upload file with ftp

Hi,
I'd like to upload a file with an ftp. I declared a method using an url as follow :
public static void uploadFile(File fileToMove_p, String newFileName_p) {
try {
URL url_l = new URL("ftp://[uid]:[pwd]@localhost/" + newFileName_p);
URLConnection connection_l = url_l.openConnection();
OutputStream output_l = connection_l.getOutputStream();
BufferedOutputStream bos = new BufferedOutputStream(output_l);
BufferedInputStream bis = new BufferedInputStream(new FileInputStream(fileToMove_p));
int i;
while ((i = bis.read()) != -1) {
bos.write(i);
catch (IOException ex) {}
But when I oppen my new file, it miss the end of my data. The ftp cut the few last line of my original file.
Any idear of what is happening here and how I can solve the problem ?
Thanks

Are you closing the OutputStream? If not, you probably should, and closing the stream will flush it prior to closing.
HTH,
§

Problem in Uploading Files with Categories

Hi All,
We are working on uploading files to Content Database(CDB) after creating categories for all files to be uploaded individually. The code is working fine when we are using FdkConstants.ATTRIBUTE_TYPE_STRING for Attributes.ATTRIBUTE_TYPE while creating named-value pair for categoryAttributes. In this case all the files are uploading with category.
But the problem we are facing is, when we use datatype other than STRING for FdkConstants like FdkConstants.ATTRIBUTE_TYPE_INTEGER, or FdkConstants.ATTRIBUTE_TYPE_BINARY…….. category sub class is not creating, and getting errors like
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: ORACLE.FDK.MetaDataError:ORACLE.FDK.MetadataOperationFailed
faultActor:
faultNode:
faultDetail:
     {http://xmlns.oracle.com/content/ws}fault:<detailedErrorCode xsi:type="xsd:string">ORACLE.FDK.MetadataOperationFailed</detailedErrorCode><errorCode xsi:type="xsd:string">ORACLE.FDK.MetaDataError</errorCode><exceptionEntries xsi:type="ns1:ArrayOfFdkExceptionEntry" xsi:nil="true"/><info xsi:type="ns1:ArrayOfNamedValue" xsi:nil="true"/><serverStackTraceId xsi:type="xsd:string"/>
     {http://xml.apache.org/axis/}hostname:bluejays.appsassociates.com
ORACLE.FDK.MetaDataError:ORACLE.FDK.MetadataOperationFailed
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
     at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:104)
     at org.apache.axis.encoding.ser.BeanDeserializer.<init>(BeanDeserializer.java:90)
     at oracle.ifs.fdk.FdkException.getDeserializer(FdkException.java:270)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.axis.encoding.ser.BaseDeserializerFactory.getSpecialized(BaseDeserializerFactory.java:154)
     at org.apache.axis.encoding.ser.BaseDeserializerFactory.getDeserializerAs(BaseDeserializerFactory.java:84)
     at org.apache.axis.encoding.DeserializationContext.getDeserializer(DeserializationContext.java:464)
     at org.apache.axis.encoding.DeserializationContext.getDeserializerForType(DeserializationContext.java:547)
     at org.apache.axis.message.SOAPFaultDetailsBuilder.onStartChild(SOAPFaultDetailsBuilder.java:157)
     at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1276)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:324)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:291)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:207)
     at oracle.xml.jaxp.JXSAXParser.parse(JXSAXParser.java:292)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at oracle.ifs.fdk.CategoryManagerSoapBindingStub.createCategorySubClass(CategoryManagerSoapBindingStub.java:611)
     at oracle.ifs.fdk.client.impl.CategoryManagerProxy.createCategorySubClass(CategoryManagerProxy.java:100)
     at scheduleUpload.AarlmsUpload.createCategory(AarlmsUpload.java:851)
Can anyone please solve our problem why this is happening? Please give solution as early as possible.
Thanks in advance
Eswari

Hi Shashikumar,
Can i have your mail id.
I have some documents on bid process.
Best Regards,
Anil Rajpal

Get Uploaded File Mime Type and Client Filename

Anyone know how to recover an uploaded file MIME type and
client file name?
I'm writing my own cfx tag to process file uploads and pretty
much have it figured out except to determine the name of the client
file and mime type. The formfield file variable value contains the
path/filename to the CF temp directory, but I need the MIME type,
filename, etc. that is contained int he HTTP Header
(e.g. Content-Disposition: form-data; name="Image";
filename="C:\test.JPG"
Content-Type: image/pjpeg
[empty line])
I'm using the getHttpRequestData() functiont, but it only
gives me the content-type multipart/form-data, leaving out the Mime
type and Content-Disposition (which contains the client file name).

Hi Daniel,
do you use EPG, mod_plsql or APEX Listener? Have you changed the connection mechanism after upgrading to 4.2.1?
If you use the APEX Listener, which version do you use? Which browser and version do you use to upload the file? Does it reproduce with other browsers as well?
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

FTP issues with DW CS5 that don't happen with an FTP client or MX

On a mac OS 10.6.4, using DW CS5 to login to an existing site using FTP. It connects fine but then all I get is a .txt file with a note indicating that FTP can't be used when Frontpage extensions are activated. I checked on my webserver status (at 1&1) and they aren't active. So I tried with an FTP client like cyberduck and all the files are there. Likewise, I used an old version of DW (think it was MX vintage 2002) and all the files show up server side just fine - (I just can't download the site due to version incompatibility so DW rejects it). Does anyone know what could be going wrong here? As far as I know the site was created by DWMX (think that was 2004). Thanks

I assumed that if I was using an older version of DW then it wouldn't download pages authored with a later version but I guess it's just code...
Yep - it's just text files containing HTML, CSS, javascript, and links to other files.
When using FTP through DWMX I see the server side of the site
You can see the files listed on the remote server?
I can send you the details if you wish, I'm not sure what's going on here...
You can try sending to forums at domain dot com (replace 'domain' with 'great-web-sights')

How do I upload files to an FTP Site in Leopard

I am unable to upload files to an ftp site that was set up for me. I have read write permissions. I can pull files from the site but I cannot upload or place files on the site. The site was tested and is working for pc's

Colonno wrote:
Thanks - I am not really versed in ftp so I am not sure where to start without some direction. Maybe 3rd party software is the answer. I went into the terminal without much success.
The third-party utilities are largely as easy as drag and drop.
Free: Cyberduck
Paid: Transmit (excellent), Interarchy

Logic to upload file with dynamic columns

hi
in my requirement i hav given to add logic to upload file with dynamic columns so that this upload program can be reused.
this way the program is flexible, irrespective of the number of columns in the file.
can any one explain this?
and let me know what actually i hav to do.

Check the program and the dynamic column is in the col_pos internal table and in the routines get_structure onwards.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/scm/dynamic%2bstructures%2band%2bcomponents
cheers
Aveek

How do I transfer files via Filezilla ftp behind a linksys router?

I have allowed access for my ftp client though my firewall, but I cannot figure out how to allow access for the Filezilla ftp client. Your help is appreciated.

Make sure it works from modem directly. To forward ports manually, open setup page of router using http:// 192.168.1.1 in the address bar by giving password admin keeping username blank.Go to Application & Gamings tab & forward ports for assigned static ip of your computer on which you want to access the filezilla ftp.

Upload files with swedish characters NS 4.7

Hi,
I can upload files with swedish characters in the file name with IE 5, but not with Netscape 4.7. iFS presents an error message that the file doesn't exist or is empty.
Is there a solution for this problem?
/Elin
null

check out if you are using javascripts and whether IE supports it
Roberto Nanamura <[email protected]> wrote:
>
Hi,
I am having a problem uploading files with Internet Explorer, it works with
Netscape Communicator. Has someone had the same problem?
I am using WebLogic 5.1 service pack 5 with Netscape iPlanet 4.1 service pack 2
in a Solaris 7.
Best regards,
Roberto N Nanamura
Technical Consultant
Summa Technologies

Upload files with international content

I want to upload files with international content(many languages), from
a single JSP. Any ideas?
thanks,
M.

Hi Marco,
I dont know transaction CV02N. But if this application uses standard function modules like GUI_UPLOAD it should work with ITS. A special configuration should not be required as long as the files have a size up to 5 MB. If they are larger it might be required to adjust the size of the request container MaxReqSize. Dont forget that Java has to be activated to let webgui access the filesystem.
Regards,
Klaus

How to associate an uploaded file with form data

I have a "ticketing" app which stores a ticket no. as well as allows users to upload multiple files per ticket. The problem I am having is how to associate an uploaded file with a particular ticket no. As you can guess this becomes complicated when the same user can potentially update multiple tickets using the same file names. I am having difficulty trying to understand how to associate a ticket no with one or more uploaded files. I do have a custom table which I update with the attachments but I am unsure how to, or when to, update the ticket information on this custom table. I only want to retrieve attachments for a given ticket, not all attachments uploaded by a user.Does anyone have any ideas?

Hi,
My question is bit related to this topic.
I am having a requirement to upload the CSV files so that they will store in a database table and later on wards when they search on that table it needs to pull the information and display on the form. I am a new bee to application express. Could some body tell me how to start this process with??. Just give me an overvoew/hints so that I will try to carry on my own.
Cheers,
Krishna.

Tpnotify with TPACK flag hangs after upgrading to Tuxedo 12c RP020

Hi,
We are experiencing issues with tptonify with TPACK flag set after upgrading to Tuxedo 12c. Looks like tpnotify is not returned or reporting errors. Is there anything to do with "009. Bug16506218 - TPNOTIFY WITH TPACK FLAG THROW OUT EXCEPTION"? Is there any documentation about the new flag TPACK_INTL?
Thanks

Hello,
If all you have done is upgrade to Tuxedo12 the behavior should be the same. The TPACK flag definition is:
"The request is sent and the caller blocks until an acknowledgement message is received from the target client"
Is there any additional change(e.g. in your client) you have made?
What Tuxedo version are you upgrading from?
The bug 16506218 fix was for a jolt client exception and a JSH failure.
Do you see an error or is the process which executes tpnotify() just hanging/blocking waiting for the ack message?
The flag that you mention is actually an undocumented customer requested enhancement that went into Tuxedo 10.3.
Are you using it? Using it changes the tpnotify() behavior dependent upon the client status.
Regards,
Bob Finan

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Impossible Upload files with Filezilla FTP Client after upgrade win8 to win8.1

Similar Messages

Maybe you are looking for