In alv , how can i display message like 'NO records in the table'in spool

When there are no any records , i have to display a message in spool like 'No records exist'.
how can i do this?/
Thanks,
Suresh.

hi check this..
if the final internal table is empty then you will show like this..
if not it_final[] is initial.
call function reuse_alv_list_display.
elseif.
message s000 with 'no data available for the selection'.
endif..
regards,
venkat

Similar Messages

How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?

I like the bookmarks on the left side of the screen. I don't want to be navigating through a tree of all of my various bookmarks. How can I display all of my bookmarks along the left side of my browser window like earlier versions of Firefox?

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
*https://support.mozilla.com/kb/how-do-i-use-bookmarks

Webdynpro ABAP - ALV how can i display Total of Column

Hi friends,
Webdynpro ABAP - ALV how can i display Total of Columns.
Please tell me any metod is there or any solution.
Thanks,
Kumar.

Hi
You can take help of following code snippet to create totals for a particular column
Data: lr_function_settings TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_column          TYPE REF TO cl_salv_wd_column,
        lt_column type salv_wd_t_column_ref,
        ls_column type salv_wd_s_column_ref.
Data: lr_field_amnt type REF TO CL_SALV_WD_FIELD.
* get reference of ALV component
lr_salv_wd_table = wd_this->wd_cpifc_OVERVIEW_EARNED_ALV( ).
wd_this->alv_config_table = lr_salv_wd_table->get_model( ).
* get function settings
lr_function_settings ?= wd_this->alv_config_table.
* display columns in correct order
lr_column_settings ?= wd_this->alv_config_table.
lt_column = lr_column_settings->get_columns( ).
loop at lt_column into ls_column.
CASE ls_column-id.
when 'AMOUNT'
* aggregate field
        CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_FIELD_SETTINGS~GET_FIELD
          EXPORTING
            FIELDNAME = 'AMOUNT'
          RECEIVING
            VALUE     = lr_field_amnt.
* create aggregate rule as total
        CALL METHOD LR_FIELD_AMNT->IF_SALV_WD_AGGR~CREATE_AGGR_RULE
          EXPORTING
            AGGREGATION_TYPE = IF_SALV_WD_C_AGGREGATION=>AGGRTYPE_TOTAL
          RECEIVING
            VALUE            = lv_aggr_rule.
endcase.
Regards
Manas DUa

How can be display message in report

Hi i am filling custom database table from internal table. i want to display that how many entry have been inserted with the help of message.
count type c.
DESCRIBE TABLE IT_CHDOC LINES count .
CONCATENATE 'No.of entry to be inserted is - ' count INTO MSG SEPARATED BY ' '.
I am using following message but above 9 it will not display number. when i am taking count type i then it is giving error count should be c,n d t.
SO please give me soluction how can display number of record have been inserted with the help of message

Hi,
The type of count should be i.
But for using concatenate statement you should need type c.
So in the describe statement use the type of count as i.
Declare one more variable of type c and length 6 and move the value of count in it and then use thsi variable in concatenate statement.
take length as 6 if you feel that the records in the table may not cross 999999 else increase the lenght.
Regards,
Ankur Parab

How can i display a CheckBox in one of the column of ALV?

Hi All,
I want to dispaly a one column of CHECKBOXes in my ALV Report.so i take attribute CHK_BOX TYPE CHECKBOX in the context.when i testing it doesn't showing any checkboxes.just i shows a ordinary column with name checkbox.
How can i resolve it?
Regards,
Ravi

Hi Ravi,
Do the following to set any alv column as Check box .
create an instance of ALV component
DATA:
    lr_salv_wd_table_usage TYPE REF TO if_wd_component_usage,
    lr_column_settings     TYPE REF TO if_salv_wd_column_settings,
    lr_input_field         TYPE REF TO cl_salv_wd_uie_input_field,
    lr_chk_box             TYPE REF TO cl_salv_wd_uie_checkbox,
    lr_table_settings      TYPE REF TO if_salv_wd_table_settings,
    lr_salv_wd_table       TYPE REF TO iwci_salv_wd_table,
    lr_column              TYPE REF TO cl_salv_wd_column.
lr_salv_wd_table_usage = wd_this->wd_cpuse_alv( ).
IF lr_salv_wd_table_usage->has_active_component( ) IS INITIAL.
    lr_salv_wd_table_usage->create_component( ).
ENDIF.
lr_salv_wd_table = wd_this->wd_cpifc_alv( ).
wd_this->alv_config_table = lr_salv_wd_table->get_model( ).
lr_table_settings ?= wd_this->alv_config_table.
* Set ALV as editable
lr_table_settings->set_read_only( abap_false ).
* Get Column reference
CALL METHOD wd_this->alv_config_table->if_salv_wd_column_settings~get_column
    EXPORTING
      id    = 'CURR_ISO'
    RECEIVING
      value = lr_column.
* Create a checkboc
CREATE OBJECT lr_chk_box
    EXPORTING
      checked_fieldname = 'CURR_ISO'.
* Set the cell editor type to the check box.
CALL METHOD lr_column->set_cell_editor
    EXPORTING
      value = lr_chk_box.
and to set the check box as editable, do the following.
lr_table~IF_SALV_WD_TABLE_SETTINGS~SET_READ_ONLY( abap_false ).
Hope this helps.
Regards,
Sravan Varagani

How can Maximum Display Time in Chart Recorder be increased to hours/days?

Error message displayed when Recorder Display Time (X-Axis) is increased beyond ~0.25 hours, saying maximum display time has been reached. MUST be able to display time in range of days - although since data display rate (not Dasylab sampling rate, display rate separately controlled through pulse generator) is very slow (i.e. 1 sample/5 minutes, 0.0033Hz) total data quantity is not large.
Please help..there must be a way around this!! Thanks

The maximum display time in the Chart Recorder is based on a computation of how much memory is available to be allocated. The computation includes the block size, sample rate, as well as the amount of memory on the computer.
To display more time, you must reduce the amount of data to reduce the effective sampling rate being charted. You can use the Average Module or the Separate module to accomplish this.
There are some conditions where the actual sampling rate and the channel sampling rate are not the same - triggered data is an example of this, and data from the RS232 Input and ICOMS Input may be labeled in a way that leads the Chart Recorder to believe that the data channel has more data than it does.
Please provide more information about your application - what is the data source of the data that you are displaying, what is the sampling rate and block size? How much memory does your computer have?
--cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

How to set a Excel-like column-Filtering in the Table Header using swings

I am currently working on the Database applications.Where i need to do column filter in the header field of the jTable, (i.e i need to keep a button in the Column header and when i click the button, it should pop-up a jList which has a unique values of the entire column. when i select that value it will show corresponding rows in the jTable). Can anyone pls help me....
Thanks
Karthik

You can [get the table column header|http://java.sun.com/javase/6/docs/api/javax/swing/JTable.html#getTableHeader()] and add a mouse listener to it which waits for a popup menu trigger to display a popup menu.
In that popup menu, you can display a list which contains the unique values of the column which was clicked on. Once a value is
selected, you can filter the rows using that value.

How can I display a SP 2010 out of the box workflow's task assignees via powershell?

There are days where one of the 250+ workflows at the site has attempted to send email to someone no longer at the company.
I would like to find a way to go through the farm and display all the list URLs that have workflows, and the mail addresses associated to the workflows.
This way I can track down the workflows that need to be updated to remove the missing users.
I have started a bit of script to do this. In my script, I just had a site collection - I figured that if I can get that to work, then surely wrapping another loop for the rest of the farm won't be bad.
However, for some reason, I am not seeing the output that I expected to show the mail addresses.
I am hoping a different set of eyes might see what I am missing. It was my understanding that the AssociationData property was XML that contained information about the assignees for tasks, the carbon copy list, etc.
Maybe I misunderstood something that I read?
$outLoc = "d:\temp\wfdata.txt"
$web = Get-SPWeb -Identity "http://myfarm/sites/it/"
foreach ($list in $web.Lists)
$associationColl=$list.WorkflowAssociations
foreach ($association in $associationColl)
$association.AssociationData | Out-File $outLoc
$web.Dispose()
I want to thank you for the helpful tips that so often appear on this list. They help me when I am reading over old threads to figure out what to do. I am hoping that tips on this thread will likewise be helpful.

Hi,
With
SPWorkflowAssociation.AssociationData property, we can get the assignees’ information. Your script can
be able to retrieve a XML format data which contains the user name we need:
So the next step would be getting the user name by parsing the XML data we got.
The two links below will show how to parse XML with PowerShell:
http://stackoverflow.com/questions/18032147/parsing-xml-using-powershell
http://blogs.technet.com/b/heyscriptingguy/archive/2012/03/26/use-powershell-to-parse-an-xml-file-and-sort-the-data.aspx
With the user name, we can get the
Email property of an user with the scripts as the link below provided:
http://davidlozzi.com/2012/03/07/using-powershell-to-access-sharepoint-sites/
Best regards
Patrick Liang
TechNet Community Support

How can you display a dynamically loaded vi to the Web Server?

I am working with LabView 6.1 and the Web Server. I can call a subvi and have it display on a remote machine using a browser with no problem. But what I would like to do is dynamically load and run a vi and have it display on the remote computer using only a browser. I have tried a small example of a front panel that invokes the run vi method (and fp.open prop) on another vi when a button is pressed, but the invoked vi is displayed only on the local computer. Is there any way of viewing dynamically loaded vi's on a remote machine without having a copy of LabView running on it?

If i understand your question correctly, you want to monitor vi that are dynamically loaded on a remote machine without having LabVIEW installed on the machine from witch you want the monitor. I don't think it's possible how ever a good reference book would be Internet applications in LabVIEW. You can find it on BARNES&NOBLE.
Hope i could help

How can I display a list of records from a JSP to my Midlet ??

Hi there !
I'm new in J2ME. I have been strugling with this problem for weeks now. All I find on the net is some theory and is not helping me much. Here the deal
I have created a Midlet that shoud display a certain list which is from the remote database. The list comes from a JSP file in the server. When I use the browser I can see the list.
The problem comes when I have to take the same list and output it in my midlet file. Then finding the selected index of the selecte item of the same list and using it somewhere else.
I would appreciate it if somone could help me !!
My head is speaning now !!! If you want me to post my code so one could identidy the proble, I don't mind !! Help please !!

Here is my Code !!
             String url = "http://10.2.25.3:8080/CreateAppointment/doctorsList.jsp";
    String dateUrl = "http://10.2.25.3:8080/CreateAppointment/date.jsp";
   String myUsername,myPassword;
   // Custom declaration code starts here
   public CreateAppointment_GUI()
            //Creating a login Form
            loginScreen = new Form("Login");
            //Login form Textfields
            username = new TextField("Username:", null, 200, TextField.ANY);
            password = new TextField("Password:", "Initial text", 200, TextField.ANY|     TextField.PASSWORD);
            loginScreen.append(username);
            loginScreen.append(password);
            //Adding the commands
            loginScreen.addCommand(loginCommand);
            loginScreen.addCommand(cancelCommand);
            loginScreen.setCommandListener(this);
            loginScreen.setItemStateListener(this);
            // Creating my selection list
            String[] selectionList = { "1.Appointments", "2.Add New Patient", "3.Patient Details" };
            listSelectAction = new List("Select Action", List.IMPLICIT, selectionList, images);
            listSelectAction.addCommand(backCommand);
            listSelectAction.addCommand(nextCommand);
            listSelectAction.setCommandListener(this);
         public void startApp() throws MIDletStateChangeException
           display = Display.getDisplay(this);
           display.setCurrent(loginScreen);
        public void pauseApp()
        public void destroyApp(boolean unconditional) throws MIDletStateChangeException
             notifyDestroyed();
        public void itemStateChanged(Item item)
   void getDoctors(String url) throws IOException {
                HttpConnection connection = null;
        InputStream is = null;
        OutputStream os = null;
        StringBuffer stringBuffer = new StringBuffer();
        TextBox textBox = null;
        String newStr =null;
        String newStr2=null;
        Vector v = new Vector();
       try {
          connection = (HttpConnection)Connector.open(url);
          connection.setRequestMethod(HttpConnection.POST);
          //connection.setRequestProperty(String key, String value)
          connection.setRequestProperty("IF-Modified-Since","20 Jan 2001 16:19:14 GMT");
          connection.setRequestProperty("User-Agent","Profile/MIDP-2.0 Confirguration/CLDC-1.0");
          connection.setRequestProperty("Content-Language", "en-CA");
          connection.setRequestProperty("Content-Type", "application/x-www-form-urlencoded");
          os = connection.openOutputStream();
          is = connection.openInputStream();
          int ch;
          while ((ch = is.read()) != -1) {
            stringBuffer.append((char) ch);
            System.out.print((char)ch);
               }//while
          newStr = stringBuffer.toString();
                newStr2=newStr.trim();
                int start = 0;
                position = newStr2.indexOf("%", 0);
                while ((position = newStr2.indexOf("%",start)) > -1) {
                  String aName = newStr2.substring(start,position);
                  v.addElement(aName); // store the substring
                  start = position + 1; // so the next time we start checking following the space
          String[] theNames = new String[v.size()]; // create an array big enough to store the strings
          v.copyInto(theNames); // Now theNames is a String array with the list of names
           // now we can create a List using this array:
           listDoctors = new List("Select Doctor", List.IMPLICIT, theNames,null);
           listDoctors.addCommand(backCommand);
           listDoctors.addCommand(nextCommand);
           listDoctors.setCommandListener(this);
      } //try
       finally {
           if(is!= null) {
              is.close();
           } //if
           if(os != null) {
              os.close();
           }//if
           if(connection != null) {
              connection.close();
           }//if
        }//final
     display.setCurrent(listDoctors);
    } //invoke
public void commandAction(Command c, Displayable d)
                 if (c == loginCommand)
                  myUsername = username.getString();
                  myPassword = password.getString();
                     Thread thread = new Thread() {
                           public void run() {
                               try {
                                  getDoctors(url);
                                  display.setCurrent(listSelectAction);
                               }// Try
                               catch (IOException ioe) {
                                  ioe.printStackTrace();
                               }// catch
                           }// Public void
                     };//Thread
                      thread.start();
                 else if (c == cancelCommand && d == listSelectAction)
                 else if (c == nextCommand && d == listSelectAction)
                    int selectedAction = listSelectAction.getSelectedIndex();
                        Alert displayNewText =
                        new Alert("Selected","Screens are still being developed", null, AlertType.INFO);
                            displayNewText.setTimeout(1000);
                     if (selectedAction == 0)
                         Thread thread = new Thread() {
                           public void run() {
                               try {
                                  getDoctors(url);
                                  display.setCurrent(listSelectAction);
                               }// Try
                               catch (IOException ioe) {
                                  ioe.printStackTrace();
                               }// catch
                           }// Public void
                     };//Thread
                      thread.start();
                     if (selectedAction == 1)
                           display.setCurrent(displayNewText);
                     if (selectedAction == 2)
                           display.setCurrent(displayNewText);
                 }//Else
                 else if (c == backCommand && d == listDoctors)
                      display.setCurrent(listSelectAction);
                 else if (c == nextCommand && d == listDoctors)
                         Thread thread1 = new Thread() {
                           public void run() {
                               try {
                                  getDate(dateUrl);
                                  display.setCurrent(listDate);
                               }// Try
                               catch (IOException ioe) {
                                  ioe.printStackTrace();
                               }// catch
                           }// Public void
                     };//Thread
                      thread1.start();
                 else if (c == backCommand && d == listDate)
                      display.setCurrent(listDoctors);
}That is my midlet !! Now here is the code for my JSP !!
                    <%@ page import="java.sql.*" %>
<%@page import="java.util.*,java.text.*" %>
<%
String name="";
String id = "";
String connectionURL = "jdbc:microsoft:sqlserver://10.2.25.223;DatabaseName=NDOH_PAAB";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
%>
<%
try
                        Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
                catch (Exception ex)
                        out.println(ex.toString());
                        connection = DriverManager.getConnection(connectionURL,"remotepaab_user","mohwiti2004");
                        statement = connection.createStatement();
                        String mysql ="SELECT * from physicians";
                        //out.println(mysql);
                        rs = statement.executeQuery(mysql);
%>
<%
      while (rs.next()) {
             name= rs.getString("name");
             id = rs.getString("id");
             out.print(name + "%");
             out.print(id + "%");
%>
<%
%>
<% rs.close(); %>In the JSP the name variable is the one that has my List. The problem is how do I say in my Midlet = display the list contained in name. Or in id. I need to use both of them "name + id". the id I will use to find out which name a user ha selected !! Not sure how !!!
Any help would be appreciated !! Thanks !!

How can I display more than one record with result set meta data?

Hi,
My code:
    ArrayList<String> resultList = new ArrayList<String>();
    rs=ps.executeQuery();
    ResultSetMetaData rsmd = rs.getMetaData();
    while(rs.next()){
     for(int k=1;k<=rsmd.getColumnCount();k++){
        resultList.add(rs.getString(k));
    ps.close();
    }catch(Exception e){
    e.printStackTrace();
    return resultList;
    public String test(ArrayList result)throws Exception{
    String data=
        "<tr>"+
        "<td class=normalFont>"+result.get(0)+"</td>"+
        "<td class=normalFont>"+result.get(1)+"</td>"+
        "</tr>";
    return data;
    } All the things are wroking but the problem is that ArrayList is displaying just one record whereas I have more than 20 records to display. I tried with loop like: i<result.size(); and result.get(i) then its throwing exception
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 I stuck here for the last more than 2 days. Please help me
Best regards

Raakh wrote:
Still waiting .....I would have answered much earlier, but when I saw this little bit of impatience, I decided to delay answering for a while.
ArrayList<String> list = new ArrayList<String>();
list.add("abc");
list.add("def");
list.add("ghi");
System.out.println(list.get(0));
abc
System.out.println(list.get(1));
def
System.out.printnln(list);
[abc, def, ghi]That list has 3 items. Each one is a String.
But here is what you appear to be doing:
select * from person
+-----+-------------+-------------+--------+
| id | first name | last name | height |
+-----+-------------+-------------+--------+
|   1 | Joe         | Smith       | 180    |
+-----+-------------+-------------+--------+
|   2 | Mary        | Jones       | 144    |
+-----+-------------+-------------+--------+
for each row in ResultSet {
for each column in ResultSet {
    list.add(that element);
// which becomes
list.add(1);
list.add("Joe");
list.add("Smith");
list.add(180);
list.add(2);
list.add("Mary");
list.add("Jones");
list.add(144);
System.out.println(list.get(0));
1
System.out.println(list.get(1));
Joe
System.out.printlN(list);
[1, Joe, Smith, 180, 2, Mary, Jones, 144]That list has 8 items. Some of them are Strings and some of them are Integers. I would assume that, for this sample case, you would want a list with 2 items, both of which are Person objects. However, it really isn't clear from your posts what you are trying to do or what difficulty you're having, so I'm just guessing.

HT201365 I have 2 email accounts in my phone. After upgrading when I open email, both accounts are combined under "All Inboxes".How can I seperate them like they were before the upgrade.

I have 2 email accounts in my phone. A gmail acct and an Outlook acct. After upgrading to 7 there is only 1 inbox and it is titled "All Inboxes". This has combined both email accts into one list. How do I seperate the inboxes and be able to open each account seperate?

In Mail app, on the upper left side you will see <Mailboxes Click on that and you can select individual email acounts or choose to have them all in one.

How can i receive message from one phone to the other

i have iphone 4s now i want to receive one text from the another phone

Backup your iTunes library to an external drive and onto the other computer
http://support.apple.com/kb/ht1751

How can i display recent update/delete/insert records in form

Hai !!!!
i am new for forms,.......any body tell me, how can i display recent no of records updated or no of records deleted or no of records are inserted in a form. these records count are display in display items....give me detail explination......
Subbu.....

the easiest way is copy and paste the oracle-forms example from the OU.
You need form-level-trigger ON-ERROR + ON-MESSAGE, POST-INSERT, POST-UPDATE, POST-DELETE, three global variables and a procedure:
ON-ERROR
handle_message( error_code, 'ERROR: ' || ERROR_TYPE || '-' || TO_CHAR(ERROR_CODE) ||': '|| ERROR_TEXT );
ON-MESSAGE
handle_message( message_code, MESSAGE_TYPE || '-' || TO_CHAR(MESSAGE_CODE) || ': ' || MESSAGE_TEXT );
PROCEDURE handle_message( message_number IN NUMBER, message_line IN VARCHAR2 ) IS
BEGIN
    IF message_number IN ( 40400, 40406, 40407 )
    THEN
      DEFAULT_VALUE( '0', 'GLOBAL.insert' );
      DEFAULT_VALUE( '0', 'GLOBAL.update' );
      DEFAULT_VALUE( '0', 'GLOBAL.delete' );
      MESSAGE('Save Ok: ' ||
        :GLOBAL.insert || ' records inserted, ' ||
       :GLOBAL.update || ' records updated, ' ||
       :GLOBAL.delete || ' records deleted !!!' );
      ERASE('GLOBAL.insert');
      ERASE('GLOBAL.update');
      ERASE('GLOBAL.delete');
    ELSE
         MESSAGE(message_line );
          END IF;
END;
POST-INSERT
DEFAULT_VALUE('0', 'GLOBAL.insert');
:GLOBAL.insert := TO_CHAR( TO_NUMBER( :GLOBAL.insert ) + 1 );
POST-UPDATE
DEFAULT_VALUE('0', 'GLOBAL.update');
:GLOBAL.update := TO_CHAR( TO_NUMBER( :GLOBAL.update ) + 1 );
POST-DELETE
DEFAULT_VALUE('0', 'GLOBAL.delete');
:GLOBAL.delete := TO_CHAR( TO_NUMBER( :GLOBAL.delete ) + 1 );try it
Gerd

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

In alv , how can i display message like 'NO records in the table'in spool

Similar Messages

Maybe you are looking for