IN BI 7.0 INSTALLATION OF BUSINESS CONTENT

Hi All,
any body can give the infomation / steps / screenshots to install the business content objects.and what are the major changes compared to BW3.5.
plz..help me
With Regards,
Padmavati
Message was edited by:
padmavati b

Hi padma,
      Select which CUBE or ODS from Bussiness content Is matching with ur requirement... choose that.(by going www.help.sap.com)
1. and now go to RSA1 and click on BI CONTENT tab..
2.   now search that cube or   ods by giving the name in find option..
3. select that cube and drag it into right side window....
4. it will asking some options.. select all the check boxes
5. and click on install button on the top of the application tool bar in right side window..
6.it will take some time..
7. after that activating now go to info provider tab..
8. you can find ur cube there..
.. see padma.. when ever you reward points to answered people.. then only you will get more answers.. previously.. you did't give any points....
    if it will helpfull plz dont forget to Assign Points
thanks
@jay

Similar Messages

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

Installation of Business content objects

HI all
Can any one please tell me How to install Business content objects in to our Infoarea.
Thanks
S.S.

Hi Surya,
hopefully you connected you R/3-System to your BW, go to "Business Content" by transaction "RSA1" and select your BC in the shown trees. The selected BCs can be dragged-and-dropped from left to right. Switching "Simulate Installation" under the button "Install" is a good idea, more important is the option "Only necessary objects" under "Grouping" - in all other cases you would get a lot of InfoObjects, -providers and so on you never need and which would fill your system with superfluously garbage.
After a successful installation you can use all the new Objects
That's all
Ralf

0QM_DS01 Installation in Business Content

hi,
When I am trying to install 0QM_DS01, using Business content it is disabling at Installation mark and its not available in the DSO list ....Again trying to reinstall , it is taking 4-5 hours and not installing .. May I know the reason for this?
I tried 3-4 times...for installing but canot be installed

Hi,
Goto RSA1 transaction or RSOR
BW Administration ->Administrator Workbench-->Select the Business Content function area using the corresponding pushbutton --> select object types --> next select "Queries" --> search for your queries --> after selecting queries click on "transfer selection" >the queries are moved to the right hand side> here select the collection modes(automatic or manual) -->select grouping based on your requirements
select source systems ,if you do not select by default all the source systems are selected.
--.click on install -->it will prompt for a package(by default $TMP pacakge) change the package and create a transport request.
for more info check the below link
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Erros while collecting objects in installation of Business Content

Hi All,
I am trying to install the standard DSO"0BBP_SC: from the business content.I have made grouping as"data flow before",and collection mode as automatic.
While collecting the objects,when i drag and drop the DSO ,following errors are coming:-
1.Object 45EX1L0TIWA4LUWZHUIKRNOCF (Routine,ROUT) could not be collected for object 053IXVX0
2.Object '45EX1L0TIWA4LUWZHUIKRNOCF' (ROUT) of type 'Routine' is not available in version 'D
3.Object 45EX3Q1RNVZ0DVY20BZPLCSU7 (Routine,ROUT) could not be collected for object 0I930KDE
4.Object '45EX3Q1RNVZ0DVY20BZPLCSU7' (ROUT) of type 'Routine' is not available in version 'D
5.Source system EBPCLNT200: No authorization for remote activation of DataSources
Please help me out with it...
and points will be assigned...:)
Thanks in advance,
Regards,
Manjari.

Hi
Please activate all your required data sources in the source system..then replicate them in bw..Then try again...
It's an option only...may works some times...
Thanks,
Teja

Installation of Business content and activation

Hello,
Our Source system is ECC 6.0 and
BW :NW2004 S and SAP NetWeaver BI 7.0 .
We are able to create source system conection successfully . after installing the business content and replication, all the data souces in BW are still in Version D only. Do i need to select each DS individually to activate ? or am i missing any steps ?
Any help is highly appreciated ?
Regards

Hi,
I was also passed this latest information from my colleagues in Product Management.
The method I explained is the old method for activating DataSources and extractors. It is still valid in SAP NetWeaver 2004s but there is a new, and easier, methid to do this now.
Also if you have followed my instructions, there is an additional change in the replication process and a decision you must make:
"Once the customer has activated the DataSource via rsa5 in source system, then he/she needs to replicate this datasource to BI. During the replication, he/she is asked via pop-up whether he would like to replicate these datasources as 3.X DataSource or 7.0.x DataSource.
If he decides to replicate these datasources as 7.0.x DataSources, then the A version of this datasource will be seen in table RSDS, instead of the original table RSOLTPSOURCE.
So if the customer checked table RSOLTPSOURCE, then he/she only see the D version.
This could be the reason that customer still only see D version after the datasource replication."
The new method is:
"- If you have a 3.X datasource, during the source system connection, the D
version of DataSource is already replicated into BI.
- With transaction RSOR in BI, you need to select the related transfer rule, and via transfer rule you are able to collect the 3.X DataSource.
- Then you need to push 'install' button to activate this datasource.
- After activation, the A version of DataSource will be available in BI and in Source system.
- If you have a 7.0.x DataSource, the steps are the same like 3.X datasource. But via transaction RSOR you are able to directly select this datasource (object type RSDS).
So with BI capabilities of NetWeaver2004s technology, it's no longer nessary to run rsa5 in the source system to activate the datasource."
I hope this helps,
Mike.

How do i redo the changes occured due to installation of business content

I have installed some business content and this has effected about 80 existing Infoobjects and brought them to 'revised' version. This might have also effected other objects like transfer rules, update rules...... But now I want to retain the IObjects to previously 'active' version. Implying i want to do away with my action. I even donot remember what i have tried to instal...may be a datasource or something else. I have chosen the option 'before and after data flow', this i remember. We are presently using NW2004s. How and where do identify what i have tried to install and how do reverse my action.

Dear Raj,
Sorry to know this.. I do not think we can reverse the activation here.. (let us wait for other replies..)
Meanwhile,
You may want to check with basis for the backup of Yesterday so that they can retrieve the data.. It has to be a fast action as if they decided to restore from backup version.. may be you will not loose todays development work..
are the objects get transported?
try collecting again in the same maner and try to prepare in the excel sheet for the objects.. may be the previous LOG also can guide you some starting point..to help u .. ( not very sure..)
I see little painful work for tomorrow..
all the best!
regards,
Hari
Message was edited by: Hari Kiran Y

Problems in installation of Business Content...

We have just installed BI 7.0.
And for checking I tried to install a simple Query:Number of trips....
In grouping I had selected IN DATAFLOW BEFORE AND AFTERWARDS...
Still in STIMULATTE INSTALLATION I am getting errors like:
InfoObjects for InfoCube 0FITV_C01 not available in active version(error message concised as coming for all InfoObjects of the InfoCube)
Data source 0COMP_CODE_ATTR_TEXT not maintained
More errors concerning the InfoCube 0FITV_C01 coming. But infocube 0FITV_C01 is in collected items.
Can anyone please guide how to solve this.
Thanks and Regards,
Sudipto.

Hi Anil,
Thanks for your help.
I tried to install but errors are coming for Update rules...
Actually it is stating:
Data source 0HR_PA_OS_1 not maintained
This it is stating for other data Sources also...
I have successfully activated the Datasources in BI and then activated the same.
Can anyone guide me what more needs to be done to the Datasources to eliminate the error...
Regards,
Sudipto.

Error InfoObject inactive while activation of Business content for cube

I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye

Translate Business Content BI (BW Objects)

Hi Experts,
I install Business Content for Purchasing Analysis (Info Cube, Info source, transformation and query)
And after thatu2019s I create two custom cube with transformation data flow of business content all work fine, But my customer want the see BW objects in BEX Analyzer and in WEB BEX in FRENSH!!!
I find tow solution for my issue:
1- Translating BI Objects see article below :
      [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4075f740-5aa4-2c10-53bc-b1159122e475]
2- Re-Installing Business Content in French
           a)   Connect to my SAP BW with language =FR
            b)   Re-Install Business content in French
The solution 1) is very long for translate 5 Info Cube, in solution 2) I donu2019t know the impact of this re-installation of business Content for my actual system?
Please can some suggest me a best solution for translating my system ?
Thanks & Best regards

Hello Pattnayak,
Thank you for your reply, the solution in the link is the same like :
link: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/4075f740-5aa4-2c10-53bc-b1159122e475]
My question whatu2019s the best solution:
1-     Translating BI Objects see article below :
OR
2- Re-Installing Business Content in French.
Thanls & best regards
ILYAEBI

Reg. business content

hi
greetings.
sahall anybody explain step by step of installing the business content.
thanks
regards
sridhar
[email protected]

Hi Sridhar,
In the main menu of the SAP Business Information Warehouse select BW Administration ->Administrator Workbench.
Select the Business Content function area using the corresponding pushbutton in the left-hand navigation window or by Jump -> Install Business Content
With the pushbutton Navigation Window On/Off on the application toolbar in the Administrator Workbench, you can show or hide the left-hand navigation window. We assume that the navigation window remains hidden in the following section.
If you want to assign source systems, select Assignment Source System. The Select Source System as Default dialog window appears.
Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
The assignment of source systems is only relevant for transfer rules, file DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.
If you do not select a source system, all source systems are automatically assigned.
You can subsequently change the selection you made using Source System Assignment .
Change the required settings in the following selection list:
Grouping
Choose the objects that you want the system to consider. The groupings summarize all the objects of an area.
Grouping
Information
Only necessary objects (standard setting)
Only those objects that are really necessary for the action, that is, the transport of the selected objects, are taken into account (minimal selection).
In data flow before
All objects are collected that submit data to a collected object.
In data flow after
All objects are collected that obtain data from a collected object.
In data flow before and after
All objects are collected that both submit and collect data.
If you change the default setting ( only necessary objects), the new setting will be used as a standard for the user.
Collection Mode
Select how you want to collect the objects:
Collection Mode
Information
automatic collection (standard setting).
The data is collected directly when the objects are selected.
Start manual collection
The data is only collected when you select Collect dependent objects.
Select an Object Type you want to transfer.
You have various selection options in the navigation window in the Business Content function area of the Administrator Workbench.
When you select an object type, the arrangement and selection of the existing objects are displayed in the tree structure of the central screen area as below:
Object Type in the Administrator Workbench Navigation Window.
Display objects in the tree structure in the central screen area.
Data targets by InfoAreas
List of InfoCubes and ODS objects by InfoAreas.
InfoObjects by application components.
List of objects by InfoObject catalog and by InfoAreas
InfoSources by application components.
List of InfoSources for master data and transaction data.
Roles
List of the standard and branch roles.
Object Types
List of objects by type (InfoArea, application, InfoObject catalog, role, workbook, query element, InfoSet query, Crystal Reports template, Web template, Web item, saved query view, MultiProvider, InfoCube, InfoObject, InfoSet, Classic InfoSet, ODS object, update rules, InfoSource transaction data, transfer rules, source system, InfoPackage group, InfoPackage, process chain, Reporting Agent, report/report interface, currency conversion type
Objects in BW Patch
List of installed BW patches including list of objects newly delivered or re-delivered with the respective patch.
Package
List of packages in which there are SAP objects.
Select the object(s) you want to transfer in the central screen area and transfer them into the right-hand Collected Objects screen area by drag and drop.
Using Search for Object, you can also search for objects by a string (for example, 0CUST) or by pattern (for example, 0CUST_*B).
You can display a value help for every object type: By double clicking on Select Objects in the tree structure of the corresponding object type, the screen Value Help for Metadata appears. Select the required objects. Choose Transfer selections.
You can only use Business Content DataSources of a source system for transferring data in BW, when you have transferred these in their active forms and then copied them into the BW system.
The system displays the selected object(s) and all dependent objects in the Collected Objects screen area. To reduce the time taken to access the objects when wanting to use them again, the collected objects are stored by default in the Repository Cache.
When transferring the objects to the Collected Objects screen area, the objects are added at the same time to the tree structure of the corresponding object type in the central screen area and are saved for the respective user. This personal object list is available every time the program is restarted.
To remove objects from the personal list, select the object in question and choose Remove Object from Display via the context menu or via .
Objects that are listed in several tree structures are only displayed as changeable the first time they appear. Each time they are listed again, they are highlighted in gray and are not ready for input.
Check the following columns in the Collected Objects screen area:
The following Business Content objects are highlighted in the Transfer column by default:
Objects transferred for the first time
Objects delivered again in a new version from Business Content.
When the SAP delivery version and the active version can be compared, a check box is shown in the column Compare (X) or Copy.
There is a check mark in this checkbox by default. In this case, your version is compared with the new SAP delivery version and complimented.
If you remove the indicator then the new SAP delivery version is copied in its entirety.
Date symbol: The object is already available in an active version. However, the active version belongs to an older Content Release. We recommend that you adopt the new version
Gray Selection : There is an active version in the system, but the object status is given as inactive. The object has to be subsequently edited.
In the Active Version Available column, there are the following display options:
Indicator
Meaning
No Indicator
The object is not available in an active version.
The object is available in an active version. You can decide whether to retain this version or adopt again.
Change the required settings in the following selection list :
Transfer Type
Information
Simulate transfer
A test is made to see if errors are likely to occur during the transfer. The most important objects can be checked in the simulation. However, this does not include all dependent objects Therefore, only use the simulation as an orientation help to be able to recognize errors and remove them.
Transfer
The selected objects are transferred immediately.
Transfer in background
The selected objects are transferred in the background.
Transfer and transport
The selected objects are transferred immediately and then written to a transport request in the connection.
We recommend Transfer in the Background, because transferring a large number of objects and especially changing already active objects can take up a lot of time.
You can find out if errors have occurred during the installation of Business Content from a log, which you can request using the Log pushbutton. Repair the errors in the respective maintenance transaction. Try to transfer the Business Content again.
Hope this Helps.
Thanks
CK

Error in Business Content Installation

Hi Guru's,
I am trying to install the Business Content object InfoCube 0FIAA_C04 where the steps i followed are:
goto RSORBCT >Infoprovider by infoarea >find 0FIAA_C04 >grouping >In dataflow before & After >Collection Mode >Start Manual Collection > drag and drop 0FIAA_C04.
After this i am getting list of error message at the bottom in RED as follows:
Object 0ASSET_ATTR_TEXT (3.x InfoSource,ISTD) could not be collected for object FI-AA-IO (Application,APCO)
Object '0ASSET_ATTR_TEXT' (ISTD) of type '3.x InfoSource' is not available in version 'D'
and so on for other objects also related to 3.x
please throw some light as to how we need to install 0FIAA_C04 without any errors and collect the objects related to 3.x infosource also.
if you have any document on this pls forward it to skd1982 gmail
Thanks,
Sujeet

Hai i assume your in BI 7 try to collect the cube independently i mean only necessary objects for cube and then try to install also see to that all infoobjects in cube are installed if missing collect those independently and move.
Then install datasource with dataflow before .when collecting see those objects which are necessary and then tick it installation ..
Goodluck.

Business Content Installation

Hello to all,
I have a problem while installing Business content.
As per SAP Documentation...I selected the Cube and selected Before and After grouping option. Ex: 0CSAL_C01.
I checked the dependent objects under Info Objects for 0CSAL_C01. For some of the objects it's selected MATCH (to prevent overwrite and this is set as default).
Then I installed in back ground mode option.
Once the installation is done the 0COSTCENTER is overwritten (even if I selected Match option and it de-selected Install).
Can any one please explain me why this is happened? Any documentation on it?
Does background mode not recommended? Does it always overwrite???
Thanks

Hi,
I have found this statement at
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
SAP recommends you use the Install in Background option, because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time. Make sure that when you install objects in the background, the versions are not matched; the delivery version is always installed. They are not matched against any available customer versions.
Does it mean that even if I select match, will it overwrite?
Thanks

Business content 3.30: Datasources not available for installation

Hello,
we have recently upgraded our business content from 3.10 to 3.30 in order to get new business content (e.g. datasource 2LIS_13_VDKON - billing item pricing conditions).
Although the upgrade was successful, the new datasources cannot be found in the Administration Workbench/ Business Content in order to install them.
Is there something more we should be doing after the upgrade, in order to be able to see the new Business content as available for installation?
Thanks in advance,
Pavlos

Palvos,
You can not find the datasources in Admin workbench. Datasources can be found in R/3.
Login to your R/3 system. Go to RSA5. Expand all. Search for your datasource. Click on "Transfer Datasources" icon on tha tab. This installs your datasources on R/3 system.
Once the installation is complete, login to BW, go to RSA1, "Source Systems" tab, select your source system and 'replicate datasource' by right clicking on it.
You can install corresponding Infosource from "business content" tab in BW.
Hope it solves your problem
Gova

Business content installation query

Hi Experts ,
i am installing PM Business content installation , while installing 0PM_C03 there is an infoobject 0EQUIPMENT which is existing in present system but of old version   and mst of the attributes are time independent
now i want to install   business content in such away that current 0EQUIPMENT should not be disturbed and business content version has attributes that are time dependant
Question is shall i install 0EQUIPMENT or not, and let the old version remain , as 0EQUIPMENT is under use at few places
secondly if i dont install in future will there be any problem in loading PM data .
Please Advise,
Thanks in Advance,
Nitya

HI,
hi,
use the option Match (X) or copy.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if:
¡        The match indicator is not set, and
¡        The install indicator is set.
In other words, the delivery version is copied to the active version.
Note
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
For more info search in forums or check the sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
KP

IN BI 7.0 INSTALLATION OF BUSINESS CONTENT

Similar Messages

Maybe you are looking for