In CS3 can I export my audio and save it to a CD?

Does anyone have experience exporting audio only to some file format and burning to CD?
Is it as simple as exporting AUDIO only as wav and burning the wave file thru WMP?
Message was edited by: Wes Cox

Yes. Export as Export Audio only. Check that Multiplexing is set to "None," which should be the default with the Export Audio ONLY checked. Then choose PCM WAV 48KHz 16-bit. This will create a WAV file, where you tell PrPro to locate it. This will be file that can be burned to a CD as data. If you want the full CD-Audio (CDA), Audition, Soundbooth, or the free, Audacity, can convert this to the CDA format, at 44.1KHz (CDA standard), and can burn to a CD-Audio. Do not know about Soundbooth, or Audacity, but Audition can even structure your CD-Audio with tracks, if you have more than one file.
Good luck,
Hunt

Similar Messages

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Can you export the audio into a SINGLE file?

I know I can export the individual slide audio, but can I
export the audio for all the slides into one audio file? How?
Thanks!

Hi benhenny
Sure can! Check the following link.
Click Here
Cheers... Rick

Export to Excel and Save as Static File

Hello all,
When I export to excel from SharePoint 2013, and save the file, the data remains dynamic in that if I update the list in SharePoint it will update the data in Excel. This is great and I use it in a few places, but I also need to capture a point in time and
save the exported Excel file as static data (i.e. Export to Excel, and Save as the Q3 Report). How can I save the file as static/remove the dynamic link so I just have the data at the time of export?
Thanks!
K.
Personal Blog: http://thebitsthatbyte.com

Hi Kelly,
According to your description, my understanding is that you want to export to excel as a static file.
In SharePoint, when you export list to excel, it works as a one-way sync. It can sync data from SharePoint to Excel. If you don’t want to sync the data from SharePoint, you can copy the data from the exported excel file to a new excel, then save the new
excel file.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

When I export my photos and save them as a jpeg. Am I still losing information?

When I export my photos and save them as a jpeg. Am I still losing information? Would I be better of saving them as a TIFF or a PSD? Also I know DNG is a digital negative, would that be the better format to save all my stuff?

I apologize if you already thoroughly know all this (I couldn't be sure):
When you export, you don't change the original (i.e. you never overwrite the original). So, you can export a million times and never lose quality (of the original), regardless of the export formats you choose.
Of course the quality of the export depends on the chosen format, and if the format is lossy (e.g. jpeg), then export quality also depends on the size & quality settings.
TIFF is lossless, so quality is essentially equivalent to the raw in Lightroom. It's the preferred format if a really BIG file is OK. Jpeg was invented to reduce file-size as much as possible without being too much inferior, quality-wise - and it does that very well.
DNG is good for some stuff, but don't export your photos in DNG format unless you know what you are doing and why... Lot's of people like converting their originals to DNG format, but that's a whole different kettle of fish...
Note, it may very well make sense to export a jpeg as tiff, since exporting a jpeg as jpeg is not as good. - reminder: when you export, you are not overwriting the original, you are making a new copy from the original, by combining it with develop edits if there have been any.
Rob

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

I downloaded alot of music on my iphone. Then i had to opdate it and i lost it all. Is there anyway I can get my musik back and save it at my computer so this does not happen again. Its terrible. :(

Please Help Me !!
I downloaded alot of music on my iphone. Then i had to opdate it and i lost it all. Is there anyway I can get my musik back and save it at my computer so this does not happen again. Its terrible.

See Recover your iTunes library from your iPod or iOS device.
tt2

I have iphone 3gs ios 6.1.3 .. I have a problem I can not look contact profile and save it. I already sync with outlook and windows books also can not be seen. I tried to add a contact on the contact menu, but the result like restart ... (but not restart

I have iphone 3gs ios 6.1.3 .. I have a problem I can not look contact profile and save it. I already sync with outlook and windows books also can not be seen. I tried to add a contact on the contact menu, but the result like restart ... (but not restart the device, not just stored). I am confused about this issue ... please help ..
thank you in advance.

Your suggestion worked perfectly. I can't believe there is nothing in any of the instructions I have seen online at the Yahoo and Apple help sites about the making sure the right default account is checked. I don't think I was even aware there was a "default account" setting. Thank you so much.

How can I export an audio track

I have made an audio track with three songs in GB and now I want to export it and use it as a track for a Keynote slideshow.
How can I export it as AAC or similar?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

Can't export MP3 audio from Premiere Elements 9

I want to export the audio from my movie. The File, Export option appears to be unavailable, regardless of what I do; I saw elsewhere on the forum that all exporting is now done through the Share tab, and referring to PE8, the post recommended the "share to computer" tab. Under advanced options, I set the audio to be exported as an MP3, with no video. However, the "advanced" button leads to a screen with 3 tabs: "Format," "Video," and "Audio." I can make those changes under the "Audio" tab with no problem, and because I have chosen to export only the audio, there is no information under the "video" tab. The problem is that the "Format" tab only gives me two options, ".flv" and ".fl4" or something like that, and the resulting file appears to be a 7 second long, blank and silent video, played by Windows Live Movie Maker. How can I get my audio exported?

Are you using version 8 or version 9? It's hard to tell because you reference both.
In version 9, if you go to the Share tab and select the Computer option, you'll be taken to a screen with seven output options.
Audio wil be listed as your last option. (You do have to click on the Audio listing to select it.) and MP3s are certainly among the options listed on the Preset menu.
If you can't see it, you need to scroll down or resize your panels -- or your computer monitor may not be large enough. But it's there.

When exporting separate audio and video streams, the audio drifts out of sync

So this is my first slightly larger project in Final Cut Pro X.
When I export my finished project (around 12 minutes long) straight to quicktime, it plays back perfectly.
When I export using compressor, the resulting audio and video streams are two different lengths. The audio comes out a full second longer. If you try to lay them down in a program like Adobe Encore, the audio starts out perfectly in sync. Two minutes in you notice the video is slightly out of sync with the audio. By the end of the video it's comically bad, over a second out of sync.
What's even more vexing is if I try to take the quicktime file that IS in sync upon playback, and try to convert it burn that to a dvd or blu-ray using toast, the problem re-emerges.
I triec searching around, but most of the suggestions that came up were vauge, like, "Upgrade to a real program like Final Cut." (This was in reply to people who were using free software programs.)
I did see one idea surface where 44 and 48 kHz sampling rates don't play well together. So I combed through my project and found all the 44.1 songs that were used, and swapped them out with upsampled versions. Nothing changed. It didn't sound like it would fix it, as people usually said it was a specific amount of frames off, not something drifting out of sync.
So the question is, does anyone have any suggestions on what could be causing this? Thanks! :-)

Project settings can be accessed and changed by selecting the project and pressing command-J. Then, in the inspector, click on the little gear in the lower-right hand corner to access the settings.
Why are you trying to output video/audio separately? If the content plays in-sync when exporting a quicktime movie (using current project settings), you could try separating the video/audio using MPEG Streamclip as a second step instead of using compressor. For audio, don't change the sample rate from the project settings, and use uncompressed audio (AIFF) as the output format.

CS 5.5 - Can I export Discrete Audio Channels w/ MXF OP1a

I created a new Sequence as 16 channel audio, each as mono. I've populated 8 channels.
I export an MXF 0P1a.
I brought the MXF back in and cut it to a new sequence to test the audio export. And on the new sequence the mix tool is only showing audio on the first 2 channels, even though the file imported with 8 channels. So it seems like PPro mixed the channels down.
Can I export an MXF with 8 discrete audio channels?

I have checked it and it doesn't work 6.0.3. I have proper 8 chanel audio on sequence and audio master shows this cannels properly. After exportin i have only 2 channels.
Please report how to do it properly.
regards

How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

How can I combine the audio and video files from youtube downloads when they don't automatically combine?

I'm using YouTube Video and Audio Downloader. Sometimes the audio and video files combine automatically, sometimes they don't - remaining as separate " DASH - .m4a and DASH - .mp4 ". It used to be that when this would happen I could open up a "ffmpeg" window which would allow me to "manually" convert them to a combined .mp4 file. It was a "drag and drop" type of interface. For some reason I can no longer access that ffmpeg combining function. I tried clicking on ffmpeg.exe. I tried re-downloading ffmpeg several times, both from the Downloader options tab and from the ffmpeg website.
Thanks for your help.

Sounds like a question for the developer of the video download add-ons that you have installed.

In CS3 can I export my audio and save it to a CD?

Similar Messages

Maybe you are looking for