In FBL1N system not showing W/tax exempt amount.

Hi,
In FBL1N system not showing W/tax exempt amount.
Regards,
Nilesh Surve.

Hi,
we are doing implementation for country India.
I have checked report out-put & it is not giving correct figures. Also our client require with holding exempt amount in vendor ledger so that they can immediately extract vendor report with TDS details.
Regards,
Nilesh Surve.

Similar Messages

I am not included for tax exempt for iOS developer program

Hi,
I am not included for tax exempt . but checked the tax exempt check box unknowingly during ios developer enrollment process of 99$.and completed the purchase .
Now can I apply for excluding tax exepmt by unchecking .As I cant provide the SSN for app sale..Can some one help me on this.
Thank you

This is being caused by using the same Apple ID for iMessage. To fix this you have two choices:
On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

In vendor line item not showing withholding tax amount and withholding base

Hi Gurus,
When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
Thanks & regards,
Dharma.

Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
this would give us some help or hopefully the answer..
regards

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

Business systems not showing in I.D( Integration Directory)

Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.B

Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar

One system not showing up in Qadministrator

I have my macbook pro setup as the controller
2 mac pro towers both setup as service only nodes
1 G5 as service only node
Everything was running smoothly for months.
Suddenly I can't see the G5 in the Qadministrator. It's just not on the list. Poof
The G5 is definitely still on the network. -When I access the Qadministrator from the G5, I see the other systems, but still no G5.
No settings have changed. I've tried turning it's sharing off then back on. -No help
Any ideas?
I've also lost some of my instances on 1 of the towers. Just 1 processor shows up as accessible. They're all there, but only one is active for me to grab.
Thanks

Any System OS updates lately? Are you auto updating the Macs? (this could be a big issue)
Did you check the firewall settings on the mac that is not showing up? Sometimes updates will dump custom security Settings.
Sounds to me like an update could have pushed a setting that is preventing it from appearing, and not allowing you to optimize your CPU usage.
My Two cents.

Service Tax Credit Avilable is not showing in Tax Payment Wizard .

Hi Experts
I am working on SAP B1 2007B PL 08. I made some entry of service tax in AP invoice and AR Invoice. I also made outgoing and incoming payment for these invoices. But in Tax Payment Wizard Service Tax Credit is not showing however with the same tax code in AR invoice Service Tax Payable is showing. I check all the master setting with OEC database. There is no difference between them. Tax code Type is Service Tax and Input and output Tax Account are properly maped. Anybody can tell me what can be reason.
Thanks.
Regards
Gorge
Edited by: Paul Finneran on Oct 15, 2009 12:36 PM

Dear Gorge, How do you arrived at the result? plz can u say me?
Thanks,
Shiva.

ESB Services nor Default System not showing up in ESB console

We are running SOA Suite 10.1.3.1 and the services within the ESB console are not showing up immediately after logging into the console. I have verified that the credentials
within the esb_paramater table are correct. We have also increased the amount of max cursors on the DB. Is there something else
that we can try to get those services up and running?
Edited by: user5529739 on Jun 11, 2009 9:50 AM

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

G570 burning smell... system not showing any signs of life

Hi guys my G570 just started making some burning smell and then suddenly turned off....... all I see right now is a low glowing caps lock and power but no system power up
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

hi Abdul_Ahad,
Im sorry to hear what happened,
I suggest you call Lenovo Technical Support for assistance, the system needs a thorough check before replacing some parts,
http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613
I think the computer can't effectively cool it self down, causing the issue.
Best regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Adobe form not showing negative sign before amount

Hi Experts,
We are having a strange problem. Our developers displaying
negative
amount in my adobe output. Its working fine in our development
system.
But for the similar set of data in testing system, negative sign before
the amount is not coming. The same adobe form, layout and print
program
is there in both development and test environment systems. Please
help.
Thanks,
Sunny

Hi Sunny ,
Check with the development team .. The field attribute while display types which you can restrict in the adobe form layout settings.
I am pretty sure this will help you and revert back if you have any questions in this regard.
Thanks ,
Gowrisankar

Tax Condition ZSRT not showing in Print Preview and Tax Register

Dear Friends
while we making Purchase Order the Tax condition not showing while print preview. also not showing in Tax Register.
Tax Register we developed.
any hops
Rajesh G

Dear,
ZSRT is a customised condition which you have created. So to bring that condition in print preview you have to talk to your ABAPER , so that he can incorporate this condition type to his customised print preview program. If your tax register is also customised then again you have to communicate to the ABAPER.

Excise and ***. Valsue doen not show when Creating a Sales Order

Hi SAP Gurus,
I am creating a Return Sales order through VA01 with reference of Billing Document which was earlier giving error of 'Copying from sales document type ZSFG to ZREV is not supported' that was resolved by going through the available threads support. I have done it through VTAF.
Now system copying the records and showing the material and qty but when we doube click an item and then go in Condition tab it is not showing Assesable Value, Excise amount and CST where as it was showing Freight Amount.
Please advise what wrong we are doing.
Rajesh Gupta

Check the pricing analysis in condtions tab what it says ?
If only taxes are not copied then check the UTXJ Condition records , if it exits then go to VK12 check the validity periods of the same.
Hope it helps u
Regards,
Ramesh

Stock not showing properly in for Batch determination

Dear Gurus,
While doing the following msg appearing since JAN 01, 2008, IN BATCH DETERMINATION THE SYSTEM NOT SHOWING EXACT QUANTITY AS IN ACTUAL STOCK
Pls help for this issue,
Regards,
Atul

Dear Jagdish,
In MMBE in unrestricted use column there is total 16.979 stock position is there and again for posting ( PGI ) after delivery for selecting batch determination Available Qty is showing 9,999,999,999.000
How I will correct it could not understand.
Regards,
Atul

VC - new characteristic does not show in PS BOM explosion / CU50

Hello World,
we added a new Characteristic to a class that is basis for a Material BOM explosion. In transaction CU50, the new characteristic can be configured by selecting its single values and the result shows up correctly in the BOM explosion.
Unfortunately, it is does not show up in the BOM explosion result of the SAP PS module @ Network Activity where the explosion is done concerning to our biz process. All other characteristics explode properly in the PS BOM explosion. I have no clue about the difference of the newly added characteristic is that makes it behave differently (only) in the PS system, not showing up in the result.
In CU50 @ Menu Extras @ Result I found a trace of the difference, but cannot interpret it due to a lack of documentation of the resulting screen that is entitled "Configuration : Result". Here, in table "Detail List", only the faulty new characteristics show additional extra Dependency entries with a light green background that cannot be found with all other characteristics in the same table. These extra entries can be drilled down by double-click and produce a pop-up window that shows some status information and the dependencies source code.
Question: what do the extra entries of dependencies say, why are they shown and why not at other characteristics?
By understanding this difference I hope to find the reason why these characteristics are not exploded in the PS module (which is my primary question).
Thank you for a helpful answer!
Marcus

Hi Jong - Moon cho,
Please check following setting,
1.Consider setting the Individual/Collective indicator to 2. (MRP 4 view)
2.In order to get dependent requirements from the planning of configurable materials, components should not be configured with strategy group 70 or 59.
Also refer the bellow link
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
Regards
Girish

In J2I9 , cenvat not showing in the Abstract for capital Goods

Hi
In the T-code J2I9, System not showing the BED values in Abstract report for Capital goods.
Edcess and HScess are displayed.
excise invoice,RG23 part no. is generated & also values were available in table J_1Ipart2
please reply

Hi
The BED capital Goods is posted and it is there in the Table also,Ecess and Hsces are displayed .
In the Annexure option of the J2I9, the BED amount along with Ecess and HScess are displayed,
but when we select the Abstract option of J2I9, The BED amount is not displayed,only other two
Ecess and HScess are displayed.
please reply

In FBL1N system not showing W/tax exempt amount.

Similar Messages

Maybe you are looking for