In Numbers '09, version 2.3 (554), how to I get spreadsheet gridlines to print out? I have a Macbook Pro and use OSX 10.9.4 Mavericks.
In Numbers '09, version 2.3 (554), how to I get spreadsheet gridlines to print out? I have a Macbook Pro and use OSX 10.9.4 Mavericks.
HP,
In Numbers '09, the only lines that print are Cell Borders. Apply borders and test by Printing to PDF.
Jerry
Similar Messages
-
I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks
Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots. -
How can I get the old view of iCal back on my MacBook Pro and iPhone?
How can I get the old view of iCal back on my MacBook Pro and iPhone? The Mavrick version is crisp and clean but a colored dot is not the same as a highlighted word. I rely on my iCal on my MacBook Pro and iPhone 5 to help me track which of the 8 sites I visit for my job during the week - the color coding is (was key) to organizing and tracking meetings. I hate the upgrade!
If purchased through the Mac App Store then it can be installed on up to five authorized CPUs. Otherwise, it's controlled by the license that came with the software.
To install on another computer copy the downloaded installer application to the other computer. -
I have a macbook pro and using photoshop elements 12. I dont have a problem before but since i upgraded my mac to an new version IOS Yosemite, then begun the problem. It always sotock or freeze. What should i do?
properly uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
i have a macbook pro and have installed the latest version of numbers but can't open or create a new document
Melting,
Can you share any information regarding what you have tried? To create a new document select the menu item "File > New..."
What documents have you tried to open and what happened when you tried? -
I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??
Oh, you do have the C2D! That's great!
I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.
Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
Well, that's about it..
I hope that something I've mentioned can help you achieve your overall goal.
Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
Best Regards,
mm~ -
Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.
Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
(A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
(B) I have checked my firmware versions and they are all up to date, as per Apple's information.
(C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
(D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
(E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
(E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
(E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
(E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed -
i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?
If the purchases are all from the same account then you can share the content by authorizing each device.
If you have separate accounts then you have to be authorized to use the content purchased from another account.
MJ -
I have a macbook pro, and the hard disc recently crashed. I lost everthing, but luckily i have my music saved on my ipod nano. How can I now transfer my music from my nano to my mac for free?
Hi there ovadia!
You can transfer the music purchased by your iTunes account from your iPod nano to your MacBook Pro by following the steps outlined in this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Thanks for using the Apple Support Communities!
Cheers,
Braden -
How do I get my apple tv icon to show on my macbook pro. I'm running mavercik
how do I get my apple tv icon to show on my macbook pro. I'm running maverick.
Thanks for the link Diesel. Not quite there yet. Software is all up to date to 6.0.2. Your link suggests I should have second or third gen apple tv. Not sure what generation Apple TV I have. Don't believe its a really early model. I have model MC572LL/A. But it has the latest update, so I would think it would connect. Still no apple tv icon on my macbook pro.
-
I have a macbook pro and I connected a new iphone to my computer. Somehow all my pictures in the iphoto app deleted. How can I get them back, and no I do not have my TimeMachine On. Please help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
I have a MacBook Pro and I need to be able to access Internet Explorer in order to login to my remote work server (Microsoft server) and Online Business Banking system (Bank of America Cash Pro). How do I do it if Internet Explorer is not supported on Macs? Is there another option? Please help.
I also feel like such a moron as I am really new to Apple computers and don't even know what operating system I am using. The below is what I have. Sorry to all that are well beyond me in the Mac world. Have been a windows user for my whole life and haven't quite figured out where to find everything I need on my new laptop yet. Thanks!
With the following configuration:
PROCESSOR 065-0154 2.7GHz Dual-core Intel Core i7
MEMORY 065-0156 8GB 1333MHz DDR3 SDRAM - 2x4GB
HARD DRIVE 065-0159 750GB Serial ATA Drive @ 5400
OPTICAL DRIVE 065-0161 8x Double-Layer SuperDrive
DVI Adapter 065-0162 None
VGA Adapter 065-0164 None
REMOTE 065-0166 None
Apple Software - iWork 065-7672 No iWork preinstalled
Apple Software - Final Cut Exp 065-7682 Final Cut Express preinstalled
Apple Software - Aperture 065-0338 Aperture preinstalled
Apple Software - Logic Express 065-7675 No Logic Express Preinstalled
Apple Software - Filemaker 065-8307 No FileMaker Preinstalled
Apple Software - MS Office 065-0278 MSO-HOME & BUSINESS EDITION
KEYBOARD AND DOCUMENTATION 065-0172 Keyboard/Users Guide
COUNTRY KIT 065-0175 Country KitIf you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers, -
I have a macbook pro and a photosmart D110 printer. I was told that if I load the software for the printer onto my mac that it will no longer print wierlessly. Is that true and how can I scan wirelessly without loading the software? Also, can I just connect my mac to the printer with a cable and scan or do I need that software loaded onto the mac? Thanks for all help!
If you are running Lion then all drivers are distributed through Software Update. You do not need to install anything, other than to install the printer in System Preferences > Print & Scan. If you already added the printer while it was connected using USB, you might want to delete it and set it up again wirelessly to avoid confusion. Or, give them two distinct names e.g. "Photosmart D110 (USB)" and "Photosmart D110 (wireless)".
All scanning functions are now performed using Preview, but you can also access the scanner through the same Print & Scan preference pane, or with Image Capture.
This HP document may help explain how driver software is distributed now:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03079365&cc=us&dlc=en&lc=en &product=4144493&tmp_track_link=ot_search#N108 -
I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.
-
I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 on both machines. I am the only user of this software.
You can install and activate CS6 on both machines perfectly legally.
Maybe you are looking for
-
Unable to perform database compare
Recently, not since three or four days, we have been facing an issue when trying to compare within visual studio 2013 on a database project. The compare screen loads up but I'm not able to select source or target. Nothing happens if I click the targe
-
MacBook Pro not working, and I'm in China
Hello everyone, I am posting on here because there is no way to email customer support and I am currently lacking the ability to make phone calls. Sorry, but I'm about to get a little personal here (note: I added this little note in later after I rea
-
I have done my certification in SAP FI, a few months ago. But everywhere I go for an interview, I saw that they require FICO consultant. I know, CO was part of this complete module. But now, its separate. So, I wanted to ask whether I have to do CO t
-
The possibility to hide for displaying a user status in work order
Hello gurus, I have following issue: It is possible to hide only for displaying a user status in a work order when it's active? br, Laurentiu
-
Solution to correcting strobing AVCHD captured in FCP 2 as movie file?
Hello, We were given a Sony AVCHD camera by a client to capture rushes needed for a documentary. We were only given a component cable to digitize, which we used. Now we have quicktime rushes, which strobe on playback when there is movement. I know Vo