In PI Sheet ,no Coproducts will be shown

Hello Specialists,
In my current project, the customer want to use co.products, which work fine from the controlling point of view, but in Process management, we are using HTML based PI Sheets. The PI Sheets are not showing the Materials, marked as Co product. I´m using the message type PI_Cons, but I assume that this type might be the wrong one.
Hope you can help.
Regards. Alex

PI_CONS will only show you the list of materials that are to be consumed against a Process Order, but the Co-Products will be an output with the main output.
So the Co-Products are not displayed in the above message.
If you want to post a goods receipt for the header material of the order or for a co-product, you need to send a message of category PI_PROD to destination PI03.

Similar Messages

"Only files in Apple Loops format will be shown in the loop browser".

I recorded a Drum loop from my Korg m50 workstation into logic pro 9.
After recording i tried to import that loop into Apples loop library. After doing so i get this message.."Only files in Apple Loops format will be shown in the loop browser."
What do i do?
Please help.
Thanks
Rohan

I've recently gotten this error when I try to drag an audio file into the loops library (to create an apple loop.)
Comes along with Result Code=-43.
I'm trying to quantize some rhythmic loops using flex, then turn them into apple loops for the library.
My process:
Take original audio.
Flex it using slice mode.
Bounce in place.
Drag new region into Loops browser.
Errors ensue.

If I want to download an app for me in the App Store, will be shown on the screen: "Error 1004 - Please try again later.''

If I want to download an app for me in the App Store, will be shown on the screen: ´´Error 1004 - Please try again later.´´

From the article cited at the end of my post:
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694

In the finder window, column view, I double click on icon, eg. a spread sheet, and document will not open since I updated to OSXv10.8.2. Help anyone?

In the finder window, column view, I double click on icon, eg. a spread sheet, and document will not open since I updated to OSXv10.8.2. Help anyone?

Hi Ron,
Highlight one in the Finder & do as Get Info on it, what does open With say to use?
What did you update 10.8.2 from exactly? 10.6.8 maybe?

Do images imported to Keynote retain their previous color profile? In other words, if the Keynote presentation will be shown using an sRGB profile projector, should the images be converted to sRGB prior to importing?

Do images imported to Keynote retain their previous color profile? In other words, if the Keynote presentation will be shown using an sRGB profile projector, should the images be converted to sRGB prior to importing or can they be batch adjusted in Keynote?

While I feel your comment doesn't directly address my question, why I am worrying is this.
This presentation is to a camera club. Color is important. Images shown in meetings are projected by an sRGB color profile projector. Most serious photographers us a color profile with a bigger space than sRGB (typically RGB1998). If you project an RGB1998 image on an sRGB projector the colors go to crap. More precisely they become dull and lifeless. Thus, I am trying to determine whether I need to convert the images I plan to put into my Keynote to sRGB and boost the saturation PRIOR to importing them or whether Keynote has a way to do this as part of the software.
Jerry

How do I select which pictures will be shown on transition album 1 or album 2?

Working with IMovie using still shots not video. When I insert the transition of titled "album 1" or "album 2" ect.... I would like to select which pictures are shown in than transition. Is there a way to do that?

Select the transition and a bunch of markers will appear.
Grab the marker you want to move to whatever image you want. The Canvas will display the transition with the selected images. You have to select an image that's in the project.

What are best exports settings for project that will be shown on large screen?

I'm working in AE CS6 and am preparing a two-minute video using type animations and some still cartoons and some still photography. The client will eventually show it through his computer on a large screen to a group of people. What's the best settings in the render queue to output this so it shows pristinely? I'm thinking a Quicktime movie output as Animation but I really don't know. Can anyone help? Thanks.

Animation Quicktime is NOT the way to go. This codec will only playback in real time reliably on a super computer. You need to pick a good distribution format that will stick around. PICK H.264. Read on...
If by large screen you mean a really big TV then make a standard HD 1920 X 1080 comp at 29.97 fps and render using the Adobe Meida Encoder. You can put your Animation Codec Quicktime in the AME if you like but I think there are better DI formats (Digital Intermediate). Pick h.264 as the format and pick the Vimeo or YouTube HD preset and jack the data rate up to 40 or even 50 and enable Multi Pass rendering. You will have a file that will playback smoothly on any modern system, even from a newer iPad or other tablet.
If you mean a 4K display then use the same technique but create your 4K composition using the standard 4K display size of 3640 X 2160 and use the YouTube 4K preset.
You can jack up the data rate for that preset also but don't go above 50.
This will give you a file that is technically as good or better than you would get with a fiber connection to a 4K broadcast. How the project looks when played back will depend on how good you are at choosing the right techniques for your animation and color grading taking into account the color space you're working in, the gamut of the display, and the motion of animated elements as it relates to frame rate. (Hint: that's why I said to choose 29.97 as the frame rate because animating illustrations and text to look good on a big screen is a lot more difficult at 24 fps than it is at 29.97 and you don't need 60fps because what you gain in the elimination of judder you loose in the addition of compression artifacts when the data rate is the same.)
One last piece of advice. Obsessing about the quality of your playback format to achieve the MAXIMUM result is for the most part a huge waste of time and energy. Get the color right and tell the story well and avoid juddering animations and you'll blow the audience away even at 10 or 12 Mbps HD. 90% of all quality issues in rendered animations that I've seen are issues of design and animation technique, not issues of rendering with the wrong settings.

How can i be sure ALL of 16:9 picture will be shown

hi, i have not mastered a 16:9 DVD before and i noticed that my 1st attempt at formatting resulted in the image running off the TV screen. (i have a normal 4:3 aspect TV). i am placing 2 images consecutively in the track, which plays for 3 min. rather than a QT video.
I used "letterbox" format and in DVD Pro the images I used were 1024*576 jpeg (PAL) which i squished to 720*576 so they will show up "correctly in 16:9 format. in the previewer the pictures fill the entire width of the displayer, meaning it exceeds the "safe areas" overlays on both sides.
do i have to add black on the l & r edges of my images and retry?
the final product will be displayed on TFT 16:9 displays, so perhaps it will fill these correctly? i thought the idea of letterboxing was so it would adjust to fit a 4:3 TV screen with black bars at top & bottom... just need to be sure and would prefer to know before i burn 26 DVDs the wrong way...
any help on this would be greatly apreciated. i must master this project by tomorrow!
-frank

thx mark - i am well aware of the "safe zone" issues you mention and which are discussed elsewhere on this forum. my issue is getting an image to display fully on a TFT 16:9 monitor.
so do you happen know if TFT is the same as Plasma? the problem is i am emulating one of those airport "departure/arrival" screens where there's information right to the very edge of the display. but, since this is an emulation it isn't like the info screen which gets placed by the computer, but rather the same ol problem of getting all of the image to display. normally, what i do is work within the safe zones knowing that the excess image will be trimmed by a TV and visible on a computer. what do you think i should do in this case?
-frank

Creating Content that will be shown a 3D plasma TV

I have a client who is interested in having their content be in 3D(wearing glasses, not 3d like toy story).
I have never done this before and I have a list of questions that I was hoping people may help me with.
1. I know AE has a "3d glasses" filter and I fooled with that. But lets say I have a basic text, and I want it over a background, how do I make that so it appears 3d?
2. When I am done, can I just export a quicktime movie out and burn it in Encore as a Blue-ray or do I need something special.

Here's a whole bunch of information about stereoscopic 3D in After Effects:
http://aeportal.blogspot.com/2010/02/stereoscopic-3d-resources-for-after.html

When document that was uploaded by team member will be shown in PWA2013

Hello All
In our projectserver2013, user is uploading the project document in project site.
But There are no information or marking(Symbol) in PWA(Project Web App)
So PM or team member has some difficulty to check the document in Task.
Is there any method that user check whether the Task has document or not directly in PWA?
Have a good time
---- Yoon----

Hi Yoon,
There is much confusion about this - please see Brian's post at
http://blogs.technet.com/b/projectsupport/archive/2014/05/23/project-server-2013-links-to-issues-risks-and-documents.aspx
Ben Howard [MVP] | web |
blog |
book | P2O

BI Administrator Cockpit within SAP Portal: no data will be shown

Hi!
I have installed the BI Administrator on my Portal and configured the settings for SAP BW system.
The activation cockpit on SAP BW runs with some errors.
Unfortunately when I logging on Portal all the content of my SAP BW system under BI Administrator is empty.
How can I trace the error?
Thank you very much!
regards

HI
You can call the BI Administration Cockpit from the BI Administration 1.0 business package in SAP Enterprise Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
https://www.sdn.sap.com/irj/sdn/howtoguides
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
http://help.sap.com/saphelp_nw04s/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
BI ADMINISTRATION COCKPIT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50f95b21-7fb8-2910-0c81-f6935d4c654b
Also Check the Note 934848 - Collective note: (FAQ) BI Administration Cockpit
Hope it helps

Hi! In my Firefox when I click on rim to write my name (especially in facebook, etc.) to log me in there will be shown a little list of already wroten names for logging. I want to delete this list. Please, how could I do this?

how details?

Your above posted system details show outdated plugin(s) with known security and stability risks.
# Shockwave Flash 10.0 r22
# Java Plug-in 1.6.0_03 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/

MTO Process : Values shown in Balance sheet

Dear Experts,
One of my client using MTO process in PP. In MTO first create Sales Order. On base of Sales Order then create Production Order. After complition of Production order & at the time GRN of production Order Raw Material Cost & Production cost goes to Sales Order. GRN was a Non Valuated. No account document generated.
Query is, in MB52 FG material showed zero value. All sales order not convert to revenue. some FG material lying in FG storage location. At the time of prepare Balance sheet where we will show these FG material cost which already attach to sales order.
Pls help me to solve this problem.
Regards
Pankaj mishra

Hello
In MTO process - first creation of sales order
                             ru the MRP (md02)
                             cration of process oders ( md04)
                             convert production order
                             goods issue to cost centre against production order
                              Do the GRN of finished product
                              check the accounting views of finished product.
if you defined all the accounting views properly then system automatically valuated the materials.
Laxman

Which side will come on balance sheet this GL Accounts

hi
which side will come on balance sheet this accounts
PLA ON HOLD
CENVAT REVERSAL
help

HI
PLA on HOLD will appear in the Asset side of the Balance-Sheet
CENVAT Reversal will appear in the Liabilities side of the Balance-sheet
Regards
Sonali T
Edited by: Sonali A Tambat on Aug 21, 2009 8:47 AM

Data to excel, multi dimension data, multi sheets.

I have an application that I'm hoping can be done in Labview and I'm hoping I can explain clearly, so here it goes.
I have a test where I'm performing an FFT on six axis of vibration (X-1,Y-1,Z-1,X-2,Y-2,Z-2) at several different RPM levels of a tool.
So I would like to store the data as follows:
Each axis will be on a separate worksheet and the data will be shown as one row containing a specific RPM followed by all of the FFT readings.
The next row will contain the next RPM value followed by all of the FFT readings for that RPM value. This will be for one axis.
There will then be a new sheet for the remaining five axis.
The operator will enter the RPM value into a box, hit a button which will record and calculate an FFT (lets say 800 points or whatever). This will create the six worksheets and populate the first row.
Then the operator will increase the RPM, click some button to add another set of data, but this data will be appended to the next row (on each of the six sheets).
I'm strugging with adding a sheet, re-opening an existing file, and appending a row of data.
I've attached a picture.It shows RPMs and Frequency bins, with the data being acceration units for each frequency.
As an alternative, if Labview can do this without Excel, I'm not opposed to sending these rows of data to a graph where I can see a "waterfall".
I hope this makes sense and thanks for any ideas!
Jeff
Jeff
Attachments:
Accel.JPG ‏42 KB

Hey Jeff,
What version of LabVIEW are you using? Do you have the Report Generation Toolkit to interface with Microsoft Office? Either way, you can use the “Write to Spreadsheet File” VIs in LabVIEW to accomplish the results you desire. You need not have Microsoft Excel to use these VIs.
How far into the development of your VI are you? Have you configured the data acquisition (DAQ) steps? What NI-DAQ hardware are you using? I would begin with a DAQ example that ships with LabVIEW, then combine it with a File I/O example. To locate these examples, open LabVIEW, navigate to Help and select Find Examples.
Out of curiosity: why must the operator manually enter the RPM value? How does the operator determine this value? To further streamline your application, you may want to acquire the actual RPM value from whatever device is displaying it along with the acceleration data points.
Give the examples a shot, and if you get stuck along the way post back with your code and us forum users will try to help you out.
David G
Sales Engineer - SE Michigan & N Ohio
National Instruments

In PI Sheet ,no Coproducts will be shown

Similar Messages

Maybe you are looking for