In po my doc type,other users can't do me21n&me22n but they see in me23n

i have created my own document type in po, that document use for me only not other users but other users can see(me23n) display mode but can't do me21n & me22n with my own document type, this option is there in sapmm plez explain
thank u

HI,
For achieving this you have to restrict the authorization for other users in authorization object M_BEST_BSA.
Regards,
Bharat.

Similar Messages

  • User SAP* is active. No other users can log on.  Now What?

    After the last time I restarted the portal, I get the following message when I try to logon:
    User SAP* is active. No other users can log on
    Before the reboot, I was trying to configure LDAP. I changed the Data source from "Database Only" to "Read-Only Microsoft ADS (Deep Hierarchy) + Database". I also, tried to create a Superuser/Password.  You can logon using SAP* and see the users from LDAP.
    Any thoughts?  Also, can anyone clarify the configuration option:
    SAP* User Configuration
    Enable SAP* user (If you disable the SAP* user, enter a superuser ID and password below)
    Superuser Name   
    Superuser Password
    EP6.0

    Bill,
    You have to assign a user the super admin role.  Once the user has this role, go to the UM Configuration (System Admin--> System Config --> UM Configuration) and uncheck the Enable SAP* User option and enter in the superuser name and superuser password.  Restart the portal and users should be able to login.
    FYI.  No users can login to the portal if sap* is active.
    Regards,
    Marty

  • Two users can't login to Bonjour, but other users can

    All the Macs in my house are set to log into iChat on startup, which creates a defacto messaging network around the house. Quite handy. But now, on one particular machine (a G5 iMac iSight) two users can't seem to log into Bonjour, although on the same machine all the other users can.
    I've looked at some other posts on this site, and have checked that Address Book shows 'me' as correct for both users. The Firewall is not set to Essential Services Only, and there is no limit on the bandwidth. The Quicktime streaming setting is set to 1.5 mbps.
    In iChat, when using one of the two troublesome logins on the G5, when I click cmd-2 to bring up the Bonjour list, it says Bonjour is not enabled, and gives a click button to enable it. But clicking it does nothing - no effect whatsoever.
    When those two same users use the external Buddy List (and an AIM screen name) their iChat works fine.

    Hi Nick,
    This is what I have found out.
    It relates more to Shares shown in the Finder but may offer clues.
    I have G4 Tower that has been upgraded from Jaguar actually, to Panther, Tiger and Finally Leopard.
    Along the way I bought a MacBook Pro. (Now on Snow Leopard)
    At this Point I changed the G4's Computer name to represent it was the G4 and called the MacBook Pro "MacBook Pro" rather than my first Admin Account name (otherwise both Computer names and Short names would have been the same)
    I also changed the Leopard's My Card in the Address Book to give it a different Name in iChat.
    Somewhere during this process the G4 ended up with a Ralph-G4.local ID, a computer's name of Ralph Johns's Computer, a Address Book ID of Ralph G4 and the short name of ralphjohns
    The MacBook Pro has MacBook Pro as the Computer name and .local name and the short name is alsoralphjohns. The Address Book My Card is my full name.
    Now in discussion with a Level 4 poster who knows more about this than I do I found out that in Leopard if File Sharing is Off the Bonjour ID is still supposed to show in the Snow Leopard Shares.
    However if it is ON whether you use AFP or SMB or Both it is only supposed to appear once and mine was appearing twice.
    Changing the Computer name to something else seemed to confuse things (I could not Log on to share from Either Computer)
    Changing the name back resolved that but changed the .local ID on the G4 as well.
    (Changing the .local name back to what it was before seems to have had now effect now.)
    However the G4 now only shows once in the MacBook Pro Shares.
    I do not think the Upgrades are the distinguishing feature more my poor attempts at making sure the new (then) MacBook Pro had a different ID than the G4.
    I have been able to Bonjour Video and send files as well as see the Other Computer in the Bonjour Buddy lists.
    So in summary.
    The Address Book My Cards have to be Different.
    Sometimes changing the Computer name or the .local name does seem to cause issues in File Sharing - which may have some influence on Bonjour as a whole.
    Whilst my G4 was showing up in the MacBook Pro as two Shares it was listing the .local name and the Computer's Name as shown in Sharing which were different.
    It maybe this if it is happening for this computer that may give clues.
    7:59 PM Thursday; October 15, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Other user can't access to OBIEE 11G installed on a server

    Hello,
    We have installed OBIEE 11G on a server ( windows sever 2008 r2) with admin account, and it works fine, But others users can't access to obiee 11g ( administration icons are white in their sessions) even they have admin rights.
    Can anyone tell me what should we do??
    Thank you.

    Hi,
    This is the exact format how my tnsnames.ora file looks. sorry, I can ping it in command prompt now. In my connection pool i tried first DSN =  ab.bc.xy.zx, did not work. Then I saw oracle's default repository and changed my DSN to your suggested format starting from "DESCRPTION" to rest. Still no luck Do you think, i should put the same TNS in my local machine??
    ab.bc.xy.zx =
    (DESCRIPTION =
        #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.110)(PORT = 1521))
        #(ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.120)(PORT = 1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = 10.20.30.130)(PORT = 1521))
        (LOAD_BALANCE = yes)
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SID = cap2)
    thanks,
    BK.

  • I can't login on my Mac I am the administrator. Other users can log in.

    I Can not login to my mac desktop. I am the administrator. Other user can log in

    You might also want to take a look at this article:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    These are instructions on how to remove the app MacKeeper if you have it in your Applications folder; you may or may not also have adware installed - in which case you can run the other app to get rid of it (it will not get rid of the MacKeeper application itself though if you have it) and/or it's adware simply advertising MacKeeper. If you do not wish to download that app, here are manual instructions from Apple on how to get rid of adware:
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

  • HT2305 Hi Other Users, can someone please advise me where i can get a Leopard download for my Power Pc G5?

    Hi Other Users, can someone please advise me where i can get a Leopard download for my Power Pc G5?

    eBay is another source for Mac OS X Leopard 10.5; however be sure to ONLY purchase the retail disk shown below and not a grey computer specific disc:

  • I'm trying to share folder between users on a single mac.  I put the folder in "shared," set permissions so other user can read and write, enabled file sharing, but can't find the folder on the second user's account.  Any help?

    I'm trying to share a folder between users on a single mac.  I want both users to be able to read and write so the folder stays current on both accounts.  I put the folder in "shared," set permissions on folder so other user can read and write, enabled file sharing, but can't find the folder on the second user's account.  Any help?

    Did you log out of one account and into the other or just used Fast user switching?
    Is the permissions set to anyone?
    When you move data to teh Shared folder is it copied or just moved?
    If copied then it's not a folder both can access, just a way station like a USB thumb drive that things are coped too and off of likely.
    You can run this #5 on each user account to reset the user permissions once they are taken back out of the Shared folder
    Step by Step to fix your Mac

  • I purchased an app namesd FLV Explorer and it doesnt work and it keeps crashing and i sent a report to itunes so they can refunde my money back but they wont answer me back :( please help me :(

    and it doesnt work and it keeps crashing and i sent a report to itunes so they can refunde my money back but they wont answer me back please help me

    We are all itunes users just like you.  We cannot refund anything.
    There are no refunds, but you can try contacting itunes support.  Click "Support" at the top of this page, then click the link under "Contact Us"

  • Hi i qanted to get help pg how can i download a game but they want me to verify my age but ansrewing the security question but iforgot

    Hi i qanted to get help pg how can i download a game but they want me to verify my age but ansrewing the security question but iforgot

    Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
    (90361)

  • HT4463 I got I tune gift cards...I'd like to use them purchasing other items at apple store...BUT they appear geared only to purchase tunes...it keeps referring me to billing information even though I have money in credit

    I got I tune gift cards...I'd like to use them purchasing other items at apple store...BUT they appear geared only to purchase tunes...it keeps referring me to billing information even though I have money in credit

    Credit balances do not expire. First, make sure you're logged into the iTunes Store using the account ID and password you set up, or used, when you redeemed your cards.  If you are, try signing out of the account and back in.
    If you're sure you are using the correct account and that you're signing in to the iTunes Store, and signing out and back in doesn't help, go to the Purchase History and review your purchases to make sure that you should indeed have a balance left. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display, thought it would be unlikely that you spent the entire balance unless you have a credit card on file as well.
    If you confirm that you should have balance left but the iTunes Store isn't showing it correctly, go here:
    iTunes Support
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Other user can not see the data from the workbook

    Hi Friends,
    I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
    By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
    Any body happen to know the cause or has some ideas on this issue?
    The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
    Thank you very much,
    J.K

    Hi All
    The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
    GRANT SELECT ON SYS.V_$PARAMETER
    GRANT EXECUTE ON SYS.DBMS_JOB
    The user will also need to have these grants:
    CREATE PROCEDURE,
    CREATE TABLE,
    CREATE VIEW,
    EXECUTE ANY PROCEDURE,
    UNLIMITED TABLESPACE on user's tablespace
    My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
    http://learndiscoverer.com/books/books.htm
    The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
    By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
    Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
    Collect Query Statistics
    Item Drill
    Drill Out
    My advanced VIEWER has this additional privilege:
    Save Workbooks to Database
    My basic PLUS user has all of the above, plus these (pardon the pun):
    Create/Edit Query
    Create Link
    and my advanced PLUS users get everything, which means they now get these as well:
    Grant Workbook
    Schedule Workbooks
    I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
    Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
    I hope this helps
    Regards
    Micahael Armstrong-Smith

  • Administrator can access Safari & Firefox; other users can't

    Hi:
    I have latest Safari & Firefox downloaded as well as Leopard. I can access the web browsers on my administrator account' but 3 other users in my family can't access them on their accounts. Any suggestions?

    Applications need to be in the Applications folder which allows for system wide usage.
    If these browsers are only in your Home folder, than only you can use them.
    So make sure after you have downloaded them, that they are dragged out of the Disk Image into the Applications folder, and then eject the Disk Images they came in.
    Message was edited by: roam

  • Why one user can not see plan output for some orgs while other users can?

    We have several inventory/planning orgs. Suddenly one of the users is not seeing any plan output for some organizations. While other users are able to see plan out (planner workbench) for all org.
    All users use the same responsibility.
    Deleted all the folders to eliminate hidden query in default folder.
    Any other thoughts?
    Edited by: 918894 on May 5, 2013 10:22 PM

    The issue is resolved.
    In the user preferences, one user has Inventory Category Set and other user has Planning Category Set as the default. Items belonging to one Org were not assigned Planning Category Set. Thus they were not showing for the other user.
    Thanks for the response.

  • ICal Server - User can log in from iPhone but not from Desktop Mac

    I've got quite the peculiar problem with iCal Server on OS X 10.6.6 - my users can log in and access the shared calendars using their iPhones. When I set up an the same account on their desktop Macs in iCal, I get an error message "The server did not recognize your user name or password for account <username@servername>".
    I'm positive that username and password are correct. The only thing I found about that in the log files was that the CalDAV server returns a 201 HTTP status code when accessing the account from the iPhone vs. a 407 status code when using iCal on their desktop Mac. The same accounts are used for Email, File Sharing and Address book, all of which run fine.
    Has anyone experienced a similar problem? Maybe even solved it?

    Solved it myself - there was a non-ASCII character in the account password. Strange that the iPhone didn't have a problem with that while iCal did. Now that I've changed the password to contain only ASCII characters, the problem is gone.

  • Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email

    We have a user that was complaining about not being in the address book anymore.  After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
    is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too.  As far as I know, she is the only user
    having this problem.
    She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff.  At her computer, I tried repairing her email (under account settings) but the process would fail when
    searching for her settings.  I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
    Configuration -> Disconnected Mailbox.
    Some info on our setup:
    Exchange 2007 on Windows Server 2003r2
    AD is on Windows Server 2008r2
    Her computer is running Outlook 2010
    I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed.  She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
    I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
    I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.

    First things first - is her mailbox hidden from address lists?  Run
    Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out.  It probably isn't, but we need to clear this, just in case.
    Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory?  Often, when the name on a mailbox is changed, the display name is not - and vice versa.  Also, has her email address also changed? 
    If so, has a secondary proxy address been added to reflect her maiden name?  I'd do this, just to be sure things aren't lost that should be delivered to her.
    I can't think of anything else obvious right now.  After you've checked these things, get back to us with their results.

Maybe you are looking for