In RZ20 Spool Numbers showing obsolete value

Hello All,
In RZ20, we are not able to see updated data of spool numbers , its showing obsolete value.
We are facing problems, due to spool server issues.
We cleared all old spool jobs.
SQL queries are executing for long duration on Table TST03 and TSP01.
Kindly suggest for solving it.
Regards,
Sujit Takale

Run a TEMSE consistency check and delete inconsistencies.
Regards
Juan

Similar Messages

  • Report similar to MC$4 that does not show absolute values

    Hi all,
    We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
    Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
    Thanks in advance!
    George

    HI
    Your input criteria should contain all plant numbers and the period to be analyzed.  Execute the report and then select:  Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month.  Follow the options to export to Excel.  Report will be based on Plant, Storage location and Month.
    Regards

  • AFAR test run showing the values but not posting in Real run.

    Hi Friends,
    i have an issue with AFAR recalculating the depreclation. The details are as below;
    1. Asset value date is 15.07.2010. but ordinary dep. start date was set as 01.01.2010 manually by the user.
    2. The Period control method 11, the dep. is calculated for entire year for acquisition.
    3. we have already calculated depreciation from period 12 2010 to period 04, 2011.
    4. Now, we have changed ordinary depreciation start date for 5 asset records from 01.01.2010 to 15.07.2010.
    5. Therefore, we recalculated AFAR for these assets for 2010 and test run is showing the values for these 5 asset. The same was expected by the business.
    6. When we execute the real run, it is not posting and no change in asset explorer for period 12, 2010 or in current period. No error message is available in spool / job log.
    We have opened FI periods as well.
    My question is  that why the system calculating the values in test run and if it is calculated in test run, why it is not posting in update run?
    As per the period control method, the depreciation should not recalculated for half year even we change the ordinary dep,start date from 1st Jan to 15th July.
    I  request you to clarify my doubt and help me to understand the error which is stoping the values in update run of AFAR.
    Best Regards,
    Padmaja

    Hi,
    Sorry...it is not worked out. Alternatively, i tried the shift factor with variable depreciation and i achieved the values which appeared in AFAR test run.
    Thanks for the help.
    Regards,
    Padmaja
    Edited by: PadmajaCH on May 19, 2011 3:26 PM

  • Show negative values as 0 in BEx Report

    Hi Gurus,
    I have a report which shows negative values for POs in BW BEx. The user wants all negative values to show up as 0 in the report. Is there a way I can show that as 0 in the report  for all negative numbers easily.
    Any help is deeply appreciated.
    Thanks.

    Hi,
    Make a new formula and write a simple condition like this.
    (PO value<=0)*0+(PO value>0)*PO value
    Make sure to use boolean operators while writing this condition.If any issues get back to me.
    Hope it helps.
    Regards,
    AL

  • Auto-index only shows 9 values instead of 91

    I'm pretty new to LabVIEW and am trying to show a cluster of 91 values pulled from a text file.  Just for a test run without using actual values passed, I created a text file with the numbers ranging from 1-91 (1 number per line up to 91).  When I let it auto index and try to unbundle it after transforming it from an array to a cluster, it only shows 9 values instead of 91.  Do you happen to know how I can overcome this issue?
    I have attached the basic files.
    Solved!
    Go to Solution.
    Attachments:
    For Loop Problem.vi ‏7 KB
    SMA.txt ‏1 KB

    STigmata08 wrote:
    Thank you very much, I had no idea that you could select a cluster size from the transformation.  I am converting it to a cluster because I thought that it would be the best form to insert the data into different parts of a word template.  I am trying to build an auto reporting tool for a test sequence.
    You need to set thee cluster size, because clusters are static structures and the size needs to be known at compile time. This also makes them useless for your problem.
    To extract all lines from a file, you could use Spreadsheed string to array with a 1D string array as type and linefeet as delimiter. No need for FOR loops and complicated code. Also your sequence structure has no purpose because execution order is fully determined by dataflow anyway. Why is it there? Don't clutter the diagram with useless constructs!
    Here's what you could do. You can get any element, array subsets, etc. using array tools. These are scalable and you don't need to know beforehand how many line are in the file.
    Here's a quick draft (LV8.6)... 
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    For Loop ProblemMOD.vi ‏8 KB
    ArrayNoCluster.PNG ‏9 KB

  • Report to correct FD33 report is showing incorrect values ??

    Hi Guys,
    Will appreciate your help on below issue.
    The "RVKRED88 - Reorganization of SD credit data after updating errors" report is showing incorrect values.
    It is specially observed for invoice correction requests that are credit blocked.
    The doc flow is like  Order (say value  1000 $), delivery, shipment, Picking, GI, billing, accounting all cleared/complete.
    The invoice corrrection req (say value  -ve 50$)  was then created with reference to the billing doc.
    The RVKRED88 report shws the original order as open and also shows an open delivery value of 1000$ + 50$= 1050$.
    Is this behaviour correct? If not what might be the cause of this? and how to correct it?
    Regards,
    Naminator
    Edited by: Naminator on Jul 7, 2009 6:22 PM

    I am not sure, how come you are getting correct numbers for UK plant if BX is not loaded. You can get numbers correctly only in one situation which is your initial stock at that plant was ZERO, which is practically not possible.
    You said you are loading for Denmark only.
    Was the BF init done only for UK?
    How come you are loading BF Delta for UK only?
    Did you check properly that BX is not loaded into production by changing the date range. Make sure you put the lowest date range in the from field. I would put 01/01/1000
    As you said ISS is coming right because those are movements and they dont have to do anything with initial stock, but initial stock and movements affec your Total Stock Key Figure.
    - Danny

  • LOVs with obsolete values

    Hi,
    I have a lov that can have obsoletes values when a date field is informed.
    If I put the condition to show values that have the date field null, this lov will show the correct values for an insert operation, but not for an existing record that references a obsolete value in this lov.
    How do you solve this problem?
    Thanks
    Mark

    There are two things you need to do:
    1. use a query like this
    SELECT description d, key_value r
      FROM lov_table
    WHERE obsolete = 'N' OR key_value = :p1_lov_item2. make sure the session state of the p1_lov_item is set during the page load.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    http://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • Line chart showing final value only?

    Is there a way to have a line chart that shows the value against the final data point only?
    eg something like this
    ----------------------74
    instead of
    1----13----28---42----74
    Thanks

    Thanks I appreciate your comments and agree I will have to put some effort in, I tend to try and work things out I need by messing around when I need a specific function or have a specific thing I want to do and focus on that without perhaps learning the underling basics.
    I've been spoiled by Excel, there is a lot of stuff its significantly easier (for me anyway) to do without undergoing any learning curve at all, with wizards for functions (for example) and in many cases if you right click on something you can alter it right there, rather than having to go up to the inspector and work out which of umpteen functions the bit you want to alter is hidden in. If the inspector was a person, I would have strangled them to death by now
    I'm not sure if this is my Mac or what, but if I go into numbers help and type anything in, I just get the spinning thing next to the magnifying glass, but it never comes back to me. It works OK if I follow links. For example I just typed 'charts' in help and hit enter, 5 minutes later I"m still waiting. Doesn't increase my confidence I'll have to look into that and see whats going on.
    Thanks to everyone for your help, the guys will be impressed with the new chart !

  • Report -- filter with selection list -- show all values after select page

    Hello!
    I have the following problem:
    - I have a report
    - this report can be filtered with a selection-list
    - the selection list is based on dynamic LOV and has a null-value
    - I added the code of the report the following, to filter the report after choosing a value of the selection list:
    ... and (instr(type, decode(:P8_FILTER_type, '%null%',type,:P8_FILTER_type)) > 0)
    This works very well.
    But my problem is: When the user logs out and the next time, he logs in, the selection list shows " --- show all values --- " (my null-display-value) and the report is empty "no values found".
    ---> I want to show the first time, the page is selected ALL the values of the report. (this is now only possile if I press the button which belongs to the selection list)
    I hope, somebody understands my problem.
    Thank you so much,
    LISA

    Hello Lisa,
    The first time it's probably NULL.
    So what you can do in your where: (instr(type, decode(NVL(:P8_FILTER_type,'%null%'), '%null%',type,:P8_FILTER_type)) > 0)
    Off topic: I also wonder if that where clause can't be simpler? Do you rely need the instr?
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/

  • SelectOneChoice not showing all values from database

    Hi!
    I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
    P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
    Code:
    <af:selectOneChoice id="selAction" value="#{row.idCmd}"
    unselectedLabel="&lt;Selecione>">
    <af:forEach var="alertTypeNode"
    items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
    <af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
    label="#{alertTypeNode.dataProvider.nmCmd}"
    id="si1"/>
    </af:forEach>
    </af:selectOneChoice>

    In your page binding check the rangesize setting for the executable you use - set it to -1.

  • How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

    Hi Everyone,
    Iam stuck with 1 problem please can any 1 help me if u know the solution.
    Here is my problem:
    How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
    For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
    And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

    Thanks Nikhil. But I am fetching the values from the LOVCache.java.
    I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
    I mean to say can I write
    unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
    where LOVCache.entityTypeSelectionList is used to populate the drop down box.
    Regards,
    Aseet

  • MC$4 report shows PO value in wrong currency

    MC$4 report shows PO value in wrong currency EUR (EURO) eventhough PO
    was created with SEK (swiss) currency. Report picks data from info
    table S012 that also reflects wrong currency.
    Please check attached example....
    Currency is getting picked up in table S012 info-structure from company
    code table T001 (PO belongs to) not from purchase order.
    This is certainly bug in standard SAP LIS report. This is inbuilt LIS feature given by SAP & we cannot do any fixing.
    Can you provide solution how we can correct this error. How to display correct currency in report & info-structure S012.

    hi
    in the report the system might be taking the co code currency
    what u have to do is go to  MC$4  press ctrl+F7
    u will get the currency change option change it to what u want
    regrads
    kunal
    awrad if helpful

  • Limit SC showing Zero value in report SC per cost centre in SRM portal

    Hi SRM Gurus,
    On executing SC per cost centre report avaialble in SRM 5.0 Portal I am getting value of limit SC as zero. while in all other follow on documents i.e. PO and Invoice its displaying the value.
    Is it due to the fact the for Limit Items we don't have any GR/confirmation i.e zero quantity? and the value column field has Sigma symbol on it. so maybe it is multiplying quantity with the value here?
    Is this SAP SRM standard for limit items to show zero value in this report ?
    Please let me know. Thanks for the help.
    Regards,
    Varun Dhawan.

    SRM experts please help in this regard. Any insights on LIMIT Shopping carts??

  • ALV report run In background gives 2 spool numbers

    Hi ,
    The ALV report which I am running in Background gives me 2 spool numbers after the Job is created in sm37.
    I am just executing my ALV report by running it in backgroung procressing, but I get 2 spool one has all the correct data of the ALV and 1 blank spool is created.
    I have Passed the followin parameter to my ALV FM.
      lwa_print-no_change_print_params = 'X'.
      lwa_print-no_print_listinfos = 'X'.
        CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
         i_callback_program       = sy-repid
         i_callback_pf_status_set = 'SET_PF_STATUS'
         i_callback_user_command  = 'USER_COMMAND'
         i_default                = space
         is_layout                = t_layout
         is_print                 = lwa_print
         it_fieldcat              = t_fieldcat
       TABLES
         t_outtab                 = t_final
       EXCEPTIONS
         program_error            = 1
         OTHERS                   = 2.
    Unable to find the reason why I get 2 spool created for it?
    Thanks
    Ritesh

    Hi venkatesh,
    Thanks for the reply.
    I tried that also but issue was due to a SKIP statement called in the program and due to which a new spool which was blank was called.
    The issue is resolved.
    Thanks
    Solanki Ritesh

  • Query on virtual cube showing incorrect values

    Experts,
    I have create a virtual cube on a base cube using services (info-source). both virtual as well base cube are z-development and are in BI.
    Base cube has 6 records, now when I check data in virtual cube using display data it shows correct values based on routine written in virtual cube transformation.
    Problem is when I created query on this virtual cube it doesnt show correct data or sometime no applicable data. After debugging I found, in end routine itself result package contains records with blank values in it on which I have written routine. But it does this only while executing query not when I display data in cube.
    Regards,
    Akshay

    Hi!!!
    And how do you solved it?

Maybe you are looking for