PSE 6 - registration problem

I am so incredibly frustrated with Adobe right now.
I have been happily using PSE6 for my work for 4 years.
Last week, upon opening the program I got a white blank box instead of the registration box that I have
skipped for 4 years (lesson learned).
After researching forums, and trying to reinstall several times, I traveled 30 miles to Apple Genius bar yesterday
and they determined it was a "licensing" problem.
Last night I registered the product with Adobe. Still would not open.
This morning I tried to call them but of course they referred me to the chat.
I just spent one hour on chat and was told:
I truly understand your concern however, Photoshop elements 6 is an older version, we support only for latest version. Please visit the forums our Adobe experts will definitely give you the resolution.
and
I highly recommend you to purchase the latest version of Photoshop elements so that you will not face any issues.
So, I need a miracle from you at the forums. I have wasted so much time trying to get this resolved and need PSE for work.
One other thing that I don't know is involved. My daughter is taking a digital media course and she down loaded my PSE as well.
Also, she is doing a free trial of Flash and is using Creative Cloud. Problem seemed to start for me after this. She has uninstalled PSE on her computer now.
If I have to buy a new PSE - what version will work on OS 10.6.8

OMG - 99jon - can I send you cookies!!!!
THIS WORKED!!!!
Amazing!
Apple Genius Bar and Adobe chat couldn't help - hours spent trying to deal with them -
and in 5 minutes I get this response from you and magically I have my beloved PSE back.
Many many many thanks!!!!

Similar Messages

Cisco 9951 and cucme registration problem

Hi Everybody
I am trying to register a cisco 9951 phone to a cucme. The phone was previosly connected and registered to a cucm 9.1, now it must be registered in the cucme. The problem is that the status messages of the phone show that the phone has 9.3(2) firmware version and the cucme has 9.2(1) sip9951.9-2-2SR1-9.loads. It means that the phone has a higher version than the version in the router flash (cucme).
I tryed tod download a newer cucme file-set but the last version available in cisco.com is the 10.0 and it has the sip9951.9-2-2SR1-9.loads file which is still older than the version in the phone. So the phone doesnt register.
I follow step by step the instructions to configure and register ip sip phones to cucme. but I am stock.
here is the configuration:voice register global
mode cme
source-address X.X.6.54 port 5060
max-dn 10
max-pool 5
load 9951 sip9951.9-2-2SR1-9
timezone 42
tftp-path flash:
create profile sync 0001184550824421
camera
video
voice register dn 1
number 4002
name SIPPhone 2
voice register pool 1
id mac 501C.BFFC.DD85
type 9951
number 1 dn 1
username nico password 12345
description +571344002
camera
video
tftp-server flash:Phones/9951/dkern9951.100609R2-9-2-2SR1-9.sebn alias dkern9951.100609R2-9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/kern9951.9-2-2SR1-9.sebn alias kern9951.9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/rootfs9951.9-2-2SR1-9.sebn alias rootfs9951.9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/sboot9951.031610R1-9-2-2SR1-9.sebn alias sboot9951.031610R1-9-2-2SR1-9.sebn
tftp-server flash:Phones/9951/sip9951.9-2-2SR1-9.loads alias sip9951.9-2-2SR1-9.loads
tftp-server flash:Phones/9951/skern9951.022809R2-9-2-2SR1-9.sebn alias skern9951.022809R2-9-2-2SR1-9.sebn
the status mesages on the phone say:
Upgrade rejected: HW compat failure. Must use 9.3(2) or later release on this phone
Error updating locale
It still shows:
File not found United_States/g4tones.xml
File not found SIP_English_United_States/ik-sip.jar
Those files tha the phone doesnt find are in the cucm 9.1. I tryed to put them in the flash and configured the tftp-server command and I also downloaded the 9.3(2) from the cucm and copied to the router flash, but it still has registrations problems.
I also tryed to reset the phone to the factory defaults but this sequence with # key and 123456789*0# doesnt aply to sip phones and the procedure of the following link still doesnt work:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/10_0/english/adminguide/P567_BK_A27DADFD_00_adminguide-8961-9951-9971-10_0/P567_BK_A27DADFD_00_adminguide-8961-9951-9971-10_0_chapter_010100.html
Please help me with this issue.
Best regards

Hi Sayeed,
Can you please send accross SIP messages when phone is trying to register with CME ?
Thanks
Manish

PSE 12 and PS 12 registration problems

I had pse11 and ps11 working on my computer using xp.
They stopped working with the invalid serial number problems that has plagued Adobe recently.
I filled in the required request forms for Adobe to fix it and received back new serial numbers that would work with PSE 12 and PS 12.
I then downloaded the new versions and installed them.
However I cannot use them because when it asks me to register the products it tells me that the certificates have expired.
I am using the correct login and password, without success.
I need these programs for work purposes
Any help?.

Here is an update.
I have now been able to use both PSE 12 and PS 12, however It is the trial version.
When I go to register the products I am asked to log into my Adobe account.
I then enter the serial numbers, am told that the certificates are invalid, and I end up at the operating screen of the trial versions.
I have logged into Adobe account directly and have entered the serial numbers of PSE 12 and PS 12, these have been accepted and appear under my products.
However both programs still open up as trial versions.
Anyone else with ideas about what is going on??

PSE 8 printing problem with HP 8750 Printer

When trying to print oversized (10 x 11) images in PSE 8 with my HP 8750 printer the printed image looks like a postage stamp. I've done everything the same as I did with PSE7 and the same printer with no problem. What could the solution to this? It's quite frustrating, not to mention the ruined 12x12 paper, which is a bit expensive. I upgraded to Windows 7 64-bit a few months ago and had no problems installing the printer or PSE 8. Everything has been working smoothly up to this point. Has anyone else experienced this problem?
Thanks for any help that you can offer.
Lizzi

Hi:
What I should have said is that the image "is the size of" a postage stamp...about 1 inch x 1 inch.
I'm still wrestling with this. I finally got a page to print out correctly, now the 2nd page is giving me fits, and I though I wrote down all the settings, but apparently I must have missed one.
Lizzi

LMS application registration problem

Hi,
I have a problem with the application registration of Campus Manager 5.2.1 under LMS 3.2.
Right now in the "Functional" tab of the LMS portal the "Campus Manager" view is empty.
In "Common Services" - "Server" - "Home Page Admin" - "Application Registration" Campus Manager is missing in the list of registered applications.
I can connect to the Campus Manager using the direct link http://<servername>:1741/campus/adminIntro.do.
The "CM" tab on the LMS portal page works.
I tried to register it this way:
In the CS Homepage Admin I click on "Register" - "Register from Templates" - "Next"
Then I get the list of templates. I select "Campus Manager" - "Next".
I enter these values:
Server name: fully qualified name of the server
Server Display Name: hostname of the server
Port: 1741
Protocol: http
When I click on "Next" - "Finish" the Campus Manager is not added to the list of registered application and I get no error message.
Did I enter wrong values? Where can I find corresponding log/debug messages?

It sounds like the CMIC database may be corrupt. There is a process to recover this, but it's somewhat complicated. If you open a TAC service request, your engineer can walk you through the process. This will clear out the CMIC database and reregister all applications. That should sort you out.

HP Officejet Pro L7780 - Registration Problem

I downloaded and installed the full software for the HP Officejet Pro L7780. When the software asks to be registered and I put in the printer and the search comes back 0. I have tried the name and the product number and still keep getting the same result 0. When I hit enter, the registration goes away and I have this running on my computer. I can't seem to get it to complete. Please tell me there is a simply solution to this. Thanks
This question was solved.
View Solution.

I fixed the problem by terminating the process and everything is right with the world.

Windows 7 & PSE 8 printing problem

I have Windows 7 and just installed PSE 8. When I go to print in editor (select printer is correct)...and hit print.... The printer changes to wanting to send a fax. None of my other programs have a problem printing including CS5. I can print from the organizer. This is a new computer and printer/fax machine. I have spent hours trying different things to no avail. I have had several versions of PSE and always was able to print from the editor. Any suggestions?
Thank you.

I had exactly the same problem with the same configuration; WIN7 (64 bit) and PSE 8. After reading that deleting the FAX driver worked for you, I went to Control Panel > Devices and Printers. My printer/fax shows up as two separate devices: HP Photosmart Prem-Web C309n-s, and HP Photosmart Prem-Web C309n-s fax. I renamed the fax entry only, by inserting my initials at the front of the device name (before HP) ... et Voila!, PSE 8 can now find and print to the printer device rather than the fax device. This should allow you to select and use the fax device when desired, by any program.
To rename the device, go to Control Panel > Devices and Printers > Highlight the fax entry > Select the Toolbar's File entry > Select Printer properties > Select General Tab. You may rename the device name here, whereas the regular properties displays don't let you rename.
Thanks for asking the question, and posting your own resolution. I am sure that we are not alone with this issue.

PSE 9 printing problem with Epson printer

hello there,
I am using PSE 9 with Windows XP and Epson 3880 printer. I have re-installed all programs/drivers a couple of times. PSE9 Printer dialogue will not let me print choosing "Let Photoshop Manage Colour". It will only let me print with "Let Printer Manage Colour". I am using Epson papers.
When I select "Let Photoshop Manage Colour", a box appears saying "ICC profile no longer available" and it won't let me print. Is this a PSE 9 problem or an Epson problem?
thanks !!!

Well, I actually found the answer. I spoke to an Epson Rep!
I used to have the Epson 2200 printer, then the Epson 3800, and now I use the 3880 printer on Windows XP and Windows 7 on my laptop.
When you uninstall the other 2 printers, the color profiles are still in your program files and can become corrupted.
This is why, in PSE 9, when I checked the box Let Photoshop Elements Manage Colour, it woildn`t print and instead there was the pop-up box ``ICC profile no longer available`` because it was trying to access the old paper profiles and not the ones that came with the 3880. I use Epson papers, by the way.
The solution was to go into C-Drive, Program Files, System 32, spool,drivers, colour, and this opens to the ICC profiles used by the printer. Then I deleted the old paper profiles associated with my former printers.
And it worked !!

Product registration problems

with respect,
hello, im am charlie, I just bought a macbook pro 15 "on 01-july-2011 in eStore authorized resellers in Indonesia with no series" W8050XXXXXX "and register the product. until now dated 04-july-2011 and I did not receive a confirmation e-mail that the macbook pro 15 "I have been registered.
and if I check on https://selfsolve.apple.com/agreementWarrantyDynamic.do
it will look something like this:
"Please register your product
Apple is Unable to Provide information about your service coverage. Please sign in with your Apple ID and Provide your product's date of purchase so That We Can display your coverage information. "
and if I continue to fill in the date of purchase then it would appear are like this:
"We're sorry, but We Are Unable to register your product with That purchase date. To complete registration, please submit your proof of purchase.
Your warranty is the same whether or not you register. See your service options "
so, what should I do?
please help for this problem quickly resolved perfectly.
Charlie
Indonesia

not like that, because of its web interface written in day / month / year
so what should I do? Anyone know the email contact apple is concernedwith thisproblem?

PSE 7 launching problems

I use XP SP3 and when I click on Photoshop Elements 7 I only get an hourglass for about 3 seconds then nothing happens. Task Manager thinks PSE is working!
Ankush is working on this already and will, I hope, find a solution!
Peter

These symptoms sound like problems with Adobe's licensing service. See step 6 of this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_Organizer_ crashes
If that doesn't help, try steps 3 - 10.

PSE 7 editor problems

I loaded PSE 7 on a Dell 5100 dimension with all the necessary system requirements but when I try to open the editor it wont open and reports an error,I have removed any other photo processing packages or old adobe programmes,I also loaded PSE 7 on a Toshiba laptop and I have no problems there, any suggestions?

Unfortunately, there are many reasons why the PSE Editor might crash, and often it is hard to diagnose quickly the reason for the crash. Here are some steps you can take to try to fix the problem. Even if you think you’ve tried some of these before, try them again, precisely as described here:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

PSE 7 Share problems

I cannot get PSE 7 to send either email attachments or Photo-mail properly.
When I attempt either of these I get all the way through the process, but when Elements opens my email software (Outlook Express) which is the default email in Elements I get a screen that looks like I am reading an already sent email, Sender unknown, all the Adobe advertising is there and the attached photos appear normal. There seems to be the ability to reply or reply all as if I had received it. It is NOT in my in basket or sent mail basket.
HOWEVER, there is no way to send the blasted thing to the receipent selected in my contacts.
This same result occurs with Photo Mail.
I had no such problems with PSE 6.
Is there a solution??
Thanks

I guess I solved my own problem. I re-installed Microsoft Outlook which I had used until a couple of months ago. I thought it was "overkill" so I went to Outlook Express and un-installed Outlook. After a re-boot I can now send email attachments etc. normally. Apparently something got confused in the process even though I changed the default email client in both PSE7 and the computer in general.
Computers................!!!!!!!!!!!!!!!?????????

Ccmsping registration problem in Solution manager

hi,
I am installing CCMSPING agent to check "System Availability" from Solution Manager.
In our system ladscape we have multiple systems on sigle host. for eg) TP7 & DW1 on single host cpafisb8.
I have successfully registered the CCMSPING agent in Solman.
I have followed the Availability doc for registeration CCMSPING. Following are the major steps that i have done:
1)Download & extract CCMSAGENT from market place.
2)Configuration of Central Monitoring system.
3)Registration of CCMSPING using command u201Cccmsping -push -Ru201D.
4)Configured Availability Monitoring in Central System (i.e. Solution Manager) in RZ21.
As result i can see the stellite sytem node in RZ20 under " SAP CCMS Monitor Templates-->Availability and Performance Overview".
When i go to transaction "solman_workcenter" in tab "System Landscape management", i can see the staus of system as Green for the system i registered.
Now, the problem i facing in in transaction solman_workcenter is described as follows:
As i mentioned We have multiple systems on single host, for eg) TP7 & DW1 are on the same host "cpafisb8",
hence if CCMSPING has been registered for TP7 the status is green for DW1 too even if DW1 has no entry in RZ21.
Strange thing is DW1 was showing.
I have tried following three options to make the status correct in solman_workcenter:
1) I have maintained hostname for TP7 as "TP7.afis.chevrontexaco.net" which is alias for
hostname cpafisb8 in RZ21 & SMSY & status is correctly showing green for TP7 but still for DW1 which is not defined in RZ21, status is showing green.
2)I have unregistered the CCMSPING fron TP7. TP7 status has been changed to gray but strange thing happeneing was DW1 status was still green even no ccmsping process was running on the DW1 host.
3)I have registered the CCMSPING for TP7 with its central instance profile options using command:
ccmsping -R -push -n31 pf=/usr/chevron/TP7/profile/TP7_DVEBMGS31_cpafisb8
and agin configured TP7 in solution manager & status changed gray to green for TP7, but no change happening in DW1 status.
Can anyone please help on this strange behavior of Solman_workcenter.

Hi,
Thanks for he reply..
But i have already followed the process that you described or CCMSPING registration. and CCMSPING is transfering the data successully from satellite system to solution manger.
And as result of successul registration i can see the status of that satellite system as green in transaction "solman_workcenter".
But as i described earlier we have multiple systems registered on single host.for eg)SY1 & SY2 on host1
Hence even though the CCMSPING is not registred for SY2 & only registered or SY1 on host1 with RZ21 configuration in solution manager for SY1; SY2 status is also shown green in transaction solman_workcenter.
I want that only status of SY1 should be shown as green in solution manger under transaction "solman_workcenter".
I hope you understood the issue.
thanks

Registration problems using itunes Music Card

Hi - anyone out there having a problem registering with a music card? Seems music store has acknowledged redemption of card but will not allow registration because payment field demands credit card details which, naturally,I don't want to give!
Also support says there is a "None" button in payment field to indicate no credit card because you want to use a music card but when I register there is no such button!
Could my problem have been caused because I redeemed the music card BEFORE registering for an account?
Have sent an inquiry e-mail to iTunes but thought someone out there might be able to help out a bit quicker! Thanks

You redeem a card one time only. The entire amount is then transferred to the account that redeemed it. The card is of no use after this. The credit has beenr edeemed. it does not stay on the card at all.

Please help-- PSE 7 editor problem

When I open PSE 7 in edit I get the following message: Photo Shop Element (Editor) has stopped working. A Problem caused the program to stop working correctly. Close the program.
I have uninstalled the program, reinstalled and it works okay for about a week. Then the message reappears. I've done this 3 times [uninstalled, installed]. I tried opening Organize and it works properly. I tried to go into edit from organize but get the error message when edit opens. Can someone help me, please. Thanks, Doris

Can you reimage your machine and try thhis out again.

PSE 6 - registration problem

Similar Messages

Maybe you are looking for