In spool to pdf format i am not getting the entire recod
i am converting spool data into pdf format using the std program RSTXPDFT4 but i am not getting the entire data, the data is getting truncated side ways ie entire record is not getting generated.
in the main prg is rstxpdf4 i have given line-size to 512, even thou, i am not getting the entire record
Try the following:
SELECT u_permit.DATE_APPLICATION_RECEIVED, u_permit.permit_status
FROM U_PERMIT
WHERE u_permit.date_application_received BETWEEN to_date('01/21/2008') AND to_date('12/31/2008')
AND trim (upper(u_permit.permit_status)) = 'PENDING' ;You can also apply a date format in the TO_DATE if needed.
eg:
to_date('01/21/2008','dd-mon-yyyy')Hope this helps.
Craig...
Similar Messages
-
I use a MacBook Pro
After purchasing an Adobe PDF Pack, I still don't get the Content Editing option on my Tools bar
please adviseThanks Sara, however my understanding is what I purchased enabled me to
convert pdf into word for editing, please see screen shot attached. I
believe this shows that in the PDF Pack which i have purchased I am able to
do this.
Please further advise
Cheers
Therese
Therese S
[private information removed by moderator]
On Thu, Mar 12, 2015 at 5:48 AM, Sara.Forsberg <[email protected]> -
I purchased a 10 episode tv series I paid for it, but I only got half the series, where is the rest?
Really?? No one knows??
This is an Apple support forum is it not?
If anyone can at least point me in the right direction that would be great!! -
What am I doing wrong? I transferred all my pictures to my computer and some of the pictures are only half or 1/4 of the picture.. Rather upsetting and I don't know what to do... Please help...
Hi Anjohi,
Thanks for visiting Apple Support Communities.
If you've edited photos on your iPad and only see the original version when you import them to your computer, the tips in this article may help:
iOS: Edited photos show original photo after import or in other apps
All the best,
Jeremy -
Problem concerting spool to PDF format
Hi all,
I am trying a small program to write ABAP list to spool, and within the same program I am trying to convert the spool into PDF format. I am including all the code , please can any one check and tell me where I am going wrong. I am getting a message saying 0 bytes transferred.
Even the contents of the table pdf_table is empty.
REPORT ZWRITE_SPOOL .
tables tsp01.
DATA: val(1) TYPE c,
pripar TYPE pri_params,
arcpar TYPE arc_params,
lay TYPE pri_params-paart,
lines TYPE pri_params-linct value 60,
rows TYPE pri_params-linsz value 80.
data : w_spoolnumber like tsp01-RQIDENT.
data : w_device like tsp03-PADEST value 'H278' .
data begin of pdf_table occurs 0.
include structure tline.
data end of pdf_table.
data : MI_BYTECOUNT type i ,
MC_FILENAME LIKE RLGRAP-FILENAME.
DATA: MTAB_PDF LIKE TLINE OCCURS 0 WITH HEADER LINE .
data pdf_fsize type i.
DATA: MSTR_PRINT_PARMS LIKE PRI_PARAMS ,
MC_VALID(1) TYPE C .
CONCATENATE 'C:\TEMP\' sy-repid '.PDF' INTO MC_FILENAME.
*---- Code added
pripar-pdest = 'H278'.
pripar-prcop = 001.
pripar-plist = sy-repid.
pripar-prnew = 'X'.
pripar-pexpi = 8.
pripar-linct = 65.
pripar-linsz = 80.
pripar-paart = 'X_65_80'.
pripar-prsap = 'D'.
pripar-prrec = sy-uname.
pripar-prdsn = 'LIST1S'.
pripar-ptype = 'TEXT'.
pripar-armod = 1.
*---- End of code
perform format.
select single RQIDENT from tsp01 into w_spoolnumber
where RQ2NAME = sy-repid .
NEW-PAGE PRINT OFF.
write w_spoolnumber.
perform spool_to_pdf.
Form format
FORM format.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = arcpar
in_parameters = pripar
layout = lay
line_count = lines
line_size = rows
no_dialog = 'X'
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF val <> space AND sy-subrc = 0.
PERFORM list.
ENDIF.
endform. " format
FORM list.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
write 'SAP PROGRAMMING USING ABAP'.
ENDFORM.
Form spool_to_pdf
form spool_to_pdf.
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid = w_spoolnumber
no_dialog = 'X'
DST_DEVICE = w_device
importing
pdf_bytecount = pdf_fsize
tables
pdf = pdf_table
exceptions
others = 0.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
BIN_FILESIZE = MI_BYTECOUNT
FILENAME = MC_FILENAME
FILETYPE = 'BIN'
IMPORTING
ACT_FILENAME = MC_FILENAME
TABLES
DATA_TAB = MTAB_PDF
EXCEPTIONS
INVALID_FILESIZE = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
CUSTOMER_ERROR = 7
OTHERS = 8.
endform. " spool_to_pdf
Thanks,
Varun.hi Varun,
Check for the <b>internal Table data/work area</b> as whether data is getting populated in to that or not.
i.e,
CALL FUNCTION 'DOWNLOAD'
EXPORTING
BIN_FILESIZE = MI_BYTECOUNT
FILENAME = MC_FILENAME
FILETYPE = 'BIN'
IMPORTING
ACT_FILENAME = MC_FILENAME
TABLES
<b>DATA_TAB = MTAB_PDF</b>
EXCEPTIONS
INVALID_FILESIZE = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
CUSTOMER_ERROR = 7
OTHERS = 8.
<b>check whether data is getting populated in MATAB_PDF in debug mode.</b>
Regards,
Santosh -
While converting spool to PDF, no data is coming in the PDF file.
Hi All,
I am submitting a z program ZPR022_INNCOMETAX_REPORT_COPY1 (which has some output display) from Z_ITSLIP_MAIL. I am creating a job, submitting the above program via JOB to SAP-SPOOL.
In program ZPR022_INNCOMETAX_REPORT_COPY1 , I am getting the run time job information and from there I am getting the spool id. Now I am converting the spool id to a PDF. This PDF should contain the output of the program ZPR022_INNCOMETAX_REPORT_COPY1. This output is normal output using Write statement only. But once the program is executed, I could find no data in the PDF file. When I check in SM37 and SP02, both the JOB and the SPOOL are created. What I feel is the program is not picking the spool id at the run time. Could any one help me in this regard how to proceed.
Please find the code below.
Program 1.
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_job
sdlstrtdt = p_sdat
sdlstrttm = p_stim
IMPORTING
jobcount = l_jobcount.
SUBMIT ZPR022_INNCOMETAX_REPORT_COPY1
WITH pnptimr6 = 'X'
WITH pnpbegda = period-low
WITH pnpendda = period-high
WITH pnppernr-low = pernr-low
WITH pnpabkrs-low = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
WITH immediately = 'X'
KEEP IN SPOOL = 'X'
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = p_job
strtimmed = 'X'
PRDMINS = 2.
sdlstrtdt = p_sdat
sdlstrttm = p_stim.
ENDLOOP.
Program 2.
IF sy-batch EQ 'X'.
LOOP AT pnppernr.
SELECT SINGLE * FROM pa0105
WHERE pernr EQ pnppernr-low
AND subty EQ '0010'
AND endda EQ '99991231'.
p_email1 = pa0105-usrid_long..
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
IF sy-sysid = c_dev.
WAIT UP TO 5 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ENDLOOP.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
EXPORT gd_spool_nr TO MEMORY ID 'SPOOLTOPDF'.
ENDIF.
ENDFORM. " SEND_MAIL
*& Form get_job_details
text
--> p1 text
<-- p2 text
FORM get_job_details .
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM. " get_job_details
*& Form obtain_spool_id
text
--> p1 text
<-- p2 text
FORM obtain_spool_id .
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
MESSAGE s004(zdd) WITH gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM. " obtain_spool_id
*& Form convert_spool_to_pdf
text
--> p1 text
<-- p2 text
FORM convert_spool_to_pdf .
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " convert_spool_to_pdf
*& Form process_email
text
--> p1 text
<-- p2 text
FORM process_email .
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
ENDFORM. "process_email
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'IT Declaration'.
CONCATENATE 'ITSLIP' ' ' INTO gd_attachment_name.
it_mess_bod = 'IT FORM for this month'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
TABLES it_mess_bod
it_mess_att
USING p_email1
'MindTree Payroll team'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
CHANGING gd_error
gd_reciever.
ENDFORM. " process_email
*& Form send_file_as_email_attachment
text
-->P_IT_MESS_BOD text
-->P_IT_MESS_ATT text
-->P_P_EMAIL text
-->P_4422 text
-->P_4423 text
-->P_GD_ATTACHMENT_NAME text
-->P_GD_ATTACHMENT_DESC text
-->P_P_SENDER text
-->P_GD_SENDER_TYPE text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM send_file_as_email_attachment TABLES it_message
it_attach
USING p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
CHANGING p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. "send_file_as_email_attachment
Points will be rewarded.
Regards,
BalajiHi,
I think you are retrieving the spool before the entire spool is generated.
Put the following logic to retrieve spool iD
CHECK WHETHER STATUS OF JOB IS COMPLETED OR CANCELLED
WHILE 1 = 1.
GET THE JOB STEPLIST WHICH HAS THE SPOOL NUMBER
CALL FUNCTION 'BP_JOB_READ'
EXPORTING
job_read_jobcount = w_jobcount
job_read_jobname = w_jobname
job_read_opcode = '35'
JOB_STEP_NUMBER =
IMPORTING
job_read_jobhead = wa_jobhead
TABLES
job_read_steplist = i_jobsteplist
CHANGING
RET =
EXCEPTIONS
invalid_opcode = 1
job_doesnt_exist = 2
job_doesnt_have_steps = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
BEGIN OF INSERTION U179942 E1BK928781
IF STATUS OF JOB IS COMPLETED(F) OR CANCELLED(A)
READ THE JOBSTEPLIST & GET THE SPOOL NUMBER
IF wa_jobhead-status = c_a OR wa_jobhead-status = c_f.
READ TABLE i_jobsteplist INTO wa_jobsteplist INDEX 1.
CHECK wa_jobsteplist-listident <> space.
w_spool_number = wa_jobsteplist-listident.
EXIT.
ENDIF.
ENDWHILE.
Best regards,
Prashant -
PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12
Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report. -
We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document
link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the
check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe
settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.Hi,
According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
It will be better if you can descript how you
get the check out option as expected when you click on the pdf document in the library.
Then I upload a
word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
I recommend to use the other type docuemts to check whether the check out option works.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Issue with getting the entire spooled job into the pdf document
Hi All,
My scheduled job runs fine and completes successfully but it appears to have some issues with getting the entire spooled job into the pdf document which it sends to a an end user.Has anyone encountered it before.Your kind assistance would be appreciated.
Thank you.
Regards,
JohnHi,
Please read below link for your query:-
http://help.sap.com/saphelp_nw04/helpdata/EN/85/54c73cee4fb55be10000000a114084/content.htm
Regards,
Anil -
How do I view/print a pdf document in an email? I'm not getting the little hand icon.
Ah, yes, I'm using Adobe Reader! That makes sense. Thanks so much for your reply. At the moment, I scan Word documents into my computer and they're automatically converted to PDFs. If I had Adobe Acrobat on my computer, and scanned in documents, would they open in Reader automatically or could I open them in Acrobat and therefore add password protection?
-
I am having problems setting up a new 7th gen IPod NAN or both my Windows 7 and Windows Vista PCs. When first connecting I did not get the setup screens and cannot sync existing media. The NANO assumed the name of a previously installed IPod touch and resetting does not clear this name. I have tried uninstalling and reinstalling iTunes.updating driver software and resetting the NANO without any success
Purchased as new at Best Buy. As far as I know it was noever formatted prior to my purchase
-
We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.No the person who can check out using the link in the email has the same permissions as me. We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason. However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with. This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library. My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server. Hopefully someone can figure this out ☺
-
Half of my imported files do not import the entire file?
I recently shot some high speed video using 2 Phantom high speed cameras. After converting the clips form their raw format to AVIs at 5 fps, I imported them into Premiere Pro CS5 to put together a side by side comparison. All of the AVIs imported into Premiere, however approx. half of the clips didn't fully import. For example a clip that is supposed to be 01:09:24:13 is coming in at 00:00:28:27. It's not a random compression, because when I compare the clip playback in premiere it does indeed represent the first 28 seconds of the AVI. I tried converting the files again in the Phantom software. One of the clips I was able to import and get the entire clip, however subsequent attempts for the others has not achieved the same result. I even attempted to import the clips into Premiere Pro CS3 on another workstation with the same results.
If anyone has seen a problem similar to this, a work around or a fix would be greatly appreciated, I'm on the clock on this one.
VJAWWelcome to the forum.
Though with different file types, I have encountered similar - file Duration is mis-read in PrPro. Obviously, something in that/those file(s) header is being missed by PrPro. I have yet to find out what. As per your case, it seems to be with random files from what should otherwise be a simple group of the same file types, with the same exact conversion settings.
In my case, I get handed a lot of different file formats, and just use a conversion program to get those to DV-AVI (in my case) for SD Projects. Often, I will have a situation, rather like yours, where I will have 5 files, whose specs. all match up (same camera and settings in your case), and the conversion will be batched, and all resultant files identical. From time to time, one of those converted files will exhibit the same characteristics, as you observe. VLC, or other players, will see the full Duration, as will G-Spot, or MediaInfo. However, PrPro is missing something in that one file, and the Duration is heavily truncated, just as has happened to you. Quite by accident, I found that my PremiereElements program had no such issues with the "bad" file. It would Import and see the correct Duration, where PrPro could not. I just Imported, dragged to the Timeline, and then Exported to the same exact file settings, DV-AVI. The resulting file was identical to the problem DV-AVI that I had Imported. G-Spot and MediaInfo say it exactly the same. Various file "comparisson" programs could find no differnces between the two files, yet PrPro now saw the Duration correctly. I only wish that I could tell what went wrong, regarding the Duration in the originally converted file, and then the one that I just Imported and Exported from PrE, but I have never found the difference. I have opened the files in hex-editors, and gone line by line, and cannot find anything different between the two - but something IS different.
While I have no fix for you, I can add slight comfort by saying, "I've seen very similar, and in similar cases - conversion." My "workaround" involves some extra steps (plus an extra Export), in another Adobe program (in my case), so is not ideal. However, now that I know to be on the lookout for the possibility, I just watch those Durations closely, knowing that I might need to work on one, or more, of those files, to get PrPro to see the proper Duration.
Good luck, and maybe someone can offer us both a totally fail-safe method.
Hunt
PS - I have encountered this with my old-fav, and generally flawless DigitalMedia Converter 2.7, plus several other highly recommended conversion progams, so it does not seem specific to any one conversion program. -
I do not get the "add to" button on the right side of the screen to add items to my iphone. Help?
Please see your other post for an answer. Thank you.
Opening PDFs on iPad -
Not getting the return value of a program though it has no errors
public static String giroReturnFileDate(String strType)throws IOException{
try{
SimpleDateFormat getFormatDate = new SimpleDateFormat("yyMM");
Date date = new Date();
String str = getFormatDate.format(date);
System.out.println("Current Date is : "+ str);
System.out.println("Fetching the Giro file now");
if(strType.equalsIgnoreCase("WPD") || strType.equalsIgnoreCase("ISTD")) {
FileReader inputFileReader = new FileReader("giro2itcs_"+strType+".txt");
ArrayList list = new ArrayList();
ArrayList list1 = new ArrayList();
System.out.println("Reading the file");
BufferedReader inputStream = new BufferedReader(inputFileReader);
String inLine = null;
String str1 = null;
while((inLine = inputStream.readLine()) != null && inLine.length() < 2)
list.add(inLine);
System.out.println("Control Record for giro2itcs_"+strType+"is:"+ inLine);
inputFileReader.close();
inputStream.close();
for (int i=0; i<inLine.length(); i++ )
str1 = inLine.substring(19,23);
System.out.println("date of the transaction is:"+str1);
if (str .equals(str1)){
System.out.println("giro2itcs_"+strType+".txt file is created today");
return "true";
else{
System.out.println("giro2itcs_"+strType+".txt file is not created today");
return "false";
}// end of if
return "test";
}// end of try
catch(Exception e) {
System.out.println("The Exception is ::::::::::::::"+e);
return "one";
}//end of giroReturnFileDate(...) method
}//end of of the class
main method is seperate. this program compiles fine but am not getting the return value for this. none of the return values. plzzz help me.can you send me the code complete one ...
i will debug and solve the problem
[email protected]
By publishing your email address you are likely to get loads of spam.
Maybe you are looking for
-
Copying a file from my ipod to the PC
I have a Dell laptop running Vista with itunes installed and need to copy a large music file from my ipod 20 GB to my pc. It is one of the first ipod's.... I tried this earlier and all my music was erased from the ipod After I upload the file with th
-
Control downpayment against Purchase order
Hi all, After so long time i came to forum. Prevoiusly i did not respond proper way to the forum friens. For this i am extremly sorry... Now i am getting a problem on downpayment. Actulayy My PO Value RS 150000 Against PO my down payment should not e
-
How to add a small icon that shows up in navigation toolbars of browser window?
Silly little question and I'm not even sure what it's called, but I'm trying to (create and) add a tiny graphic icon that shows up in browser windows toolbars like this:
-
Problem in Currency field in Abap Query
hi. I have created an additional field for storing the currency type. Based on some calculations i want to store the currency type into this additonal field.But the problem is that the currency field is not getting displayed in the report t
-
Epson R2400 not printing correctly!
Hi, I hope somebody can advise me, I have problems since installing leopard and can't solve them: 1. When I try to print a photograph from Photoshop CS3 using Leopard, the picture is almost colorless( if I print from CS3 using Tiger the colors are co