In trying to connect to my email service (Bell sympatico) it cycles on and off quickly. Bell says it is a Firefox problem.

This is intermittant. I can sometimes get on. Internet works fine. Bell checked all the connections, addresses, etc. and all were correct for them. I can get to the Inbox OK but when I click on an email that's when the cycling starts. The toolbar message shows the correct address and then alternates to "connecting" - off and on.

Since Thunderbird does not run on iPads, what does this have to do with Thunderbird?

Similar Messages

  • When I connect a second display both displays start to cycle on and off.

    I am connecting a second display that works on both my macbook and macbook pro. When I connect it to my imac, both monitors start blinking on and off.
    Any ideas?
    Thanks
    Message was edited by: Stephen Ethan
    Message was edited by: Stephen Ethan

    Long story short I solved the problem, and it was totally a model issue. It is the HP w2207, which apparently has a problem with iMac 24 inch, the nvidia graphics card, mini DVi to DVI and 10.4 in particular. You see these two devices, just don't get along very well. The imac tries to auto set the monitor at one resolutions and the monitor tries to auto set itself at another, and they will continue to do this indefinitely. However both when I switched to a VGA cable, which I believe prevents the monitor from auto setting itself, and when I upgraded to 10.5 solved the problem.
    Personally I didn't mind the upgrade, as I was planning to do it anyway, and is definitely the better solution as there is noticeable difference in the color between the two cables.
    Anyway thanks for the help everyone.
    Message was edited by: Stephen Ethan

  • An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

    Hi Everyone,
    I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load.  The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
    fine the rest of the day, oddly enough. 
    A few things about my form:
    1). It is web enabled
    2). The form submits to a form library on the SP server
    3). I use the UserProfileService data connection in the form to auto-populate a few fields
    4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
    5). The form has been working fine until a few days ago
    I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped.  Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
    have the service account information.
    Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
    Schema file was already loaded: BuiltInActiveXControls.xsd
    FormServer Partial Trust - Proxy operation invoked in the SHIM process.
    FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
    Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
    The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
    Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

    Hi B.,
    You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
    If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
    Hope this helps.
    Daniel Christian (MCTS)

  • Cannot submit sharepoint form due to error. An error occurred while trying to connect to a Web service. Please Help!

    An error occurred while trying to connect to a Web service.
    An entry has been added to the Windows event log of the server.
    Log ID:5567
    Correlation ID:4db21044-cbc4-4f2f-8653-d73e5496b891

    check the log file first to get detailed information, go to ULS log file, find the related Correlation ID, you will get the error message, the information you provided is less helpful to know this issue.
    Qiao Wei
    My blog:http://blog.goobol.com

  • An error occurred while trying to connect to a Web service

    In infopath 2013 getting current user through web service getting this error in the browser
    "An error occurred while trying to connect to a Web service"

    Hi Jithendar,
    If you can send the ULS log entries which has that Correlation ID, it would be more helpful.
    The text you send is only the ID of the entries and dont give any clue to us about your problem.
    Best regards,
    Mustafa Yılmaz
    Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz

  • I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help

    I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help...

    We are starting from the beginning like its a new ipod starts out asking language, country,location services,choose a network,and when we get to "setup ipod touch  " there are 3 options 1..setup as new ipod, 2.restore from ipod backup 3 restore from itunes backup and when we hit setup as new ipod and click next it comes up with sign in with apple id or create a free apple id  we clicked create a free apple id....then comes up with bday,1st name last name, use your current email address, get a free icloud email address or change email address and THIS is where we have problems....if we hit change email address it means that sis's stuff goes under his name and moves all her stuff to this older ipod which the brother does not want. sorry this is so long but its the only way I knew to do it.

  • I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    Hello farahani hairon nizar,
    If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information. 
    If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/en-us/HT203828
    Regards,
    -Norm G.  

  • I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continues to blink on and off. I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated

    I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continue to blink on and off.
    I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated.

    are you backing up files, or doing a Time machine backup, either way, the Time machine will STOP when finished and show "last backup at XXXXXX"  meaning its done...... OR if when transferring files, it will show a progress bar on your desktop and vanish when files are copied.
    Open up the Hitachi drive (your G drive is made by Hitachi, and the best made by the way).....and see if the files are there.
    a MORE VISUAL way is to open the hard drive file, and drag and drop files INTO the Gdrive and you can see them visually be copied there as you do it.
    To see your HD on your desktop GOTO  FINDER......PREFERENCES....then GENERAL TAB.........check the box marked HARD DRIVES.........then your Gdrive will appear on your desktop........open it from there,  and DRAG and drop files from anywhere INTO the Gdrive....... easy visual way to see the files being copied into the Gdrive.

  • My firefox has stopped working with my comcast email. It is loading fine on safari but it is no longer loading my email in a timely manner. Comcast says it is a firefox problem. They suggest I uninstall and reinstall firefox. Do I just drag everything to

    My firefox has stopped working with my comcast email. It is loading fine on safari but it is no longer loading my email in a timely manner on firefox. Comcast says it is a firefox problem. They suggest I uninstall and reinstall firefox. Do I just drag everything to the trash and download a new version? in English
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_4_11; en) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites that cause problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • I can receive email, but can't reply or compose email. Won't accept applet or HTML. ISP Cox says it's a Safari problem. My software is all up to date.

    I can receive email, but can't reply or compose email. Won't accept applet or HTML. ISP Cox says it's a Safari problem. My software is all up to date.

    Which email client is this?
    In Safari / Preferences - Security. Make sure Java is enabled.

  • I cannot print ANYTHING frmo the internet/email at all; only from Word. Comcast & Kodak say it's a FireFox problem. All the letters are little square ones with 1 to 2 spaces in between each word.

    I cannot print ANYTHING from email or internet at all; only from Word. Comcast and Kodak says it's a FireFox problem. I have work to print and cannot. All the letters are little square ones with 1 to 2 spaces in between each word.

    Caused by a Bug in Firefox 4.0b12. It was fixed on Monday in the 4.0b13 pre "tester" nightly's. The fix will be in the 4.0 Release Candidate.

  • Trying to connect to PhoneGap Build Service in Dreamweaver CS6 but get a "Temporary Server related error". Help!

    I am trying to connect to the PhoneGap Build Service in Dreamweaver CS6 but after about a minute I receive the error "Temporary Server related error. Please try again later.". I have googled, searched and implemented any fix that I could find without any joy. I have fully updated Dreamweaver and all other Cloud services but still am receiving the error.
    I can log into build.phonegap.com using my Adobe ID no problem and I have linked a GitHub account to my Adobe ID so I am at a loss as what I can try next.
    Any help would be much appreciated.
    Many thanks,
    Dan

    You will likely get better program help in a program forum Dreamweaver support forum
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Trying to connect my iPhone6 with my old iMac with 10.6.8 MacOS. It says I need a new version of iTunes. When I try to upgrade the iTunes (11.3.1), it says, it is already the latest version. What do I do now?

    Trying to connect my iPhone6 to my old iMac with 10.6.8 MacOS, and synch up the music. It says I need a new version of iTunes. When I try to upgrade the iTunes on my iMac, it says, it is already the latest version. What do I do now?

    The current version of iTunes is 12.x.x and requires OS X later than Snow Leopard.

  • TS2976 i am trying to set up two email accounts for outlook, one for me and one for my husband.  Does anyone know how to do this?

    I am trying to set up icloud emails on outlook 2010.  It only lets me add 1 email rather than two.  One is for me and one for my husband.

    Maybe you should ask on a Microsoft forum rather than one dedicated to the using the iPhone in an enterprise environment.

  • TS3899 getting an error, "unable to connect to server" when trying to access his yahoo email account. no different user name/wifi is off.

    getting an error, "unable to connect to server" when trying to access yahoo email account.  I did not change my password, but now everytime I try to access my email from my IPhone 4s, I get the error.

    Try the Yahoo mail app.

Maybe you are looking for