In which table system change options are set

In which table system change options are set(from transaction se03). I have table logging on but do not know in which table I should look for changes.

Joe,
Below link & sap notes may be useful.
http://www.saptechies.com/how-to-activate-the-img-change-log/
388691 Cross client customization, system change options
184586 - System change option and BW
Thanks
Sushil

Similar Messages

What is System Change Option Used For?

Hi,
I need help on security.
we use scc4 settings for client protection. the settings are 'No changes allowed' for client-specific objects and 'No Changes to Repository and cross-client customizing objects' for cross-client object changes.
system change options are set to 'Modifiable'. what is the difference between these settings? Is there any situation that may cause problems?
thanks,
- ferudun

Hi ,
      No Changes allowed flag is explained as below
This flag means that changes in the customizing settings of the client
are not permitted (client lock).
However, customizing settings can be exported from the client by manual
creation of a transport request. A manual transport can be carried out
in the particular transaction for settings with the function Transport,
which places the selected customizing settings in a transport request.
In a productive client, the customizing settings that can be maintained
as "current settings" are excluded from the client lock; this means that
current settings (e.g. exchange rates, posting periods) can always be
maintained in the productive client
For 'No changes to Repository and cross cleint customizing objects' explained below
   o   Changes to the Repository and cross-client Customizing permitted
       There are no restrictions on the maintenance of cross-client object
       for the client when this setting is used. Both cross-client
       Customizing objects and objects of the SAP Repository can be
       maintained.
   o   No change to cross-client Customizing objects
       Cross-client Customizing objects cannot be maintained in the client
       with this setting.
   o   No change to Repository objects
       With this setting, objects of the SAP Repository cannot be
       maintained in the client.
   o   No change to Repository and cross-client Customizing objects
         Combination of both restrictions: Neither cross-client Customizing
objects nor objects of the SAP Repository can be maintained in the
client.
Please reward if useful.

Personalization - which System Change Option is needed?

Hi Friends,
Personalization does not work in Cosolidation or Productive System due to System Change options. SAP Help states, System change options need to be activated... but which one is is? There are lots of them and we usually are very restrictive with System Change options.
Please help!
Angelika

In SE03, administration-->setsystemchange option
Right click and find the documentation available:
Description
Use this program to set the system change option.
Use the global setting to specify whether Repository objects and cross-client Customizing are modifiable or not.
To make cross-client Customizing objects modifiable, you need to allow changes in the global setting and the Client Setting.
There is also another option for Repository objects: Each Repository object is in a namespace or name range, and in a software component.
So that a Repository object can be changed, you need to set the following to Modifiable:
the global setting
the namespace or name range
the software component of the object
You can set the software component so that the Repository objects are Modifiable, have Restricted modifiability or are Not modifiable. Restricted modifiability means that you can create Repository objects in this software component as non-original objects only.
You can set the namespace or name range so that its Repository objects are modifiable or not modifiable.
Requirements
You need the administration authorization for the Change and Transport Organizer to execute this report program.
Output
All software components and namespaces/name ranges are displayed. You can then make your changes to them.
Example
Notes
The SAP System logs this activity. To display the log of the system change option settings, choose Log.
The way the system change option is set has no effect on client-specific Customizing changes. The Client Control Setting determines whether you can change client-specific Customizing or not.
To set those namespaces for which you have the producer role to Modifiable, choose Edit -> Own namespaces modifiable. These include your own prefix namespaces, if you have applied for any from SAP. For more information on using prefix namespaces, see Help -> SAP Library -> BC - Basis Components -> Change and Transport System -> Namespaces and Naming Conventions -> Development in Reserved Namespaces.
Hope this helps

SE03 Set system change option ?

What is the meaning for SE03? Why would I set anything to motmodifiable in DEV.
I would think Software comp and namespace should all be modifiable in my Developemnt environment.
Does anyone have some information that describes what this actually does or any pros and cons with setting options on the SW components and namespaces.
Thanks
Weyland Y.

Hi Weyland,
By understanding the architecture of SAP like, what is a Client , Cross-Client settings and Repositories. You might have an answer, why this system change option is really needed.
refer the link:
http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm.
System change options settings mainly affect repositories & cross client customizing, changing the settings at these level will affect all the clients .
Thanks
Ahamed
Edited by: Ahamed Yasin on Feb 5, 2010 11:38 AM

SE03 / SE06 System Change Option Scope

Hi All,
We are creating a source system from R/3 to BW in some specify step we need to change the System Change Option of the sistem in a particular client (SE06 -> System Change Option -> No Modifiable to Modifiable and Modifiable to No Modifiable).
My question is: This changes are Cross Client?
Or only apply to the specify client where you are logged?
Best Regards,
Erick Ilarraza

On their own, Global and Compenent specific change options are not client dependent as they are not related to the logical system of the ABAP user nor the master and transaction data (tables with field MANDT as key).
Personally, I think of it as a "call stack" of checks on whether and what you can modify. Perhaps "System Change Update-ability" would have been a better label, but that is not good English.
As the stack is released for a user in a client (a logical program system), the system determines what can be updated at different levels of the stack as it unfolds, a bit like a spring. At the top there is SE06. At the bottom of the spring there are individual authority-checks which are system, client, program flow and context, and user access dependent.
Depending on where in the stack you release the spring from and how you got there, your user can update parts of the stack. Often the term "logical systems" is used in connection with the client (SCC4 client), but also many others such as workflow etc.
=> If the user can pass authority-checks for access at the bottom of the stack (S_DEVELOP is the key control here), then they can also change that which the top of the stack was designed to control. If you can debug, then there is nothing which will stand in your way.
> My question is: This changes are Cross Client?
It depends. You still need to control access via authorizations within the client to secure access to the whole system.
Cheers,
Julius

In which table current /and in which table last 5 passwords are stored

Hello
in which table current /and in which table last 5 passwords are stored

hi,
The password may not be changed to any of a useru2019s last x passwords, if the user changes the password himself or herself.
Until SAP NetWeaver 6.40 (inclusive), the password history was fixed to the value 5.
After SAP NetWeaver 6.40, the administrator can set the size of the password history (up to 100 passwords selected by the user).
The administrator can reset a useru2019s password to any initial password, therefore also to one of the last x passwords for this user. This is necessary, since the administrator should not know the passwords of the users. The user is prompted to change the initial password at the first interactive logon.
You can change this with the profile parameter login/password_history_size.
-Gokul

Software components can keep modifiable in bw 3.5 system change options

hello experts,
can we keep software components modifiable in bw 3.5 production in system change option (se06)
it very urgent

Hi
Transaction SE06 - Processing After Installation of the CTO
Transaction SE06 has to be executed once in every newly installed R/3 System. This applies to an R/3 standard installation as well as the installation of a copy of an existing R/3 system.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport Organizer Closing other requests and tasks Setting the system change option
Meaning of the system name The system name (SID) is defined during the installation with R3setup and cannot be changed subsequently.
When you choose names, make sure that there are no naming conflicts with existing systems. Under no circumstances may two systems within an SAP system group have the same name.
The installation type of the R/3 System is specified in the initial screen:
R/3 standard installation
The R/3 System was installed from the SAP CD using R3setup. It is assumed that the system is running on a correct, delivered version of the R/3 System. No adjustments based on corrections or repairs have been made.
If you set up an R/3 System that originated from a database copy using this option, problems could arise when you upgrade or modify objects with the Change and Transport Organizer.
Database copy or database migration
The R/3 System was created on the basis of a copy. R3setup provides utilities to do this. The R/3 System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new R/3 System to the SAP system group, you have to give it a name that has not yet been used in the group.
You should avoid using a previously used system name as this could cause serious complications and may also lead to the loss of information.
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data.

System change option prevents entry in QS41

Respect Guru,
in our production system System change options in
Se06 is set as not modifiable, further client is closed.
Client role set is Production.
We are unable to edit entries in QS41, but we edited enties earlier with the same settings mentioned earlier.
Please help us in this regard.

Thank you Paul,
you are right paul, i did changes as per your suggestion.
Things worked out in Proudction server.
Thanks and regards,
Daya.
Mohan raised this forum for me. Further i am not able to award points for you.
Please suggest

ChaRM:System Change Option

Hi Team,
I have activated CHaRM BC sets and created maintenace project. The mainteanace cycle also created successfully. But in the t.code /tmwflow/cmsconf, in the "System Change Option" tab, no systems are displayed. How to bring the ChaRM client, DEV,QA &PRD systems (satellite systems) in this tab.
Note; I am working in SAP EHP 1 for SAP Solution Manager 7.0, ST: SAPKITL433
Thanks.
PSK
Edited by: psk.psg on Oct 6, 2010 7:46 AM

Hello,
Have you completed the following steps in SOLMAN
1) In SMSY creation of RFC connection to the required systems like for CHARM consider you have 3 systems , Customizingg, testing and prod then you have to create the RFC connection to all the 3 systems for particular client.
2) In SPRO in SOLMAN have you Activate Integration with change request mgt
3) Also I hope you have configured STMS properly and distributed the STMS.
Best Regards
Shishir H D

Although the proper options are set, firefox will not notify me "first" when I shut down firefox with multiple tabs open.

Firefox should warn me before shutting down when I have more than one tab open. Although the proper options are set, it just shuts down. VERY PAINFUL.

Would you check what you have with I've listed in item #31 at
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#tabslost
Whether you do it the old way or the new way you can always pick up your last session from the History menu. So even if choose not to restore you tabs at the end of session or are not asked you still have the option to work from the last session through the History menu.
You can make '''Firefox 8.0''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.

In which table scripts and smartforms are stored

in which tables scripts and smartforms are stored
eg scripts in tadir.

Hi this may be of some help.
SD
SALES ORDER/ENQUIRY/QUOTATION
Output type         : BA00
ScriptForm Name     : RVORDER01
Driver Program Name : RVADOR01
smartform name
DELIVERY NOTE
Output type         : LD00
ScriptForm Name     : RVDELNOTE
Driver Program Name : RVADDN01
smartform name      : LE_SHP_DELNOTE
Smartform Driver Pgm: RLE_DELNOTE
INVOICE
Output type         : RD00
ScriptForm Name     : RVINVOICE01
Driver Program Name : RVADIN01
smartform name      : LB_BIL_INVOICE
Smartform Driver Pgm: RLB_INVOICE
MM
PUCHASE ORDER/RFQ/CONTRACT
Output type         : NEU
ScriptForm Name     : MEDRUCK
Driver Program Name : SAPMF06P
smartform name      : /SMB40/MMPO_L
smartform driver program: /SMB40/FM06P
GOODS RECEIPT
Output type         : WE01
ScriptForm Name     : WESCHEINVERS1
smartform name      : /SMB40/MMGR1_A
smartform driver program: /SMB40/M07DR
GOODS ISSUE
Output type         : WA01
ScriptForm Name     : WA_SCHEINVERS1
smartform name      : /SMB40/MMGI1_A
smartform driver program: /SMB40/M07DR
FI Forms
Account Statement   : F140_ACC_STAT_01
Cheque Printing     : F110_PRENUM_CHEK
Balance Confirmation: F130_confirm_01
Dunning Form:         F150_DUNN_01
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
SMARTFORMS -Driver Program
PO: /SMB40/FM06P
SO: /SMB40/RVADOR01
GR: /SMB40/M07DR
with regards,
Hema Sundara.
pls give points if u find this helpful.

In E-Business Tax - In which table the tax codes are stored?

Hi All,
I am new to Financials. I have a requirement in which I need to list all the TAX CODES pertaining to AP and AR. Kindly let me know in which table the tax codes are stored in E-Business Tax module. Also let me know how the tax is associated with the AP and AR modules. Is there any column in the table to identify whether the tax is for AP or AR?
Regards,
Ahmed.

Hello Ahmed.
I was not aware that you were talking about R12. The information i gave you concerns 11.5.10.2. Anyway, i checked the ETRM's for R12 and checked that the tables also exist in rel 12. This is an excerpt from R12 ETRM:
TABLE: AP.AP_TAX_CODES_ALL
Object Details
Object Name: AP_TAX_CODES_ALL
Object Type: TABLE
Owner: AP
FND Design Data: SQLAP.AP_TAX_CODES_ALL
Subobject Name:
Status: VALID
AP_TAX_CODES_ALL contains information about the tax codes
you define. You need one row for each tax code you
want to use when entering invoices. When you enter
invoices, you can use a list of values to select a tax code
defined in this table. Your Oracle Payables
application also uses TAX_RATE to calculate use tax
when you enter a taxable amount for an invoice.
This table corresponds to the Tax Codes window.
Now you say that you cannot find the information into the tables. Are you working on a production instance. Are you sure that the taxes have already been defined?
Octavio

In which tables deleted schedule lines are stored

Hi All,
I want to know in which tables deleted schedule lines in VA02 VA32 are stored.
How to get the deleted Schedule line item quantity.Please give me reply as early as possible.
Thanks,
Saritha

Hi Saritha,
As my understanding there is no table to store the deleted schedule line data.
You have to identify badi or user-exit before deleting the schedule lines data in the VA02 program and in that exit you have to write the code to populate the deleted schedule line data in to your own custom tables(you have to create custom tables).I have used the same method for deleted deliveries.
In sap CDHDR /CDPOS contains only changed data but not deleted data.
Thanks,
shyla

In which tables Activity Number's are stored

Hello Guru's
when ever we create an activty we will get one number....i want to know in which table the activiity no's are stored.......and also send us the related table names regarding the activities,......
Thanks in advance
Regards
sreeram

Hi,
CRMD_ORDERADM_H
CRMD_ORDERADM_I
CRMD_ACTIVITY_H
CRMD_PARTNER
CRMD_LINK
CRM_JEST
CRMD_SURVEY
CRMD_ORGMAN
CRMV_LINKPARTNER
CRMV_HEADERLINK
CRMV_OBJECT_ID
CRMV_LINKORGMAN
regards, Robert

Which table campaign element details are stored

Hi All,
Would anyone know which table campaign and campaign element details are stored? I am using CRM 2007 and i am looking to find where details such as campaign element ID, campaign element description, start/end date are stored?
i could not fund such data after looking through se16
Any assistance is much appreciated.
Thanks,
Jonathan

Hi,
se16 > CGPL_PROJECT
does not have records for the Campaign Element or Marketing Plan Elemtents,
do you know which table I can find this information in please?
Many thanks
Mrugesh

In which table system change options are set

Similar Messages

Maybe you are looking for