Inbound Delivery Idoc- Create ... help required

Hi,
I'm using DELVRY01 idoc to create deliveries. when i execute using test tool, the idoc gets created with error status 51 with following errors:
Field EXIDV empty
Message no. VL243
Diagnosis
A required field in the intermediate document (IDoc) is not filled. This is the field EXIDV in segment 000042.
Field VHILM empty
Message no. VL243
Diagnosis
A required field in the intermediate document (IDoc) is not filled. This is the field VHILM in segment 000039
But these errors reflect to handling unit from segment E1EDL37 and its sub nodes which are really NOT required in my case.
Now confused if i'm using a wrong reference of creating inbound delivery. Pls shre some thoughts on it on troubleshooting this issue.

Hi Prabhu
these two fields are mandatory .. fill below details
E1EDL37-Handling unit header
EXIDV <XXXXXXXXXXXXX> External Handling Unit Identification
GWEIT <LB> Weight Unit Tare
BRGEW <000XX> Total Weight of Handling Unit
VHILM <Dummy Packing Material> Packaging Materials
E1EDL44-IDoc: Handling Unit Item (Delivery)
VBELN <Delivery nO> Sales and Distribution Document Number
POSNR <900004> Item number of the SD document
EXIDV <XXXXXXXXXXXXX> External Handling Unit Identification
VEMNG <00001> Base Quantity Packed in the Handling Unit Item
Dont forget to create Dummy packing material no...
i think above mapping helps you...
Thanks
Ramesh

Similar Messages

Identification whether inbound delivery is created for a PO or not ?

Is there a way that one can identity whether inbound delivery is created for a given PO or not ?

Dear Eshwar,
There are several ways to check whether Inbound delivery had been created or even completed.
It will also depend on how u configured your system.
1) Also one of the most important would be if you check the delivery tab in a PO there would be delivery complete tab, which would be checked if inbound delivery is created for that PO.
2) Also you can find the delivery details in the Purchase order history
3) The confirmation control tab will have the delivery number which you check with VL33N.
Hope this helps
Thanks
Murtuza

Inspection lot not getting cancelled after the inbound delivery is created

Hello,
The scenraio is like this.
1. Material was procured in plant A.
2. Using the stock transfer purchase order, transferred the material from Plant A to Plant B.
3. Outbound delivery was created, Handling units were assigned and Post Goods issue was done.
4. As soon as this was done, inbound delivery got created automatically in plant B and Handling units were assigned.
5. Inspection lot was created with origin "08".
6. Now I want to reverse all the transactions, so I did as mentioned below.
7. Handling units were deassigned from the inbound delivery and inbound delivery was successfully deleted.
8. Now tried to do the reverse post goods issue and got the error "Handling unit XXXXXX cannot be reversed"..Goods movement cannot be reversed for handling unit XXXXX because it has been changed or assigned to object since the last goods movement posting".
The issue is that as soon as the inbound delivery is deleted, the inspection lot status should change, which has not changed. So kindly let me know how to make the system cancel the inspection lot as soon as the deassignment of handling units is done in inbound delivery or the inbound delievry is deleted.
Regards,
Narendra Bora

Hello,
Can anyone please reply.
Regards,
Narendra Bora

Inbound delivery Idoc to create Batch with Characteristics

Hi Experts,
Need your help...
We have the scenario where the inbound delivery in ECC is created by an external Idoc (DESADV). However the batch field is blank.
Requirement is to create a batch per line item (as per the number range in ECC) during inbound idoc posting and assign the batch to the inbound delivery line item. This batch will also need to be populated with characteristics. (DESADV Idoc segments will carry these characteristics)
Is there a way to achieve this..?
Thanks,
Krishna

Thanks for the reply..
Do you mean to say that its a standard functionality..? We are already using DESADV with DELS. However, we have modified our inbound idoc with Z Segments. These segments carry the characteristic values. No where in the idoc we have the batch number, as we want the batch number to be created automatically based on the number range in ECC.
In such kind of cases, how to achieve this..?
Thanks,
Krishna

Inbound Delivery Idoc

We are trying to create a Inbound Delivery for purchase order. We are using idoc basic type DELVRY03.
When we are processing this Idoc we are constantly getting error :
Item 00000 of purchasing document does not exist
Message no. ME706
Diagnosis
Purchase order 00000 with item was not found.
Procedure
Enter a different purchase order.
We have mapped the PO and PO Item fields to Idoc segment fields E1EDL24-VGBEL and VGPOS respectively.
Let me know if anyone came across or know the reason for this message and remdy.
Thanks in advance.

hi,
below is the structure I had used in my project for creating inbound delivery through ASN
E1EDL20- LIFEX
E1EDT13- QUALF (007)
E1EDT13-NTANF
E1EDL24- POSNR
E1EDL24- KDMAT Should be repeated for multiple Items
E1EDL24- LFIMG
E1EDL24- VRKME
E1EDL41-QUALF(001)
E1EDL41- BSTNR
E1EDL41- POSEX
E1EDL37- EXIDV
E1EDL37- VHILM_KU
here please check the documentation in WE60. hope it helps
regards
Seema

Inbound Delivery Idoc for PO

We are trying to create a Inbound Delivery for purchase order. We are using idoc basic type DELVRY03.
When we are processing this Idoc we are constantly getting error :
Item 00000 of purchasing document does not exist
Message no. ME706
Diagnosis
Purchase order 00000 with item was not found.
Procedure
Enter a different purchase order.
We have mapped the PO and PO Item fields to Idoc segment fields E1EDL24-VGBEL and VGPOS respectively.
Let me know if anyone came across or know the reason for this message and remdy.
Thanks in advance.

Pls check if the GR has already happened manually.
Hope this helps.

SAP Standard INbound Delivery IDOC

Hi All,
Pease let me know the
Messahe type,Process Code and Basic Type, Function Module for Inbound Delivery
as well as which message type do i need to setup in NACR
Regards
Amey

Hello,
there is nothing to maintain in NACR for inbound delivery (MM).
FM creates Inbound delivery via IDOC.
Please refer to help.sap.com [EDI Inbound Processing of a Shipping Notification |http://help.sap.com/erp2005_ehp_05/helpdata/EN/11/dcbd10bd9211d188ef0000e8216438/content.htm]
Andrzej

LS System for Inbound delivery idoc

Hi,
I am able to define transfer the master data between ECC and EWM system, however i have an issue for transactional data e.g. inbound delivery.
When I create inbound delivery then system generates an IDOC but it picks up a different logical system as against the one defined for my system. When I generated my distribution model, i got a message that it is successfully created and I can see my message type and filter details(my warehouse etc) on the message type.
Can someone kindly suggest how EWM picks up LOgical system, my understanding is that it is based ont he configurtion(WM to EWM location definition and distribution model). But I am confused now and trying to understand why system is not finding my LS system?
Any link to supporting documentation would really help.
Thanks and regards,
Bhaskar

I found the root cause, there was another LS system model was there in my system, I regenerated partner profiles and that resolved the issue.

No inbound delivery/TO created for goods receipt into a Lean WM Storage Loc

Ladies and Gentlemen:
We are using SAP 46C with Support pack 45. We have quite a few storage locations that are Lean WM managed. The Storage locations are not HU Managed. However everytime run a MB1C or MIGO 501, SAP is receiving the materials directly via a material document. I was under the impression that any time a storage location is either WM, Lean WM or HU managed, SAP always creates an inbound delivery and in case of Lean WM/WM a transfer order to receive the material. Please tell me what am I missing.
I have created plant, storage location and assigned the combination a lean Warehouse.
I have done the configuration under:
Customizing> Logistics Execution> Shipping--> Lean WM.
Please help me with why my system is not creating inbound deliveries.
Thanks.

hi
i am not 100% percent but I do not think that you can have inbound deliveries in to a lean wm environment. Inbound deliveries need to be pout away and as there are no bins etc in lean wm there is no put away to be done. If you want Inbound deliveries etc you are talking about full WM

Inbound delivery idoc error in segment e1eld20

we are receiving delivery idoc from the vendor, so this is delivery will be created as inbound delivery in our system, so in the segment E1EDL20 field VBELN(let say 'ABCD') is the outbound delivery number of the vendor ( i believe), but when is try to process this idoc it gives the error as 'delivery ABCD does not exist' ( it's obvious that the delivery 'ABCD' will not be in our system because it's a vendor delivery number), can some body please let me know whats wrong with this E1EDL20-VBELN.
Thanks,
Kashif

HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

Inbound Delivery Idoc processing for Purchase Order

We are trying to create a Inbound Delivery for purchase order. We are using idoc basic type DELVRY03.
When we are processing this Idoc we are constantly getting error :
Item 00000 of purchasing document does not exist
Message no. ME706
Diagnosis
Purchase order 00000 with item was not found.
Procedure
Enter a different purchase order.
We have mapped the PO and PO Item fields to Idoc segment fields E1EDL24-VGBEL and VGPOS respectively.
Let me know if anyone came across or know the reason for this message and remdy.
Thanks in advance.

Hi Milind,
Did you get this to work?
Thanks,
Finbarr

GR against Inbound Delivery (IDoc)

Hi All,
I am trying to post Goods Receipt against Inbound Delivery. What is the IDoc/Message Type I need to use for this and what segments I should populate?
So far I have tried using...
MBGMCR02 - has serial numbers (errors out with a short dump and says "Cannot be processed with this transaction." Application VL and message Number 143. I don't know how to proceed further
and SHP_IBDLV_CONFIRM_DECENTRAL01(this does not have serial numbers). IDoc was processed, but I am not sure what it updated. When I looked at the PO History it did not have a record for GR Inbound Delivery like you would see when you do the GR for Inbound delivery using MIGO.
Any help would be appreciated.
Thanks,
Sneha

See the below link :
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
Reward Points if it is helpful
Thanks
Seshu

Mandatory fields for inbound delivery idocs

hi all
i want to generate inbound idocs for inbound delivery ASN
i am using message type DESADV and idoc type /AFS/DELVRY03
in order to generate inbound idoc what are mandatory values i have to pass to the idocs
thanks
Anil

HI,
I created inbound idoc for ASN Inbound delivery in test mode we19
i got idoc with status 62, when i am trying to process the idoc in bd87, its allowing me
is there any other way to process the idocs , so that status will be 53
thanks

Inbound ORDERS05 IDoc - Create SD Sales Order (EDI)

I having an issue in inbound ORDERS05 IDoc processing to create SD sales order where the sales unit of measure for the material is getting lost/replaced. We are sending sales unit of measure in the E1EDP01-MENEE field, we are also sending the material UPC in teh E1EDP19 (003) segment relying on UPC material determination rules to resolve the material for the sales order. During this process of material determination the sales unit of measure is getting lost/replaced. I know as if we send the actual SAP material in the E1EDP19 segment (no material determination required) the sales unit of measure is unchanged. In this SAP system multiple sales unit of measure are maintained for each individual UPC code. Just looking for input on where to look to resolve this, config, user exits, etc..

I can't say for sure what you should be doing, as I don't know how you have setup your material master, or how your Customers order. We have some Customers that always want EAches, some that always want OUTers, then some who want whatever UOM is assigned to the GTIN (UPC) that they order, which could be one of several. We have our custom code in ZXVEDU03.
Cheers, Paul.

Inbound Delivery Idoc not update PIC and PGI with split batch.

Dear Experts,
Delivery outbound with split batch send to third party Warehouse to PIC and PGI from SAP, then receive the delivery inbound IDOC to update the PIC and PGI in SAP from third party. Basic Idoc DELIVERY03 it's works fine with out split batch, with split batch it's not updating PIC and PGI at the same time no error. Please advice on this
E1EDL24-HIPOS = "HIGHER LEVEL ITEM NUMEBR"
E1EDL24-HIEVW = "VALUE 1"
E1EDL19-QALF = "BAS"
Thanks and Regards,
Thiru.

Hi,
You also have to create a segment with following data as well (for batches).
E1EDL19-QUALF = "QUA".
Cheers,

Inbound Delivery Idoc- Create ... help required

Similar Messages

Maybe you are looking for