Including initial data in an app.

So I'm writing an app to do some nuclear physics calculations, and I need it to have a rather large table of data available to it when it starts up. I'd also like the user to be able to revise this table, but always be able to 'revert to factory settings' so to speak, and get back the original values, regardless of what changes they may have made.
My question is this: What is the preferred way to do this? I can imagine hard coding the values in as part of a class, or storing the values in a file, then reading them every time the program starts, etc. What's the general consensus on what's 'right'?
Thanks,
Paul

Store the data in a separate file. Then, initialize your user preferences from that file.

Similar Messages

How to transfer game app including its data from an ipad to another?

how to transfer game app including its data from an ipad to another?

Do both iPads use the same Apple ID?
How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
How to Transfer App Data and Game Saves from One iOS Device to Another
http://lifehacker.com/5891964/can-i-transfer-app-data-and-game-saves-from-my-iph one-to-a-new-ipad
How to transfer data from your old iPad to your new iPad
http://www.imore.com/how-transfer-data-your-old-ipad-your-new-ipad-air-or-retina -ipad-mini
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
 Cheers, Tom

IPhone 4, iOS7, cellular data control by app doesn't include all apps

Settings | Cellular | Use Cellular Data for: [app list]
The ability to control which apps cannot use cellular data is really helpful, but on my iPhone 4, certain apps aren't appearing in the list, for example, YouTube and Instagram. I need to figure out how to turn off the cellular data for the apps missing from the list.
I did compare this to another iPhone 4, and an iPhone5 - the other 4 had the issue, but on the 5, all the apps were listed.

i'm guessing you used more than one iTunes store account to purchase content.
if that's the case, try authorizing your Mac to play/use the content purchased from the other iTS account(s).
that's basically very easy. all you have to do is +log out+ of one account (click on the account name in the Store window and select +sign out+ from the pop-up dialog) and into the other, and then they will both be authorized. when done, sign back into your usual account. you'll have to do that one time only.
JGG

I have just purchased a new ipad2 to replace my old ipad. How do i sync all the data in my apps I am worried about losing my data?

I have just purchased a new ipad2 to replace my old ipad. How do i sync all the data in my apps I am worried about losing my data?

iPad settings and data created and stored by a 3rd party party app along with app settings are included with the iPad's backup along with other data.
If you are syncing your iPad direct with iTunes on your computer via USB, the iPad's backup is updated as the first step during the iTunes sync process.
The first time you connect a new iPad or iOS device to iTunes that is used to sync with another iOS device, you are prompted to transfer the backup for the other iOS device to the new device. This is followed by a sync to transfer the same content from your computer that is on the old iPad to the new iPad such as music, movies, tv shows, 3rd party apps, photos, audio and print books, etc.

Sending PO data from Oracle APPS 11i to another Oracle APPS 11i

I am trying to send the XML message (Purchase Order Data) from the Oracle APPS 11i to the other Oracle APPS 11i using XML Gateway and the AQ Adaptors in both outbound and inbound. I have created the Receive Activity for Outbound AQ Adaptor and the Invoke Activity for the Inbound AQ Adaptor and the Assign Activity in the middle to assign the variables for both Receive and Invoke Acvities.
I have created a partner link using AQ adapter to Dequeuing the data from Oracle APPS 11i that generated by XML Gateway and also have created a partner link using AQ adapter to Enqueuing the data.
When I run, it gives me an error on the Enqueuing side with the followings:
[2006/04/04 10:03:57] New instance of BPEL process "XML2APPS" initiated (# "18").
<process>
<sequence>
AQ_Receive
[2006/04/04 10:03:57] Received "Receive_Dequeue_InputVariable" call from partner "PO_IN_QUEUE" More...
<Receive_Dequeue_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ReceiveDocument">
<PROCESS_PO_007>
<CNTROLAREA>
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="PO">PO</NOUN>
<REVISION value="007">007</REVISION>
</BSR>
<SENDER>
<LOGICALID>ORACLE</LOGICALID>
<COMPONENT>PURCHASING</COMPONENT>
<TASK>POISSUE</TASK>
<REFERENCEID>VIS.US.ORACLE.COM:oracle.apps.po.event.xmlpo:32570-148852</REFERENCEID>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>US</LANGUAGE>
<CODEPAGE>UTF8</CODEPAGE>
<AUTHID>APPS</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>02</MINUTE>
<SECOND>29</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
</CNTROLAREA>
<DATAAREA>
<PROCESS_PO>
<POORDERHDR>
<DATETIME qualifier="DOCUMENT" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>00</MINUTE>
<SECOND>45</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="EXTENDED" type="T">
<VALUE>267</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM />
</OPERAMT>
<POID>4484</POID>
<POTYPE>STANDARD</POTYPE>
<ACKREQUEST>N</ACKREQUEST>
<CONTRACTB />
<CONTRACTS />
<DESCRIPTN />
<PORELEASE />
<USERAREA>
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<FOB>
<DESCRIPTN>Vendor's responsibility ceases upon transfer to carrier</DESCRIPTN>
<TERMID>Origin</TERMID>
</FOB>
<TANDC />
<FTTERM>
<DESCRIPTN>No Freight Charge</DESCRIPTN>
<TERMID>NONE</TERMID>
</FTTERM>
<EXCHRATE />
<DATETIME qualifier="EXCHRATEDATE">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="APPREQ" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<CONFIRM>N</CONFIRM>
<SHIPPINGCONTROL />
<DFFPOHEADER>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFPOHEADER>
<PCARDHDR>
<MEMBERNAME />
<PCARDNUM />
<DATETIME qualifier="EXPIRATION">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<PCARDBRAND />
</PCARDHDR>
</USERAREA>
<PARTNER>
<NAME index="1">Nate OD88/VIS2 Supplier TEST</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>20027</PARTNRID>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX>1923</PARTNRIDX>
<TAXID />
<TERMID />
<USERAREA>
<DFFVENDOR>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDOR>
<CUSTOMERNUM />
</USERAREA>
<ADDRESS>
<ADDRLINE index="1">VIS2 address</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN>VIS2/OD88 SITE</DESCRIPTN>
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA>
<DFFVENDORSITE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDORSITE>
</USERAREA>
</ADDRESS>
<CONTACT>
<NAME index="1" />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1">-</TELEPHONE>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>SoldTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TAXID />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1">Ross, Nate</NAME>
<CONTCTTYPE />
<DESCRIPTN />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
<USERAREA />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>BillTo</PARTNRTYPE>
<CURRENCY />
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
</PARTNER>
<PARTNER>
<NAME index="1">UPS</NAME>
<ONETIME>0</ONETIME>
<PARTNRID />
<PARTNRTYPE>Carrier</PARTNRTYPE>
<PARTNRIDX>UPS</PARTNRIDX>
</PARTNER>
<POTERM>
<DESCRIPTN>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</DESCRIPTN>
<TERMID>45 Net (terms date + 45)</TERMID>
<DAYSNUM />
<QUANTITY qualifier="PERCENT">
<VALUE />
<NUMOFDEC />
<SIGN />
<UOM />
</QUANTITY>
<USERAREA />
</POTERM>
</POORDERHDR>
<POORDERLIN>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>89</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM>QT</UOM>
</OPERAMT>
<POLINENUM>1</POLINENUM>
<HAZRDMATL />
<ITEMRV>0</ITEMRV>
<ITEMRVX />
<POLNSTATUS />
<DESCRIPTN>10-40W Car / Truck Motor Oil</DESCRIPTN>
<ITEM>10-40W Oil</ITEM>
<ITEMX />
<USERAREA>
<REQUESTOR />
<CATEGORYID>MISC.MISC</CATEGORYID>
<CONTRACTNUM />
<CONTRACTPONUM />
<CONTRACTPOLINENUM />
<VENDORQUOTENUM />
<CONFIGID />
<LISTPRICE>.89</LISTPRICE>
<MARKETPRICE />
<PRICENOTTOEXCEED />
<NEGPRICE>N</NEGPRICE>
<TAXABLE>N</TAXABLE>
<TXNREASONCODE />
<TYPE1099 />
<LINEORDERTYPE>Goods</LINEORDERTYPE>
<HAZRDUNNUM />
<HAZRDUNDESC />
<DFFLINE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFLINE>
<DFFITEM>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10>Y</ATTRIBUTE10>
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFITEM>
<KFFITEM>
<ATTRIBUTE1>MISC</ATTRIBUTE1>
<ATTRIBUTE2>MISC</ATTRIBUTE2>
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
<ATTRIBUTE17 />
<ATTRIBUTE18 />
<ATTRIBUTE19 />
<ATTRIBUTE20 />
</KFFITEM>
<GLOBALCONTRACT />
<GLOBALCONTRACTLIN />
<JOBTITLE />
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
<CONTRACTORFIRSTNAME />
<CONTRACTORLASTNAME />
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
</USERAREA>
<POLINESCHD>
<DATETIME qualifier="NEEDDELV" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<DESCRIPTN />
<PSCLINENUM>1</PSCLINENUM>
<USERAREA>
<DATETIME qualifier="PROMSHIP">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<DATETIME qualifier="APPROVAL">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>08</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>.89</VALUE>
<NUMOFDEC />
<SIGN />
<CURRENCY>USD</CURRENCY>
<UOMVALUE />
<UOMNUMDEC />
<UOM />
</OPERAMT>
<PRICEOVRRD />
<TAXABLE>N</TAXABLE>
<TAXCODE />
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>ShipTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY />
<COUNTRY />
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN />
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1" />
<ONETIME />
<PARTNRID />
<PARTNRTYPE />
<PARTNRIDX />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRTYPE />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<DROPSHIPDETAILS>
<DROPSHIPMENT />
<DROPSHIPCUSTNAME />
<SHIPINSTR />
<PACKINSTR />
<SHIPMETHOD />
<CUSTOMERPONUM />
<CUSTOMERLINENUM />
<CUSTOMERSHIPNUM />
<CUSTOMERDESC />
</DROPSHIPDETAILS>
<CONSIGNEDINV>N</CONSIGNEDINV>
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
</USERAREA>
</POLINESCHD>
</POORDERLIN>
</PROCESS_PO>
</DATAAREA>
</PROCESS_PO_007>
</part>
</Receive_Dequeue_InputVariable>
Assign_Input2Output
[2006/04/04 10:03:57] Updated variable "Invoke_Enqueue_InputVariable" More...
<Invoke_Enqueue_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ReceiveDocument">
<ReceiveDocument xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<CNTROLAREA xmlns="">
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="PO">PO</NOUN>
<REVISION value="007">007</REVISION>
</BSR>
<SENDER>
<LOGICALID>ORACLE</LOGICALID>
<COMPONENT>PURCHASING</COMPONENT>
<TASK>POISSUE</TASK>
<REFERENCEID>VIS.US.ORACLE.COM:oracle.apps.po.event.xmlpo:32570-148852</REFERENCEID>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>US</LANGUAGE>
<CODEPAGE>UTF8</CODEPAGE>
<AUTHID>APPS</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>02</MINUTE>
<SECOND>29</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
<PROCESS_PO>
<POORDERHDR>
<DATETIME qualifier="DOCUMENT" type="T" index="1">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>13</HOUR>
<MINUTE>00</MINUTE>
<SECOND>45</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="EXTENDED" type="T">
<VALUE>267</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM />
</OPERAMT>
<POID>4484</POID>
<POTYPE>STANDARD</POTYPE>
<ACKREQUEST>N</ACKREQUEST>
<CONTRACTB />
<CONTRACTS />
<DESCRIPTN />
<PORELEASE />
<USERAREA>
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<FOB>
<DESCRIPTN>Vendor's responsibility ceases upon transfer to carrier</DESCRIPTN>
<TERMID>Origin</TERMID>
</FOB>
<TANDC />
<FTTERM>
<DESCRIPTN>No Freight Charge</DESCRIPTN>
<TERMID>NONE</TERMID>
</FTTERM>
<EXCHRATE />
<DATETIME qualifier="EXCHRATEDATE">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="APPREQ" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<CONFIRM>N</CONFIRM>
<SHIPPINGCONTROL />
<DFFPOHEADER>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFPOHEADER>
<PCARDHDR>
<MEMBERNAME />
<PCARDNUM />
<DATETIME qualifier="EXPIRATION">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<PCARDBRAND />
</PCARDHDR>
</USERAREA>
<PARTNER>
<NAME index="1">Nate OD88/VIS2 Supplier TEST</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>20027</PARTNRID>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX>1923</PARTNRIDX>
<TAXID />
<TERMID />
<USERAREA>
<DFFVENDOR>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDOR>
<CUSTOMERNUM />
</USERAREA>
<ADDRESS>
<ADDRLINE index="1">VIS2 address</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN>VIS2/OD88 SITE</DESCRIPTN>
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA>
<DFFVENDORSITE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFVENDORSITE>
</USERAREA>
</ADDRESS>
<CONTACT>
<NAME index="1" />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1">-</TELEPHONE>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>SoldTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TAXID />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1">Ross, Nate</NAME>
<CONTCTTYPE />
<DESCRIPTN />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
<USERAREA />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>BillTo</PARTNRTYPE>
<CURRENCY />
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1">222 Oracle Way</ADDRLINE>
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY>Reston</CITY>
<COUNTRY>US</COUNTRY>
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE>20190</POSTALCODE>
<REGION />
<STATEPROVN>VA</STATEPROVN>
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
</PARTNER>
<PARTNER>
<NAME index="1">UPS</NAME>
<ONETIME>0</ONETIME>
<PARTNRID />
<PARTNRTYPE>Carrier</PARTNRTYPE>
<PARTNRIDX>UPS</PARTNRIDX>
</PARTNER>
<POTERM>
<DESCRIPTN>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</DESCRIPTN>
<TERMID>45 Net (terms date + 45)</TERMID>
<DAYSNUM />
<QUANTITY qualifier="PERCENT">
<VALUE />
<NUMOFDEC />
<SIGN />
<UOM />
</QUANTITY>
<USERAREA />
</POTERM>
</POORDERHDR>
<POORDERLIN>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>89</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM>QT</UOM>
</OPERAMT>
<POLINENUM>1</POLINENUM>
<HAZRDMATL />
<ITEMRV>0</ITEMRV>
<ITEMRVX />
<POLNSTATUS />
<DESCRIPTN>10-40W Car / Truck Motor Oil</DESCRIPTN>
<ITEM>10-40W Oil</ITEM>
<ITEMX />
<USERAREA>
<REQUESTOR />
<CATEGORYID>MISC.MISC</CATEGORYID>
<CONTRACTNUM />
<CONTRACTPONUM />
<CONTRACTPOLINENUM />
<VENDORQUOTENUM />
<CONFIGID />
<LISTPRICE>.89</LISTPRICE>
<MARKETPRICE />
<PRICENOTTOEXCEED />
<NEGPRICE>N</NEGPRICE>
<TAXABLE>N</TAXABLE>
<TXNREASONCODE />
<TYPE1099 />
<LINEORDERTYPE>Goods</LINEORDERTYPE>
<HAZRDUNNUM />
<HAZRDUNDESC />
<DFFLINE>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFLINE>
<DFFITEM>
<ATTRIBUTE1 />
<ATTRIBUTE2 />
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10>Y</ATTRIBUTE10>
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
</DFFITEM>
<KFFITEM>
<ATTRIBUTE1>MISC</ATTRIBUTE1>
<ATTRIBUTE2>MISC</ATTRIBUTE2>
<ATTRIBUTE3 />
<ATTRIBUTE4 />
<ATTRIBUTE5 />
<ATTRIBUTE6 />
<ATTRIBUTE7 />
<ATTRIBUTE8 />
<ATTRIBUTE9 />
<ATTRIBUTE10 />
<ATTRIBUTE11 />
<ATTRIBUTE12 />
<ATTRIBUTE13 />
<ATTRIBUTE14 />
<ATTRIBUTE15 />
<ATTRIBUTE16 />
<ATTRIBUTE17 />
<ATTRIBUTE18 />
<ATTRIBUTE19 />
<ATTRIBUTE20 />
</KFFITEM>
<GLOBALCONTRACT />
<GLOBALCONTRACTLIN />
<JOBTITLE />
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
<CONTRACTORFIRSTNAME />
<CONTRACTORLASTNAME />
<DATETIME qualifier="ACTSTART" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<DATETIME qualifier="ACTEND" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
</USERAREA>
<POLINESCHD>
<DATETIME qualifier="NEEDDELV" type="T" index="1">
<YEAR />
<MONTH />
<DAY />
<HOUR />
<MINUTE />
<SECOND />
<SUBSECOND />
<TIMEZONE />
</DATETIME>
<QUANTITY qualifier="ORDERED">
<VALUE>3</VALUE>
<NUMOFDEC />
<SIGN>+</SIGN>
<UOM>QT</UOM>
</QUANTITY>
<DESCRIPTN />
<PSCLINENUM>1</PSCLINENUM>
<USERAREA>
<DATETIME qualifier="PROMSHIP">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>03</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<DATETIME qualifier="APPROVAL">
<YEAR>2006</YEAR>
<MONTH>04</MONTH>
<DAY>08</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>+0000</TIMEZONE>
</DATETIME>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>.89</VALUE>
<NUMOFDEC />
<SIGN />
<CURRENCY>USD</CURRENCY>
<UOMVALUE />
<UOMNUMDEC />
<UOM />
</OPERAMT>
<PRICEOVRRD />
<TAXABLE>N</TAXABLE>
<TAXCODE />
<PARTNER>
<NAME index="1">Vision Operations</NAME>
<ONETIME>0</ONETIME>
<PARTNRID>204</PARTNRID>
<PARTNRTYPE>ShipTo</PARTNRTYPE>
<CURRENCY>USD</CURRENCY>
<DUNSNUMBER />
<PARTNRIDX />
<PAYMETHOD />
<TERMID />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRLINE index="3" />
<ADDRTYPE />
<CITY />
<COUNTRY />
<COUNTY />
<DESCRIPTN />
<FAX index="1" />
<POSTALCODE />
<REGION />
<STATEPROVN />
<TAXJRSDCTN />
<TELEPHONE index="1" />
<TELEPHONE index="2" />
<TELEPHONE index="3" />
<URL />
<USERAREA />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1" />
<ONETIME />
<PARTNRID />
<PARTNRTYPE />
<PARTNRIDX />
<USERAREA />
<ADDRESS>
<ADDRLINE index="1" />
<ADDRLINE index="2" />
<ADDRTYPE />
</ADDRESS>
<CONTACT>
<NAME index="1" />
<CONTCTTYPE />
<EMAIL />
<FAX index="1" />
<TELEPHONE index="1" />
</CONTACT>
</PARTNER>
<DROPSHIPDETAILS>
<DROPSHIPMENT />
<DROPSHIPCUSTNAME />
<SHIPINSTR />
<PACKINSTR />
<SHIPMETHOD />
<CUSTOMERPONUM />
<CUSTOMERLINENUM />
<CUSTOMERSHIPNUM />
<CUSTOMERDESC />
</DROPSHIPDETAILS>
<CONSIGNEDINV>N</CONSIGNEDINV>
<AMOUNT qualifier="TOTAL" type="T">
<VALUE />
<NUMOFDEC />
<SIGN />
<CURRENCY />
<DRCR>C</DRCR>
</AMOUNT>
</USERAREA>
</POLINESCHD>
</POORDERLIN>
</PROCESS_PO>
</DATAAREA>
</ReceiveDocument>
</part>
</Invoke_Enqueue_InputVariable>
Invoke_QUEUE (faulted)
[2006/04/04 10:03:59] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/d01/oraAS/integration/orabpel/domains/default/tmp/.bpel_XML2APPS_1.0.jar/CreatePO.wsdl [ Enqueue_ptt::Enqueue(ReceiveDocument) ] - WSIF JCA Execute of operation 'Enqueue' failed due to: Enqueue failed. Enqueue failed. ; nested exception is: ORABPEL-11947 Enqueue failed. Enqueue failed. Please examine the log file to determine the problem.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</remoteFault>
WS-T Complete
WS-T Close
WS-T Fault
WS-T Cancel
WS-T Compensate
</sequence>
[2006/04/04 10:03:59] "BPELFault" has not been caught by a catch block.
[2006/04/04 10:03:59] BPEL process instance "18" cancelled
WS-T Complete
WS-T Close
WS-T Fault
WS-T Cancel
WS-T Compensate
</process>
Does anyone know where I can get help on an error message ORABPEL-11947? I looked everywhere but no success.
Can someone help me on this?
Thanks in advance,
Sook

You have to integrate apps with BPEL using apps adapter and then from BPEL pass the message to Oracle B2B 11g -
Oracle B2B 11g <---> Oracle BPEL 11g <--- Oracle Apps Adapter --> Oracle Apps
As BPEL and B2B both are part of SOA suite 11g hence there is no additional cost and performance remain better.
Preffered mode of integration would be through XML gateway.
I could see that 856 outbound EDI map is available from Oracle but not the XML gateway map. If i have to use XML gateway then how i can create the XML gateway map.You may raise your question in apps forum -
http://forums.oracle.com/forums/category.jspa?categoryID=108
If you don't get any help there, raise a case with support.
Regards,
Anuj
Edited by: Anuj Dwivedi on Oct 12, 2010 11:58 AM

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Can i recover data from an app to my new iphone ? (Sleep talk recordings)

Love the sleep talk app and i have some old recordigs i would like to recover. As they are not included when i synced the app to my new 4S, the only thing i can think of is restoring everything from my old iphone by syncing the old backup stored in itunes.
But i dont feel like doing that and i still dont know if that will me all the previous data and not just the apps themselves...

App data is part of the icloud and itunes backup. Backup your daughters phone.
I don't think you can save it to your phone, unless the movie app states that you can. Look at their support site.

Unable to turn cellular data on for apps

I'm running a 32GB iPhone 5C on 7.1.2 on Verizon.
before the last update I had gone over on my data allotment and then went into the cellular data settings and turned off the cellular data for almost every app I could. Some of these included the music app, podcast app, angry birds, google drive and documents, and just any app that I don't need sucking off my cellular data allotment.
well the 7.1.2 software update changed the settings (I don't know why Apple changes these things when there's no reason to, it's getting frustrating having to learn how to use my phone after each update) and you can no longer go into cellular data and flip the switch for all the apps on one single page. So now I have apps like the Podcasts and Google Apps that I open, am alerted the cellular data is turned off for them but when I click settings (the other option is just a confirmation of the message receipt) it takes me to a section in the settings that is no longer listing all my apps with the cellular data switch.
so my problem is that I've turned off cellular data, updated
software that for no reason neutered my ability to turn it on/off for individual apps, with no way to turn the cellular data back on for those apps. I can't imagine why Apple would do this, unless app developers were complaining to Apple that people were
turning cellular data off to avoid advertisements.
I have reset network settings, scoured the settings menu for options, tried most things suggested for other problems and still nothing. And I'm not going to reset my phone because as soon as I load my backup I'll be in the same boat. Oh I've also tried uninstalling and redownloading the apps as well.
and on a side note whoever put the . Button next to the space bar during certain keypad operations is an a hole because most of the searches I do look like this:
"What is the distance.to.the.moon"

so now I've done everything from resetting settings, resetting network settings, turning wifi off, turning phone in and off, messing with cellular data and background app refresh as well as notifications.
trying to use an app that has no cellular data while wifi is
off does not force the app to show up under Settings > Cellular Data.
it appears as though a lot of people are having this problem and sometimes the above mentioned things work and sometimes they don't. It looks like having Cellular Data turned off for
certain apps during an iO
God **** it now I have to write things in the Notes app and copy/paste them here because it's randomly not inputting my text and when I start typing it says "GGo" instead of Go, double typing the first letter. Why the **** doesn't Apple have a mobile app/setup of this?
Anyway it looks like if you have Cellular Data turned off for an app and do an iOS update it causes this bug. Sometimes the things above work, sometimes not. This is insanely frustrating.

2lis_03_um initial data load

Dear Consultants,
Our r/3 system is very busy.So I don't want to stop the r/3 system to extract the stock data.Is there any way to do it.I mean Can I extract the initial data while r/3 system is running.I am worrying about loosing the data.
Best regards

Hi,
In case of V3 update of Queue Delta update methodes,We have to lock the users when we are filling the setup tables. But in cese of Direct Delta update Mode, we need to lock the R/3 users until we complete both Filling set uptale and Delta init.
For more information on all these Methods, take a look on the note: 505700
<i>1. Why should I no longer use the "Serialized V3 update" as of PI 2002.1 or PI-A 2002.1?
The following restrictions and problems with the "serialized V3 update" resulted in alternative update methods being provided with the new plug-in and the "serialized V3 update" update method no longer being provided with an offset of 2 plug-in releases.
a) If, in an R/3 System, several users who are logged on in different languages enter documents in an application, the V3 collective run only ever processes the update entries for one language during a process call. Subsequently, a process call is automatically started for the update entries from the documents that were entered in the next language. During the serialized V3 update, only update entries that were generated in direct chronological order and with the same logon language can therefore be processed. If the language in the sequence of the update entries changes, the V3 collective update process is terminated and then restarted with the new language.
For every restart, the VBHDR update table is read sequentially on the database. If the update tables contain a very high number of entries, it may require so much time to process the update data that more new update records are simultaneously generated than the number of records being processed.
b) The serialized V3 update can only guarantee the correct sequence of extraction data in a document if the document has not been changed twice in one second.
c) Furthermore, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if the times have been synchronized exactly on all system instances, since the time of the update record (which is determined using the locale time of the application server) is used in sorting the update data.
d) In addition, the serialized V3 update can only ensure that the extraction data of a document is in the correct sequence if an error did not occur beforehand in the U2 update, since the V3 update only processes update data, for which the U2 update is successfully processed.
2. New "direct delta" update method:
With this update mode, extraction data is transferred directly to the BW delta queues every time a document is posted. In this way, each document posted with delta extraction is converted to exactly one LUW in the related BW delta queues.
If you are using this method, there is no need to schedule a job at regular intervals to transfer the data to the BW delta queues. On the other hand, the number of LUWs per DataSource increases significantly in the BW delta queues because the deltas of many documents are not summarized into one LUW in the BW delta queues as was previously the case for the V3 update.
If you are using this update mode, note that you cannot post any documents during delta initialization in an application from the start of the recompilation run in the OLTP until all delta init requests have been successfully updated successfully in BW. Otherwise, data from documents posted in the meantime is irretrievably lost.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) A maximum of 10,000 document changes (creating, changing or deleting documents) are accrued between two delta extractions for the application in question. A (considerably) larger number of LUWs in the BW delta queue can result in terminations during extraction.
b) With a future delta initialization, you can ensure that no documents are posted from the start of the recompilation run in R/3 until all delta-init requests have been successfully posted. This applies particularly if, for example, you want to include more organizational units such as another plant or sales organization in the extraction. Stopping the posting of documents always applies to the entire client.
3. The new "queued delta" update method:
With this update mode, the extraction data for the affected application is compiled in an extraction queue (instead of in the update data) and can be transferred to the BW delta queues by an update collective run, as previously executed during the V3 update.
Up to 10,000 delta extractions of documents to an LUW in the BW delta queues are cumulated in this way per DataSource, depending on the application.
If you use this method, it is also necessary to schedule a job to regularly transfer the data to the BW delta queues ("update collective run"). However, you should note that reports delivered using the logistics extract structures Customizing cockpit are used during this scheduling. There is no point in scheduling with the RSM13005 report for this update method since this report only processes V3 update entries. The simplest way to perform scheduling is via the "Job control" function in the logistics extract structures Customizing Cockpit. We recommend that you schedule the job hourly during normal operation - that is, after successful delta initialization.
In the case of a delta initialization, the document postings of the affected application can be included again after successful execution of the recompilation run in the OLTP, provided that you make sure that the update collective run is not started before all delta Init requests have been successfully updated in the BW.
In the posting-free phase during the recompilation run in OLTP, you should execute the update collective run once (as before) to make sure that there are no old delta extraction data remaining in the extraction queues when you resume posting of documents.
If you want to use the functions of the logistics extract structures Customizing cockpit to make changes to the extract structures of an application (for which you selected this update method), you should make absolutely sure that there is no data in the extraction queue before executing these changes in the affected systems. This applies in particular to the transfer of changes to a production system. You can perform a check when the V3 update is already in use in the respective target system using the RMCSBWCC check report.
In the following cases, the extraction queues should never contain any data:
- Importing an R/3 Support Package
- Performing an R/3 upgrade
- Importing a plug-in Support Packages
- Executing a plug-in upgrade
For an overview of the data of all extraction queues of the logistics extract structures Customizing Cockpit, use transaction LBWQ. You may also obtain this overview via the "Log queue overview" function in the logistics extract structures Customizing cockpit. Only the extraction queues that currently contain extraction data are displayed in this case.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method.
This update method is recommended for the following general criteria:
a) More than 10,000 document changes (creating, changing or deleting a documents) are performed each day for the application in question.
b) In future delta initializations, you must reduce the posting-free phase to executing the recompilation run in R/3. The document postings should be included again when the delta Init requests are posted in BW. Of course, the conditions described above for the update collective run must be taken into account.
4. The new "unserialized V3 update" update method:
With this update mode, the extraction data of the application in question continues to be written to the update tables using a V3 update module and is retained there until the data is read and processed by a collective update run.
However, unlike the current default values (serialized V3 update), the data is read in the update collective run (without taking the sequence from the update tables into account) and then transferred to the BW delta queues.
The restrictions and problems described in relation to the "Serialized V3 update" do not apply to this update method since serialized data transfer is never the aim of this update method. However, you should note the following limitation of this update method:
The extraction data of a document posting, where update terminations occurred in the V2 update, can only be processed by the V3 update when the V2 update has been successfully posted.
This update method is recommended for the following general criteria:
a) Due to the design of the data targets in BW and for the particular application in question, it is irrelevant whether or not the extraction data is transferred to BW in exactly the same sequence in which the data was generated in R/3.
5. Other essential points to consider:
a) If you want to select a new update method in application 02 (Purchasing), it is IMPERATIVE that you implement note 500736. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBV302 report.
b) If you want to select a new update method in application 03 (Inventory Management), it is IMPERATIVE that you implement note 486784. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBWV303 report.
c) If you want to select a new update method in application 04 (Production Planning and Control), it is IMPERATIVE that you implement note 491382. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBWV304 report.
d) If you want to select a new update method in application 45 (Agency Business), it is IMPERATIVE that you implement note 507357. Otherwise, even if you have selected another update method, the data will still be written to the V3 update. The update data can then no longer be processed using the RMBWV345 report.
e) If you want to change the update method of an application to "queued delta", we urgently recommended that you install the latest qRFC version. In this case, you must refer to note 438015.
f) If you use the new selection function in the logistics extract structures Customizing Cockpit in an application to change from the "Serialized V3" update method to the "direct delta" or "queued delta", you must make sure that there are no pending V3 updates for the applications concerned before importing the relevant correction in all affected systems. To check this, use transaction SA38 to run the RMCSBWCC report with one of the following extract structures in the relevant systems:
    Application 02:   MC02M_0HDR
    Application 03:   MC03BF0
    Application 04:   MC04PE0ARB
    Application 05:   MC05Q00ACT
    Application 08:   MC08TR0FKP
    Application 11:   MC11VA0HDR
    Application 12:   MC12VC0HDR
    Application 13:   MC13VD0HDR
    Application 17:   MC17I00ACT
    Application 18:   MC18I00ACT
    Application 40:   MC40RP0REV
    Application 43:   MC43RK0CAS
    Application 44:   MC44RB0REC
    Application 45:   MC45W_0HDR.
You can switch the update method if this report does return any information on open V3 updates. Of course, you must not post any documents in the affected application after checking with the report and until you import the relevant Customizing request. This procedure applies in particular to importing the relevant Customizing request into a production system.
Otherwise, the pending V3 updates are no longer processed. This processing is still feasible even after you import the Customizing request using the RSM13005 report. However, in this case, you can be sure that the serialization of data in the BW delta queues has not been preserved.
g) Early delta initialization in the logistics extraction:
As of PI 2002.1 and BW Release 3.0B, you can use the early delta initialization to perform the delta initialization for selected DataSources.
Only the DataSources of applications 11, 12 and 13 support this procedure in the logistics extraction for PI 2002.1.
The early delta initialization is used to admit document postings in the OLTP system as early as possible during the initialization procedure. If an early delta initialization InfoPackage was started in BW, data may be written immediately to the delta queue of the central delta management.
When you use the "direct delta" update method in the logistics extraction, you do not have to wait for the successful conclusion of all delta Init requests in order to readmit document postings in the OLTP if you are using an early delta initialization.
When you use the "queued delta" update method, early delta initialization is essentially of no advantage because here, as with conventional initialization procedures, you can readmit document postings after successfully filling the setup tables, provided that you ensure that no data is transferred from the extraction queue to the delta queue, that is, an update collective run is not triggered until all of the delta init requests have been successfully posted.
Regardless of the initialization procedure or update method selected, it is nevertheless necessary to stop any document postings for the affected application during a recompilation run in the OLTP (filling the setup tables).</i>
With rgds,
Anil Kumar Sharma .P

Runtime error while creating applicent initial data in PB10

Dear friends,
       in initial data entry in reruitment in PB10 once i complete the entry of data in organization assignment.it is going into ABAP runtime error.
Trigger Location of Runtime Error
    Program                               SAPLHRAC
    Include                                 LHRACU05
    Row                                     390
    Module type                         (FORM)
    Module Name                        READ_IT_FROM_DB
Short text
    Exception condition "INFTY_NOT_FOUND" raised.
can any help me how to resolve this issue.
Thanks in advance,
Regards,
sai prasad

Hi Revathi,
    With reference to your responce i have checked pb04. all that i found is it is not taking the number range that i have assigned in NUMAP feature it is taking other number range.
How should i go further with this.
Regards,
sai prasad

If I update my 4th gen ipod to the iOS 5, will I lose the data on my apps?

If I update my 4th gen ipod to the iOS 5, will I lose the data on my apps?

If everthing goes as planned, your app date wil be restored to the iPod. To help guard againste a possible mishap. sync (iTunes also creates a backup) the iPod before the udate and caopy the backup file to a save location in case something happens. The backup is located here:
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Will data in my apps be lost?

I will be changing my iPhone 4S to iphone 5s soon. I wanted to ask if the data inside my applications will be lost. If so how can I save my data inside my apps?

do a backup.
app data is aved in backup see:
WHAT IS CONTAINED IN A BACKUP
One active backup is contained in an iTunes backup and each time an new backup is created the previous backup is overwritten. An iTunes backup contains the following information:
Contacts* and Contact Favorites (regularly sync contacts to a computer or cloud service such as iCloud to back them up).
App Store Application data including in-app purchases (except the Application itself, its tmp and Caches folder).
Application settings, preferences, and data, including documents.
Autofill for webpages.
CalDAV and subscribed calendar accounts.
Calendar accounts.
Calendar events.
Call history.
Camera Roll (Photos, screenshots, images saved, and videos taken. Videos greater than 2 GB are backed up with iOS 4.0 and later.)
Note: For devices without a camera, Camera Roll is called Saved Photos.
Game Center account.
Home screen arrangement.
In-app purchases.
Keychain (this includes email account passwords, Wi-Fi passwords, and passwords you enter into websites and some other applications. If you encrypt the backup with iOS 4 and later, you can transfer the keychain information to the new device. With an unencrypted backup, you can restore the keychain only to the same iOS device. If you are restoring to a new device with an unencrypted backup, you will need to enter these passwords again.)
List of External Sync Sources (MobileMe, Exchange ActiveSync).
Location service preferences for apps and websites you have allowed to use your location.
Mail accounts (mail messages are not backed up).
Installed Profiles. When restoring a backup to a different device, installed configuration profiles are not restored (such as accounts, restrictions, or anything which can be specified through an installed profile.) Any accounts or settings that are not associated with an installed profile will still be restored.
Map bookmarks, recent searches, and the current location displayed in Maps.
Microsoft Exchange account configurations.
Network settings (saved Wi-Fi hotspots, VPN settings, network preferences).
Nike + iPod saved workouts and settings.
Notes.
Offline web application cache/database.
Paired Bluetooth devices (which can only be used if restored to the same phone that did the backup).
Safari bookmarks, cookies, history, offline data, and currently open pages.
Saved suggestion corrections (these are saved automatically as you reject suggested corrections).
Messages (iMessage and carrier SMS or MMS pictures and videos).
Trusted hosts that have certificates that cannot be verified.
Voice memos.
Voicemail token. (This is not the voicemail password, but is used for validation when connecting. This is only restored to a phone with the same phone number on the SIM card).
Wallpapers.
Web clips.
YouTube bookmarks and history.
* Your contacts are part of the backup to preserve recent calls and favorites lists. Back up your contacts to a supported personal information manager (PIM), iCloud, or another cloud-based service to avoid any potential contact data loss.
There are three backups saved in iCloud and the following information is contained in an iCloud backup:
Purchased music, movies, TV shows, apps, and books
Photos and videos in your Camera Roll
Device settings
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemail

I want to sync my ipod touch with my new computer. But I don't want to lose any data from my apps.

I want to sync my ipod touch with my new computer. But i don't want to lose any data from my apps. If i erase and sync does it only erase music and videos or does it include apps as well? I specifically don't want to lose any data from Instagram, I don't want to have to start over. Any help is greatly appreciated Thanks

Copy everything from your old computer to your new one.

XEM - Unable to load the initial data or the variances(delta) data into sys

I am installing xEM 2.0 SP 10 (SAP xApp Emissions Management) in a windows environment with SQL 5000. I installed xEM on NW 2004, usage types AS Java and EP 6.
I am attempting to load the initial data or the variances (delta) data into the system. Instruction is on page 15 in the install guide.
I am supposed to enter the following in the command line:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=[JDBC Driver];[JDBCUrl];[User];[Password]
Example command for import into SQL Server:
java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password
The customer I am with is running the xEM database on a different instance. This is where I run into a problem. I am not sure how to specify the instance in the script. This is what I have attempted so far:
C:\>cd temp\load
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:SQL3:1534 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43;SQL3:1534;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establishing socket. Connec
tion refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43 as user SQL3:1534 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Error establi
shing socket. Connection refused: connect): [DataDirect][SQLServer JDBC Driver]Error establishing socket. Connection ref
used: connect
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534;SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user
'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534 as user SQL3 (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver][SQLServer]Lo
gin failed for user 'SQL3'.): [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SQL3'.
C:\Temp\load>java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddte
k.jdbc.sqlserver.SQLServerDriver;jdbc:datadirect:sqlserver://PRODSQL43:1534:SQL3;SAPPEMDB;password
java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:datadirect:sqlserver:/
/PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unable to connect. Inva
lid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
        at com.sap.sdm.util.dbaccess.DBTask.dbImport(DBTask.java:356)
        at com.sap.sdm.util.dbaccess.SapTransTask.perform_import(SapTransTask.java:293)
        at com.sap.sdm.util.dbaccess.SapTransTask.execute(SapTransTask.java:51)
        at com.sap.sdm.util.dbaccess.SapTrans.main(SapTrans.java:21)
import aborted with java.lang.Exception: ERROR: Cannot connect to the database:ERROR: Connect failed to database jdbc:da
tadirect:sqlserver://PRODSQL43:1534:SQL3 as user SAPPEMDB (java.sql.SQLException/[DataDirect][SQLServer JDBC Driver]Unab
le to connect. Invalid URL.): [DataDirect][SQLServer JDBC Driver]Unable to connect. Invalid URL.
C:\Temp\load>
My last attempt was a command using colons and semicolons with the following results. The closest (there was a significant delay before the error or failure) appears to have been //PRODSQL43;SQL3:1534; (second attempt). The error listed from this attempt is   "Error establishing socket. Connection refused: connect".
I also checked the default database that user SAPPEMDB has in place and it is assign the correct database.
Please help.
Message was edited by: Owner
        Mike Smayrabunya

Hey,
It looks like one of the following:
1. The DB is down,
2. The user SAPPEMDB does not have the right authorization.
3. The password of the user SAPPEMDB is not password
4. The syntax is incorrect
in order to find what is the problem,
please:
1. Login in the the DB PRODSQL43:1534 with the user "SAPPEMDB" and the password "password",
this will eliminate the options 1 - DB down, 2 -SAPPEMDB does not have authorization and 3 - password of the user SAPPEMDB is not password.
2. If the login failed, than please run sql trace with security elements (in the client there is a tool called "SQL Profiler"
3. If the login is correct, than you check the syntax of the command:
"java -Djava.ext.dirs=. -jar SAPtrans.jar import logfile=import.log datafile=init.dat connectstring=com.ddtek.jdbc.sqlserver.SQLServerDriver; jdbc:datadirect:sqlserver://vma03:1433;SAPC11DB;password"
According to the error message "Error establishing socket. Connection refused"
it looks like The DB is down or syntax is incorrect.

HT201299 My Iphone 4s wont remember the disable cellular data for certain apps as I soon as I switch on the 3g and go back to home and come back again to Cellular the all apps are being enabled..Please help

My Iphone 4s wont remember the disable cellular data for certain apps as I soon as I switch on the 3g and go back to home and come back again to Cellular the all apps are being enabled..Please help

First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Including initial data in an app.

Similar Messages

Maybe you are looking for