Inconsistent data in reports while data populated when BI Publisher is up

Hi,
I am using an sql query in my report to populate data into it. The BI Publisher is up and running and then I viewed the report. It is displaying the data fine.
Now, I added/updated/deleted the data into corresponding tables. The BI Publisher is still up and running.
Now, when I try to view report the data getting displayed is not in consistent with the data in database. If I restart BI Publisher then the data is consistent with database.
Can any of you tell me what to do to avoid this? Am I missing any configuration here? Is there any kind of caching happening within BI Publisher which can be prevented?
Appreciate your help reg. this issue.
Thanks in advance,
-Vijay-

Hi,
there's a document cache at report level. Check if this is activated (which is as default). You'll find the checkbox Enable document cache at report level.
Regards
Rainer

Similar Messages

"Selected report cannot be loaded" when running published crystal analysis

Hi,
When running published crystal analysis reports (*.car) within Crystal Enterprise 10 i receive the message below. This is happening to all published crystal analysis reports. Can open the reports fine within Crystal Analysis Professional itself.
"Crystal Analysis Professional - The selected report cannot be loaded because one or more required parameters do not have an assigned value. "
any assistance would be appreciated
tks.

If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces

Stop date population when form is signed

I have a form that has a Request Date field that gets the current date from the user's machine using the following Javascript in the calculate event.
$.rawValue
= Concat(Num2Date(Date(), "MMMM DD, YYYY"), " ")
This works as expected, meaning it autopopulates the date each time the document is opened. When my form is signed (using a Document Signature field), the Request Date becomes read-only, however I need it to stop the script and become read-only thereby getting the date that the form was signed. Is there a script that I can put on my document signature field to abort the date script?
Any help you have would be greatly appreciated!

It's quite a round-about script... Why not simply use the signature signing script to set the value of the date field? The correct syntax for that is:
this.getField("DateField1").value = util.printd ("m/d/yyyy", new Date());

No data loaded when running publish/subscribe sample on Tomcat

I have Tomcat 6.0 running as a .jsp handler with Apache 2.2 using the mod_jk connector. I've configured the samples/ context to be handled via Tomcat. Everything seems to be working fine -- I can access the files and launch .jsp files via my web browser.
But when I try to fire up the DataPush example, I get no results from BlazeDS. Here's the procedure I am using:
1. Start the feed by running http://localhost:8080/samples/testdrive-datapush/startfeed.jsp
2. Run the Flex side: http://localhost:8080/samples/testdrive-datapush/index.html.
3. Press the "Subscribe to 'feed' destination."
Using Firebug within Firefox, I can tell that it's attempting to access a streaming channel. There are two requests:
1) http://localhost:8080/samples/messagebroker/streamingamf
2) http://localhost:8080/samples/messagebroker/streamingamf?command=open&version=1
Request #1 comes back with a plain-text "Loading..." response.
Request #2 returns an error message: The request sent by the client was syntactically incorrect ().
Incase it matters, I have been playing around with the config files in previous tests. For this test, I deleted the samples.war, and samples/ directory from Tomcat. Then I copied the original samples.war back in and restarted Tomcat to redeploy. I would think that this erases all of my configuration settings -- but it does not seem to be doing that (The Data Push/Pull does NOT default to streaming from the Turnkey package, yet when I hit the service again, it always tries to perform streaming first -- as I had told it to do in a previous configuration).
So I have two questions:
1. Why doesn't the example work using streaming?
2. Why aren't my configuration files being reloaded when I restart Tomcat?
TIA
Jonathon

Hi,Alex
Thanks for your advies, But it do not works.
with a Apache Fronting Tomcat, the following config is work:
channel 1 : Hi. Here are answers to your questions.
>
>>>1. Why doesn't the example work using streaming?
>Some proxies buffer the response that is sent back to the client. This causes streaming connections to not work. This is a known issue with the mod_jk connector. Take a look at the following bug for more info.
>http://bugs.adobe.com/jira/browse/BLZ-84
>
>>>2. Why aren't my configuration files being reloaded when I restart Tomcat?
>Did you recompile the sample application after changing the configuration? The configuration information is used by both the server and the client and is compiled into the client. You will need to recompile the client application using the new configuration files if you want your changes to be picked up. Note that is is possible to load the configuration information into the client application at runtime but that's not how the sample applications were built. If you are interested in loading the configuration information at runtime here is a blog posting that gives an example.
>http://coenraets.org/blog/2009/03/externalizing-service-configuration-using-blazeds-and-lc ds/
>Hope that helps.
>-Alex
>

Address Book won't sync with MobileMe - inconsistent data!

I recently began getting 'Inconsistent Data' messages when I sync with MobileMe for my Address Book. I have always had an auto sync and never had this issue. I am told to reset the MobileMe data from another computer - which I have tried to do but with similar error results.
My most recent data is on MobileMe...I have so far failed to sync this data set with what's on my Mac Platforms.
I have tried to resort to merge data or erase data on this computer from the sync options dialogue box, but still end up with "inconsistent data. Try resetting your data on MobileMe".
I'm afraid that if I did that, then I will lose all my current data on MobileMe - which is the most recent, since most of my input for my contacts is made directly from my iPhone or iPad (both of which are syncing correctly).
Anybody have any ideas?

I have the exact same problem but have not been able to get my computers to sync with contacts although my iphone and Ipad are working perfectly. I tried deleting all my contacts in both mobileme and locally and tried to sync but was unsuccessful and still get the inconsistent data message. I hope someone can help us.

I'm getting the below issue when I try to deploy a report with Dynamic parameters, when I deploy it with static parameters I'm not getting this issue.

I’m getting the below issue when I try to deploy a crystal report with Dynamic parameters in BI Launch Pad, when I deploy the same report with static parameters I can deploy and run it. I have Restarted the BI server, still the issue exitno use. kindly help me on this issue.
“This error occurred: Adding Crystal Report "CrystalReport1.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file CrystalReport1. Reason: Failed to read parameter object”.

BO does not run dynamic params through the report as would happen without BusinessObjects (BO) or Crystal Reports Server (CRS). When you publish a report with dynamic parameters to BO/CRS, the prompt is published to the repository so that it can be accessed through the Business View Manager (which can be installed as part of the client tools). In order for this to work a couple of things need to happen:
1. You need to be sure that you check the "Update Repository" box on the Save As screen the first time you publish the report.
2. Your BO/CRS user needs to have "view" access to the Crystal2013ReportApplicationServer in the Servers section in the CMC - in fact, the Everyone group should be given view access to the server in order for dynamic prompts to work correctly.
3. In the Business View Manager, the Administrator user needs to give your user, or, even better, a Crystal Developers group full control access to the "Dynamic Cascading Prompts" folder.
Best practice for dynamic prompts in a BO/CRS environment is to actually create the prompts in the Business View Manager. This will allow you to create a single data connection that can be reused and also create lists of values such that the same list or prompt can be reused by multiple reports. If you just create the prompts in Crystal, you will end up with multiple data connections to the same database, the prompts will use the whole query for the reports to get the dynamic values instead of just a focused query to the lookup table that contains the values, and there ends up being lots of duplication and chaos.
-Dell

While trying to open the order in co03 or co02, It is not opening and showing the error message as "Inconsistent data : order 107434 16.09.2013, duplicate entry o 0020. is showing ?

Hi,
While trying to open the order in co03, co02, I am getting the below error message : Inconsistent data : order 107434 16.09.2013, duplicate entry o 0020 is showing. Please guide me the way forward.
Regards,
Mastan.

Hi Mastan
The report mentioned by Rajen should clear the inconsistent records.
Please observe that you could have found this by yourself report with a quick note search for this error message or even searching for old threads.
Even a google search points to the solution.
You should do your own research before opening such kind of thread.
BR
Caetano

Report showing data only when preview in Eclipse is executed

Hi people,
I intend to do a dynamic report sending two parameters and displaying on browser.
My application runs under Coldfusion 9 and i'm using Java Reporting Component for report generation and Crystal Reports Design for Eclipse 2.0 for design and Oracle 10g database.
In first preview it shows the parameter window and after confirmation the report is generated. But when i preview again the report is generated with the older data. It seems that the data in the first execution is cached.
In Coldfusion execution the report appears in browser when the value on the line parameter.setCurrentValue("","Pessoa",value); is the same used in preview. After change this an generic exception Error loading JDBC driver. Class 'oracle.jdbc.driver.OracleDriver' not found is throwed.
The Coldfusion code is below.
<cfscript>
     byteRead                    =     '';
     exportFormat               =     createObject('java','com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat').PDF;
     reportBuffer               =     createObject('java','java.io.ByteArrayOutputStream');
     reportDocument               =     createObject('java','com.crystaldecisions.reports.sdk.ReportClientDocument');
     reportParameter               =     createObject('java','com.crystaldecisions.reports.sdk.ParameterFieldController');
     printOutputController     =     createObject('java','com.crystaldecisions.reports.sdk.PrintOutputController');
     connInfo                    =     createObject('java','com.crystaldecisions.sdk.occa.report.data.ConnectionInfo');
     reportPath                    =     expandPath('report/DividasPessoas.rpt' );
     reportDocument.open(reportPath, 0);
     parameter = reportDocument.getDataDefController().getParameterFieldController();
     parameter.setCurrentValue("","Credor","1");
     parameter.setCurrentValue("","Pessoa","226426");
     printOutputController = reportDocument.getPrintOutputController().export(exportFormat);
     reportDocument.close();
     do{
          byteRead = printOutputController.read();
          reportBuffer.write(byteRead);
     }while( printOutputController.available() NEQ 0 );
     reportBuffer = reportBuffer.toByteArray();
</cfscript>
<cfheader name="content-length" value="#ArrayLen(reportBuffer)#" />
<cfheader name="content-disposition" value="inline;filename=Report.pdf" />
<cfcontent type="application/pdf" variable="#reportBuffer#" />
I googled a lot about the problem, reviewed all Eclipse options to disable the "cache" but everything was unsuccessful.
I don't know if missing code is causing this or another component that i need to use.
Any suggestions?
Thanks everybody for attention and sorry for english errors.
Ian

Hi,
Regarding your query that when you preview a report that has parameters in it, the prompts daillog box comes when you first preview the report.when you again preview you get the old values again.
For this there is a refresh button, click on refresh, it will again promt you for parameters.
Thanks
Prithvi

Can we change the date/ime of report while uploading in Enterprise?

Hi, We are on BOXI R2 SP3 using IIS as web app servers on windows server 2003. We are using .NET SDK to integrate BOXI with custom application. We store report in custom application and don't load in BOXI until someone tries to run it. During run we will check if the version present ( date and time) in BOXI is later than our application or not. If no this means BOXI has older version and we will upload new version from Application into BOXI enterprise.
For the reason we are using date/time to verify version therefore we want BOXI to store the date/time of the actual report not the date/time when it was uploaded in BOXI.
Does anyone has any idea if we can change it or correct it for first time loading?
Thanks,

I don't think that the date/time last modified is accessible. You could use the SummaryInfo of the report to maintain this information yourself. This is part of the RAS SDK. There is a comments section available that you could use for this.

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

No Data Found when Sum in Report is checked?

Does anyone have an Idea why ora-1403 error occurs when you select sum a numeric column in report? It goes away when I deselect it. I have run several reports and this is the first time I experienced this in version 2.0.

report error: ORA-01403: no data found when SUM columns
This person has the Error also, any suggestions?? A Bug??

How to Avoid Printing the data twice when the sub report has drill down?

Hello,
I have a sub report that has drill down which is placed in report footer.When i run the report sub report displays the data but when i tried to drill down it displays the same data again.After that i can able to drill down on sub report.Is there any way to avoid
printing the same data twice.
Thanks in advance.

Hi,
If the subreport you're referring to does not grow in size and it does not span multiple pages and you know the size of it, here's what you can do to stop drilling into subreports :
1) Create a text object as large as the subreport (perhaps bigger than it) and fill it with spaces or new lines
2) Place it 'over' the subreport such that it covers the entire area occupied by the subreport
3) The subreport at all times should be smaller than the text object in all dimensions
Now, when you hover the mouse over the subreport, there isn't any magnifying glass for you to drill down into.
If the subreport has further drill-down functionality, then this isn't for you! Because, it just wouldn't allow you click on any objects in the subreport because of the text object eclipsing it. This is the only workaround I know at this point in time and I know a lot of users are looking for this.
I would suggest that you log this as an Enhancement Request at http://ideas.sap.com for our developers to have a look into this.
And finally, I also found an old forum post where Jamie has suggested a way to get this working on the Business Objects Environment. Give it a shot, if that's where the reports are eventually run.
How to disable subreport view
Hope this helps!
-Abhilash

Data disappears when a field is added to report

I have a report that uses two files. The first one has a field called "amount code", and the second includes that code field as well as a description of the code.
But when I link that second file to the first one, data disappears when I drag a field from the second file into the report. The first 10 fields in the report are from the first file, and they look fine. But as soon as I drag in any of the fields from the second file, all of the data in the report disappears. (This happens no matter where I drag that field to...data, page headers, etc.)
I'm pretty sure I have the files linked correctly. Can anyone tell my why this happens?
(When I use the either file by itself, things look fine.)
Thanks, Jon

Hi Raghavendra,
I think I have it figured out (or more accurately, our DBA figured it out for me).
The problem is that in the main file, the code field is only one digit long (string). But in the second file (the code description file), that code field is 8 digits long, even though only the first digit has any data (followed by 7 blanks). Therefor CR doesn't see any matches.
It looks like the solution is to truncate the field in the code description file so it's only one digit long instead of 8.
But thanks for the help...I'm clearly over my head, and very much appreciate your assistance.
Jon

Index: 0, Size: 0 error while creating data template in BI Publisher

Hi
When i am trying to create the data template for BI Publisher reporting. i am gettinhg the Index: 0, Size: 0
error. I checked the query that i have used to create template and it is working fine. But not sure why it is not happening while creating the data template. Can anybody help me out please.

how about pasting the content of your data template here, so that forum members can see what could be the problem.

Truncating arabic data/text when deployed on 10gAS, where as Eng is Ok

DETAILS:
When I run a report using report builder everything is fine. But when I deploy that same report on Application server & when I run from browser, the arabic data in the report is getting truncated ! where as English text/data is ok.
To solved this problem I have to expand each text / item in report builder. But why with arabic only? And how the report is working fine when run using Report Builder? For some reports even after expanding still gets truncated while deployed on Application server.
I think the FIX is around PDF. when report is deployed on AS, then output is generated in PDF & then above problem is encountered. Where as executed in Report Builder, output is generated in previewer which is fine.
please help
Edited by: Mubeen on Mar 18, 2009 2:56 AM

I have experiecnce with this problem... and unfortunatly ther's not solution.
Some trigger (like when-mouse-enter or when-mouse-live) don't work with form deployed on web. I suppose that these triggers are not supported in deployd on web because the "client" browser shuld be constantly comunicate with the runtime engine.

Inconsistent data in reports while data populated when BI Publisher is up

Similar Messages

Maybe you are looking for