Increase credit limit to release sales order

Dear
We are using the dynamic credit control. When one sales order was blocked for exceeding the credit limit.
Can we increase the credit limit in credit master data(TCODE: FD32), and then sales order will be released automatically, and do not need to use TCODE: VKM1/VKM4 to release the sales order?
Thank you.
Guoyu

Increase Credit Limit through T.Code: FD32
or
Release the sales order through T.Code: VKM3
Regards,
Rajesh Banka
Reward points if helpful

Similar Messages

Repeat credit checking for released sales orders

Hi,
We are implementing FSCM Credit management in our project. In our system, when the sales order is created, the credit check will happen and the failed orders will go to VKM1. Till the order is released, any change to that order will trigger the credit checking process.
But once the credit block is released in VKM1, Credit checking is triggering only for
Quantity change
Adding new line items
Credit checking is not triggering for any other changes to the SO like deleting the line item changing the payment terms etc..
I would like to know if there is any control in FSCM Credit management to repeat the credit checking process for the released sales orders.
Appreciate any help in this regard.
Thanks
Prabhakar

Hi Prabhakar,
Navigate to Financial Supply Chain Management--> Credit Management--> Integration with sales and distribution-->define automatic credit control.
Over there you need to check critical fields check box for this to happen. Hope this helps

Static Credit Limit Check for Sales Orders - Net Value vs Credit Value

We are testing order credit check and we have run into a problem with the Static Credit Limit Check. The Static Credit Limit Check is set to use both Order and Delivery Values. SAP uses the values in S066 and S067 to determine what values it uses to check against the credit limit. Standard SAP uses the confirmed quantity times the credit price to get the order values - this is the credit value.
So the problem is, once an order is released it is set up so it does not go back on credit hold, so anything which is not confirmed (but could be) it a potential credit value which is unaccounted for in the credit exposure and the customer can go over the credit limit.
Additionally, we run AFS and have items which are rejected with a J0 rejection code (unconfirmed) which have the potential of being confirmed and shipped and we want to include these items in the value of the order which is being checked against the credit limit (along with the deliveries, invoices and receivables).
Here is a quick example.
Customer has a credit limit of $100 (no deliveries, invoices or receivables - to keep it simple)
Order 1 is placed with a credit value of $50.00 but a potential value of $100 (the other half is J0) - this passes the credit check since $50.00 is less than the limit.
Order 2 is placed for $50.00 and has a credit value of $50. This also gets approved.
At this point, the credit limit used is 100% (based on standard SAP)
Then Order1 backorder is confirmed and the new credit value is now $100. This order now puts the customer over their limit and if the order had been released would not go back on credit hold and therefore the customer is not over their credit limit by 50%.
What I want is for Order1 to be credit checked for the $100 not the $50 so the exposure is correct.
Does anyone have any suggestions as to how we could use the Net Value of the order to perform the static credit check? And any thoughts on how to determine the correct credit exposure (open order value plus items which are J0, plus deliveries, plus invoices, plus receivables)?
I am thinking about a Z table to track the adjusted values on the orders and then use one of the customer checks to do a static credit check with the adjusted value. And for the exposure, use the adjusted value to recalculate the values in F.35 to show a more accurate view of the credit exposure.
Does anyone have an easier way to do this? Any advice is appreciated.
Thanks,
Suzanne

Hi Suzzane,
In the scenario that you have provided, in the first order items worth 50$ are rejected. Hence standard SAP will not take this into account as this item is rejected.Two solutions can be provided here:
1) The line item can have a delivery block instead of a reason for rejection.This way the 50$ will get accounted.However, if this is against customer norms as this will appear in the order acknowledgment, this cannot be used.
2) User exit can be used where a credit check can be triggered once the document value changes, even though the document has a released status.
Hope this helps.
Thanks,
Vinu

Credit Block for released sales order

Dear All,
I have got one issue. There is a sales order which was created earlier say 15 days back. It went into the credit block at the time of saving it. It was released through VKM3 too.
Now when i change any field in the sales order today, it is going into the credit block. We are not changing any value of any of the item. Just maintaining the Billing block in it or remobving the Billing block.
The number of days maintained in the OVA8 are 182. So as per the standard functionality it should not go into the credit block for any change in the sales order like changing the billling date or changing the billing block.
Can you please let me know what might be the reason for this sales order to go into the credit block..??? Any help is very much appreciated.
Thanks and regards,
Vishi.

Dear Vishi
Please check if you have checked the critical fields option.
Credit check against critical fields (fixed value dates)
The indicator controls the critical field check. If the field is selected, the system checks whether critical fields have been changed.
Use
If a check is carried out, the following fields are relevant:
Payment terms
Additional value days
Fixed value date
Note
Use this type of check for sales documents only.

Credit limit Block for Sales Order.

Hi.
when customer will create Sales order, it should get blocked for Credit check.
& customer will realese it with VKM3 transaction for particular document type .
Where will i do the setting?
is it Delivery Block 01-Creit Limit check?
Reg,
Amol

Hi Amol,
You can gonfigure it from SD > Basic functions > credit management/risk management settings > credit management > define credit group and assign sales doc and delivery doc. addtionally, you need to maintain automatic credit control configuration and maintain it to customer specific from FD32 regarding of its credit control area.
Regards,

Customer Credit Limit on CRM Sales Order

Dear All,
Can the customer credit limit be displayed on CRM Sales order(Customer from ECC, we use simple credit check on SAP ECC)
Regards,
Ahmed

Hi,
The standard credit check in SAP CRM calls up the automatic credit check in SAP R/3. You must define an RFC destination, and specify this destination for the credit check.
· To define RFC destinations in CRM Customizing, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Define RFC Destinations.
· To specify destinations for the credit check, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Middleware Parameters ® Define Middleware Parameters. Then choose the activity Credit Check and enter an RFC destination for the parameter CRMCREDCHE.
You can also carry out an initial data transfer for credit data.For transactions that are still open for which you are reactivating update of credit data, you can initially transfer the credit data for a reorganization of data in SAP R/3. To do this, start the initial data transfer for object CMDOC_NOTIFY using transaction R3AS.
When setting up credit limit check, refer to SAP Note 568157, 570155 and 619500.
With Regards
Selvam T

Credit limit (AR Invoice + Sales Order)

Dear Experts,
We have a bit of a problem here, so here is the scenario:
Customer 1 has a credit limit of 100,000
He orders an amount of 90,000, then he orders an amount of 20,000. since it is a service order the approval procedure will not prompt and can be added to A/R invoice with a account of 110,000. so he had exceeded his credit limit by 10,000.
is there a way to active approval procedure by adding all open Sales Order and Open A/R Invoice?
i have seen some queries in the forum but it is not activating the approval procedure.
for your help please.
thanks!.

Hi,
Try this:
1. Create new approval procedure for sales and AR invoice.
2. Under terms select When the Following Applies--->Deviation from Credit Limit--->select Greater than from Ratio and enter required value
Thanks & Regards,
Nagarajan

Credit Block released Sales order report

Hi Experts,
My client is given few sales orders (around 4)no and requesting us, to prepare the credit block released sales orders report (include released person user ID).
*.No change logs is existing for all sales order and deliveries.
For above requirement I am using CDHDR table data but I am not getting credit block released sales order report.
Below fields I am using in CDHDR Table.
Change doc.Object (objectclas) : VERKBELEG
Document No (CHANGENR): Sales order no XXXXXXX
Transaction no (TCODE) : VKM1,VKM2,VKM3
Date(UDATE) : 25.09.2011 to 09.11.2011
Experts, Can you please help me out for this.
Thanking you!!!!
Regards,
Vijaykumar Kola
*.I'm already aware of this is a new development.

Try this, simple report... Here we check the new value of credit status field VBUK-CMGST and if it is 'D' we know that someone used VKM* transaction to release the document. Also you need to format the sales order number with leading zeros so it occupies all 10 digits and pass it to CDHDR-OBJECTID field (and not CHANGENR field). In the below code I am using select option for sales order number, so I know it will be formatted with leading zeros and so select on CDHDR will be successful.
*& Report ZTV_TEST
REPORT ztv_test.
TABLES: vbak, cdhdr.
SELECT-OPTIONS: s_saldoc FOR vbak-vbeln OBLIGATORY,
                s_udate FOR cdhdr-udate.
RANGES: r_objid FOR cdhdr-objectclas.
DATA: ls_cdhdr TYPE cdhdr,
      ls_cdpos TYPE cdpos.
IF NOT s_saldoc IS INITIAL.
LOOP AT s_saldoc.
    MOVE-CORRESPONDING s_saldoc TO r_objid.
    CONDENSE: r_objid-high, r_objid-low.
    APPEND r_objid.
ENDLOOP.
ENDIF.
CHECK NOT r_objid[] IS INITIAL.
SELECT *
INTO ls_cdhdr
FROM cdhdr
        WHERE objectclas = 'VERKBELEG' AND
              objectid IN r_objid AND
              udate IN s_udate AND
              tcode LIKE 'VKM%'.
SELECT SINGLE *
    INTO ls_cdpos
    FROM cdpos
      WHERE objectclas = ls_cdhdr-objectclas AND
            objectid = ls_cdhdr-objectid AND
            changenr = ls_cdhdr-changenr AND
            tabname = 'VBUK' AND
            fname = 'CMGST' AND
            value_new = 'D'.
IF sy-subrc = 0.
    WRITE:/ ls_cdhdr-objectid(10), ls_cdhdr-username,
            ls_cdhdr-udate, ls_cdhdr-utime.
ENDIF.
ENDSELECT.

Repeat credit check does not happen for already released sales orders when CMGST =D, for the second time using FM SD_ORDER_CREDIT_CHECK

Hi,
I have written a routine which will call the FM SD_ORDER_CREDIT_CHECK whenever there is a rejection and again unrejection of a same sales order, we are only concerned about already credit released sales orders, the scenario is as follow
1). Sales order created in the system --> Credit check --> Credit blocked
2). Release credit block manually CMGST =D
3). Reject sales order then unreject the same
4) Routine will determine rejection and unrejection of the order while saving and will call the FM SD_ORDER_CREDIT_CHECK
5) The order is credit checked and blocked if necessary
All goes well till this point
but when the same sales order is rejeceted and unrejected multiple times either partially/ fully then the Custom routine calls the FM for credit check but the FM fails to put the order back on credit hold
in short the FM works only for the first time incase of mutiple rejection and unrejection of teh same sales order then the FM SD_ORDER_CREDIT_CHECK fails to put the order back on credit hold from the second time onwards
if some one any idea of the behavior of this FM please share your thoughts and inputs . thanks !!

Issue resolved
The Standard FM “SD_ORDER_CREDIT _CHECK” uses the field “Release date of the document determined by credit management VBAK – CMFRE”
For any sales order that is manually credit released in a single day, Only one credit check is triggered (per day) if there is any change in the sales order and then the order goes back to credit hold and if again the order is manually credit released for the second time in a single day there will be no credit check (still the order will pass into FM but the update entry in the internal table will be blank)this is a standard functionality
Process of rejection and unrejection :
Blocked order -->released-->blocked again (first time after manual release same day) unrejected (same day) -->but no credit check (all this in a single day)
note : OVA8 - released document still unchecked = 0 Days , Deviation %= blank

How to Find Credit Check Released Sales Orders /Deliveries?

Hi Gurus,
How to Find Credit Check Released Sales Orders /Deliveries for a particular Customer.
Regrds,
Binayak
Message was edited by: Binayak
Binayak Ghosh

Hi,
You can chech inthe Tcode VKM2 Released SD documents, and VKM4 SD documents.
reward if useful
Regards
syed

Report for viewing credit limit block released documents

Hello All,
Our client's requirement- credit limit check to be carried out and authorised persons can release the blocked orders.
But is there any report at month end to see how many documents were released and who released them Is there any standard report for viewing these or ABAP has to develop them? VKM2 transaction- released SD Documents would not show any released documents once billing is done i.e, once the sales documents is released it cannot be known who released it and when, how to track this?. so what can be the solution for this? Please suggest
Regards,
RAJ

Dear Raja,
Use VKM4 t code.
You can see both credit released sales orders and deliveries.
Put Overall credit status as D.
You can see how much value was released, when it was released. But with which user id it was released you cant see it.
Regards
Abhilash

Credit management for Old sales orders

Hi experts,
pls consider the follwing example where i am facing some problem.
I activated the Credit lock system in Sales order level (Warning message with release strategy)and in PGI. (Warning message with release strategy).
Customer A
C.limit : 10000
Outstanding : 7000
Sales value(Without pending sales order value): 2000
Eli gable new sales order value 1000
Pending sales order value 5000(Sales order no 111)
Now if i process this old SO no 111 in VL01N i am getting error that Order blocked due to credit limit. But i activated dynamic credit control only in sales order and in PGI.Not activated in VL01N level.
Awaiting for your valuable reply.
Thanks
SR

Hi
1.KIndly check in the sales order that you have maintain the payment guarentee procedure because of this the system is not allowing to do the delivery
PATH: VA02sales order no-Go toItembilling document---payment guarentee procedure
so kindly check that and remove or assign the financial document to that for processing the billing
2.Check the credit lock procedure is release or not
By doing above the issue will be resolved,kindly check and confirm.
if you have any further clarifications let me know
REgards
Damu
KIndly check the belwo

Credit block in a sales order

Hi All,
Is it possible to find out who has released a credit block in a sales order. Is there any table or T-CODE .
Normally , it is displayed in the Change log of the sales order . But in our case the change log is not showing any details of the credit block . Can there be any reason why it is not showed in the Change log .
Please help .
Regards,
Pallavi

Hi
Please try this:
Pass VBELN to CDHDR table as OBJECTID along with OBJECTCLAS = VERKBELEG To Fetch CHANGENR (Document number)
Pass CHANGENR, and VBAK-VBELN, OBJECTCLAS =VERKBELEG, TABNAME=VBAK and FNAME=FAKSK into CDPOS table to
Fetch CHANGENR
Pass the CDPOS-CHANGENR as CHANGENR and OBJECTCLAS = VERKBELEG into CDHDR table again to get change details.
P.S. If sales order was blocked and unblocked by some one, it should display in Change log of sales order.

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

VKM1 - Release Sales Orders - Job schedueling

I have maintain automatic credit control for same of the sales documents (the control at the moment checks a review date that should not be in the past, from FD32. If it is in the past it blocks the sales order)
In the meanwhile, I have maintain a job that runs once a day and releases sales orders if there has been any change in the FD32 of the customer concerning the review date. If there is no change the sales order remains blocked.
There are though some cases of sales orders that the sales manager regardless of the review date wants to release them. He enters the vkm1 and releases them.
Up to this point everything is perfect.
If the sales orders that are released by sales manager using the vkm1 became delivery or invoice before the job schedueling runs there is no problem. If for any reason the sales orders are released by the manager using vkm1 but the next function (delivery or invoice) happens after the job schedueling has run again, the sales order becomes blocked again.
Is there a way that if the sales order is released by the manager using vkm1 not to become blocked again if the job runs again (so as not to have to release the same sales order more than once)

I will move this questions to SD

Increase credit limit to release sales order

Similar Messages

Maybe you are looking for