Increased upload quota (2 Mb) in squirrelmail

Hi everybody !
How i can upload a file more than 2 Mb in squirrelmail ?
This limit is curious at the time no ?
Thanks for response.

You have to change a setting in the php.ini file (Squirrelmail uses PHP).
Mostly you can find this file in /usr/local/lib.
Look for the "postmaxsize" string in the file. Now it will be 2MB, change it to the amount you like. I prefer 10MB as a max.

Similar Messages

  • How can we increase resource quota of sandbox solution in sharepoint 2013?

    Hi,
    i have created a sandbox solution for sharepoint 2013 but the problem is it shows that your resource usage exceeds your quota.so is there any way we can increase the resource usage quota.
    my application is on sharepoint online 365.
    thanks,
    Gaurav

    Sandbox solutions have been deprecated for SharePoint 2013.  And if you're using this within Office 365, then I'm guessing it means you've navigated directly to the _catalogs/solutions library?  As this resource quota is normally controlled from
    Central Administration, you might be stuck with your curent quota.
    Andy Burns has some interesting observations on Office 365 limitations when it comes to Sandbox solutions
    http://www.novolocus.com/2012/07/17/office-365-technical-observations-from-a-first-project/
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Is it possible to increase upload speeds?

    My upload speed is reported as being 0.31mbps by BT's own speed tester, and checking with speedtest.net gave a somewhat similar 0.34mbps today (though this moves around a lot between 0.05 and 0.25 normally).
    Is there a way of boosting this?  
    I've read about line speed capping, is this something that folks know how to verify?
    Here are my line stats.
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    3 days, 12:15:37
    Downstream:
    9.494 Mbps
    Upstream:
    440 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    8.0 dB / 6.5 dB
    Line attenuation (Down/Up):
    32.6 dB / 18.1 dB
    Output power (Down/Up):
    19.3 dBm / 12.6 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    54224 / 83
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    736967 / 31
    Error Seconds (Local/Remote):
    13540 / 184

    Are you connected to the test socket? With your attenuation and a good line i would expect a connection speed in region of 13mb. Your upstream speed may well increase to .8/1mb at the next reset
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • How do I increase upload speed?

    How can I increase my upload speed to match my download speed? Currently getting 15Mbps dowloan and only 1.9 Mbps upload. Road Runner says its an issues with the router and not their network. I've alread powered down the router and disconnected it from the modem. I've plugged everything back in and noticed an increase in upload speed, but not download speed.

    Upload speeds are never the same as download speeds for home broadband. Road Runner (whatever that is) is incorrect.

  • Increase Mail Quota

    I have a Mac Pro with Leopard Server. I'm trying to increase the Mail Quotas for some of our users over 2GB.
    When I update this value in WGM, everything seems to work ok, but the users, sitll get the warning over x% of mail quota.
    Any idea what im doing wrong?

    As you can see the server admin changes did not make their way to the database itself.
    You can either try using cyradm (see man page tidbit below)
    "setquota" root resource value [resource value ...]
    "sq" root resource value [resource value ...]
    Set a quota on the specified root, which may or may not be an actual mailbox. The only
    resource understood by Cyrus is "STORAGE". The value may be the special string "none"
    which will remove the quota.
    Or look at downloading siradmin and see if that interface helps at all. Siradmin is easier than cyradm but if you are going to be administrating this mail server, you should learn cyradm..
    Siradmin: http://explanatorygap.net/sw/SirAdmin.app.zip
    I hope this helps..

  • Increasing tablespace quota

    Hi
    i have a requirement in which i need to increase tablespace size for my schema. actually the tablespace that is given to me is shared by many other 'owners' too but i want the datasize just for me to be increased.
    SELECT OWNER,TABLESPACE_NAME,SUM(BYTES/1024/1024) "Allocated Size in MB"
    FROM DBA_SEGMENTS WHERE TABLESPACE_NAME = 'DATA_TS1'
    GROUP BY OWNER,TABLESPACE_NAME ORDER BY OWNER;
    will give this result
    OWNER | TABLESPACE_NAME| Allocated Size in MB
    30026882 | DATA_TS1 | 170.9375
    30042534 | DATA_TS1 | 0.1875
    myself | DATA_TS1 | 106951.875
    now how can i just increase quota for 'myself'?
    Can this be done? and if so can you plz provide me with syntax?

    Hi,
    974647 wrote:
    SELECT OWNER,TABLESPACE_NAME,SUM(BYTES/1024/1024) "Allocated Size in MB"
    FROM DBA_SEGMENTS WHERE TABLESPACE_NAME = 'DATA_TS1'
    GROUP BY OWNER,TABLESPACE_NAME ORDER BY OWNER;
    will give this result
    OWNER | TABLESPACE_NAME| Allocated Size in MB
    30026882 | DATA_TS1 | 170.9375
    30042534 | DATA_TS1 | 0.1875
    myself | DATA_TS1 | 106951.875That's showing you the space already being used. The quotas for each user are obviously at least that large, but the query above doesn't say anything more about quotas. Query dba_ts_quotas to see the quota information.
    now how can i just increase quota for 'myself'?
    Can this be done? and if so can you plz provide me with syntax?
    ALTER USER myself    QUOTA x M    ON data_ts1;where x is the new number of megabytes.
    There is no way to guarantee that other users won't use the newly created space if they have sufficiently large quotas. If you want to make some space available only to a given user, then you need a tablespace where nobody except that user has a quota.

  • ML wiki - increase upload file size

    Hi I would like to increase the max file size I can attach to a wiki. Apparently you used to be able to use Admin server. Is it possible to change in Mountain Lion?
    thanks

    https://help.apple.com/advancedserveradmin/mac/10.8/#apd59153f0a-7ed3-4c64-9c74- 3a1fff831475

  • Configuration IIS to increase upload size limit

    When I am upload larger than 30mb file to Vibe, it show HTTP 404 and the page cannot be displayed.
    I am check the vibe documents know that that need configuring IIS to allow uploading of large files to the vibe site
    However, I don't understand the instruction on this article
    For information about how to configure IIS to allow you to upload large files, see article 925083 in the
    Microsoft Support Knowledgebase (http://support.microsoft.com/kb/925083).
    Firstly I can't locate the Web.config file. By default folder is Inetpub\wwwroot\wss\VirtualDirectories\VirtualDire ctoryFolder
    If I follow vibe installation guide to setup, virutalDirectoryFolder should be under C:\Program Files\Novell\Vibe IIS Plugin. But I can't find any Web.config file. Cloud you help.
    Thanks

    yuenc,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Increase upload limit

    Hi,
    I have a code which will upload data to tables, the problem what i am facing here is it uploads only 15 rows data it is not allowing to take more then that if i try to upload it will not happen only 15 rows of data i will be able to see
    this is the code i am using , Please let me know wht to modify in the code every thing is working fine please suggest.
    DECLARE
    L_RECORD_SEPARATOR VARCHAR2(2):=CHR(100)||CHR(100);
    L_TEMP NUMBER;
    L_BLOB BLOB;
    L_LAST NUMBER;
    L_CURRENT NUMBER;
    L_REC_NO NUMBER:= 0 ;
    L_RECORD VARCHAR2(30000);
    L_ARRAY wwv_flow_global.vc_arr2;
    TEMP NUMBER;
    L_USER VARCHAR2(500);
    v_inid varchar(1000);
    v_proid varchar2(3000);
    v_objid varchar2(500);
    v_objjid varchar2(500);
    v_dateid varchar2(500);
    q varchar2(4000) := 'null';
    v_comments varchar2(4000);
    l_sql varchar2(600) := 'null';
    temp_id number;
    BEGIN
    insert into Dashboard_xls(id,name,blob_content,mime_type)values
    ((select id from wwv_flow_files where name = :P60_UPLOAD),:P60_UPLOAD,(select
    blob_content from wwv_flow_files where name = :P60_UPLOAD)
    ,(select mime_type from wwv_flow_files where name = :P60_UPLOAD));
    commit;
    SELECT blob_content INTO L_BLOB FROM Dashboard_xls WHERE ID=(SELECT MAX(ID) FROM Dashboard_xls);
    SELECT id INTO temp_id FROM Dashboard_xls WHERE ID=(SELECT MAX(ID) FROM Dashboard_xls);
    IF(NVL(DBMS_LOB.INSTR(L_BLOB,UTL_RAW.CAST_TO_RAW(L_RECORD_SEPARATOR),1,1),0)=0) THEN
    L_RECORD_SEPARATOR:=CHR(100);
    END IF;
    L_LAST:=1;
    LOOP
    L_REC_NO:=L_REC_NO+1;
    L_CURRENT:=DBMS_LOB.INSTR(L_BLOB,UTL_RAW.CAST_TO_RAW(L_RECORD_SEPARATOR),L_LAST,1);
    EXIT WHEN(NVL(L_CURRENT,0)=0);
    L_RECORD:=UTL_RAW.CAST_TO_VARCHAR2(DBMS_LOB.SUBSTR(L_BLOB,L_CURRENT,L_LAST));
    L_ARRAY:=WWV_FLOW_UTILITIES.STRING_TO_TABLE(L_RECORD,',');
    HTP.P('ERROR'||L_ARRAY(1));
    IF L_REC_NO <> 1 THEN
    BEGIN
    IF :BUSINESS_UNIT = 'ORACLE IS' THEN
    BEGIN
    INSERT INTO sudhir_initial
    PROJECT_NAME,
    OBJECT_NAME,
    INCOMMING_DOC,
    DESIGN,
    DESIGN_REVIEW,
    DESIGN_REWORK,
    BUILD,
    BUILD_REVIEW,
    BUILD_REWORK,
    TEST_CASE_PREP,
    TEST_CASE_REVIEW,
    TEST_CASE_REWORK,
    INSTALLATION_SCRIPT,
    UNIT_TESTING,
    WAIT_TIME,
    COMMENTS,
    INITIAL_DATE,
    TEST_RESULT_REVIEW,
    RELEASE_REVIEW,
    EXTERNAL_REWORK,
    POBJ_ID,
    FDD_REVIEW,
    FDD_REWORK,
    FUNC_DESIGN,
    CREATED_BY
    VALUES
    :p1_projects,
    L_ARRAY(2),
    L_ARRAY(3),
    L_ARRAY(4),
    L_ARRAY(5),
    L_ARRAY(6),
    L_ARRAY(7),
    L_ARRAY(8),
    L_ARRAY(9),
    L_ARRAY(10),
    L_ARRAY(11),
    L_ARRAY(12),
    L_ARRAY(15),
    L_ARRAY(13),
    L_ARRAY(17),
    L_ARRAY(19),
    sysdate,
    L_ARRAY(14),
    L_ARRAY(16),
    L_ARRAY(18),
    L_ARRAY(20),
    0,
    0,
    0,
    :app_user
    INSERT INTO sudhir_replan
    PROJECT_NAME,
    OBJECT_NAME,
    INCOMMING_DOC,
    DESIGN,
    DESIGN_REVIEW,
    DESIGN_REWORK,
    BUILD,
    BUILD_REVIEW,
    BUILD_REWORK,
    TEST_CASE_PREP,
    TEST_CASE_REVIEW,
    TEST_CASE_REWORK,
    INSTALLATION_SCRIPT,
    UNIT_TESTING,
    WAIT_TIME,
    COMMENTS,
    INITIAL_DATE,
    REASON,
    TEST_RESULT_REVIEW,
    RELEASE_REVIEW,
    EXTERNAL_REWORK,
    POBJ_ID,
    FDD_REVIEW,
    FDD_REWORK,
    FUNC_DESIGN,
    CREATED_BY,
    UPDATED_BY
    VALUES
    :p1_projects,
    L_ARRAY(2),
    L_ARRAY(3),
    L_ARRAY(4),
    L_ARRAY(5),
    L_ARRAY(6),
    L_ARRAY(7),
    L_ARRAY(8),
    L_ARRAY(9),
    L_ARRAY(10),
    L_ARRAY(11),
    L_ARRAY(12),
    L_ARRAY(15),
    L_ARRAY(13),
    L_ARRAY(17),
    L_ARRAY(19),
    sysdate,
    null,
    L_ARRAY(14),
    L_ARRAY(16),
    L_ARRAY(18),
    L_ARRAY(20),
    0,
    0,
    0,
    :app_user,
    null
    END;
    END IF ;
    END;
    END IF;
    L_LAST:=L_CURRENT+LENGTH(L_RECORD_SEPARATOR);
    END LOOP;
    END;
    The error if I try to upload more then 15 rows i get ORA-01722: invalid number, it is less then or equal to 15 i wont get any error
    Thanks
    Sudhir
    Edited by: Sudhir_N on Dec 3, 2008 4:33 AM

    You either have a data error or you are trying to insert a non-numeric value into a column which only contains numeric values. This is usually caused by relying on implicit conversions, which work 95% of the time.
    Wherever you are entering a date to a date_column make sure that you use an explicit conversion.
    Check the data, ie the first 15 rows are obviously ok. Check your data for data for the next 15 rows.

  • Uploading of Quota arrangement using LSMW

    Dear Members,
    I want to upload Quota arrangement using LSMW.
    Pl advise.
    Thanks & Regards,
    Sanjay Kohli

    I am trying to upload quota arrangement using IDOC method, since there is no Standard/Batch Input Method as well as Bussiness object method available for it.
    I am not using Batch input recording method since no of vendors will varies depending on the plant & material comination.
    I am unable to load it using IDOC as I not able to identify process code for I DOC message Type LIPEQU.
    I slhall be thakful in case you can provide the same or alternative method to upload Quota arrangement in addition to Batch Input recording.
    Regards,
    Sanjay Kohli

  • Quota upload

    Gurus
      We went live and  payroll Ran from April2011 to  sep2011.(With Hiring dates from 01.01.1990)
        Now we want to upload Quota From 01.10.2011
      Changed date in table  VV_T569R_V2
      updated infotype 2013 correction  on 01.10.2011 
    But when i run PT60 getting below error. Kindly advise me in this.
    Error entry no. 83 Error when creating absence quota
    Change in earliest retroactive accounting date time not possible
    Kindly advise me in this.
    Edited by: HRSAP2011 on Oct 7, 2011 10:20 AM

    Hi  Raghu
      We just went live by running April2011-Sep2011 without any Quota (With unpaid Absences)
      Now from 01.10.2011 We want to upload the quota which they have in their legacy system.
    For that i have changed date as 01.10.2011 in table VV_T569R_V2.
    Then i have uploaded Quotas in IT2013 with date as  01.01.2011
    When i run PT60 with evaluation upto 01.01.2011  error is appearing.
    Note : Configutations seems to be fine. When i change date  as 01.01.1990 in table VV_T569R_V2 then PT60 is running.

  • How do I increase or decrease the quote level when editing a message?

    When replying to a message, I often like to intersperse my responses with the relevant sections of the original message. When I try to do that in Thunderbird, it extends the quote line way above the quoted text. There appears to be no way to delete the "excess" section of the quote line without removing the quote line entirely.
    Also, when there are two previous messages in a thread, there is only one quote line next to both. I cannot find any setting, nor any manual way of increasing the quote level of the original message.

    this add-on might do it for you https://nic-nac-project.org/~kaosmos/quoteandcomposemanager-en.html

  • Quota Increase on StIN_PERF-TRF_ERM

    Hi Beehive Support,
    Could you please increase the quota on StIN_PERF-TRF_ERM to 2GB, as we've customers using this space actively and project moving into Construction phase will warrant an increased usage.
    Regards,
    Gautam

    [email protected] is in the STIN_PERF group and looks OK to me . Has he tried using a different browser ?
    WebDAV access can smetimes throw up the username password box multiple times - I found adding a # at the end of the string helps, i.e. https://beehiveonline.oracle.com/content/dav/#
    Phil

  • Does increasing Exchange Storgage Quota use more disk space immediately?

    Exchange does not use the space immediately, it just allows each mailbox to grow up to that size.
    I would consider carefully before increasing the quota limit. One of the reasons for having a quota is to keep mailboxes to a manageable size. Every GB of size costs a heck of a lot more than just the GB on the spindle.

    Hi
    The current policy is a 20Gb limit. Thanks to a post I made in this forum, I know that 21 of the users are nearing this limit.
    Now I can increase the limit for those 21. Or I can change the policy to 25Gb for everyone. If I increase it to 25Gb for everyone, does Exchange use the disk space immediately? Lets say I had 1000 Gb free, and 150 users. Does increasing by 5Gb mean that 5x150 = 750Gb is now allocated? Or does exchange use the disk space as required?
    Thanks
    This topic first appeared in the Spiceworks Community

  • Revel Error Message: "Some files could not be uploaded."

    Error Message: "Some files could not be uploaded. 1 file was unable to be uploaded and was skipped." I am a Revel user from its inception. I have never had upload errors before in Adobe Revel. I am trying to upload jpeg files in the same way I have done for months, which is by dragging and dropping files directly into an album I have created. Starting yesterday, only some files upload properly. Others receive the above error message. When I have tried to re-upload the jpegs which have not gone, I receive either the same error message or a slightly different error which indicates the files are not uploading because they are duplicates. They're not duplicates and appear nowhere else in my Revel albums. I have rebooted my Window 7 PC, I have repeatedly logged out and back into Revel. I have tried both Firefox and IE. I have tried creating new albums and uploading the failed files to a new album. I have cleared my Firefox cache. I have tried both the "drag and drop" feature and the "Add Photos or Videos" button in Revel. I have tried using the "Export to Revel" feature in Adobe Photoshop Elements 11. I have tried uploading never-before-attempted files, and - on average - only 25% of those brand-new files are uploading. I am a subscriber and pay for the Revel service, so I am not bumping into any upload quotas. I have read through these forums and have found problems similar to mine as far back as May 2013, but none of the problems ever seem to have been resolved other than the users simply giving up. Can you help? I am becoming increasingly confused with respect to which files have succeeded and which files have failed. Thank you. -Dori

    Yvonne-
    You can have many libraries with many albums and files within them. Each library is independent, so if you upload a file to two libraries then you two copies. If you put a photo from a library in albums that live within that library, then there is only one copy in the library that each album has access to so it will show up when you view the album. This might help : http://forums.adobe.com/message/5197228#5197228.
    I found a few incomplete files in your account also. We will take care of this for you and contact you when it is complete.
    Pattie
    Some of these links might also be useful to you:
    Revel FAQ’s:
    http://forums.adobe.com/community/revel/faq
    especially:
    FAQ: Where can I learn tips and tricks about Revel? http://forums.adobe.com/message/5798092#5798092
    FAQ: How do I share my photos in Revel? http://forums.adobe.com/thread/1295026
    FAQ: How do I add (upload) files to revel? http://forums.adobe.com/thread/1162795?tstart=0

Maybe you are looking for