InDesign Quit while running the script

Hi guys,
Create A new document with one page of content as " ;" then run this below script.
while running the below script in InDesign CS3 5.0.4 (Windows),  Suddenly Application has been closed.
if(app.documents.length == 0)
            alert("No Documents are Open...");
        else
app.findTextPreferences = null;
app.changeTextPreferences = null;
app.findChangeTextOptions.wholeWord = false;
app.findChangeTextOptions.caseSensitive = false;
app.findChangeTextOptions.includeMasterPages = false;
app.findTextPreferences.findWhat = " ;";
app.documents.item(0).findText();
app.changeTextPreferences.changeTo= "<2009>; ";
app.documents.item(0).changeText();
Anyone help me, Where the errors occured????
thanks,
Nagaraj

Nagaraj1983 wrote:
There is no Plug-in has been installed..!!!!
You didn't understand me.
I'm telling you to install one!
Here's a very nice one to have:
http://www.dtptools.com/product.asp?id=ksin
Try installing this plugin and then running your script.

Similar Messages

  • Why MicroSoft 2000 SR needed while running the script using test manager???

    hi all,
    whenever I trying to run a script using test manager,one POP-UP comes which starts installing MICROSOFT 2000 SR.
    and in few seconds it complaining for some missing component,
    can any body tell me why it is happening.
    what is the need of Microsoft 2000 SR while running the script in test manager.
    tnx
    USOni

    USoni
    I have seen that problem happening before, even that i was never able to figure out why, something that you can try is changing the service log in credentials for both:
    Oracle Application Testing Suite Agent Service
    Oracle Application Testing Suite Application Service
    and use a proper user with admin rights.
    let me know if that helped
    Regards
    Alex

  • How to find the missing fonts while running the script?

    hi,
    I need to create a script to find the missing font. not only for that. Actually i created a script to read the file properties. but i have a problem while running the script.
    I have put "User Interation Level" to never interact. Even i need to check wheather each file have "missing fonts". mean time i never stop the script.
    Is It Possible???
    Regards,
    SubhaOviya

    Here's a shot of the Find Font Dialog:
    Papyrus (highlighted in the list) is missing, and there's a yellow warning triangle to show that. Fonts that ar not missing have an icon to show the type of font. You'll also see it shown as missing in the "Info" box at the bottom of the dialog.
    If you use the Replace With dropdown you will only see fonts listed that are installed on the system. In order to actually use the missing font, rather than substitute a different font in its place, you must obtain and install the missing font on the system.
    Are you seeing something different when you open Find Font?

  • Data access error while running  the script in fdm workbench script editor

    Hello Experts,
    I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                              -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
    Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
    Thanks in advance...

    Hi,
    Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
    Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
    Suggest your valuable suggestion's
    Thanks in advance...
    I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

  • Error while running the script

    Hi all,
    when i try to run a script in oracle it is failing throwing the error
    'ORA-00913: too many values
    ORA-06512: at "scema_name.procedure_name", line 229
    ORA-06512: at line 1"
    please help me out....
    Thanks in advance
    Ismail

    I think the procedure can accept only one value & u r trying to fetch more than 1 value , that's y problem occur . u've to use
    1)cursor for resolving this problem
    or
    2)write an exception
    exception
    When TOO_MANY_ROWS Then
    --Code                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to avoid missing font dialog box(alert) while running the script??

    Hi....
         In Illustrator CS4 ,I tried to skip missing font dialog box(alert box) by using the following  script .But,I could not skip the dialog box
    So if you have any suggestion about this let  me know..
    tell application "Finder"
      set user interaction level to never interact
        activate
        set fileName to (path to desktop folder as string) & "fer11757_f1208.eps"
        --set user interaction level to never interact
        --    set user interaction level of script preferences to never interact
        open file fileName
        --set alert missing fonts to true
        set user interaction level to never interact
        activate
    end tell
    display dialog ("completed")
    end tell
    Thanks,
    Mubeen

    Does this NOT error when run? Your target application here is 'Finder' Apple's system file browser and you are giving it Adobe illustrator commands?
    Im not 100% about the versioning with Illustrator installs I think they are all just…
    Tell application "Adobe Illustrator" -- No CS Versioning?
         -- do stuff here
    end tell
    you could check by just picking the app from this list
    choose application

  • Error while running the script ValidateRollup

    STACK TRACE
    TXK::Error::abort('TXK::Error', 'HASH(0x815eae0)') called at /data/apps/clone/5985992/fnd/perl/TXK/Common.pm line 299 TXK::Common::doError('TXK::SQLPLUS=HASH(0x8c3240c)', 'SQLPLUS error: buffer=^J^JSQL*Plus: Release 8.0.6.0.0 - Production...', undef) called at /data/apps/clone/5985992/fnd/perl/TXK/Common.pm line 314
    TXK::Common::setError('TXK::SQLPLUS=HASH(0x8c3240c)', 'SQLPLUS error: buffer=^J^JSQL*Plus: Release 8.0.6.0.0 - Production...') called at /data/apps/clone/5985992/fnd/perl/TXK/SQLPLUS.pm line 832
    TXK::SQLPLUS::_doExecute('TXK::SQLPLUS=HASH(0x8c3240c)', 0) called at /data/apps/clone/5985992/fnd/perl/TXK/SQLPLUS.pm line 234
    TXK::SQLPLUS::execute('TXK::SQLPLUS=HASH(0x8c3240c)', 'HASH(0x8cfbe4c)') called at /data/apps/clone/5985992/fnd/perl/TXK/TechstackDB.pm line 601
    TXK::TechstackDB::_getSQLValue('TXK::TechstackDB=HASH(0x8784b3c)', 'SELECT lower(node_name)||\'.\'||lower(domain)||\',\' FROM fnd_no...') called at /data/apps/clone/5985992/fnd/perl/TXK/TechstackDB.pm line 565
    TXK::TechstackDB::getSQLValue('TXK::TechstackDB=HASH(0x8784b3c)', 'SELECT lower(node_name)||\'.\'||lower(domain)||\',\' FROM fnd_no...') called at /data/apps/clone/5985992/fnd/perl/TXK/Validate.pm line 3235
    97,0-1 91%

    Do a which perl. Are you using the iAS/Apache/perl/bin version?
    What is your OS?

  • IDCS5-win. Error while running a script from indesign(not via estk)

    Hi all,
    After running the script from indesign, I get following error
    ASSERT '(engine->getDebugFlags() & ScScript::kExtendedErrors) == ScScript::kExtendedErrors' in ..\..\..\source\components\script\javascript\JavaScriptRunner.cpp at line 412 failed.
    ..\..\..\source\components\script\javascript\JavaScriptRunner.cpp (412)
    any idea about this?
    The script runs fine when run from ES tool kit.
    Thanks

    Hi,
    My colleague found the problem. We were using extendables library and we still haven't figured out what was actually happening, but removing it solved the problem.

  • Error while running the ant script of fusion order demo -Infrastructure.jws

    Hi All,
    I was trying to run the store front application.
    As i was trying to run the scripts to create the tables, stored procedure, schemas etc, the execution of the ant script failed with the following error:
    The apache Ant log reads as follows:
    *[echo] USER_CONTEXT Package Created*
    compileImagesApp:
    *[javac] Compiling 3 source files to D:\11g\ADF-11g\FusionOrderDemo_R1PS1\Infrastructure\DBSchema\classes*
    BUILD FAILED
    D:\11g\ADF-11g\FusionOrderDemo_R1PS1\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
    D:\11g\ADF-11g\FusionOrderDemo_R1PS1\Infrastructure\DBSchema\build.xml:312: D:\Jdev11g\oracle_common\modules\oracle.javacache_11.1.1 not found.
    Total time: 2 minutes 26 seconds
    I ignored the above error and when i tried to run the StoreFrontUI project, i was unable to see the images rendered on the User Interface.
    Can anybody help me as to why this would have happened?
    Is it not getting rendered because the ant script failed @ compileImagesApp? If so, what is the solution for the same?
    Thanks in Advance,
    Vijay

    Hi,
    Even after commenting and uncommenting the path for the imageurl variable in the ImageLoaderServiceAMImpl.java, i am getting the following error when trying to build the schema from the MasterbuildScript Project:
    compileImagesApp:
    *[javac] Compiling 3 source files to D:\11g\adf-Handson\FOD_11\Infrastructure\DBSchema\classes*
    BUILD FAILED
    D:\11g\adf-Handson\FOD_11\Infrastructure\Ant\build.xml:52: The following error occurred while executing this line:
    D:\11g\adf-Handson\FOD_11\Infrastructure\DBSchema\build.xml:262: D:\Jdev11g\jdeveloper\modules\oracle.xdk_11.1.1 not found.
    Total time: 59 seconds
    One more observation when i was changing the path in the ImageLoaderServiceAMImpl.java was that, there were lot many errors that were shown in the file:
    Following import statements were erroring out:
    import oracle.jbo.Row;
    import oracle.jbo.ViewObject;
    import oracle.jbo.domain.BlobDomain;
    import oracle.jbo.domain.DBSequence;
    import oracle.jbo.domain.Timestamp;
    import oracle.jbo.domain.Number;
    import oracle.jbo.server.ApplicationModuleImpl;
    import oracle.jbo.server.ViewObjectImpl;
    Can you please provide some pointers on this as well?
    Regards,
    Vijay Swaminathan

  • DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel

    DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel source on DB2.
    Below is the the log details:
    2021 2012-11-08 03:23:46 2012-11-08 03:25:56 -0700 0000002a 001 003f 0001 09 ddlimp 604 736 C:\OBIA\Upgrade\CTLFiles\DDL_.log
    ContextInit     ContextInit     0     0     2012-11-08 03:23:46     Message Facility failed to init. Siebel Root: C:\DAC\client\utilities
    Trace     Trace     3     0     2012-11-08 03:23:46     Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
    Trace     Trace     3     0     2012-11-08 03:23:46     Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
    Trace     Trace     3     0     2012-11-08 03:23:46     
    This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
    San Mateo, CA 94404.
    User agrees that any use of this software is governed by: (1) the applicable
    user limitations and other terms and conditions of the license agreement which
    has been entered into with Siebel Systems or its authorized distributors; and
    (2) the proprietary and restricted rights notices included in this software.
    WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
    UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
    OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
    PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
    If you have received this software in error, please notify Siebel Systems
    immediately at (650) 295-5000.
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:46     ddlimp /U SIEBEL /P ***** /C siebel /G SSE_ROLE /F C:\OBIA\Upgrade\CTLFiles\DDL_OLTP.CTL /L C:\OBIA\Upgrade\CTLFiles\DDL_
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:46     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:46     Connecting to the database...
    DBCLog     DBCLogError     1     0     2012-11-08 03:23:52     SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
    DBCLog     DBCLogError     1     0     2012-11-08 03:23:52     SQL Warning, SQL State ”, 40042692, CLog     DBCLogError     1     0     2012-11-08 03:23:52     SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Connected.
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Reading tables and indexes from DDL file...
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Read 522 tables and 1084 indexes from DDL file...
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Reading existing schema...
    SARMLog     SARMInformation     3     0     2012-11-08 03:23:52     SARM is OFF -change param SARMLevel to enable
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Read 0 tablespaces, 6137 tables and 24846 indexes from existing schema...
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Running SQL statements against the database...
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Merging table S_ETL_COSTLST ...
    SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
    alter table S_ETL_COSTLST modify
    CONFLICT_ID varchar(15)
    DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
    SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
    alter table S_ETL_COSTLST modify
    CONFLICT_ID varchar(15)
    DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
    SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
    alter table S_ETL_COSTLST modify
    CONFLICT_ID default '0'
    DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     37000: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
    SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
    alter table S_ETL_COSTLST modify
    CONFLICT_ID default '0'
    DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     56098: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     alter table S_ETL_COSTLST modify
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     CONFLICT_ID default '0'
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     ;
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     writeExecDDL error (UTLOdbcExecDirectDDL pDDLSql).
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     writeExecDDL error (UTLDbDdlColModify).
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Error in MainFunction (UTLDbDdlDbMerge).
    SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Error in Main function...
    GenericLog     GenericError     1     0     2012-11-08 03:25:56     (logapi.cpp (167) err=1 sys=126) SBL-GEN-00001: (logapi.cpp: 167) error code = 1, system error = 126, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)

    If you run DAC on a 64-bit windows Operating System, you must create the ODBC data source using the ODBC Administrator tool in %windir%\SysWOW64\odbcad32.exe. for creating the data warehouse tables.
    If helps pls mark

  • While  running open script software i am getting issue of script exception occured . an unexpected exception occured in the script.script section unspecified.

    while  running open script software i am getting issue of script exception occured . an unexpected exception occured in the script.script section unspecified.
    i am using software version 12.5.0.1

    while  running open script software i am getting issue of script exception occured . an unexpected exception occured in the script.script section unspecified.
    i am using software version 12.5.0.1

  • Error while running the root.sh script during Grid installation on a pre-installed 11g database .

    Hi Oracle Experts,
    I am trying to setup a new GRID Standalone Infrastructure on a previously installed Oracle 11g database.
    It runs all fine but when prompts to run the root.sh script it does not allow to proceed as it prompts to overwrite the existing path for /usr/bin/local
    well, I google'd and tried with overwrite : Y . It prompted to run the script but it failed ...
    Could you please help me on this ..
    [root@asm ~]# /u01/app/11.2.0/grid/root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
        ORACLE_OWNER= oracle
        ORACLE_HOME=  /u01/app/11.2.0/grid
    Enter the full pathname of the local bin directory: [/usr/local/bin]:
    The file "dbhome" already exists in /usr/local/bin.  Overwrite it? (y/n)
    [n]: y
       Copying dbhome to /usr/local/bin ...
    The file "oraenv" already exists in /usr/local/bin.  Overwrite it? (y/n)
    [n]: y
       Copying oraenv to /usr/local/bin ...
    The file "coraenv" already exists in /usr/local/bin.  Overwrite it? (y/n)
    [n]: y
       Copying coraenv to /usr/local/bin ...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    To configure Grid Infrastructure for a Stand-Alone Server run the following command as the root user:
    /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/roothas.pl
    [root@asm ~]# /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/                              crs/install/roothas.pl
    2015-03-18 01:42:25: Checking for super user privileges
    2015-03-18 01:42:25: User has super user privileges
    2015-03-18 01:42:25: Parsing the host name
    Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'oracle', privgrp 'oinstall'..
    Operation successful.
    CRS-4664: Node asm successfully pinned.
    Adding daemon to inittab
    CRS-4123: Oracle High Availability Services has been started.
    ohasd is starting
    acfsroot: ACFS-9320: Missing advmutil.
    acfsroot: ACFS-9320: Missing advmutil.bin.
    acfsroot: ACFS-9320: Missing fsck.acfs.
    acfsroot: ACFS-9320: Missing fsck.acfs.bin.
    acfsroot: ACFS-9320: Missing mkfs.acfs.
    acfsroot: ACFS-9320: Missing mkfs.acfs.bin.
    acfsroot: ACFS-9320: Missing mount.acfs.
    acfsroot: ACFS-9320: Missing mount.acfs.bin.
    acfsroot: ACFS-9320: Missing acfsdbg.
    acfsroot: ACFS-9320: Missing acfsdbg.bin.
    acfsroot: ACFS-9320: Missing acfsutil.
    acfsroot: ACFS-9320: Missing acfsutil.bin.
    acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed:
    acfsroot: ACFS-9302: No installation files found at /u01/app/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5xen-x86_64/bin.
    asm     2015/03/18 01:43:06     /u01/app/11.2.0/grid/cdata/asm/backup_20150318_014306.olr
    Successfully configured Oracle Grid Infrastructure for a Standalone Server
    when I checked for ASM instance its not running ... but just ohasd service and nothing else ..
    [root@asm grid]# ps -ef | grep pmon
    oracle    5831     1  0 01:15 ?        00:00:01 ora_pmon_db11g1
    root     12625  8794  0 02:30 pts/2    00:00:00 grep pmon
    [root@asm grid]#
    [root@asm grid]#
    [root@asm grid]# ps -ef | grep d.bin
    oracle   12643     1  5 02:30 ?        00:00:00 /u01/app/11.2.0/grid/bin/ohasd.bin reboot
    root     12715  8794  0 02:30 pts/2    00:00:00 grep d.bin
    [root@asm grid]#
    Could you please help .

    hi,
    The issue not with /usr/bin/local.  When you excute root.sh, it will try configure the ASM with New GRID HOME. Issue started, whent tried to start
    CRS-4123: Oracle High Availability Services has been started.
    ohasd is starting <<=================================================================
    acfsroot: ACFS-9320: Missing advmutil.
    Please let us know the below details
    ==> Acfs is configured the servers??
         ==>acfsutil registry
                   acfsutil info fs output.
    ==> With out ASM instance , How the database, CRS STarted ???
    ==> Please try stop and start the crs.
    ==> crsctl query crs activeversion output
    Regards
    Krishnan

  • Error while executing the script adgetlnxver.sh

    Error while executing the script adgetlnxver.sh on apps&db tier during upgrade from 11.5.9 to 11.5.10.2
    -bash: [: -lt: unary operator expected
    [aptinst@dba5 TINST_dba5]$ sh adapcctl.sh restart
    adapcctl.sh version 115.55
    /u01/app/tinst/tinstappl/ad/11.5.0/bin/adgetlnxver.sh: line 123: [: -lt: unary operator expected
    Apache Web Server Listener :httpd ( pid 8645 ) is running.
    Restarting the Apache Web Server Dedicated HTTP Listener..
    Apache Web Server Listener (PLSQL) :httpd ( pid 8673 ) is running.
    Restarting the Apache Web Server Dedicated PLSQL Listener..
    adapcctl.sh: exiting with status 0
    In adgetlnxver.sh: line 123 says
    if [ ${setflag}x = "x" -a $os = "RH" ]; then
    redhatver=`grep -oP "Enterprise Linux [a-z A-Z 0-9]* release [0-9]+" /etc/redhat-release | sed 's/Enterprise Linux [a-z A-Z 0-9]* release //g'`
    if [ $redhatver -lt 5 ]; then
    LD_ASSUME_KERNEL="2.4.19"
    export LD_ASSUME_KERNEL
    fi
    fi
    Thanks,
    Vamsi

    Hi Vamsi.
    The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
    Can you read this note and apply solution? The note refers a patch, but the problem is the same.
    After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
    BR Rafael Ceolim

  • Error while running the createvw.dms

    Hi,
    I am installing the peoplesoft HRMS with system data for the production. While running the createvw.dms script I am getting the following error.
    File: e:\pt849-903-R1-retail\peopletools\SRC\pssys\rdmget.cppSQL error. Stmt #: 1532 Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    Failed SQL stmt:SELECT VERSION, FIELDCOUNT, RECTYPE, RECUSE, OPTTRIGFLAG, AUDITRECNAME, SETCNTRLFLD, RELLANGRECNAME, OPTDELRECNAME, PARENTRECNAME, QRYSECRECNAME, SQLTABLENAME, BUILDSEQNO, OBJECTOWNERID, TO_CHAR(CAST((LASTUPDDTTM) AS TIMESTAMP),'YYYY-MM-DD-HH24.MI.SS.FF'), LASTUPDOPRID, SYSTEMIDFIELDNAME, TIMESTAMPFIELDNAME, RECDESCR, AUXFLAGMASK, DESCRLONG FROM PSRECDEFN WHERE RECNAME = :1
    Please help.
    Thanks,
    Partha

    Hi Nicholas,
    Thanks for the reply. I am installing Peoplesoft HCM 9.0 on Windows 2003 server, with Oracle 10g release 1.
    I ran the script logged in as PS and got errors, and then logged in as SYSADM and got the error that I have sent.
    Apart from that these are the errors in the script.
    Views remaining: 5300
    Creating View SRVCINDALLVWLNG
    - SQL Error. Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    CREATE VIEW PS_SRVCINDALLVWLNG (EMPLID, SRVC_IND_DTTM, LANGUAGE_CD, DESCR, DESCR1, DESCR2, DESCR3, DESCRLONG) AS SELECT A.EMPLID , A.SRVC_IND_DTTM , B2.LANGUAGE_CD , B2.DESCR , C2.DESCR , D.DESCR , E2.DESCR , X.DESCRLONG FROM PS_SRVC_IN_RSN_LNG X , PS_INSTITUTION_TBL B , PS_SRVC_IND_CD_TBL C , PS_DEPT_TBL E , PS_SRVC_IND_DATA A LEFT OUTER JOIN PS_EMAIL_ADDRESSES F ON A.CONTACT_ID = F.EMPLID AND F.PREF_EMAIL_FLAG = 'Y' LEFT OUTER JOIN PS_TERM_VAL_LANG D ON A.SRVC_IND_ACT_TERM = D.STRM , PS_INSTITUTION_LNG B2 , PS_SRVC_IND_CD_LNG C2 , PS_DEPT_TBL_LANG E2 WHERE A.SRVC_IND_ACTIVE_DT <= TO_DATE(TO_CHAR(SYSDATE,'YYYY-MM-DD'),'YYYY-MM-DD') AND A.INSTITUTION = B.INSTITUTION AND B.EFF_STATUS = 'A' AND B.EFFDT = ( SELECT MAX(B1.EFFDT) FROM PS_INSTITUTION_TBL B1 WHERE B1.INSTITUTION = A.INSTITUTION AND B1.EFFDT <= TO_DATE(TO_CHAR(SYSDATE,'YYYY-MM-DD'),'YYYY-MM-DD')) AND A.SRVC_IND_CD = C.SRVC_IND_CD AND A.INSTITUTION = C.INSTITUTION AND C.EFF_STATUS = '
    Error: Unable to process create statement for SRVCINDALLVWLNG
    Views remaining: 5299
    File: e:\pt849-903-R1-retail\peopletools\SRC\pssys\rdmget.cppSQL error. Stmt #: 1532 Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    Failed SQL stmt:SELECT VERSION, FIELDCOUNT, RECTYPE, RECUSE, OPTTRIGFLAG, AUDITRECNAME, SETCNTRLFLD, RELLANGRECNAME, OPTDELRECNAME, PARENTRECNAME, QRYSECRECNAME, SQLTABLENAME, BUILDSEQNO, OBJECTOWNERID, TO_CHAR(CAST((LASTUPDDTTM) AS TIMESTAMP),'YYYY-MM-DD-HH24.MI.SS.FF'), LASTUPDOPRID, SYSTEMIDFIELDNAME, TIMESTAMPFIELDNAME, RECDESCR, AUXFLAGMASK, DESCRLONG FROM PSRECDEFN WHERE RECNAME = :1
    SRVCINDBOTHVWLN not found in Application Designer
    Creating View SRVCINDHOLDVWLN
    - SQL Error. Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    CREATE VIEW PS_SRVCINDHOLDVWLN (EMPLID, SRVC_IND_DTTM, LANGUAGE_CD, DESCR, DESCR1, DESCR2, DESCR3, DESCRLONG) AS SELECT A.EMPLID , A.SRVC_IND_DTTM , B2.LANGUAGE_CD , B2.DESCR , C2.DESCR , D.DESCR , E2.DESCR , X.DESCRLONG FROM PS_SRVC_IN_RSN_LNG X , PS_INSTITUTION_TBL B , PS_SRVC_IND_CD_TBL C , PS_DEPT_TBL E , PS_SRVC_IND_DATA A LEFT OUTER JOIN PS_EMAIL_ADDRESSES F ON A.CONTACT_ID = F.EMPLID AND F.PREF_EMAIL_FLAG = 'Y' LEFT OUTER JOIN PS_TERM_VAL_LANG D ON A.SRVC_IND_ACT_TERM = D.STRM , PS_INSTITUTION_LNG B2 , PS_SRVC_IND_CD_LNG C2 , PS_DEPT_TBL_LANG E2 WHERE A.POS_SRVC_INDICATOR = 'N' AND A.SRVC_IND_ACTIVE_DT <= TO_DATE(TO_CHAR(SYSDATE,'YYYY-MM-DD'),'YYYY-MM-DD') AND A.INSTITUTION = B.INSTITUTION AND B.EFF_STATUS = 'A' AND B.EFFDT = ( SELECT MAX(B1.EFFDT) FROM PS_INSTITUTION_TBL B1 WHERE B1.INSTITUTION = A.INSTITUTION AND B1.EFFDT <= TO_DATE(TO_CHAR(SYSDATE,'YYYY-MM-DD'),'YYYY-MM-DD')) AND A.SRVC_IND_CD = C.SRVC_IND_CD AND A.INSTITUTION = C.I
    Error: Unable to process create statement for SRVCINDHOLDVWLN
    Views remaining: 5297
    File: e:\pt849-903-R1-retail\peopletools\SRC\pssys\rdmget.cppSQL error. Stmt #: 1532 Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    Failed SQL stmt:SELECT VERSION, FIELDCOUNT, RECTYPE, RECUSE, OPTTRIGFLAG, AUDITRECNAME, SETCNTRLFLD, RELLANGRECNAME, OPTDELRECNAME, PARENTRECNAME, QRYSECRECNAME, SQLTABLENAME, BUILDSEQNO, OBJECTOWNERID, TO_CHAR(CAST((LASTUPDDTTM) AS TIMESTAMP),'YYYY-MM-DD-HH24.MI.SS.FF'), LASTUPDOPRID, SYSTEMIDFIELDNAME, TIMESTAMPFIELDNAME, RECDESCR, AUXFLAGMASK, DESCRLONG FROM PSRECDEFN WHERE RECNAME = :1
    SRVCINDRSNVWLNG not found in Application Designer
    Creating View SRVCINDTODOVWLN
    Views remaining: 5295
    Creating View SRVCIND_ALL_VW
    - SQL Error. Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    CREATE VIEW PS_SRVCIND_ALL_VW (EMPLID, SRVC_IND_DTTM, SRVC_IND_ACTIVE_DT, SCC_SI_END_DT, INSTITUTION, DESCR, SRVC_IND_CD, DESCR1, POS_SRVC_INDICATOR, SRVC_IND_REASON, SRVC_IND_ACT_TERM, DESCR2, SCC_SI_END_TERM, DESCR20, DEPTID, DESCR3, CONTACT_ID, CONTACT, EMAIL_ADDR, AMOUNT, CURRENCY_CD, DESCRLONG) AS SELECT A.EMPLID , A.SRVC_IND_DTTM , A.SRVC_IND_ACTIVE_DT , A.SCC_SI_END_DT , A.INSTITUTION , B.DESCR , A.SRVC_IND_CD , C.DESCR , A.POS_SRVC_INDICATOR , A.SRVC_IND_REASON , A.SRVC_IND_ACT_TERM , D.DESCR , A.SCC_SI_END_TERM , SUBSTR(G.DESCR,1,20) , A.DEPTID , E.DESCR , A.CONTACT_ID , A.CONTACT , F.EMAIL_ADDR , A.AMOUNT , A.CURRENCY_CD , X.DESCRLONG FROM PS_SRVC_IN_RSN_TBL X , PS_INSTITUTION_TBL B , PS_SRVC_IND_CD_TBL C , PS_DEPT_TBL E , PS_SRVC_IND_DATA A LEFT OUTER JOIN PS_EMAIL_ADDRESSES F ON A.CONTACT_ID = F.EMPLID AND F.PREF_EMAIL_FLAG = 'Y' LEFT OUTER JOIN PS_TERM_VAL_TBL D ON A.SRVC_IND_ACT_TERM = D.STRM LEFT OUTER JOIN PS_TERM_VAL_TBL G ON
    Error: Unable to process create statement for SRVCIND_ALL_VW
    Views remaining: 5294
    File: e:\pt849-903-R1-retail\peopletools\SRC\pssys\rdmget.cppSQL error. Stmt #: 1532 Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    Failed SQL stmt:SELECT VERSION, FIELDCOUNT, RECTYPE, RECUSE, OPTTRIGFLAG, AUDITRECNAME, SETCNTRLFLD, RELLANGRECNAME, OPTDELRECNAME, PARENTRECNAME, QRYSECRECNAME, SQLTABLENAME, BUILDSEQNO, OBJECTOWNERID, TO_CHAR(CAST((LASTUPDDTTM) AS TIMESTAMP),'YYYY-MM-DD-HH24.MI.SS.FF'), LASTUPDOPRID, SYSTEMIDFIELDNAME, TIMESTAMPFIELDNAME, RECDESCR, AUXFLAGMASK, DESCRLONG FROM PSRECDEFN WHERE RECNAME = :1
    SRVCIND_BOTH_VW not found in Application Designer
    Creating View SRVCIND_HOLD_VW
    - SQL Error. Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    CREATE VIEW PS_SRVCIND_HOLD_VW (EMPLID, SRVC_IND_DTTM, SRVC_IND_ACTIVE_DT, INSTITUTION, DESCR, SRVC_IND_CD, DESCR1, SRVC_IND_REASON, SRVC_IND_ACT_TERM, DESCR2, DEPTID, DESCR3, CONTACT_ID, CONTACT, EMAIL_ADDR, AMOUNT, CURRENCY_CD, DESCRLONG, SCC_SI_END_DT, SCC_SI_END_TERM, DESCR20) AS SELECT A.EMPLID , A.SRVC_IND_DTTM , A.SRVC_IND_ACTIVE_DT , A.INSTITUTION , B.DESCR , A.SRVC_IND_CD , C.DESCR , A.SRVC_IND_REASON , A.SRVC_IND_ACT_TERM , D.DESCR , A.DEPTID , E.DESCR , A.CONTACT_ID , A.CONTACT , F.EMAIL_ADDR , A.AMOUNT , A.CURRENCY_CD , X.DESCRLONG ,A.SCC_SI_END_DT ,A.SCC_SI_END_TERM ,SUBSTR(G.DESCR ,1 ,20) FROM PS_SRVC_IN_RSN_TBL X , PS_INSTITUTION_TBL B , PS_SRVC_IND_CD_TBL C , PS_DEPT_TBL E , PS_SRVC_IND_DATA A LEFT OUTER JOIN PS_EMAIL_ADDRESSES F ON A.CONTACT_ID = F.EMPLID AND F.PREF_EMAIL_FLAG = 'Y' LEFT OUTER JOIN PS_TERM_VAL_TBL D ON A.SRVC_IND_ACT_TERM = D.STRM LEFT OUTER JOIN PS_TERM_VAL_TBL G ON A.SCC_SI_END_TERM = G.STRM WHERE A.INSTITU
    Error: Unable to process create statement for SRVCIND_HOLD_VW
    Views remaining: 5292
    File: e:\pt849-903-R1-retail\peopletools\SRC\pssys\rdmget.cppSQL error. Stmt #: 1532 Error Position: 0 Return: 3114 - ORA-03114: not connected to ORACLE
    Failed SQL stmt:SELECT VERSION, FIELDCOUNT, RECTYPE, RECUSE, OPTTRIGFLAG, AUDITRECNAME, SETCNTRLFLD, RELLANGRECNAME, OPTDELRECNAME, PARENTRECNAME, QRYSECRECNAME, SQLTABLENAME, BUILDSEQNO, OBJECTOWNERID, TO_CHAR(CAST((LASTUPDDTTM) AS TIMESTAMP),'YYYY-MM-DD-HH24.MI.SS.FF'), LASTUPDOPRID, SYSTEMIDFIELDNAME, TIMESTAMPFIELDNAME, RECDESCR, AUXFLAGMASK, DESCRLONG FROM PSRECDEFN WHERE RECNAME = :1
    SRVCIND_TODO_VW not found in Application Designer
    Creating View SRVCINRSNVWLNG
    I am running the script on the server.
    Regards,
    Partha

  • Error while running the initialize service to create a new application

    Hi,
    I tried running the initialze service,when I encountered this error.Can anyone help me whith this.
    Setting EAC provisioning and performing initial setup...
    [03.20.13 23:32:37] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
    [03.20.13 23:32:38] INFO: Setting definition for application 'Endeca'.
    [03.20.13 23:32:38] INFO: Setting definition for host 'AuthoringMDEXHost'.
    [03.20.13 23:32:39] INFO: Setting definition for host 'LiveMDEXHostA'.
    [03.20.13 23:32:39] INFO: Setting definition for host 'ReportGenerationHost'.
    [03.20.13 23:32:39] INFO: Setting definition for host 'WorkbenchHost'.
    [03.20.13 23:32:39] INFO: Setting definition for host 'ITLHost'.
    [03.20.13 23:32:40] INFO: Setting definition for component 'AuthoringDgraph'.
    [03.20.13 23:32:40] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_dgidx-output'.
    [03.20.13 23:32:41] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_forge-output'.
    [03.20.13 23:32:42] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_cumulative-partials'.
    [03.20.13 23:32:44] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_dgraph-config'.
    [03.20.13 23:32:45] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-dgraph-input'.
    [03.20.13 23:32:46] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-cumulative-partials'.
    [03.20.13 23:32:48] INFO: [AuthoringMDEXHost] Starting shell utility 'mkpath_local-dgraph-config'.
    [03.20.13 23:32:49] INFO: Setting definition for component 'DgraphA1'.
    [03.20.13 23:32:50] INFO: Setting definition for script 'PromoteAuthoringToLive'.
    [03.20.13 23:32:50] INFO: Setting definition for custom component 'WorkbenchManager'.
    [03.20.13 23:32:51] INFO: Updating provisioning for host 'ITLHost'.
    [03.20.13 23:32:51] INFO: Updating definition for host 'ITLHost'.
    [03.20.13 23:32:51] INFO: [ITLHost] Starting shell utility 'mkpath_temp'.
    [03.20.13 23:32:53] INFO: Setting definition for custom component 'IFCR'.
    [03.20.13 23:32:53] INFO: Updating provisioning for host 'ITLHost'.
    [03.20.13 23:32:53] INFO: Updating definition for host 'ITLHost'.
    [03.20.13 23:32:54] INFO: Setting definition for component 'LogServer'.
    [03.20.13 23:32:54] INFO: [ReportGenerationHost] Starting shell utility 'mkpath_input'.
    [03.20.13 23:32:56] INFO: Setting definition for script 'DaySoFarReports'.
    [03.20.13 23:32:56] INFO: Setting definition for script 'DailyReports'.
    [03.20.13 23:32:56] INFO: Setting definition for script 'WeeklyReports'.
    [03.20.13 23:32:57] INFO: Setting definition for script 'DaySoFarHtmlReports'.
    [03.20.13 23:32:57] INFO: Setting definition for script 'DailyHtmlReports'.
    [03.20.13 23:32:57] INFO: Setting definition for script 'WeeklyHtmlReports'.
    [03.20.13 23:32:57] INFO: Setting definition for component 'WeeklyReportGenerator'.
    [03.20.13 23:32:58] INFO: Setting definition for component 'DailyReportGenerator'.
    [03.20.13 23:32:58] INFO: Setting definition for component 'DaySoFarReportGenerator'.
    [03.20.13 23:32:59] INFO: Setting definition for component 'WeeklyHtmlReportGenerator'.
    [03.20.13 23:32:59] INFO: Setting definition for component 'DailyHtmlReportGenerator'.
    [03.20.13 23:33:00] INFO: Setting definition for component 'DaySoFarHtmlReportGenerator'.
    [03.20.13 23:33:00] INFO: Setting definition for script 'BaselineUpdate'.
    [03.20.13 23:33:00] INFO: Setting definition for script 'PartialUpdate'.
    [03.20.13 23:33:01] INFO: Setting definition for component 'Forge'.
    [03.20.13 23:33:01] INFO: [ITLHost] Starting shell utility 'mkpath_incoming'.
    [03.20.13 23:33:03] INFO: Setting definition for component 'PartialForge'.
    [03.20.13 23:33:03] INFO: [ITLHost] Starting shell utility 'mkpath_incoming'.
    [03.20.13 23:33:05] INFO: Setting definition for component 'Dgidx'.
    [03.20.13 23:33:05] INFO: Definition updated.
    [03.20.13 23:33:05] INFO: Provisioning site from prototype...
    [03.20.13 23:33:06] SEVERE: null
    Occurred while executing line 3 of valid BeanShell script:
    1|
    2|
    3| IFCR.provisionSite();
    4| WorkbenchManager.updateWsConfig();
    5|
    6|
    [03.20.13 23:33:06] SEVERE: Caught an exception while invoking method 'run' on object 'InitialSetup'. Releasing locks.
    Caused by java.lang.reflect.InvocationTargetException
    sun.reflect.NativeMethodAccessorImpl invoke0 - null
    Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
    com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
    Caused by java.lang.NullPointerException
    com.endeca.soleng.eac.toolkit.utility.IFCRUtility extractIfcrErrorMessage - null
    regards,
    Rahul

    Hi Ritwik,
    I got this error while running the initialze service . I checked the Dgidx log but there was no log generated as I'm still running the initialize service.
    I even checked the workbench port and hostname.Every thing looks fine.
    but im not able to login or see the workbench login web page whn i try to access it with the hostname:portnumber .
    Regards,
    Rahul

Maybe you are looking for