Individual Orders for Customer requirement and Forecast

Hi Experts,
We have requirement to create separate planned orders for customer demand and separate planned orders for forecast.
I mean one planned order should not cover both the forecast and the Sales order quantity; there should be separate orders for the two.
We are using SNP heuristic for planning.
For Eg in a bucket :-
Forecast = 100
Sales Order = 40
Lot size = Lot for Lot
Planning Strategy = 20
We Need:
Planned order 1 = 40
Planned order 2 = 60
Regards
Manu

Hi Manu,
Unfortunately, SAP itself says that one should not use 30 with SNP. Quoting from SAP Help for  "Planned Independent Requirements (PIR) Segment":
http://help.sap.com/saphelp_scm50/helpdata/en/61/95613b3e24526fe10000000a11402f/content.htm
"In SAP APO, the quantities for make-to-order operations are, in general, planned separately to those for make-to-stock operations. These areas are known as PIR segments.
In general, you can only plan within a PIR segment. This means that you cannot consume planned independent requirements for a make-to-stock scenario with sales orders in a make-to-order scenario.
However, SAP does offer a special segment to cover exactly this situation u2013 PIR segment Planning without final assembly, without individual requirements. For more information, see the input help for the PIR Segment field in the requirements strategy.
Supply Network Planning (SNP) cannot work with the individual customer segment. For example, demand in this segment is not shown in SNP. Consequently, you should not use requirements strategies that use this segment. In the standard system, these are the strategies 30 and 40."
I have not worked with 30 myself.
As I mentioned earlier, it won't be easy to differentiate between the planned orders, so I am still not clear how creating separate planned orders would be beneficial for you. But best of luck anyway.
Thanks - Pawan

Similar Messages

  • Planned Order for stock and planned order for customer requirement

    Hello everybody
    I want to make a different, in MD04,   between the planned order for stock and the planned order created for a customer requirement
    Thank for your help

    Hi,
    True planned order are generated for both the cases but the planned order generated for sales order will have sales order number in the below column and for stock will show independent requirement. Mainly no sales order reference will be there for make to stock scenario.
    Hope it will help.
    Regards,
    Alok Tiwari

  • Individual customer requirements and sales order requirements

    Hello Gurus,
    Can anybody please explain me the difference between individual customer requirements and sales order requirements.
    Please clarify
    Thanks,
    Nilesh

    Hi,
    *Individual Customer Requirement *
    Generally this is the material is produced against a Sales order,
    They will have the Stock Categroy as E as special Stock.
    They can be consumed only by the Relevant Sales order.
    Mostly in Case of the MTO this is applicable.
    Sales order Requirement.
    This is again Sales requirements.
    But it can consume any stock,
    the material is not produced against any specific sales order ,
    This is mostly in the MTS Scenario.
    Kindly let me know your feedback.
    Reg
    dsk
    Edited by: DSk on Dec 7, 2010 3:30 PM

  • Different between Customer requirement and Sales Order.

    Hi, can any expert explain the Different between Customer requirement and Sales Order to me?
    Any help would be appreciated.
    Regards,
    Tiger

    Hi...
    The Customer sents the requirement ( Like specially manufactured products as per the customer specifications) which can be entered in the form an Inquiry. With ref. to this inquiry a quotation will be sent to the customer. The customer places an order thru document with reference to this quotation.
    Now the company processes the order and manufactures the Product and delivers the Product to the Customer and recieves the payment.
    Hope this clears the query
    Reward points if found usefull
    regards
    Sajeev

  • What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

    What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

    What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

  • UWL config file for Customer, Vendors and Materials

    Hello All,
    We are trying to integrated uwl to connect to a MDM system for objects Vendors, Customer and Materials. I have looked at the MDM UWL config file, it is configured only for Business partners and products.. does anybody have the config file for Customer, Vendor and Material using business content..
    Thanks in advance
    Som

    Hey Som,
    If you are talking about Portal UWL, then you have to go for System Admin, there you should see UWL related iviews. There you have the ability to download the uwl xml. in that you have to do some modifications.
    All that matters for your problem is the MDM System you have created. when you chanage the respository informatin at this system. then your problem should be solved.
    Thanks,
    Raghavendra

  • I purchased the One to One when I bought my MacBook Pro, and I sent it in to Apple in order for the pictures and iTunes to be transfered. When I got it home no pictures or iTunes files were on it. What do I do?

    I purchased the One to One when I bought my MacBook Pro, and I sent it in to Apple in order for the pictures and iTunes to be transfered. When I got it home no pictures or iTunes files were on it. What do I do?

    Welcome to Apple Support Communities
    If you already set up your Mac when you sent it, you should know that Migration Assistant creates a new user with the migrated data. Go to  > Log Out, and log in the new user

  • Planning for Sales orders for quantities greater than forecast in APO SNP

    Hi All,
    We have a requirement in which planning in SNP is done based on the forecast  quantity transferred from DP . Demand from Sales orders is not taken into consideration for planning . The PO's are created based on the forecast quantity only SO's consume forecast  . Now a situation arises where we have the sales orders quantity  ( say 400) is more than that of the forecast( say 300 ) , this means  for quantity of 100 no planning is being done by SNP. 
    We want to know are there any ways of getting the remaining quantity being planned by SNP
    The planning strategy used is 40 in ECC
    Thanks in advance
    Regards
    Surendra

    Hi Surendra,
    For better control, the forecast quantity should match the sales order quantity for plg strategy 40.  If there are cases when sales order quantity is greater than forecast, you can create a control check in ECC to inform the users who creates the sales orders to get a popup message to create a sales order with rush order type or any other type to track the excess sales orders received against forecast.
    In SNP, once this rush order is entered, upon subsequent net change heuristic plan which runs day night, it considers those excess quantities and puts up purchase requisitions and procurement & production can be planned based using those PRs in SNP.
    Please confirm
    Regards
    R. Senthil Mareeswaran.

  • Multiple planed order for depedent requirement

    Hi gurus,
    I have created multiple sales order for a MTO material. But after MRP run multiple planed order is generated for the same depedent requirement(which is a raw material). I have maintained MRP type-PD and Ind/collective req=2 (in MRP4). Actually i want all the depedent requirement should clubbed( for the same material) and one planned ord/Purch. req should be generated.Please tell me what to do.
    Regards
    Rajib Pathak

    You will not get that since each Raw Material is dependent on a Planned Order, that's why it's "DEPENDENT". It has to be assigned to 1 requirement.
    If they were INdependent they could have been grouped since there are no assignment generator for them except 1 source.
    They are also generated as dependent because they're listed in the BOM, once it explodes all the materials in it are generated as individual dependent requirement.
    However, you shouldn't worry about various planned/purchase requisitions for the raw materials, because the purchasing department could group all these requisitions into 1 Purchase Order.
    Points is appreciated if useful
    Thank you

  • Authorization for Basic dates and Forecast dates

    Hello colleagues,
    My customer requires is to have separate authorizations for using Basic dates and Forecast dates within WBS Element, Network and Milestone.
    Iv'e noticed that the rellevant autorization object to have this separation is C_PROJ_TCD ; field: PSARG ; activity: 111 & 112. However I wonder if this is relevant to all related objects  in the project or only to the Project definition object.
    If the answer is only to PD I will be glad to have an idea how to controll it within the other objects .
    Thanks in advance
    Best Regards,
    Nir
    Edited by: Nir Horvitz on Nov 23, 2010 10:32 AM
    Edited by: Nir Horvitz on Nov 23, 2010 10:41 AM

    It is for all the objects... but you can not control it on basis of only that auth object.
    For network,
    use object :
    C_AFKO_ACT
    and activity 22 Display dates
    for Project def and WBS, use
    C_PROJ_KOK, C_PROJ_PRC, C_PROJ_VNR
    C_PRPS_KOK, C_PRPR_PRC, C_PRPS_VNR
    Regards,
    Amol Sarode

  • BAPI Object Reference for Customer Accounts and Open Items

    I am building an application for a client for Purchase Card Processing using Visual Studio 2005.   I am able to use VS 2003 to create the necessary object to get the Customer List, Customer Details,  and the list of Customer Open Items.
    I am totally new to SAP,  and need some help to figure out my next steps.
    1.  What call(s) will return an Open Item (Document) given the Document Number, along with the individual line items.  With that info I can post a Level 3 transaction and get an authorization code.
    2.  What is the process to post the purchase card authorization,  essentially a payment,  back to SAP for the open item.
    3.  What is the best source for reference details on BAPI?
    Thanks in advance for any assistance.

    Hi Scott,
    the questions are quite context specific to your application, the answers for which i am not aware at this point
    to pick up the 3rd one :
    >>3. What is the best source for reference details on BAPI?
    transaction 'bapi' in a SAP system, or se37 and a search with keywords like 'docnum' or 'openitem' or similar variations might yield some results
    also when you connect to a SAP system using vs2003, you will get a hierarchial view in the server explorer, that is also a simple way of finding bapi's that could be useful to your cause
    with respect,
    amit

  • Setting nedded for creation of Planned Order for Dependent Requirement.

    Hi PP Gurus,
    I have a one material for which I m running MRP which have three Components.
    I m using strategy 10 for FG and SFG also.
    When I m running MRP for FG the system is creation planned order for FG, but not for SFG even though no stock available for them.
    I m using lot size EX for all SFG.
    Please Help.
    Thanks in Advance.

    Dear ,
    You should maintain proper MRP related parameters for both FG and SFG.Check all the MMR parameters :
    1.MRP Type -PD for FG/SFG
    2.Procurement Type -E  for FG/SFG
    3.Planning Startegy -10  in FG
    4.BOM/Routing Explosion -Keep it Blank
    5.Indiviaul/Collective Indicator -not applicable as it is MTS  so keep it blank
    6.Validity of BOM /Routing should be corrcet before MRP run in MD02-NETCH , 2,1,3,3,2
    7.What is the Lot Sizing Set up-EX in OMI4-Scheduling Tab -Requirement date =Delievery Date and BOM Validity Date  .
    Ref .Re: MRP not plalned for dependent components
    8.Check in MRP4 -MRP Dept Requirement Parametre should be balnk for plalling the SFG  in MMR of FG -MM02
    I hope this issue may be with BOM explosion as per the validity and lot size -schedueling set up .
    Hope this will be useful
    Regards
    JH

  • Sort order for customer hierarchy dimensions

    I am using custom hierarchies in a universe and have created several calendar hierarchies as follows:
    Year
    Quarter
    Month Name
    When drilling in WEBI the Month Name is sorted alphabetically. Is there a way to display month name, but sort by month number (as there is for LoVs)?
    I would prefer to use month name in the hierarchy rather than month number as this is more informative to the user.

    Hi,
    WebIntelligence only provides alphabetical order (ascending or descending) and custom sort.
    So for dates it is recommended to concatenate the month number and the month name to have an sort working.
    Otherwise I recommend to do a custom sort in the document.
    Didier

  • Regading deletion of existing order for customer

    hi friends
    i nedd to delete existing order for particular customer when creating new order for that customer by useing API. how to delete order by useing API and one more thing how to do i mean which parameter or procedure useing for that
    thanks
    cahndra sekhart

    Please be more clear about what you're trying: tools used, statements, examples, ...
    I suspect this is no issue with the SQL Developer tool. If it's pure SQL, please post these questions under the dedicated SQL And PL/SQL forum.
    Regards,
    K.

  • Multiple planned orders for a requirement

    Hi,
           We have PPDS MRP with NEW shelflife w/ lot size profle run for product and produces multiple planned orders for the the requirements.
    I have a requirement of 4,750 and 14,976 in the system and available stock 86,966.
    The system creates two planned orders with 34,632 and 26,771 PCs.
    Why is the system creating two order instead of one??
    The min. lot size is 1876 and rounding is 936.
    can somebody tell me what factors the system is considering??
    Thanks.

    Hi Visu,
    Which lot size procedure you are using , please check in lot size tab in Product master, it should be lot for lot.
    if it is lot for lot , please change it to by period and weekly , is it change the planned order quantity ?
    Manish

Maybe you are looking for