Info NIDAQmx_Ne​wPhysChanA​OCtrl() not found
I use F1 to find info on the NIDAQmx_NewPhysChanAOCtrl() function. Nothing is found. Can anybody help?
Hi hn_sofec,
The reason you can’t find the help for that function by pressing <F1> is that a specific help file doesn’t exist for that function.
When you press <F1>, it uses the index in the help to search for that function name. It finds the same page you would find if you opened the help, went to the Contents tab, browsed to Library Reference>>NI DAQmx Library>>NI DAQmx C Functions, and picked out the particular function you were looking for. When you install DAQmx, it installs the DAQmx Library Help into CVI so that the function help is searchable this way just like it is for most of the built-in CVI functions.
The DAQmx I/O Control functions are not actually part of the main DAQmx library, even though they are only available if you install DAQmx. Instead, they’re included under the Tools library in CVI as custom controls.
If you open the help and navigate to Tools Library>>NI DAQmx IO Controls, you will see that there is a single help topic.
It says, among other things: “Refer to the function panels for function and parameter help for these controls.”
So, instead of hitting <F1>, you’ll need to hit <Ctrl+P> to recall the function panel first and then hit <F1> to get to the help. It’s an extra step, but if you compare this to other DAQmx functions, you’ll find that the information in the function panel help is identical to the information in the help files. You just don’t have the benefit of seeing it all in one place for the DAQmx I/O controls.
The other post Wolfgang pointed to also shows you how to use and get to the functions, and how to access the function help from the Library tree instead of going through the function panel. Most of the built-in DAQmx examples use the I/O controls, so there are also a lot of places you can look to see how to use the functions.
Is there something specific with that function you have a question about?
Similar Messages
-
SCCM 2012 Setup error when setting SQL connection info "Network Path Was Not Found"
Hello.
I'm facing an issue during CCM 2012 SP1 Beta Setup on step "DB INFORMATION"
My lab is set like that:
1x Front-end WS 2012 rtm "CCM Install on it" (Fresh install = no features installed)
1x Back-end WS 2012 rtm SQL Server 2012 SP1 (I don't know if this is supported).
On the sql Side there is already a first instance with SCVMM 2012 SP1(beta) environment that work well.
A second dedicated instance is ready for CCM install.
Named Pipes enabled , TCP/IP Enabled
Firewall rules for 1433 and 4022 are enabled on the Domain profile ,other profiles are disabled.
Instance Service is running with a domain account
Everything is published in AD (delegations for computer account), Schema Prep already done manually.
I'm Able to resolve dns name of the SQL server on the CCM VM and telnet 4022 + 1433 ports.
For the finish here is the end of Setup Wizard logs:
Exception rethrown at [0]:
à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.Controls.Button.OnClick()
à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
à System.Windows.Input.InputManager.ProcessStagingArea()
à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
14/12/2012 08:21:06: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database SCCM\master on server SQL001.IT-DEPLOYMENT.LAB.
14/12/2012 08:21:53: ConfigMgrSetupWizard Error: 1 : Exception message: [Le chemin réseau n’a pas été trouvé.
], Exception details: [System.IO.IOException: Le chemin réseau n’a pas été trouvé.
Server stack trace:
à Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
à Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
à System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
à System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.Controls.Button.OnClick()
à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
à System.Windows.Input.InputManager.ProcessStagingArea()
à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
Please help me; I'm driving crazy.
Kévin KISOKA - MCTS Exchange Configuring, MCTS Hyper-V Server Virtualization3 Steps are neccessary:
1. Make sure the Windows Firewall Service on the SQL Server is running and set to automatic
2. Add the SQL EXE as a Program Exception to the Firewall on the SQL Server:
To add a program exception to the firewall using the Windows Firewall item in Control Panel.
- On the Exceptions tab of the Windows Firewall item in Control Panel, click
Add a program.
- Browse to the location of the instance of SQL Server that you want to allow through the firewall, for example
C:\Program Files\Microsoft SQL Server\MSSQL11.<instance_name>\MSSQL\Binn, select
sqlservr.exe, and then click Open
- Click OK.
From http://technet.microsoft.com/en-us/library/cc646023.aspx
3. The last step neccessary, on the SQL Server, is to set File and Printer Sharing "on". When this is off, the following error occurs: "Network Path was not found" -
Agreement not found for trading partners:FromTP HostParty, ToTP RemoteParty
Hi,
I have setup host partner and trading partner by importing CPA. I am trying to generate outbound message on Listening Channel(JMS_OUT_Queue). I am using custom Java Implementation relying on weblogic client jar to produce messages on this JMS_OUT_Queue.
My Messages are properly produced by java application and consumed by Oracle B2B. but they all fail as agreement could not be found.
Agreement not found for trading partners: FromTP HostParty, ToTP RemoteParty with document type ACTION:action1 Service:service1 ServiceTypestring-OUTBOUND.
I am setting below JMS Header properties.
1.FromRole
2.ToRole
3.FROM_PARTY_ID_TYPE
4.TO_PARTY_ID_TYPE
5.SERVICE
6.ACTION
7.FROM_PARTY
8.TO_PARTY
9.SERVICETYPE
I have tried lot of permutations and combinations with JMS Header properties, no matter what I do, Agreement is not picked up and message fails.Thanks Anuj. I made it work by passing document version and id as JMS headers.
Earlier I was setting action header as "ACTION=action1", I will try by modifying it as "ACTION_NAME=ACTION:action1".
*<UPDATE>: I tried it, still not working.*
Error: Machine Info: (apl08316uaapp01) Description: Agreement not found for trading partners: FromTP HostParty, ToTP RemoteParty with document type ACTION:rsProcessLineAvailabilityRequest Service:bcRequestLineAvailabilityv14 ServiceTypestring-OUTBOUND.
JMS Header:
JMSXDeliveryCount=1, MSG_ID=ID:<457648.1369731952449.0>, FROM_PARTY_ID_TYPE=urn:oasis:names:tc:ebXML-cppa:partyid-type:duns, Sequencing=false, ACTION_NAME=ACTION:rsProcessLineAvailabilityRequest;SERVICE:bcRequestLineAvailabilityv14;SERVICETYPE:string, FROM_PARTY=DUNS_ID_OF_HP, TO_PARTY_ID_TYPE=urn:oasis:names:tc:ebXML-cppa:partyid-type:duns, TO_PARTY=DUNS_ID_OF_TP
regards,
Ashay T.
Edited to Remove Organization Specific Info -
TP Agreement Not Found -- OAGIS XML document over AS2
Hi,
I am getting TP Agreement not found error while receiving OAGIS XML document over AS2. Below is error message.
Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND
I am not sure why it says null-INBOUND. It appears like it is not able to identify Document Version. DOCTYPE_REVISION=7.2.1 is being passed in the AS2 transport headers but still it does not recognize the version.
I am not sure what is missing. Please give some ideas hints.
Below is the Business Message:----
Id AC12149513F1F78141400000E7DEDE00
Message Id AC12149513F1F78136200000E7DED800
Refer To Message Refer To Message
Sender Type AS2 Identifier
Sender Value SOALocal
Receiver Type AS2 Identifier
Receiver Value PowellIndustries
Sender SOALocal
Receiver Powell
Agreement Id
Agreement
Document Type PROCESS_INVOICE_002
Document Protocol OAG
Document Version 7.2.1
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 06/07/2013 11:28:49 AM
Receive Time Stamp 06/07/2013 11:28:50 AM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)
Document Remaining Retry(Agreement)
Native Message Size 10788
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label
Collaboration Id AC12149513F1F7813BF00000E7DEDB00
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name AS2
Exchange Protocol Version 1.1
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code B2B-50547
Error Description Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Below is the Wire Message:----
Id AC12149513F1F78115400000E7DED600
Message Id AC12149513F1F78115400000E7DED600
Business Message AC12149513F1F78141400000E7DEDE00
Packed Message Packed Message
Payload Payload
Protocol Message Id <38383939373331343630313931303737@SOALocal>
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
Message Digest Message Digest
Digest Algorithm md5
Transport Protocol HTTP
Transport Protocol Version 1.1
Url http://pwl.pri:8001/b2b/transportServlet
security
Transport Headers ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri:8001/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
certificates certificates
State ERROR
Reattempt Count
Error Code B2B-50547
Error Description Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Text Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
exchangeRetryInterval
exchangeRemainingRetry
Message Size 10788
Thanks
Ismail M.Hi Anuj,
Here is the payload from the wire message. We are using 11.1.1.6.0
<?xml version = '1.0' encoding = 'UTF-8'?>
<PROCESS_INVOICE_002 xmlns="http://www.openapplications.org/171_process_invoice_002">
<CNTROLAREA xmlns="">
<BSR>
<VERB value="PROCESS">PROCESS</VERB>
<NOUN value="INVOICE">INVOICE</NOUN>
<REVISION value="002">002</REVISION>
</BSR>
<SENDER>
<LOGICALID>POWELLIND</LOGICALID>
<COMPONENT>B2B</COMPONENT>
<TASK/>
<REFERENCEID/>
<CONFIRMATION>0</CONFIRMATION>
<LANGUAGE>ENG</LANGUAGE>
<CODEPAGE/>
<AUTHID>oracle B2B</AUTHID>
</SENDER>
<DATETIME qualifier="CREATION">
<YEAR/>
<MONTH/>
<DAY/>
<HOUR/>
<MINUTE/>
<SECOND/>
<SUBSECOND/>
<TIMEZONE/>
</DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
<PROCESS_INVOICE>
<INVHEADER>
<AMOUNT qualifier="DOCUMENT" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<DATETIME qualifier="DOCUMENT" index="1">
<YEAR>2013</YEAR>
<MONTH>03</MONTH>
<DAY>15</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0500</TIMEZONE>
</DATETIME>
<DOCUMENTID>1000182</DOCUMENTID>
<DESCRIPTN/>
<DOCTYPE/>
<PAYMETHOD/>
<REASONCODE/>
<USERAREA/>
<PARTNER>
<NAME index="1">Powell US Operating Unit</NAME>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1">Powell US Operating Unit</NAME>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<CONTACT>
<NAME index="1">No Sales Credit</NAME>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>RemitTo</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<ADDRESS>
<ADDRLINE index="1">PO Box 843823</ADDRLINE>
<ADDRTYPE/>
<CITY>Dallas</CITY>
<COUNTRY>United States</COUNTRY>
<COUNTY>Dallas</COUNTY>
<DESCRIPTN/>
<FAX index="1"/>
<POSTALCODE/>
<REGION/>
<STATEPROVN>TX</STATEPROVN>
<TAXJRSDCTN/>
<TELEPHONE index="1"/>
<URL/>
<USERAREA/>
</ADDRESS>
<CONTACT>
<NAME index="1"/>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<PARTNER>
<NAME index="1"/>
<ONETIME/>
<PARTNRID/>
<PARTNRTYPE>Carrier</PARTNRTYPE>
<SYNCIND/>
<ACTIVE/>
<CURRENCY/>
<DESCRIPTN/>
<DUNSNUMBER/>
<GLENTITYS/>
<NAME index="1"/>
<PARENTID/>
<PARTNRIDX/>
<PARTNRRATG/>
<PARTNRROLE/>
<PAYMETHOD/>
<TAXEXEMPT/>
<TAXID/>
<TERMID/>
<USERAREA/>
<ADDRESS>
<ADDRLINE index="1"/>
<ADDRTYPE/>
<CITY/>
<COUNTRY/>
<COUNTY/>
<DESCRIPTN/>
<FAX index="1"/>
<POSTALCODE/>
<REGION/>
<STATEPROVN/>
<TAXJRSDCTN/>
<TELEPHONE index="1"/>
<URL/>
<USERAREA/>
</ADDRESS>
<CONTACT>
<NAME index="1"/>
<CONTCTTYPE/>
<DESCRIPTN/>
<EMAIL/>
<FAX index="1"/>
<TELEPHONE index="1"/>
<USERAREA/>
</CONTACT>
</PARTNER>
<DOCUMNTREF>
<DOCTYPE>INV</DOCTYPE>
<DOCUMENTID>10005:21009</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<DESCRIPTN/>
<DOCUMENTRV/>
<LINENUM/>
<NOTES index="1"/>
<SCHLINENUM/>
<SUBLINENUM/>
<USERAREA/>
</DOCUMNTREF>
<INVTAX>
<AMOUNT qualifier="TAX" type="T" index="1">
<VALUE>413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<AMOUNT qualifier="TAXBASE" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY>USD</CURRENCY>
<DRCR>D</DRCR>
</AMOUNT>
<QUANTITY qualifier="PERCENT">
<VALUE/>
<NUMOFDEC/>
<SIGN/>
<UOM/>
</QUANTITY>
<DESCRIPTN/>
<LINENUM/>
<TAXCODE/>
<TAXJRSDCTN/>
<USERAREA/>
</INVTAX>
<PYMTTERM>
<AMOUNT qualifier="DISCNT" type="T" index="1">
<VALUE/>
<NUMOFDEC/>
<SIGN/>
<CURRENCY/>
<DRCR/>
</AMOUNT>
<DATETIME qualifier="DISCNT" index="1">
<YEAR/>
<MONTH/>
<DAY/>
<HOUR/>
<MINUTE/>
<SECOND/>
<SUBSECOND/>
<TIMEZONE/>
</DATETIME>
<DATETIME qualifier="DUE" index="1">
<YEAR>2013</YEAR>
<MONTH>04</MONTH>
<DAY>14</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0500</TIMEZONE>
</DATETIME>
<DATETIME qualifier="PYMTTERM" index="1">
<YEAR>1952</YEAR>
<MONTH>01</MONTH>
<DAY>01</DAY>
<HOUR>00</HOUR>
<MINUTE>00</MINUTE>
<SECOND>00</SECOND>
<SUBSECOND>0000</SUBSECOND>
<TIMEZONE>-0600</TIMEZONE>
</DATETIME>
<DESCRIPTN>Net Due in 30 Days</DESCRIPTN>
<TERMID>30 NET</TERMID>
<USERAREA>
<AMOUNT qualifier="TOTAL" type="T" index="1">
<VALUE>5413</VALUE>
<NUMOFDEC>2</NUMOFDEC>
<SIGN>+</SIGN>
<CURRENCY/>
<DRCR>D</DRCR>
</AMOUNT>
</USERAREA>
</PYMTTERM>
</INVHEADER>
<INVLINE>
<AMOUNT qualifier="EXTENDED" type="T" index="1">
<VALUE>50</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<CURRENCY/>
<DRCR>D</DRCR>
</AMOUNT>
<OPERAMT qualifier="UNIT" type="T">
<VALUE>5</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<CURRENCY/>
<UOMVALUE>1</UOMVALUE>
<UOMNUMDEC>0</UOMNUMDEC>
<UOM/>
</OPERAMT>
<QUANTITY qualifier="ITEM">
<VALUE>10</VALUE>
<NUMOFDEC/>
<SIGN>+</SIGN>
<UOM/>
</QUANTITY>
<LINENUM>1</LINENUM>
<DESCRIPTN>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</DESCRIPTN>
<ITEM>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</ITEM>
<ITEMTYPE/>
<ITEMX>11HRPO</ITEMX>
<OPENITEM/>
<PROJACTVTY/>
<UNIT>LB</UNIT>
<UPC/>
<USERAREA/>
<DOCUMNTREF>
<DOCTYPE>LINE</DOCTYPE>
<DOCUMENTID>10005:21009:19019</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE>Supplier</PARTNRTYPE>
<DESCRIPTN/>
<USERAREA/>
</DOCUMNTREF>
<DOCUMNTREF>
<DOCTYPE>SalesOrder</DOCTYPE>
<DOCUMENTID>600813</DOCUMENTID>
<PARTNRID/>
<PARTNRTYPE/>
<DESCRIPTN/>
<USERAREA/>
</DOCUMNTREF>
<DOCUMNTREF>
<DOCTYPE>PurchaseOrder</DOCTYPE>
<DOCUMENTID>TEST123</DOCUMENTID>
<PARTNRID>N/A</PARTNRID>
<PARTNRTYPE>Customer</PARTNRTYPE>
<DESCRIPTN/>
<DOCUMENTRV/>
<LINENUM/>
<SCHLINENUM/>
</DOCUMNTREF>
</INVLINE>
</PROCESS_INVOICE>
</DATAAREA>
</PROCESS_INVOICE_002> -
I'm getting this info message in console logs.
"org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Resource /comp-info/cs/favicon.ico not found"
In code having the link as <link rel="icon" href="../../../favicon.ico" type="image/x-icon"/>. The favicon.ico image is present in the designs folder that is referred in href. Any help??
Regards,
JoshuaCan you try accessing the favicon.ico by typing the URL in the address bar of the browser, the reason I am asking you to do this is to isolate the issue. Few things to observe for:
- when you access favicon.ico by typing the URL in browser, check are you getting the INFO message
- if you are not getting the INFO message while you do above, it means it is from some other location URL is causing this INFO message?
- check the access.log, check the URLs -
I have an ipod touch 64gb. Lately, I discovered an error message on the lockscreen that says "Runtime Error Info.plist not found". What is this, will it effect my ipod, how does it effect my ipod and how do I correct the error? (I see the error message when I power up my ipod and when I reboot).
Follow this article:
How to restart the Apple Mobile Device Service (AMDS) on Windows -
Purchase Info Record not found in Purchasing Organization 1000
Hi all,
While doing MIGO, Goods issue to cost center from consignment stock (201 k )
i'm getting this error.
"Purchase Info Record not found in Purchasing Organization 1000"
i'm practising with standard company 1000.
i have checked the all assignments.
i.e., purch. org ->company code and
purch. org-> plant.
company code -> plant.
Please guide me.
regards,
anand.Hi,
Go and maintain Pur. Org 1000 against ur plant in :
SPRO-Enterprise Structure-Assignments--MM-Assign Std Pur. Org for plant
and please confirm that you have maintained the inforecord in Pur Org 1000 only and that too of Consignment type.
Hope this helps
Regards
Dheeraj -
Disp+work,queue info not found
i'm working on erp 2004,64 bit MSSQL,after kernel update.............disp+work connetced,queue info not found.....
can any help in this
thanki n advance
krisHello krishna,
Have you investigated the developer trace files. Please post the contents
dev_w0,dev_disp for further investigation.
You can also try out by restarting all the services and sap systems once again.
Regards,
Jafer -
Page not found error while providing extra path info
I am porting an application from JRun to weblogic 7.0. I am getting page not found
when I provide extra path info. I want to getPathInfo from the request. This
works on JRun. The servlet mapping is the same. Can someone help me with this?
An example of the servlet mapping is given below.
When I post from the browser, I do http://localhost:7001/<webapp>/test/Name/Description
<servlet-name>TestServlet</servlet-name>
<display-name>TestServlet</display-name>
<description>test</description>
<servlet-class>com.web.servlet.TestServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>TestServlet</servlet-name>
<url-pattern>/test</url-pattern>
</servlet-mapping>
Modify the url-pattern
<url-pattern>/test/*</url-pattern>
thanks,
Deepak
"Badri" <[email protected]> wrote:
>
>I am porting an application from JRun to weblogic 7.0. I am getting page
>not found
>when I provide extra path info. I want to getPathInfo from the request.
>This
>works on JRun. The servlet mapping is the same. Can someone help me with
>this?
>An example of the servlet mapping is given below.
>
>When I post from the browser, I do http://localhost:7001/<webapp>/test/Name/Description
>
>
> <servlet-name>TestServlet</servlet-name>
> <display-name>TestServlet</display-name>
> <description>test</description>
> <servlet-class>com.web.servlet.TestServlet</servlet-class>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>TestServlet</servlet-name>
> <url-pattern>/test</url-pattern>
> </servlet-mapping>
>
-
ApplicationLoader - Icon specified in the Info.plist not found
Fellow developers,
Have any of you seen this error when trying to upload the app using the ApplicationLoader:
Icon specified in the Info.plist not found: iconplus
The icon file is there and has always loaded just fine on the emulator. I entered the filename in the app's Target, but without the .png extension. Is that correct?
Also, I mad sure the icon file name has no special characters or spaces.
Any other ideas? It's not fair not to be in the App Store because of an icon
EugeneTo answer my own question:
Yes, you really need to include the icon's extension when you enter the icon name in your project properties or Target. Also, avoid spaces and special characters in your icon's file name.
Ex: myicon.png
If you don't specify an extension, you will not be able to upload your app to iTunes Connect, but get an error message saying that your icon is not found. -
How to fix runtime error info.plist not found?
i have an ipod touch 5G on ios 7.0.6 and I decided to respring the springboard but when it came back on it displayed a box saying "runtime error: info.plist not found with options of continue or exit." I have tried both but none work. please help
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Error :Purchasing info record not found in purchasing organisation
Hi,
after invoice verification with T.Code MIRO,
Goods issue for consumption: with T.Code MB1A
it display error message: purchaseing info record not found in purchasing organisation, pls tell me steps to correct it.
thanks in advance
ramesh.Dear Azis,
Double Click on the serial no of the Component you will get the inforecord fieldin the Purchasing tab. But this is only for Stock Materials.
Please recheck again your components.
Regards,
Shareeq
Edited by: K M AHAMED SHAREEQ HUSSAIN on Oct 13, 2009 2:42 PM -
Info Not Found - Serial number not recognised after registering Applecare
Hi ya
I registered my Applecare yesterday, checked my warranty status and it still said I had until Feb 08. So i did a bit of snooping on the forums and read that Apple can take up to 4 days to update the info about my MB.
So... this morning I checked the warranty status again by inputting the serial number and
"Info Not Found"
What?
I am putting in the right serial number. I tried it on Safari and Firefox. About 8 attempts say 'Info Not Found"
So what's going on?
Has anyone had this happen or have any ideas?
Might Apple be updating this info now?
Am a a bit worriedHi Jack
I bought mine from eBay from a seller with 100% feedback. He sells only Apple products and all of his buyers say they have registered with no problem.
I bet i'm the unlucky sod to be the first to have any problems.
I saved 50% off the retail price and yesterday it said your Applecare was sucessfully registered. So all was looking well.
But now.... God knows what's happening?
I paid with Paypal so I am covered if anything happens. I have the guys home number and mobile number too so I can call him.
If you are looking to buy from eBay then two things.
A) check feedback
B) Use paypal.
and if you want to, I aways ask a question first and see how their communication is, just to make sure.
eBay is always a bit pot luck, but I got my brand new MB for £180 cheaper than Apple so I was more than happy with that.
I'm sure this applecare is fine but I just want to know what's going on with my serial number. WHERE AM I? -
HT5312 i did not found 'send reaet security info e-mail' i forget :(
i did not found 'send reaet security info e-mail' i forget
<Email Edited by Host>We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
The reset link will only show on your account if you have a rescue email address (which is not the same thing as an alternate email address) on it.
If you aren't getting the reset link then you don't have a rescue email address, and you won't be able to add one until you can answer your questions - you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
Info object not found at query level
Dear Experts,
I have a issue in concern of Query dsigner. I have designed a query on the basis of ODS & i is working fine on dev system. Then i transport the same query on the QAS system, when i executed the same on QAS syste, it gives an error Characteristic BAS: Place Name was not found in InfoProvider when I analyse the same i found that the query is not able to find one field. then I check the same field in ODS, but the field is available in ODS. I am not able to find out the solution or other way that why this type of error is coming.
I also re transport all the things but still getting the same error.
thanks in advance
NehaHi Neha,
Try re-importing(with overwrite mode) the query once in QA and if the error still persists, collect the query once again and transport it to QA.
I'm saying this because you have made enough checks at all levels, hence try this option.
if structure of the DSO's in both the systems are identical and if you transport the query once again...the error should be fixed.
if the structures are not indentical or any of the objects are inactive then you may face the problem. consider all these things before collecting the query.
Regards,
Sudheer.
Maybe you are looking for
-
Reporting Customer Consignment values
Hello Gurus, How can we achieve this Need the capability to report on historical customer consignment values. MB58 only shows quantity, and MB52 shows valuation but is just a current snapshot. Need reporting capability similiar to MC.9/MC.L. Can any
-
IPhoto cant find a device to burn message
I am getting an error message saying saying that iPhoto can not find a device to burn, when I try select share and then burn from the menu. How can I get iPhoto to "see" a device so I can burn pictures again? Thanks, Robin
-
Hello all- - I simply prefer the audio quality of WAV files to MP3 and would be happyto have 30-50? WAVS on my Zen V Plus 4 Gb rather than 5000 or so MP3s.Even though the Zen V is listed as handling WAV files everywhere I look,I cannot get mine to pl
-
CLI147 Invalid command Errors in asadmin
Installed Sun Java� System Application Server Platform Edition 8.1 2005Q1 on fresh installation of Solaris 10 Sparc. When trying to run certain commands in asadmin I get the following error: CLI147 Invalid command, create-instance I get the same erro
-
Hi, I have a couple of textviews and checkbox buttons in my interface and I would like to save their states in the user's preferences. I'm trying to do it for the first text view but it doesn't work. Here is what I do in Interface Builder: -Added a "