Info on debuggung the pluggin on 6.1SP2

Hi All,
I want information on how to use gdb debugguer for a plugin test.so which is attached to the main SP2 binary?
I see there are two binaries ns-httpd and the uxwdog.So which one to start with?
Thanks in advance
-A

Is the crash happening when your plugin is disabled?
No the crash never happens when we disable the plugin.
Is the crash happening when Web Server loads your plugin?
Yes .
I get the following errors
[16/Aug/2007:03:25:27] info (12876): Netscape-Enterprise/6.1SP4 B07/07/2003 03:00
[16/Aug/2007:03:25:58] catastrophe (12889): Server crash detected (signal SIGSEGV)
[16/Aug/2007:03:25:58] info (12889): Crash occurred in function strstr from module /usr/lib/libc.so.1
and once in
13883): Server crash detected (signal SIGSEGV)
[16/Aug/2007:05:36:25] info (13883): Crash occurred in function strcmp from module /usr/lib/libc.so.1
[16/Aug/2007:05:41:02] info (13916): successful server startup
Is your plugin having an init directives, can you debug there?
No.
Can you share your plugin code?
It would be nice if we can do it without sharing.

Similar Messages

How do I keep my daughter and I's apps and contact info SEPERATE on the same itunes while sharing songs?

How do I keep my daughter and I's apps and contact info SEPERATE on the same itunes while sharing songs?
I need step by step directions on set up different profiles on itunes for 2 seperate iphones. I want to be able to share purchases if desired, but not have to have the same apps/songs on our phones. I could do with sharing songs.....apps not so much. Please Help!!
Thank You

This should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards.

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

My family put multiple devices on the icloud, and I need to know how to manage duplicate entries. Specifically contacts. If I fix the contact list on my pc will it push the info out to the other devices and maintain it correctly?

All devices signed into the same iCloud account will finish up with the same contacts. Of course if prior to joining iCloud two family members each had an entry for Uncle Fred, then you will finish up with two contact cards for Uncle Fred, and so on. If you tidy this up on your computer then the changes will propagate to everyone else.

I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

Hi
I have about 1000 contacts on my iPhone 4 after syncing with iCloud there are only about 120 contacts on iCloud How can I have the same info on both the iCloud and my iPhone

On the iPhone tap Settings > iCloud
Switch Contacts off then back on then reset the device.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

When I download a movie from iTunes the cover art disappears. I try get info and add the art, it doesn't show up. So it's just gray. It opens and plays fine. Apple can't figure it out. It's an nas drive. When I use a firewire drive I get the art

When I download movies from iTunes to my NAS drive, I don't get the cover art. It shows up while its downloading, but when it's finish it disappears. If it has an iTunes extra the cover art is there. I tried get info and add the cover art, it never shows. Regardless of how I add it. Funny thing is, if I download the same movie to my external firewire drive, no problem its there. I've called Apple with no success. I've even tried copying the movie with the art from the firewire drive to replace the file on then NAS drive I still loose the movie cover art. I also tried several times to re download it, no luck. Any ideas? I'm out of ideas.

Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?

I just purchased a few songs from Itunes and could not edit the information in the Get Info section of the file. It's greyed out. Any ideas? Has ITunes changed and no longer allows editing.

Has ITunes changed its editing feature for songs, etc.? I just purchased a few songs and found that I could not edit them using the "Get Info" feature. The information is greyed out and does not allow editing. Among other things, I usually like to eliminate the word "THE" from group names for easier alphabetizing in my library. Thanks for any help.

Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista

Multiple info records for the same material record in the catalog

Hi Guys,
I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
Systems:
SRM 5.0 (Classic implementation scenario)
ECC 6.0
SRM-MDM 2.0
PI 2005
Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
Your help would be appreciated!
Regards,
Skander

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

When you boot the new machine for the first time, you'll be prompted to import your data from a Time Machine backup.

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

Restore it using the computer you normally sync with.

I can't get my saved info off of the dvd's. help me please

hi i had to have my HP G56 notebook pc restored 2 days ago. i saved all my pictures & documents to DVD'S, like cyberlink said to do. how do i
get my pictures & info back from the DVD'S ?? i tried the restore my
files, & it put a second one on the desktop. i am so lost & need help.
three weeks ago i was hacked in my email, then hit hard in my microsoft
security essentials; whatever it was damaged my drivers. they have all
been fixed thru HP. microsoft did their part. so far, so good as i'm
double protected, i think. operating system: windows 7 home premium.
can anyone there help me to restore my pictures & info on the DVD'S ??
thank you, bambeyette

Thank you, Allen. My iMac is a 2009. I can't shine a light into the disc drive slot as it has a built in whisker cover that prevents anything from getting in. It will accept a disc half way in before the disc reaches a springy obstruction.
About 3 weeks ago, the computer locked up so I inserted the OS disc and reinstalled it. In general, the computer works just like it used to but we've had a few quirks appear; for example, this is one of them. Also, we can't figure out how to keep from having to sign-in when we turn the computer on. Also, we can't access our one on-line account anymore. Very strange.
Dave
P.S.: Just realized I mis-spelled your name. Sorry Allan.
Message was edited by: DTabbert

How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

You must put each device on the Verizon cloud.
Not both lines on one.
Go and set up a my Verizon account for the second line and you will have Verizon cloud service on that line.
Oh the term "icloud" is a trademark of Apple Inc. Verizon is not Apple.
Good Luck

I need to change the input level and I can not open the track info pane in the new garageband. Can you help me?

I have tried the help menu. It only shows how to open the track info pane in the old garageband. It shows the info button, which is not in garageband anymore. I need to open the track info pane to change the input level. If there is another way to do this please tell me.

Open the "Smart Controls" for your track, and then press the Info button .
The "record level" slider is at the top of the Info panel below the track heads.

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Get Info' command in the Finder to ensure the file is unlocked and you have permission to access the file.

I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

To run iTunes in 64-bit mooose the "Get Info" command in the File menu, and uncheck the "Open in 32-bit mode" checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it a

To run iTunes in 64-bit mode, select the iTunes application in the Finder, choose the “Get Info” command in the File menu, and uncheck the “Open in 32-bit mode” checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it again and same message comes up

Have you disclosed the "General" brick in the "Info" panel? Click the disclosure triangle to the left of "General":
What is your iTunes version and MacOS X version?
-- Léónie

Info on debuggung the pluggin on 6.1SP2

Similar Messages

Maybe you are looking for