Info record no is not appearing in PR Source supply for MRP generated PR

Hi,
I have a material ,I have naintained inforecord & source list .when i am trying create PR with source determination tick ,system is adopting Inforecord no in PR source of supply tab.But if you create PR through MRP ,system is picking only fixed vendor
Info record filed is blank.
Please guide me how to get Inforecord no in MRP PR
Regards
VR

Hi ,
That is also fine.even if you tick the fixed indicator only vendor no is appearing
Regards
VR

Similar Messages

  • Shopping cart not appearing in users sourcing cockpit for completion

    Hi
    A user cannot see his shopping carts in his sourcing cockpit  in his worklist. He finds them with the find tab but he cannot mark them as complete. The completion check box column is not there. However another colleague can find these shooping carts and the completiong column is there. Why this occur?
    Does it have anything to do with where the user is placed in the org. struture? Please advise.
    Kind regards

    Hi,
    seems that the requirement is assigned to a different Pgroup. Therefore one user does see it, and the other one not. When you adjust the assignment in the Org Model, the user will see the requirement.
    Check the responsibility and assignment of your Pgroups.
    Cheers,
    Claudia

  • Excise Invoice Tab Page/ Document Info  Tab Page is not appearing in MIGO

    Dear Friend
    For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
    In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
    Thanks
    Chandra

    Hi
    I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
    Thanks
    Chandra

  • Info record Po text not printing in Po

    Hi all,
             Info record po text not printing in po print out. Info record po text showing in po at item level but it was not printing in po. In info record No matl text checked. In material master no text maintained. please help on this
             Thanks in advance for your help

    Hi Mahesh,
    Follow the path:
    SPRO--> MM --> Purchasing --> Messages --> Texts for Messages ---> Define texts for Purchase Order
    Double click on "Texts for Document Item" under Dialog Structure
    Click on new entries and then Fill the following fields:
    Pur. Doc. Category: Purchase Order
    Print Operation: New
    Doc. Type: NB
    Item Category: Standard
    Text Object: Purchasing Doc. Item texts (EKPO)
    Text Id: Info Record PO Text (F02)
    Print Sequence: 2
    Print Priority: 1
    and then Save
    Hope this helps
    Thanks,
    Ankur

  • MiniTOC does not appear in translated source file

    RoboHelp 8.0.2
    WebHelp Output
    I added a miniTOC placeholder to three of my topics. This is the first time I am using the placeholder.
    The English WebHelp project was sent for translation to French Canadian. I received the source project and noticed that the placeholder does not appear in the source file. Therefore, when I compile the output the miniTOC does not appear.
    The translation company is using the latest version of RoboHelp, but I am not sure what tool they use to translate.
    I have no clue how to resolve this issue. Sample code and screens are listed below.
    Donna
    English Source
    <h1><a name="Top"></a>Working with Web Ordering</h1>
    <p&gt;This topic explains how to generate and maintain NAPA and Factory orders.
    (Special orders and Non NAPA orders will be available in a future release).
    You perform these tasks on the <span style="font-weight: bold;">Order
    Maintenance</span> page. This topic assumes you have launched <span style="font-weight: bold;">Order
    Maintenance</span> from the TAMS II Landing Page or selected <span style="font-weight: bold;">Inventory
    &gt; Web Ordering</span&gt; from TAMS II BackOffice.</p&gt;
    <p>See: <span style="font-weight: bold;">TAMS II Web Interface Overview
    </span&gt;<span&gt;topic</span&gt; for instructions on common functionality such
    as sorting data.</p&gt;
    <?rh-placeholder type="minitoc" ph-style="font-family:Arial;font-size:10pt;font-weight: bold;font-style: normal;text-decoration: none;"
    list-type="ul" list-style="circle" caption="Topic Contents" caption-style="font-family:Arial;font-size:11pt;font-weight: bold;font-style: normal;text-decoration: underline;"
    margin=";;0px;1px" min-heading-level="h2" max-heading-level="h2" flags="7" ?>
    <p&gt;&#160;</p&gt;
    <h2>Adding a New Order</h2>
    <p&gt;Follow these instructions to create a new purchase order:</p&gt;
    French Source
    h1&gt;<a name="Top"&gt;</a&gt;Utiliser le module de commande en ligne</h1&gt;
    <p&gt;Cette rubrique explique comment créer et gérer des commandes NAPA et
    d'envoi direct. (Les commandes spéciales seront disponibles dans une version
    future.) Ces tâches sont effectuées à partir de l'écran <span style="font-weight: bold;"&gt;Gestion
    des commandes</span&gt;. Cette rubrique suppose que l'utilisateur est connecté
    et que la <span style="font-weight: bold;"&gt;Gestion des commandes</span&gt;
    a été lancée à partir de la page de renvoi de TAMS&#160;II. </p&gt;
    <p&gt;Voir&#160;: La rubrique <span style="font-weight: bold;"&gt;Survol de l'interface
    Web de TAMS&#160;II</span&gt; pour des instructions sur les fonctions courantes
    comme le tri des données.</p&gt;
    <h2&gt;Ajouter une nouvelle commande</h2&gt;
    <p&gt;Suivre les instructions ci-dessous pour créer un nouveau bon de commande&#160;:</p&gt;

    The Shuffle can only be linked to one computer at a time if you want to use the Shuffle on a different computer you must allow Itunes to restore the Shuffle and than you can use it. Sorry there's really no good way around this besides going third party.

  • Ipod Nano does not appear in Itunes source

    Hi all
    I have an Ipod Nano and an Ibook, however when i plug my Nano into my Ibook it will not appear in the source menu in Itunes, but the nano does appear on my desktop. I am using Itunes Version 1.1.2, do i need to up grade my Itunes before it will recognise my Nano? If so which version of Itunes will i be able to install onto an Ibook g3 500mhzx running on OSX 10.1.5?

    Your version of Mac OS X is too old to use an iPod nano as anything other than an external flash drive; the compatible iPods with your configuration are the first through fourth generation full-size models and the original iPod mini. You need at least Mac OS X 10.3 before an iPod nano will show up in iTunes.
    All compatible iPods must be connected through FireWire for use with iTunes in Mac OS X 10.15 regardless of the presence of USB connectivity on the iPod. iPods which require an USB connection are not compatible with your version of Mac OS X.
    (21558)

  • Since I have iTunes match, why does my iTunes library not appear in iPhoto music options for slideshow?; only songs purchased or placed on iTunes over a year ago appear in the iPhoto library under the iTunes or purchased option.

    since I have iTunes match, why does my iTunes library not appear in iPhoto music options for slideshow?; only songs purchased or placed on iTunes over a year ago appear in the iPhoto library under the iTunes or purchased option.

    10/20/14
    Yes, I am signed in to iTunes match on the macbook pro, iPhone , & iPad (all updated & correct music libraries) where I bought all the tunes but still no updated tunes on the iPhoto music library after 3 days of being on iTunes match.
    Thank you,
    TMAbanjoman

  • Release Strategy not working for MRP generated PR

    I have one qurey. Currently we are release strategy for normal PR.Now client want to activate release strategy for MRP generated PR.
    current Release Strategy for normal PR configured as following.
    Purchase requisition document     RV
    Purchase requisition document     ZADV
    Purchase requisition document     ZIMP
    Purchase requisition document     ZSER
    Purchase requisition document     ZSTD
    Purchase requisition document     ZSTR
    Purchasing group     A01
    Total value of requisition for     > 1.00 INR
    Creation indicator (purchase r     Realtime (manual)
    Overall release of purchase re     Yes
    For MRP generated PR I add creation indicator B - Material requirements Planning.Even after add creation indicator release strategy is not triggering for PR.
    To trigger PR any setting need to do other than add creation indicator.
    Regards
    Sathish

    Hi
    You don't have to include creation indicator as parameter. Check in what documnet type MRP PR is generated. You can see it in t.code OMDT. At document type level also you can manage it. You need to include creation indicator only if a seperate person approves MRP generated PR.
    To know how to configure release procedure see the below link
    http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE
    Regards
    Antony

  • Adopted Info record price should not be changed in PO

    Dear All
    I do have a requirement that, my company wants to maintain info records for each vendor price combination, and wants user should not change adopted prices/conditions etc in PO while creating the PO.
    Can this be possible without doing any ABAP coding using BADI?
    Thank you

    HI,
    Its possible by MM configuration in Condition type ( PBXX or PB00).
    What u want to do is In the conition type T.Code :M/06
    Under the Changes wich can be made tab, thaer is
    Manual entries  , Plz give' D'     in the tab , that means manual entries not possible.
    Hope it clear,
    Regards,
    Andra

  • Purchasing Info record screen layout not working for ME11

    Dear All Experts,
    I got requirement where GR Based IV and GR should be required for one vendor. So htought to create PIR from where I can make these two fields DEFAULT. So I went to table T162 from where I can make these two fields mandatory for ME11.
    I followed the path : SPRO - Materials Management - Purchasing - Prcahsing Info Record - Define Screen Layout for making fields mandatory for ME11.
    It is not working at all, as well I can see rest irrelevant fields which are not of my use are required. Have I missed any piece of configuration somewhere in MM ?
    Experts guidance from forum will be very much appreciable.
    Regards,
    Revati Joshi.

    HI,
    as you know we can create purchasing info record manually as well as automatic at time of Po creation
    If you mark it in ME11 manually it will be helpful to you
    or you can mark its required field in Vendor master record as well for your vendor account group in following path.
    Logistic general - Bunisess partner -vendors > control > define accont groups and field selection > select your account goups and click on details and double click on purchase data and check for "GR based invoice verification" and mark required field
    Regards
    kailas ugale

  • INFO-RECORD CHANGE MODE  NOT ALLOWING.

    Hi,
    Transaction Code= ME12
    Vendor= xx
    Material= xxxxxx
    Purch. Org= xx
    Plant= x
    Info rec=&quot;blank--&quot;
    Info Category= standard
    Error Msg displayed-
             Missing authorization:Info rec change plant xx
    ABOVE THE ERROR WHAT COULD BE THE REASON?
    BUT that vendor and another material are allowing,but  above particular combination is not allowing.i checked source list ,MM-basic1 view there is no check and block.
    THANKS,
    KUMAR.

    Hi
    Are you sure that the other vendor and material that you are using or the same vendor and other material that you are using are all from the same plant.
    The error message specificaly says that user does not have authorisation for that Plant. So check with some other combinations in that plant.
    Also, on the screen on which it is giving this error message, in the address bar where you write the tcode, type SU53 and enter. It will take you to authorisation check screen and will display which authorisation are missing for the user. You can take this to your basis team and get the required authorisation.
    Regards,
    Vishal

  • Costing issue-Why Info record price is not read ?

    Hi,
    We have an issue while costing a Material procured externally.
    Valuation Variant >>> Priority 1-Info record price. >>Priority 2-Material Master valuation price.
    However, system is picking the price matained in the Material master.
    I have verified the validity of the info record and the Blocks on the Vendor and seems ok.
    Are there any specific checks need to carry out to know if the info record is a valid one.
    Any idea why system is picking Price from Material Master?
    Your help is appreciated.
    Kind Regards
    Umapathi G

    HI Umapathi
    Does any scheduling agreement exists for this info record
    refer this link.. This issue is pretty common these days and has been discussed many times in the forum
    CK11N- Material cost estimate with & without agreement
    Regards
    Ajay M

  • Urgent:SUS PO not appearing in the PO list for vendor's user

    Hi experts,
                       I am working on SUS. SRM5.0 single box scenario. PO is created by the purchaser and is successfully transfered through XI. But this PO is not appearing in the PO list of vendor's user. Please let me know what can be the possible reason.
    following roles are given to the user:-
    SAP_EC_SUS_ADMIN_PURCHASER
    SAP_EC_SUS_ADMIN_VENDOR
    SAP_EC_SUS_BIDDER
    SAP_EC_SUS_DISPATCHER
    SAP_EC_SUS_INVOICER
    SAP_EC_SUS_ORDER_PROCESSOR
    SAP_EC_SUS_SERVICE_AGENT
    SAP_BBP_STAL_BIDDER
    SAP_EC_BBP_BIDDER
    Also checked vendor data. Communication method is selected as XML.
    After creating PO and transfering it - message comes-
    Information  Processing BBP_PO_SEND_XML Is Started  
    Information  Action successfully completed 
    Please help. It is very urgent.
    Thanks and Regards
    Kapil

    Hi Kapil,
    do you have the same result when deleting all roles and only using role SAP_EC_SUS_ORDER_PROCESSOR?
    Are vendors successfully replicated into SRM and a user created via Web
    Txn "Manage Business Partners"?
    Did you maintain table BBP_MARKETP_INFO?
    Did you replicate the company code using Txn BBP_SUS_BP_ADM?
    In any case there is also an inital replication of vendors
    from MM to SUS via BD14 necessary.
    Thanks,
    Claudia

  • Digital PDF Booklets NOT Appearing In My iTunes Library For Some Reason....

    The title pretty much says it all. Had restored my iTunes music files to a new computer along with all the music and any digital PDF booklets that I had. Trust me the PDF booklets are successfully imported on my new pc but for some reason I am having a devil of a time getting them to show up in the iTunes lib. I purchased a new album that had it's own digital booklet and THAT booklet HAS shown up in my lib but for some reason the rest of my digital booklets just won't. Even when I go to the folder in which they are stored and double click on them. They open, but I thought that maybe doing so would automatically add them to my iTunes lib but this is not the case. They ARE on my hardrive, and they DO open up easy enough. Thing is for whatever reason known but to God himself they will NOT appear in my lib. Does anyone have ANY clue as to what I should do?

    PDF files don't carry a tag so if you reimport them all you get is a title. In fact now that iTunes supports PDFs for iBooks they might even default to being categorised as Books (if so, change the Media Kind to Music) otherwise they're likely to be hiding down in the Unknown Artist/Unknown Album section. The iTunes "form" for digital booklet names is *Digital Booklet - <Album>* so if you type "Digital Booklet" in the search box all should be revealed. You need to edit the properties for each one with its Album, Artist & Album Artist so that it can then appear listed with the album it belongs too.
    tt2

  • My camera will does not appear in the drop down for importing videos even though it is listed as a supported camera - sony hdr-xr260

    I am trying to import video footage from my sony camera on to imovie. The camera does not appear on the drop down when i connect it to the pc via usb. Anyone any ideas?

    I'm using a zr500 via firewire and it doesn't recognize it either. Are you using firewire?

Maybe you are looking for