Infocube display request data

Hi,
I see in infocube manage request which failed, how do I can see this request data ?
Thx

Hi,
Select the IC manage>select the request>select the Content button on top (F6). by request by request.
if u want to see all data in IC. select the tab Contents in manage screen -->select Infocube Contents.
Regards,
Madhu

Similar Messages

How to display the request date in query

Hi,
I want to display the No. of request ID and request date in the query, but how could I get the request date?
Can anyone give me some suggestion?
Thanks
Huaiyuan

Hi,
By "request date" you mean the loading process "request date" ?
If so, as Diogo said, add an infoObject in your data provider for this, but you won't be able to collapse anything if that's a cube.
Thanks
Matthieu

Infocube Requests - Data Selection

Hi Gurus,
In the Infocube there were 4 requests, i want to know the selection conditions used in those requests apart from the place Infocube -> Manage -> Request tab.
I need to use that information in ABAP codings, so please give the information like Table names where such information regarding selection conditions stored.
Thanks & Regards,
Balaji.S

Hi There,
The selection conditions are defined inside the infopackage, under tab Data Selection (*) , that generates the request. Normally, these criteria are used to screen out unnecessary records before the load actually begins (for the purpose of performance).
Also in order for any fields to appear in (*), it first must be indicated in the associated data source under the tab Fields (Sel Opts = 1,2,3,7).
Hope this helps. Jen
PS: I should have replied to the author of the thread. I'm sorry Murali M.
Edited by: Jen Yakimoto on Aug 25, 2010 5:02 AM
Edited by: Jen Yakimoto on Aug 25, 2010 5:34 AM

Display ODS data based on Request

Hi,
I couldnt find the option for displaying DSO data based on Request ID, could you please any one help me how to check DSO data based on Request ID.
Thanks
Satya

Hi Satya,
in the management screen of the ODS,
Tab "Contents" use Button "Change Log"
Success,
Udo

BPS You have no authorization for the requested data

We are implementing Hierarchy node based security for our BPS.
When the user tries to display the planning layout, they get the error message "You have no authorization for the requested data "
I have given authorization to the relavant Infocubes, also checked the all the Authorization Relavant Info Objects and added theses Info Object to the custom authorization created in RSECADMIN.
Also added the info objects 0TCAACTVT, 0TCAIPROV, 0TCAVALID to the custom authorization.
In pfcg, this authorization has been added to S_RS_AUTH. I have also given activity 02, 03, 16 values and a * to planning areas, functions, packages, groups, levels, folders, ... to the objects R_AREA
R_BUNDLE
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
But still we get the same error.
Has anyone encountered this problem? Can you please provide me some clues to resolve this issue

Thank you very much Grevaz, but that template does not help.
I did run both ST01 trace and BI RSECADMIN trace. RSECADMIN Trace shows the below authorization failure
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR BETWEEN '4012001000'
AND '4012001999'
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Partially Authorized (Average)   Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
206 ( 0FUNDS_CTR )
Authorization Check Complete
We have created custom authorization and trying to restrict based on hierarchy node.
One point I observed is, when I give access to all nodes with a wildcard * in the custom authorization, then the error disappears and the layout is visble. But our point here is to try to restrict based on the nodes and we cannot give display access to all nodes.

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

How to display the data in XML files into JSP using Jdeveloper.

Hi All,
I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from XML file two should be displayed in JSP Page.
Are there any reference documents, regarding the above process please can anyone guide through how to do it.

Let the servlet ask your business tier to provide the data, then stuff it into beans, and pack those into the Session instance. Then forward the request to the JSP, let the JSP get those beans and display them.

How to Limit the Displaying of Data Using PointTheme over the map

Hi,
I have the following requirement, which i'm trying to implement with <dvt:map & <dvt:PointTheme components.
*The requirement is ... I have a base map, which is being accessed via <dvt:map component. And i'm using point theme to display certain data over the map. Let us consider, over the US map ... i'm displaying 24 points(for each polygonone point .... taking the centroid of each polygon) when the map zoom level is 0.
At this zoom level '0', user can see all 24 points. But when the user start clicking on '+' to Zoom In(Now the zoom level is '1'), at this zoom level user can see only 18 points. User can see the remaining 6 points by dragging the base map to either sides.
This mean, irrespctive of the zoom level the point theme is rendering the all the points over the map. Instead, i would like to display the data specific to the polygons that are visible to the user. At zoom level '0', if the user is able to see all the polygons, then display all 24 points. And at zoom level '1'...if the user is able to see 18 polygons and then display only those 18 points. And if the user tries to see the other polygons data ... user may drag the base map either sides. In that case, the point theme should render data specific to the polygons that the user is able to see.
Similarly, if the user is at zoom level '2'...at this zoom level user is able to see 13 polygons over the IE. so the point theme should render only 13 points specific to each polygon. If the user tries to do dragging the base map either sides...then display the points, specific to the polygons that the user is able to see.
Similarly for other zoom levels ... Please let me know if you require any other information.
Thanks & Regards,
Kiran Konjeti

You'll need to do a little software workaround on the values you read from your counter. But first a little tutorial to explain *why*.
The E-series boards use 24-bit counters. When LabVIEW requests an integer count value, the count is returned in a 32-bit unsigned integer datatype, where the 24 lowest bits represent the value in the board's count register. The upper 8 bits are *always* 0's.
The count register can increment from 0 to 16 million plus (2^24 - 1), then it must "roll over" back to 0 again just like an odometer. Similarly, when it decrements past 0, it next goes to the max value of 2^24 -1 as you observed.
So we need a little software workaround that'll convert (2^24 -1) to (-1) and (2^24 -2) to (-2), etc. The way to do it is to first detect whether the highest bit is a 1. One way is to compare whether the count value is >= 2^23, making sure to use integers to do the comparison. Whenever the value is >= 2^23, subtract 2^24 from it to create your new count value which will then decrement 3,2,1,0,-1,-2,-3, etc. as desired.
Here's a link to a similar explanation. Couple more notes too. First, if this is a continuously rotating encoder, you may still encounter a discontinuity when the revised count value crosses the +/- 2^23 boundary. Second, direct connection of a quadrature encoder to an E-series board isn't recommended because of unrepeatability when measureing direction changes.
-Kevin P.

How to fill a new single field in a Infocube with historical data

Hello Everybody,
We have an SD infocube with historical data since 1997.
Some of the infoobjects (fields) of the infocube were empty during all this time.
Now we require to fill a single field of the infocube with historical data from R/3.
We were thinking that an option could be to upload data from the PSA in order to fill only the required field (infoobject).
Is it possible? is there any problem doing an upload from the PSA requests directly to the infocube.
Some people of our team are thinking that the data may be duplicated... are they right?
Which other solutions can we adopt to solve this issue?
We will appreciate all your valuable help.
Thanks in advance.
Regards.
Julio Cordero.

Remodeling in BI 7:
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
http://www.bridgeport.edu/sed/projects/cs597/Fall_2003/vijaykse/step_by_step.htm
Hope it helps..

OBIEE11g - Report Multi Currency Display (Static Data)

Hi All,
I have a requirement where i need to display amount data in multi currency format in OBIEE 11g like LCY and OCY format.User have to select the currency type like USD,YEN,EURO and resulting amount data in report should display in that currency format.
Pls suggest me is it required to do ETL Changes i.e we need to load data in Database in multi currency format
can we do this at Report level i.e can convert the amount in required currency format.
Note: Spot rate is currency data it's loading by monthly its a static data.
please refer my expected output screen short:
http://imageshare.web.id/images/0dnlgxlvmhl7u5tdbac1.jpg
(currently we are displaying one currency now we need to show multicurrency)
Just FYI...
joins:
"GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."OCY" =
"GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."ORIG_CURRNBR"
AND
"GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."PPN_DT" = "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Business_Date"
here ocy & ORIG_CURRNBR is the foreign currency (i.e: USD,YEN,EURO etc)
Calculation part:
CASE WHEN "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Product_Type" IN ('Bond', 'Bonds', 'Callable Bonds')
THEN "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Nominal_AMT" * "GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."NON_DISC_SPOT"
WHEN "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."Product_Type" ='Equities' THEN
("GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."MKT_VALUE" - "GPC_DataMart"."GPC_DataMart"."dbo"."IW_POSITION"."CAPITAL_GAIN" ) * "GPC_DataMart"."GPC_DataMart"."dbo"."MX_SPOT"."NON_DISC_SPOT"
END
in the above calc amount * spot_rate
I already refer the below one but it wont suite for my case:
http://www.rittmanmead.com/2010/06/oracle-bi-ee-10-1-3-4-1-currency-conversions-fx-translations-part-1/
http://gerardnico.com/wiki/dat/obiee/currency
Thanks in advance
Regards,
Deva
Edited by: Devarasu on Nov 16, 2011 3:13 PM

Hi Deepak,
our table will like below one,how we can calculate on fly calculation for this,
in my dashboard MX_spot.ocy prompt column --> set request variable.
how i can use this request variable in RPD-->BMM --> logical expression?.
Table 1: Postion (Fact)
PRODUCT_ID      ORIG_CURRNBR     (Nom+Capital+PREM_DISC_AMORTISE) Business_Date
========================================================================
HKD T-NOTE 1312     CN1      48407.555               31/10/2011
HKD T-N 07Y1402     HKD          -45000.23               31/10/2011
Table 2: Mx_Spot (all currency with static rate)
OCY     NON_DISC_SPOT     PPN_DT
SGD     0.1962748     31/10/2011
HKD     0.1605621     31/10/2011
CN1     1     31/10/2011

To Display a date field in TSTCT table

Dear Experts,
Recently we got a request to have a date field in TSTCT table. So, that when ever the new transaction is created the date will automatically display in TSTCT table. Now there is only three fields in the table. There is no further settings to regarding the display of date field. Is there any possible cases/BADI's which helps to display the Date field in TSTCT Table. Please help me with possible solutions.
Thanks in advance, Regards,
Harsha.

Dear Eswara,
It is not possible adding field through BADI or exit. But you go into /nSE11 for this table and go to Technical Settings, if the check box 'Log Data Changes' is set then you may be able to display a log of changes made to entries in this table using /nSCU3.
Regards,
Abbas.

Display all dates between date range (Time Dimension left outer join Fact)

All,
I have done some searching around this issue but within all the posts regarding date variables, date prompts and date filtering I haven't seen one exactly answering my issue (maybe they are and I just dont have my head around it correctly yet).
My report requirement is to allow a user to select a start day and an end day. The report should show all activity between those two days - AND display 0/null on days where there is no activity. That second part is where I am getting hung up.
The tables in question are:
TimeDim
EventFact
CustomerDim
My BMM is setup as follows:
TimeDim left outer join EventFact
CustomerDim inner join EventFact
If I run a report selecting DAY from TimeDim and a measure1 from EventFact with day range 1/1/2010 - 12/31/2010 .. I get a record for every day and it looks perfect because of the left outer join between TimeDim and CustomerDim.
But .. if I add in a field from CustomerDim, select TimeDim.DAY, CustomerDim.CUSTNAME, EventFact.MEASURE1, OBIEE only returns records for the days that have EventFact records.
This is due to the fact that the TimeDim is still outer joined into EventFact but adding in CustomerDim makes OBIEE setup an inner join between those tables which then causes only data to be returned where EventFact data exists.
There is a way around this in this simple case and that is to define the relationship between CustomerDim and EventFact as an outer join as well. This will give the desired effect (but an outer join between these two tables is not the true relationship) and as I add additional dimensions and add additional logical sources to a single dimension in the BMM it gets complicated and messy.
Ive also messed with setting the driving table in the relationship, etc.. but it has not given the desired effect.
Has anyone ever encountered the need to force display all dates within a specfied range with a fact table that may not have an entry for every date?
Thanks in advance.
K
Edited by: user_K on Apr 27, 2010 11:32 AM

It worked!!!* Even my time drill downs and date based filtering still work!
That is awesome. Never would have thought of that intuitively.
Now, just need a little help understanding how it works. When I run my report and check the logs I can see that two queries are issued:
Query 1: Joins the fact table to all the associated dimensions. I even changed all the relationships to inner joins (which is what they truly are). And calculates the original measure. If I copy and paste this query into sql developer it runs fine but only returns those rows that joined to the time dimension - which is what was happening before. It is correct but I wanted a record for every time dimension record.
Query 2: Looks like the following:
select sum(0)
from timedim
where date between <dateprompt1> and <dateprompt2>
group by month *<--* this is the time dimension level specified in Query 1, so it knows to aggregate to the month level as was done in query 1
Final Question: So what is OBIEE doing ultimately, does it issue these two requests and then perform a full outer join or something to bring them together? I couldn't see anywhere in the log a complete query that I could just run to see a similar result that I was getting in Answers.
Thanks for all the help .. Id give more points if I could.
K

Request Date Quantity

Hello -
In the availability window, request date qty value is being shown. Can anyone help me know where this field - request date qty is being stored? What table is being used to populate this information. I've found one table MRP_ATP_SCHEDULE_TEMP but this table has more than 1 records in every line id of the sales order line details. And I think the only unique in this table is the session id. However, session id is not being used in the sales order tables. So there is no way I could join those tables to return 1 record.
Any help would really be appreciated.
Thank you,

This is not stored anywhere. The idea is to display current data.
The data are populated by an API INV_Quantity_Tree_PUB.Query_Quantities
Thanks,
Mehabub

Request date is missing.

Hi,
I am working in SAP BI 7.0 version.
The request date which appears in the Infocube Manage is missing.
Any help please.
Thanks,
Arul antony.

Hi Prem,
The support pack what we are using is SP9.
Thanks
Arul antony.

Infocube display request data

Similar Messages

Maybe you are looking for