Infoset problem: rollup issue

Hi,
I have a problem in Infoset.
Actually i built an infoset based on two infocubes.
One cube has - Customer, revenue, cost
Other cube - Customer, name, address
1st Cube
Customer     Period/fiscal year      Fiscal year         Revenue    Cost
A                  01/2008                  2008                   10             5
A                  02/2008                  2008                   20             2
B                  02/2008                  2008                   30             5
2nd cube
Customer     Name          Address
A                John            12 street
B                michael       45 street
Now im getting value while doing infoset
A          John           12street         01/2008       2008      10            5
B          michael       45 street       02/2008       2008       30           5
It doesnot consider the line 2 of 1st cube. I want it to rollup and show revenue and cost as 1020 and 52
How should i do that?
Regards

Are you using inner join or left outer join?
Checkout the below thread if this is of use.
InfoSet Joins - Left Outer Join problems

Similar Messages

BPC Alternate hierarchy rollup issue - require help

Hi All,
We are seeing a rollup issue on Alternate Hierarchies. We had set-up alternate hierarchies on our Country Dimension (DC) to assist some managerial reporting that is only relevant to one of our Operating segments.
To show the problem, I am listing an example of our Country dimension member sheet. I have put "**" delimiter between the pertinent values to show which columns the values land under.
ID*DescriptionPARENTH1PARENTH2FORMULAH1*FORMULAH2
MAIN_HIER*Main Hier* ** ** ** **
D1*DC EuropeMAIN_HIER* ** ** **
A*Country AD1SG1* ** **
B*Country BD1SG1* ** **
C*Country CD1SG2* ** **
D*Country DD1SG3* ** **
D2--DC India*MAIN_HIER* ** ** **
E*Country ED2--ALT_HIER* ** **
C1*Calc Eur* ** *DC.H1.D1+DC.H1.E* **
ALT_HIER*Alt Hier* ** ** ** **
SG1*Sub Reg 1* *ALT_HIER* ** **
SG2*Sub Reg 2* *ALT_HIER* ** **
SG3*Sub Reg 3* *ALT_HIER* ** **
We have our main Country hierarchy that comes under the root parent MAIN_HIER. In addition to that on our main hierarchy we had a calculated node for Calc Europe (C1) which is supposed to be a summation of DC Europe (D1) + Country E (E). We had created an alternate hierarchy to represent a breakdown by more subregions (SG1, SG2, SG3 and Country E) within DC Europe so basically the root node of the alternate Hierarchy (ALT_HIER) should show the same amounts as the calculated node C1 on the main hierarchy.
If we take a higher level Account dimension member like NET_SALES the values tie out but if we take a base member in the Account Hierarchy (e.g one representing Customer Sales), the values don't match with the ALT_HIER values seem being the wrong ones. It almost seems like the rollups of the Alternate Hierarchy are not accurate.
Could you pls. shed some light on if the dimension member set-up above is wrong from any angle.
BTW, we are on BPC 7.0M SP04 Patch 2 and SQLServer version is SQLServer 2005 EE SP3.
Your insights would be greatly appreciated. Thanks in advance.
Regards,
Abhay Shanbhag

Abhay:
Please try below...
Add "RollupChildren(Account.Hx.CurrentMember,"+") to all non-base members who don't aggregate properly under FORMULAHx. For instance, I have below hierarchy PARENTH1 for Balance Sheet Total Asset
BALSHEET
TotalAsset
-CurrentAsset
-NonCurrentAsset
If CurrentAsset and NonCurrentAsset all roll up fine but TotalAsset doesn't add up. In your Dimension, put MDX formula RollupChildren(Account.H1.CurrentMember,"+") for TotalAsset and BALSHEET under FORMULAH1.
We have this issue when we created additional hierarchies, and it took us a while to debug before I got this hint from SAP Support. Ever since it works like a charm =)
Hope this helps
Brian

Problem in Issues/message table problem in RMMAIN

Hello ,
I have a problem in Issues/messages table in tx RMMAIN
Problem:When i click on create "Issue" tab in RMMAIN,issue tab is disabled.
Please let me know what i have to do?
Regards,
Neni

Hi,
Is this problem with a roadmap assigned with a project or a roadmap not yet assigned with a project?
If this roadmap is assigned with a project, then:
1. Go to tcode: SOLAR_PROJECT_ADMIN->select the project to which this roadmap is assigned.
2. Go to tab->Project Standards->Select the tab "TABS".
3. Check the visibility of the tab "Issues/Messages". It should be "Visible".
If still the problem persists, then check whether you have this SAP_RMMAIN_EXE authorization.
Check also that you have activated BC sets for service desk.
SOLMAN40_SDESK_BASICFUNC_000
SOLMAN40_SDESK_TPI_ACT_AST_001
SOLMAN40_SDESK_ACTIONLOG_001
SOLMAN40_SDESK_ACT_ADVCLOSE_001
SOLMAN40_SDESK_TEXTTYPES_001
Let me know if this not solved your issue.
Regards,
Sanjai

What kind of real time problems and issues arise in Data Modelling

Hellooo experts,
I am not a BW expertise, so just want to gather some knowledge on Problems and issues related to DATA MODELLING, if any body have a document or a link can you please snd it to [email protected] or reply to this post. I promise to reward you for proper answers hope this is the way i say thanks for your help.
kishore

hi kishore,
The first and most important problem is to understand Clients requirement. Clients even some time not aware of how to utilize efficiency of BW, as they are very much use to with traditional SAP R/3 reporting. So most of time we have to suggest options to client.
If we come to technical aspect, than identifying Key Figures and Characterstics is the most important task. And how you map that to available infoobjects. Attributes also plays major roles, like which attributes is better to use as navigational one and which as exclusive attribute.
Their is long list for data modelling issues, its better you refer either Mastering BIW book by Mac'Donalds. And SAP Help Library is also having good material.
regards,
kamaljeet

InfoSet problem with BI 7

We have a query on an InfoSet in production system (BW 3.0B) that is working fine. The same query on the same InfoSet in development system (BI 7) is not displaying master data attribute values. It does show values only for navigational attributes.
My team and I have separately verified that the master data exists and active.
Obviously we don't want to mark the attributes as navigational just so we can display the data in the reports.
A quick search in OSS did not return any applicable SAP Notes.
Does anyone know what has changed in BI 7 and how to overcome the issue? Thank you very much for your help.

Hi SK,
1. Use transaction RSD1 -> enter the name ZUCESID.
2. Go to master data/texts tab check if the "Character is Infoprovider" flag is set or not
If this flag is not checked, then check the flag and assign a infoarea to it.
Assign points if helpul
Regards, Uday

Repeated iMac Problems, Display Issues now Kernel Panics

I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
But this morning, this is what I woke up to:
http://img97.imageshack.us/img97/7436/photoijr.jpg
The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
Here are my specs on this computer:
2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.

Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
- I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
- I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
With that in mind, I think we're still having graphics card issues or more seriously some logic board problem.

Problems or Issues in Go Live & Support Phase

Hello,
Can anyone help me with more description in Support Phase................ i have couple of questions.
What are the responsibilities in a Support Phase of a Implementation project faced by Support team?
What are the common issues / problems to which they provide support?
kindly help
thank u

is this SCM specifc support and what is the level of support.
you probably can get a book written as an answer on the couple of questions
suggest you take a look at the ASAP methodology - production support strategy
http://service.sap.com/asap
and look at the roadmap - phase 5
also there would be varouos support methodologies mentioned in various consulting company websites that might help you build your own
as for common issues/problems... totally depends on your support level
could start form BAU support to only high level trouble shooting...

IWeb basic problems? Issue with galleries

Hi,
A while ago I posted a question about a photo gallery I was trying to display, which went something like:
"Hello,
Just finished putting together a website for my brother but having issues with the gallery. I have a portfolio page for his photos. When I'm in iweb the photo album covers scroll nicely between images and link straight to the photo gallery page. But when I put it online I click and nothing happens, as you can see here:
http://www.guycollier.com/guycollier/EdmundCollier_Theatre_Photography_My_Portfolio/Edmund_Collier_Theatre_Photography_MyPortfolio.html
Does anyone know why? This is driving me crazy. I have deleated and uploaded the sight several times from iWeb and also Filezilla and Cyberduck but have the same issues. Please help!
ps. also if anyone knows how to set the title of the page in the browser then that would be great too!"
I have finally got the time to get back to it and have been trying various options suggested by users, including deleating and rebuilding the gallery, but it still doesn't work either online or on a local hosting. It was suggested that I might have some basic iWeb problems. Any idea what these maybe and how they might be resolved?
Thanks
Guy

Thanks for the suggestion. I rebuilt it and without making any changes to the layout it seemed to work ok. However, when I have made some minor changes (putting a frame around the images, changing the layout slightly, removing the navigation menus) it no longer works. Any idea? Might I be deleting something by accident?
Guy

Problem with Issuer of Signerinfo

Hi,
I have a prblem with the Issuer in the signerInfo.
SignerInfo si = new SignerInfo(
new X500Name(x509.getIssuerDN().getName()), // X500Name issuerName,
serial, //x509.getSerialNumber(), // BigInteger serial,
AlgorithmId.get(digestAlgorithm), // AlgorithmId digestAlgorithmId,
authenticatedAttributes,// PKCS9Attributes authenticatedAttributes,
new AlgorithmId(AlgorithmId.RSAEncryption_oid), // AlgorithmId digestEncryptionAlgorithmId,
signedAttributes, // byte[] encryptedDigest,
null); // PKCS9Attributes unauthenticatedAttributes
Issuer with some certificates doesn't give back a correct result. If we turned pkcs7 binary, it gives back 0x13 and it would have to give back 0x0c. This problem doesn't happen if we make the PKCS7 with capicom or other languages.
This problem is only with Java. Is it a java bug?
Thanks

Can anybody pass on the reverse code. I have one, but
its faulty.Post it, I'm sure we can fix it...

Weird problem - having issues *only* with 1UP's podca

I subscribe to a lot of podcasts - UP, IGN, TwiT, etc., and they all work fine instead of UP's. However, it doesn't appear to be a problem on their end.
If I download their podcasts via Juice or directly from the web site, they work fine. However, if I download any UP podcast using the Zencast application, the duration of the podcast appears incorrectly while playing it on the Zen. The podcast continues playing past the "end time", however it makes seeking and resuming playback a pain in the butt.
With every other podcast I subscribe to, this does not happen. Any ideas?

It seems to have something to do with the way up handles the podcast information. I've worked out a (slightly) less annoying way of dealing with the issue, although it does require you to have the mp3 handy, so you don't get the convenience of using a podcast organizer.
1) Head to http://audacity.sourceforge.net/download/ and download the Audacity audio editor. (It's absolutely free and really small)
2) Download up podcast
3)Load the podcast mp3 into audacity. (File > Open)
4)Save the podcast as a new mp3 (File > Export as Mp3)
Now just load the file into your Zen, and it should show up as the proper length. Unfortunately, while it isn't the most elegant solution, it's the best I think you'll be able to do, because I believe the problem is on up's end.
Hope this hel
ps.

Modifying the Ad-hoc Query Infoset : problem with P9105 fields.

Hi all,
Am having problem with Infoset of Ad-hoc Query .
i need to add the Critical role Field Group to ZHR_PA_01 Infoset of Satandard Area.
for this i have imported that Infotype 9105 and included the following standard fields by drag and drop.
                1. Role Category
                2. Role SubCategory
                3. Global Identifier
                4. Personnel Number
and then Saved and Generated the infoset succesfully.(No syntax errors)
But
While testing, using the T-Code: S_PH0_48000510
if i select one of these above fields for the report,
Am getting the message that "Error when generating the report".
Error Description:The report cannot be generated because the internal description is invalid or incomplete.
means what may be the problem.?
if i select other fields its working fine.
can any body explain me clearly..??
Regars,
Kalam A.

Hi Manoj,
yes, i have saved the T-code.and generated the Infoset Succesfully.
and its showing the those additional fields while testing.
for remaining fields its working fine.
but am not getting wats problem with the four fields of P9105 infotype.
could you please suggest me.?
Regards,
Kalam A.

Problem with issuing command via CustomScriptExtension

I am trying to issue a CustomScriptExtension command to an Azure virtual machine from within my C# application. The CustomScriptExtension is installed in the VM and working. I verified this by issuing a test command via PowerShell. Essentially I am trying
to execute what would be the equivalent to the PowerShell command Set-AzureVMCustomScriptExtension, but in code.
Below is the code segment that I am having problems with:
ComputeManagementClient client = new ComputeManagementClient(AzureSessionInfo.CloudCredentials);
IList<ResourceExtensionReference> extReferences = new List<ResourceExtensionReference>();
IList<ResourceExtensionParameterValue> extParamValues = new List<ResourceExtensionParameterValue>();
string account = "{\"storageAccountName\":\"" + AzureSessionInfo.StorageAccount + "\",\"storageAccountKey\": \"" + AzureSessionInfo.StorageAccountKey + "\"}";
string scriptfile = "{\"fileUris\": [\"" + "https://teststorageaccount.blob.core.windows.net/testcontainer" + "\"], \"commandToExecute\":\"powershell -ExecutionPolicy Unrestricted -file " + "ScriptName.ps1" + "\"}";
byte[] bytes1 = System.Text.Encoding.UTF8.GetBytes(account);
bytes1 = System.Text.Encoding.UTF8.GetBytes(account);
string ScriptPrivateConfig = Convert.ToBase64String(bytes1);
byte[] bytes2 = System.Text.Encoding.UTF8.GetBytes(scriptfile);
bytes2 = System.Text.Encoding.UTF8.GetBytes(scriptfile);
string ScriptPublicConfig = Convert.ToBase64String(bytes2);
ResourceExtensionParameterValue extRef_Parameter1 = new ResourceExtensionParameterValue()
Key = "CustomScriptExtensionPrivateConfigParameter",
Value = ScriptPrivateConfig,
Type = "Private"
ResourceExtensionParameterValue extRef_Parameter2 = new ResourceExtensionParameterValue()
Key = "CustomScriptExtensionPublicConfigParameter",
Value = ScriptPublicConfig,
Type = "Public"
extParamValues.Add(extRef_Parameter1);
extParamValues.Add(extRef_Parameter2);
ResourceExtensionReference extRef_CustomScript = new ResourceExtensionReference
Name = "CustomScriptExtension",
Publisher = "Microsoft.Compute",
Version = "*",
ReferenceName = "CustomScriptExtension",
ResourceExtensionParameterValues = extParamValues
extReferences.Add(extRef_CustomScript);
AzureSessionInfo.CloudServiceName = "CS1000001";
AzureSessionInfo.VMName = "CS1000001";
AzureSessionInfo.ImageFamilyName = "Windows Server 2012 R2 Datacenter";
client.VirtualMachines.Update(AzureSessionInfo.CloudServiceName,
AzureSessionInfo.VMName,
AzureSessionInfo.VMName,
new VirtualMachineUpdateParameters
RoleName = AzureSessionInfo.VMName,
ResourceExtensionReferences = extReferences
I receive the following error message back from the call:
BadRequest: Invalid extension reference parameter value in JSON configuration data for the Role: CS1000001, Reference name: CustomScriptExtension.
I could only find very little documentation on this. Any help would be appreciated.

Thanks Mekh... after many hours of researching and trial/error, I figured it out.
The MSDN article I used previously led me down the wrong path. (see article here: http://msdn.microsoft.com/en-us/library/azure/dn781373.aspx). This may work for RESTful calls but not for .NET API calls.
The part of the code that was hurting me was where the command strings (account and
scriptfile) were being converted to Base64 encoding. This is NOT correct for .NET calls. Once I removed that, everything worked fine.
I came across this after researching the same commands used by Linux scripts. They don't convert to Base64 either so I wonder why this is included in the documentation at all.
In either case, I figured it out, but the documentation is very poor in this area (or all together non-existent). I don't even see where it is documented as to which JSON parameters names are supposed to be used, or even that JSON is required.
Also, related to the Update command, if you are truly "updating" the config, you must include everything about the original config (whether it changed or not) along with the changes you want to make. If not then you will undo ALL but the changes
you issued via the command.

Yet another "unable to find root device" problem (pacman issue) SOLVED

During this night I've been trying to solve a problem that let me without access to my ArchLinux partition.
Booting the kernel.
:: Starting udevd...
done.
:: Running Hook [udev]
:: Triggering uevents...done.
Waiting 10 seconds for device /dev/by-uuid ...
ERROR: Unable to find root device '/dev/by-uuid'.
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
[rootfs /]#
The thing is that I've read about chrooting, I did chroot following the steps described on the Wiki https://wiki.archlinux.org/index.php/Change_Root but I have a problem with pacman and it's that I can't use pacman on chroot, it says: command not found. I must've done something wrong but I have no clue.
My disk is sda1 and I don't use a special partition for /boot or /home.
Thank you in advance.
Last edited by ffuentes (2012-08-17 04:33:38)

I've solved the mystery.
Well, I realised that I had another serious issue with filesystem (that was mentioned on the Archlinux's news https://www.archlinux.org/news/filesyst … equired-1/ and https://www.archlinux.org/news/the-lib- … a-symlink/ ) so I had to figure out which packages were using /lib to remove them. Also I had to disable pacman's signature checking system because as I said before it didn't seem to work.
After removing every package that happened to use /lib at that time I eventually could perform the command "pacman -Syu" and later on "mkinitcpio -p linux" worked out.
Thanks DSpider.

Problem in issuing RM's in spcl stock to vendor in subcontracting scenario

Hi all,
Scenario:
I am working with Make to order scenario. In this scenario, the client is sending 2 raw materials to the vendor and the vendor is adding 2 more raw materials and assembles all the RM's to manufacture semi finished product. After that, our client will do GR for that semi finished and use that SFG for finished goods production. I will run MRP against sales order in MD50 so that all the raw materials procured will come under special stock.
Issue:
Now my problem is i am not able to issue the raw materials under special stock to the vendor. Is there anything to do from PP point of view to solve it.
Please let me know in case of any clarifications.
Regards,
Krishna Chandra

Hello,
You can use operation subcontracting.
Please find the the link below to see operation subcontracting in detail:
http://www.sap-img.com/production/two-types-of-subcontracting-relevant-for-pp.htm
Regards,
Alok Tiwari

New Problem, Old Issue. Ethernet not Working

You may recall this thread: http://forums.verizon.com/t5/FiOS-Internet/FIOS-Ethernet-not-working-Wireless-works-fine/td-p/203838
If you do, well, I have the same issue once more. It's driving me a bit nuts, to be perfectly honest.
About 10 days ago I finally had a stable ethernet connection on my Desktop machine to the internet. 8 days ago I marked the other thread as solved as it was still working and thought that my problems had been solved. Unfortunately, here I am 10 days later and suddenly, without warning, the ethernet connection on my Desktop loses internet connectivity.
I tried turning the router off and then turning it back on, but none of that worked.
Right now it switches between two different states without little indication as to why it switches between them except that it tends to only do it as a I unplug the cable and then plug it back in. The two states are simply connecting to an "Unidentified Network" which is much the same as the problem I had before, and connecting to an "Unidentified Network" with "Internet Access", except, none of the applications that use internet on the computer actually have Internet access even in this state. The Unidentified Network is the key to knowing I still don't truly have internet access.
Windows Firewall is off. It's actually been off for awhile now because I forgot to turn it back on after I initially shut it off trying to get it to connect before. Windows 7 (64-bit) is up-to-date, so that's not the issue either. But something is at issue here and I'm not sure what it is. Since the Wireless works, and the Desktop downstairs works on the ethernet, I can only assume it's something with this Desktop. But I'm not sure what it is or why it's doing this.
Any help with isolating the problem so I can actually fix it and not wait almost two weeks for it to magically work again would be immensely appreciated. Thank you.

Hello there Viafax and Spacedebris!
Apologies for not responding sooner. I decided to take a look at a Windows 7 support forum to see if the issue was something specific to that. After explaining in detail, I got this post and I followed the steps. I posted the information I got and then tried the duplex thing.
The default setting it seems is "Auto Negotiation" which obviously wasnt working.
I tried 100 Mbps Half Duplex and suddenly I had a connection. I can connect to the internet on my Desktop! So I tried 100 Mbps Full Duplex and.... no connection.
So, right now it's set to Half Duplex. But I don't even understand why it would need to be Half instead of Full, or the benefits or disadvantages to either. Right now it's working, but I wish I understood more.
The 192.168.1.25 may have been a typo, since I set the device to run off a static IP of 192.168.1.125, to my knowledge no device on the network has 192.168.1.25
But other than that brief typo, I do believe the rest of the information is as accurate as I could make it. I typed it as I looked for it, so even if it seems odd, that's what it was.

Infoset problem: rollup issue

Similar Messages

Maybe you are looking for