Infotype Creation

Hi All,
        I have created a custom infotype with time constraint 2 which has the multiple records for pernr.( Similar to Infotype 0168).
When i am inserting the record since there is same key for the pernr its not inserting the data in the table pa9001. so i tried to insert by means of adding the  SEQNR and inserting the data. But there is an error poping up saying  "Sequence Number 001 not permitted"  its not allowing me to enter the value.
Can you please help me.
I have used the USER EXIT for inserting the data.
Thanks
Yogesh

As Subhash said, you need to create IT with time constraint 3.  With time constraint 3, if you creating more than one record on same day, the SEQNO increments.  If day differs (BEGDA, ENDDA) SEQNO starts with 0.  If time contraints 2, gaps are allowed, (BEGDA, ENDDA) should be different.
Check T777Z entry.
Regards,
Ramki.

Similar Messages

  • Pa custom infptype and org management infotype creation

    hi experts,
    pa custom infptype and org management infotype creation
    steps are same or not.
    If  any difference b/w both plz give me step by step procedure.
    Regards,
    Sandeep

    PA infotype will create in PM01  everything we need fill from PM01.
    OM infotype
    :- 1. we need to create HRI9XXX  structure.
       2. PPCJ t-code  u can create from this t-code.
    PA INFOTYPE CREATION
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the `Employee Infotype' radio button.
    4) Select the `PS Structure Infotype'.
    5) Click on Create. A separate table maintenance window appears.
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on `All' push button. It takes a few moments.
    10) Click on `Technical Characteristics' . Infotype list screen appears
    11) Click on `Change'(pencil) button
    12) Select your Infotype and click on `Detail' (magnifying glass) button
    13) Give `T591A' as subtype table
    14) Give `T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on `Infotype Characteristics' . Infotype list screen appears
    18) Click on `Change' (pencil) button
    19) Click on `New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement.
    25) In the PM01 initial screen.Select `Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select `Layout Editor' and click `Change'.
    27) Screen default layout appears.here you can design/modify the screen.. change the attributes of the fields. etc.
    28) Save and activate. (Don't forget to `Activate at every level)
    Edited by: sapabap229 on Aug 30, 2010 11:19 AM

  • Organization  Management/ Personnel Development Infotype Creation

    Hi Experts,
    Like  Personnel Administration Infotype 9xxx,
    xxx- series.which are created using PM01 Transaction.
    What is the approach to create Organization  Management/ Personnel Development Infotype Creation.
    Do they have series 9xxxx.
    Please advice.
    Thanks in Advance.
    Regards,
    IFF

    Hi irfan,
    Have u checked this thread?Have a look at the pdf mentioned in the thread.
    how to create OM Infotype
    Check ur gmail as well.
    Regards,
    Manoj.

  • PD Infotype creation

    hello all,
    can anyone guide me on PD infotype creation?
    With all neccesary steps or links for the same,
    Thanks in advance,
    Yashvi

    Hi,
       This was posted by some one else. I do not remeber the link. The following is the procedure
    Enter the transaction code PPCI
    Enter a four digit infotype number (9nnn) and an infotype name.
    Select Field Infotype
    Choose Infotype Create.
    Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
    Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
    Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
    Press the Maintain button.
    From the list of Infotypes locate the custom infotype created and select the entry for that.
    Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
    The screen for Change View Time Constraint would appear.
    In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
    Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
    Create a new entry here for your infotype and save it.
    Regards
    Vick

  • Custom infotype creation issue

    Hi Experts,
    I have a requirement to create a custom infotype based on certain conditions. But there is a problem while saving data in the infotype. The infotype is populated from another infotype automatically through dynamic actions.
    But while saving the data for the first time it happens as per the requirements and data gets saved properly.
    But when the data is saved for the second time for the same pernr , the previous data is over written even though the new record starts with a different begin data.Also i have created the infotype with time constraint '1'.
    can you please let me know if i am missing anything while creating or is this a logic issue .? all the logic has been coded in the flow logic part of the screen.
    also if i dont save the data in the infotype it does not pop up any message like 'data not saved' which usually happens with every infotype. Please clarify me on this as well...
    Thanks,
    Raj Thilak.

    Hi,
    Check the logic how it is updating the custom infotype . I think it is nothing to do with creation of custom info type
    Regards
    Krishna

  • Infotype creation validation

    Hi
    I need to validate the creation of record in a custom infotype such that the record can be created or exists only when there is a record in another subtype of the same infotype. Please can you advise what would be the best way to achive this?
    Regards
    Rajeev

    Hi Rajeev,
    You will have to use USER EXITs for this purpose.
    While saving this particular custom infotype of yours you can query the PA9XXX table for the other subtype.
    If it exists then you can continue saving or else you can throw an error message.
    Please contact your HR ABAP person to look into it.
    Hope this helps
    -Ajay

  • About Infotype Creation in ECC6.0

    Hi All
    Actually my requirement is create a custom infotype and use this infotype in pa30.Buy i am using ecc6.0 version.
    I know in 4.7 version only. Try to send me steps about create infotype in ecc6.0 version.it is very urgent requirement.
    Regards
    hari

    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Regards.

  • About new infotype creation ?

    Hi Experts,
    I want to create new infotype in PD.
    Will any one help me how to start with.
    Before creating infotype whether we need to create structure.
    How to create the structure HRI9xxx.
    *Please give the step by step procedure and t-code to create theHRI9xxx structure,Pxxxx,any tables like T777 etc.
    *Suggest some links to create these things.
    *Give step by step procedure to create structure and Infotypes.
    Helpfull answers are rewarded for sure.
    Thanks,
    Sakthi C

    Steps to create a HR Infotype:
    1) Go to Transaction PM01.
    2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
    3) Select the 'Employee Infotype' radio button.
    4) Select the 'PS Structure Infotype'.
    5) Click on Create... A separate table maintenance window appears...
    6) Create a PS structure with all the fields you want on the Infotype
    7) Save and Activate the PS structure
    8) Go back to the initial screen of PM01.
    9) Click on 'All' push button. It takes a few moments.
    10) Click on 'Technical Characteristics'. Infotype list screen appears
    11) Click on 'Change'(pencil) button
    12) Select your Infotype and click on 'Detail' (magnifying glass) button
    13) Give 'T591A' as subtype table
    14) Give 'T591S' as subtype txt tab
    15) Give your subtype field as subtype field
    16) Save and come back to PM01 initial screen
    17) Click on 'Infotype Characteristics' ... Infotype list screen appears
    18) Click on 'Change' (pencil) button
    19) Click on 'New Entries'
    20) Enter your Infotype number and short text
    21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
    22) Save your entries.
    23) Now the Infotype is created and ready to use.
    24) If you want to change the layout of the Infotype as per your requirement...
    25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
    26) In the next screen.. Select 'Layout Editor' and click 'Change'.
    27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
    28) Save and activate. (Don't forget to 'Activate at every level)
    Subtype Creation :
    Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
    Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
    Subty.text tab is T591S and time const tab is T591A.
    See:
    http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
    HR related site:
    http://www.sapdevelopment.co.uk/hr/hrhome.htm
    Enhancement of Infotype
    Check the following
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
    Infotype Enhancement overview screen
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
    Reward points if uesful.

  • Issue in radio button group in module pool in infotype creation

    Hi,
    I have a custom infotype,where there are six radio buttons belonging to same group for different mode of payment.Issue is when user clicks a radiobutton,a subscreen opens .there are six different subscreens when user clicks on each of the six radio buttons.
    Requirement is when user clicks one button ,one subscreen opens but the other radio buttons(whcih are eligible to be open) gets disabled .I have tried to handle the issue manually through coding ,but i think the issue is with the radiobutton grouping.
    How to make the other radio buttons open for input even when the user has clicked on one button and the subscreen opens corresponding to the screen so that the imemediately ther user clicks on another radio button and get the corresponding subscreen opened for him.Pls advise.

    I have written a custom module in PBO section of my custom infotype.There i have written this code:-
    LOOP AT SCREEN.
        READ TABLE  fp_it_payment_opt_open INTO wa_payment_opt_open WITH KEY scrname = screen-name.
        IF sy-subrc = 0.
          screen-input = c_input_on.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    The internal table it_payment_opt contains all the radio buttons and checkboxes and is populated when the radio buttons and checkboxes are turned input on while modifying the screen depending upon course of my price and personnel subarea.
    While calling subscreen area in PBO,the radiobuttons get into a state of input-off automatically.so i have written a z-module after
    the module hidden_data .
    PROCESS BEFORE OUTPUT.
            general infotype-independent operations
      MODULE before_output.
      CALL SUBSCREEN subscreen_empl   INCLUDING empl_prog empl_dynnr.
      CALL SUBSCREEN subscreen_header INCLUDING header_prog header_dynnr.
            infotype specific operations
      MODULE p9300.
      CALL SUBSCREEN subscreen_area INCLUDING subscr_prog subscr_dynnr.
      MODULE hidden_data.
      module z_open_paymnt_optns.
    My problem has been solved ,hence am closing the thread.Thanks to all of you.

  • Problem in creating help input for custom infotype creation

    Hi,
    I had the task of creating a custom infotype for storing recruitment test result.
    I created it using the following structure:
    Component ______________Data Element
    TEST_TYPE______________ZTEST_TYPE
    TEST_DATE
    LOCATION
    PIC_____________________RFPER
    EX_PIC
    TEST_RESULT____________ZRESULT_TYPE
    STATUS_________________ZSTATUS_TYPE
    OTHER_POSITION_________PLANS
    Now for the component other_position for the entry help i use is H_T528B with check table T528B. My objective is, when the infotype is accessed through pa30 and user is inputting the entry, when they press F4 on the inputbox for other_position, help search should show the list of all position within the system. But rather than that, the input help display such message:
    No values selected
    Maintain entries?
    Yes       No         Cancel
    When I choose yes, the input help suddenly prompt me to "Choose customizing project"  which i believe is from SPRO.
    How do I fix this problem so that when I press f4, the help will shows all position within the system.
    Thanks

    not answered, but found another work around

  • Infotype Creation - FM   HR_INFOTYPE_OPERATION

    How do everyone,
    I am using the FM  HR_INFOTYPE_OPERATION to create a recurring payment infotype.
    Everything is working fine. However, when the infotype is created it is created against the
    master cost centre. This is ok for some people but not all.
    If you create the infotype through PA30 you have the option to 'Maintain Cost Assignment'
    which displays a pop up box and allows the user to enter a different cost centre.
    Does anybody know how this can be replicated if possible using HR_INFOTYPE_OPERATION
    or is there another FM to use???
    Any help much appreciated.
    Andy

    try to record a batch input session and create the infotype with batch input instead of HR_INFOTYPE_OPERATION
    otherwise you could maintain the tables for cost distribution,
    view ASSOB_HR (tables ASSOB, ASSHR and PDSNR)

  • Regarding Infotype creation

    Hi All,
    I have created a an Infotype.I have entered two entries in it.
    But when i am going to PA30 to view this data system is giving a message that No Data stored for this paricular selection period.But i can see the data when i Execute PM01.
    So please suggest me on this what to to do.
    Thanks.
    Regards
    Ram

    Hi All,
    Thanks for our reply.
    If i am giving the date selection period it is working.But if i am giving an employee number and and my custom  infotype number and by clicking on the display i could not get data.so please suggest me on this.
    Thanks.
    Regards
    Ram

  • Infotype Creation - Writing logic in MPP program.

    Hello Guru's,
                         I dont know much about Module pool programming. I created a infotype with subtypes. And now I have to check various conditions and Validations ( Field level and Screen level). And list screen is also there.
    i.  Age, Service calculation.
    ii. Getting some wage types from infotype 0008 and adding it.
    iii. Field level validations like checking the entered amount r date in the screen, just after entering the value in the screen field.
    like different things. Please tell me in detail, incense which logic we have to write and where we have to write ( which program (MP999100, MP999110,20, 30) screen and which event like PBO, PAI) in detail please.
    Thanks in advance.

    To handle all the validations:
    In the PAI event.
    Chain.
    create a module for your validations and handle all ur validations in that module.
    endchain.
    Regards,
    Kiran

  • Custom infotype creation

    Hi,
    I need to create an infotype with custom fields. the layout is such that there are field names with checkboxes(around 10), date fields and text fields.
    ex:
    Asset information
                                                            quantity                 date of issue    quantity         date of return
    PCs (checkbox)                              (num field)             (date field)          (num field)     (date field)
    peripherals (checkbox)                  (num field)             (date field)           (num field)     (date field)
    car (checkbox)                               (num field)             (date field)          (num field)     (date field)
    furniture (checkbox)                      (num field)              (date field)          (num field)     (date field)
    datacard (checkbox)                     (num field)              (date field)          (num field)     (date field)
    Now, in the PS structure, what are the fields to be created based on the info above.
    Thanks,
    Munna.

    First create structure P. In case of using checkbox create a field with domain X.
    Create infotype with transaction PM01.
    Modify dynpro fields for selecting a checkbox or other visualization like radiobuttons

  • Custom Infotype Creation in ORG Management

    Vijay,
    Can you send me the steps so I can assign the points.
    Thanks,
    Parina

    Here are the steps that I followed:
    Enter the transaction code PPCI
    Enter a four digit infotype number (9nnn) and an infotype name.
    Select Field Infotype
    Choose Infotype Create.
    Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
    Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
    Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
    Press the Maintain button.
    From the list of Infotypes locate the custom infotype created and select the entry for that.
    Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
    The screen for Change View Time Constraint would appear.
    In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
    Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
    Create a new entry here for your infotype and save it.
    Come back to the Transaction PPCI and you are all set.
    This is all I did and it worked.
    Thanks,
    Vijay

Maybe you are looking for