Inhouse repair replicating error

when i saved inhouse repair, its saving with out error. but when i reopened it, its getting the following error
"An error has occured in the system D00CLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Partner with the partner role AP cannot be converted (Notification E C( 010)"
what is partner ap role
how to deal with this.

Hello
Contact Person partner function mapping issue. Check the config for middleware partner transfer . Spro>CRM>Baisc Funct->Partner Process>Data Transfer>Distribution of Partner Functions from CRM into SAP ECC Check the mapping for contact person.
Good luck,
Regards,Sai

Similar Messages

Inhouse repair from CRM replications error

when i saved inhouse repair in CRM system, its saving with out error. but when i reopened it, its getting the following error and its not getting replicated to ECC system
"An error has occured in the system D00CLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Partner with the partner role AP cannot be converted (Notification E C( 010)"
what is partner ap role
how to deal with this.
Thanks,
Proiya

Hi,
use t-code XD03 in ECC system, enter the corresponding customer code.
And click tab Contact persons thereafter.
On the tab Contact persons, check whether that contact person is available or not.
cheers,

The System shows an Error while creating an Inhouse Repair Order

Hi Experts,
I am facing a problem related to An Inhouse repair Order. when i create an order the system shows me two errors
1. An error occurred in system during account assignment
2. An error has occured in the system while copying the document
What could be the possible problem with the order....
any help will be highly appreciated.....
Thanks in Advance.....

Hi vickee.sehgal ,
Can u please provide inhouse repair configuration settings in crm 7.0. I have requirement on this,i am not able to find relevant best practices.
Thanks & Regards
kishore kumar

Inhouse repair Integration

Hi
I;m trying to use CRM Service with ERP without Controlling, I set the option No Controlling inteh Controlling Scenario config, but i don't found any documentation about limititations or not.
I can do the Return and delivery equipment process in ERP but i have problem in teh rest of the process of Material reservation or in Service confirmation when i try to bill Services or material with a debit request doc in ero.
I;m using CRM 7.0 and ECC 6.0
Any info, recomemdation, experience,
Best Regards

I found that there is definition in action profile:
Repair Request(Action Profile): Processing Details
ordered_pro = SRV_diagnosis.
how can we know that product is srv_diagnosis. What settings has to be made on product master to make it srv_diagnosis.
2nd question) i have removed that condition and the previous error message is gone and getting action performed immediatly but am not able to see item with item category DGNS in my inhouse repair order.
Thanks,
Priya

Nokia Suite Needs to be repaired continuous error

Dear All,
The Nokia Suite still not working since ver.3.89 update and giving the error "Nokia Suite needs to be repaired" . Since that update and till this moment with all trials of uninstall & reinstall & New updates & New beta versions.............etc are not working.
I'm using windows XP(SP3)
The Error message is "Nokia Suite Needs to be repaired" , if you choose repair it's an endless cycle.
Can Anyone help with that.

Hi guys i have an idea with my own experiance. (1) When nokia suite install error occur then i import 2 certificate .cer files (google for it) and nokia suite installed very easy. (2) after 1-2 months nokia suite corrupt because i restore previous restore point, then i remove and reinstall nokia suite now it show install error code 1601. Then
http://support.microsoft.com/kb/315346
i try method 1 in above site then nokia suite installed normally but (3) now when i open nokia suite it show "needs to be repair" endless error
but don't worry please try this-
install "total uninstall 5" and remove nokia suite, nokia connectivity cable drive and pc connectivity solution with this software, but remember that don't remove above 3 with add or remove program only remove above 3 with total uninstall 5, because this software remove every nokia suite related files in whole pc system. Now restart pc and reinstall nokia suite and see magic. Now nokia suite working fine. Now you can empty recycle bin.
Thanks

Repair Permissions Error (Close to Runs too long, No Progress Bar)

I have gotten this Repair Permissions error at least 10 times:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
One Internal Hard Drive, Erase, Install from scratch using Retail 10.5 DVD.
Quad 266.
It is similar to Repair Permissions takes forever with no progress bar, I get the Barber Pole for about 10 minutes and then it finishes with the above error. It seems like it is hanging trying to deal with the problem file and can't repair it.

I ran REPAIR PERMISSIONS again after installing Acrobat updaters.
At first I quit because it appeared to be hung.
I re ran it and came back later to this:
Repairing permissions for “105_HD”
Stopped by user
Permissions repair complete
Repairing permissions for “105_HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete

System is stuck on "repairing disk errors" loop

I have a Dell Inspiron M531R - 5535 windows 8 (or perhaps 8.1) that's a year old. It's been working fine until today. Last night I think i might have over heated but doubt it seeing as it didn't shut itself down like it usually does if it over heats (but it still might have idk).
I went to start it up today and it was stuck on the Dell loading screen for about 15 minutes. I restarted it using the power button and it took me to a "repairing disk errors" loading page. I waited seeing as it said it could take over an hour but after 3 hours I tried it all over again and waited ANOTHER 5 hours and it's still stuck on that loading screen. Twice it's gotten my hopes up by taking me to my sign in page but it won't let me type or click anything and just freezes there.
So, I tried to reset my pc back to factory mode in hopes that it would fix the problem. I've pressed every function button with the power and the only ones that work are the f5 and f8 button. They booth allow me to either pick setup or boot options. Neither one gives me the option to put my laptop in safe mode nor restore/repair. I even took the battery out and put it back in and it still does nothing.
To top it all off, I don't have a windows 8 recovery cd and have no idea how to get one (I don't know anyone else who has a windows 8 or 8.1)
Is there ANYTHING that can be done or should I take my laptop in to get repaired? Or the worst news of all, is my 500 dollar laptop done for good?

Repairing disk errors is a process that will take a long time. It will appear to be stuck but this is normal most of the time depending on what it is repairing. Give it more time until fixed or you get another message.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Repair Disk Error during Mountain Lion Install 2010 Macbook Pro

Hello All,
Last night like many of you I downloaded Mountain Lion to update to the newest Apple OS. During the install procress I was told my Harddrive was corrupted and needed to be repaired. After running the Verify Disk utility the following errors came up
Checking Catalog file,
Incorrect number of thread records
Incorrect number of thread records
Checking catalog hierarcchy.
Invalid volume file count
Checking volume information.
The volume Macintosh HD was found corrupt and needs to be repaired.
Then I used the repair utlity on the same screen.
The message was that it had attempted to repair it three times and it could not do so.
During the repair the error message incorrect number of thread records appeared twice.
Afterwards it no longer showed that harddrive as mounted and I cannot boot back into it. When booting it gives me the option of the Install Boot, the Recovery Boot, or my Windows Partition boot.
Two Questions
Is there a way to boot back into the OS to recover my files, I have most backed up but would like to get a few more on my external HD?
My other question is how can I sucessfully repair the disk so that I can do the above question and also install mountain lion.
Thank you,
Andrew

If you have no current backups, DO NOT TRY TO BOOT.
If you want to preserve the data on the internal drive(s), you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

How to repair the error of MARDH

I have find an error of MARDH,e.g:stock of material 00B0102 in factory 3000,storage 3001 ,2010/4, is 1220 pc,and goods receipt in 2010/05 is 100 pc,but stock from MARDH in 2010/05 is 120 pc.how can i repair the error ,and is it an program error ?
best regards ,thanks!

>
Umakanth R wrote:
> Hi,
>
> You can edit sap table entries via transaction SE16N for table MARDH.
>
> Umakanth R
this way you can create inconsistencies as well.
A correction of a value, will not solve the error, you might get the same problem again and you still do not know why.
You have to investigate the root cause. And if you havent done anything wrong, then chekc OSS for bug fixes, and if there is none, then contact SAP.

Weird repairing disk error loop

My computer seems to be to be stuck in the "repairing disk error" loop though, unlike in most people cases, mine does not end up to the blue screen. Ive left it on hoping it would give me the option but its been 2 days already and its just repeats
the usual statements everyone gets before the blue screen occurs. Could someone please help find a resolution to this. Much appreciated.

They'll help you over here.
Windows forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

HP Envy x360 Stuck in "Repairing Disk Errors" Loop

So yesterday while I was using my computer as usual (on chrome using facebook to chat) the computer started freezing up on me, the usual fix for this is to ctrl- alt- delete and restart so i went to do that but the task manager was still having problems/ not wanting to boot up. Upon this happening I saw a "windows not responding, do you wish to close?" message in the lower left so I hit yes hoping windows would boot right back up and then I would as usualy be able to continue with work. The computer froze entirely not allowing me to hit any button. So at that point I manually powered down my PC, when the PC powered back up it came up with the "Repairing Disk errors. This might take over an hour to complete" error with the spinning dots.... Now I thought that maybe the shutdown had caused it to want to run a scan, so I left it alone for 3-4 hours to complete it's disk repairs. Upon returning to the computer I saw the same screen. So now looking for other repair options, I restarted it in BIOS mode as directed on another thread/ reset to defaults/ and then saved and exited. Once I did that I got the error screen that there was no installed operating system or hard drive which only gave me the system diagnostics screen you can press f2 to get to. I did that and then found upon running memory/ hard drive scans that my memory passed fine but it was not able to run hard drive scans either a quick or extensive test because it said "not installed". I then thought that maybe i jostled the lap top during the course of use that day and that I had to just open up the computer and reseat the hard drive. So I opened the laptop up, removed hard drive and replaced it as directed from the HP video that I found. The results remain the same. My main question is there anything that I am missing? I am hard pressed to believe that this laptop's hard drive which was not full/ brand new 6 months ago/ had anti virus software that ran regular scans and never found anything already went bad. My sony desktop ran for 7 years before problems, my dell notebook ran for 6 years before crapping out and I am just appalled that this brand new 900 dollar machine only has worked for 6 months. Do you have another fix I am missing that is common to this model (the envy 360) to get it out of this kind of loop?

Repairing disk errors is a process that will take a long time. It will appear to be stuck but this is normal most of the time depending on what it is repairing. Give it more time until fixed or you get another message.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

In house repair order error

Hi,
we have an issue while replication of In house repair order from CRM to ECC.
Smw01 showing in house repair order errors like below
Enter at least one plant
No instance of object type BUS2093 has been created. External reference:
No stock posting possible for this material
Company code does not exist
No instance of object type BUS2093 has been created. External reference:
There is no standard field in in house repair order level at item or header level
I have maintained below settings in crm for plant
spro>crm>Transactions->settings for service transactions>Integration->Logistics integration-->Assaign Plant and storage location to service organization
Still i am getting above errors.
Please suggest me any solutions for above issues
Regards
kishore kumar

Hi,
You need to enter Plant as a partner function in the In House Repair Order to rectify this error.
Maintain partner function 00000035 and assign a Plant BP number which is mapped to ECC plant.
Regards,
PP

Transaction not visible -Inhouse repair..

Hi..
I have created a copy of inhouse repair txn type and cretaed Ztxn type.
But the same is not visible when im trying to create from easy access menu...?
Regards,
sanjana

Hi Sanjana,
IMG Path : SPRO -> CRM -> Transactions -> Basic Settings
--> Define Trasaction Types
Click on position button enter your transaction type
Check in the fouth column(Inactive) keep it blank
and also choose the leading trasaction category as BUS 2000120 complaints.
Then you check with the transaction code CRMD_ORDER
Under complaints you can see your transaction Description.
I hope it solves your problem.
Reward points if it helps.
Regards,
Madhu

Repairing Disc Errors - HP Envy23

When I switch my computer on there is a message 'Preparing Automatic Repair' and then it changes to 'Diagnosing Your PC' and then 'Repairing Disk Errors, This may take over an hour to Complete' - I have had the computer on for nearly 3 hours and the above messages just keep reappearing with no repairs appearing to be done. What Can I do? Any suggestions?
Thanks
This question was solved.
View Solution.

Thanks for that Dunidar!!

Repairing an error 9972 with Diskwarrior

I am running 10.4.11 on my imac G5. I am trying to repair an error 9972. I ran Diskwarrior (DW) 3.0.3. It took about 2 hours and the software made its repairs and it was replaced with the DW repaired. On restart I get a globe and then a flashing folder – it then went into a normal grey apple satrtup screen with a spinning gear. It's been over 7 hours of spinning. Is this right? Should I have used DW 4?
Cheers

Well after many many hours I got it to work. It took a combination of inserting disk utilities, disk warrior 4.0, restarting, reseting smu,pr, etc. the disks were not coming out without a firmware command on and on finally, the Tiger disk let me see that the disk was fine and it let me check the disk, DW 4.0 cleaned up 4 files that could not be fixed by DW 3.0.3 and finally after many more fits and starts tiger let me archive and reinstall. Almost all the setting perfectly the same. All the disk utilities say the drive is in great shape.
Tomorrow, I'm buying a time capsule and next week if it is going well – Leopard for back-ups.
Thanks for reading

Inhouse repair replicating error

Similar Messages

Maybe you are looking for