"Initial campaign ID given error" in ELM

Hi,
I have created a mapping format and created an External list, when i click on "start" to upload data...
it gives error at "Map Data" saying "Initial campaign ID given".
What is the solution for to overcome this error?
T&R
Ajay

Hi Ajay,
I have the same error. Do you know the solution already?
Thank you in advance!
Best regards, Jasmin

Similar Messages

After windows update in sharepoint 2010 farm , administraion service stopped and given error when start

Hi
i have a sharepoint 2010 farm
and it has total 6 servers, and in all servers i did the latest windows update
and after update i found the sharepoint 2010 administraion service was stopped and when i start its given error message
Log Name:      System
Source:        Service Control Manager
Date:          7/12/2014 3:01:15 PM
Event ID:      7000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SPFAPP01.xyz.gov.local
Description:
The SharePoint 2010 Administration service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
   <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-12T12:01:15.109313700Z" />
    <EventRecordID>81462</EventRecordID>
    <Correlation />
    <Execution ProcessID="576" ThreadID="3372" />
    <Channel>System</Channel>
    <Computer>SPFAPP01.xyz.gov.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">SharePoint 2010 Administration</Data>
    <Data Name="param2">%%1053</Data>
</EventData>
</Event>
adil

Are you able to run the Config Wizard? Are there any helpful messages in the Application Event Log or in Applications and Services Logs -> Microsoft -> SharePoint Products -> Shared -> Operational?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Using UNUSABLE on Unique Index gives "initially in unusable state" error

I am doing the following:
1. Truncate table
2 Alter PK Index Disable
2. Alter Unique Index Unusable
3. Insert /*+ APPEND NOLOGGING*/ into my table
My problem is, I get an "ORA-26026: unique index ... initially in unusable state" error when I try to do the Insert. If I make the Unique index non-unique it isn't a problem. If I drop the index and recreate it its not a problem - so uniqueness doesn't appear to be the issue. Can you not use UNUSABLE with a Unique index, I couldn't find any reference to this in the 10g docs.
I am using 10.1.0.4.
Thanks
Richard

26026, 0000, "unique index %s.%s initially in unusable state"
//* Cause: A unique index is in IU state (a unique index cannot have
//* index maintenance skipped via SKIP_UNUSABLE_INDEXES).
//* Action: Either rebuild the index or index partition, or use
//* SKIP_INDEX_MAINTENANCE if the client is SQL*Loader.

I have installed Photoshop element 12 trail version in my system and i worked also for some days but it given error that "cannot load default brushes because scratch disk is full " but scratch is 158GB free

Hi,
I have installed Photoshop element 12 trail version in my system and i worked also for some days but it given error that "cannot load default brushes because scratch disk is full " but scratch is 158GB free why whats the problem am not getting.

That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.

Mess and fail given errors in 10g?

IF NVL(:BLOCKM.ITEM_QTY,0)>NVL(:STK_QTY,0)
THEN
MESS('Issue Qty Can Not Be Stock Qty....');
FAIL;
END IF;
above code in 10g given error,,
must be declare?
please help.
thanks
yash

Hi Yash,
Your code should be like this
IF NVL(:BLOCKM.ITEM_QTY,0)>NVL(:STK_QTY,0)
THEN
MESSAGE('Issue Qty Can Not Be Stock Qty....');
RAISE Form_Trigger_Failure;
END IF;If you want to create custom build functions, then create it (MESS) and inside call MESSAGE built-in , which is absolutely unnecessary in this case with double work.
Most welcome :-) yash forum intend to share ideas
Edited by: Lokanath Giri on २७ दिसंबर, २०११ ११:३९ पूर्वाह्न

How to restrict the Save of a Campaign if any error messages are raised/there?

Hi All,
How to restrice the save of the Campaign if any error messages are called/raised.
Now, I am using conditions in the Save method but it is not working now.
find the Attachment for the error message.
I am assuming this error is calling from some where not from my code.
Please suggest me any Badi or other way to restrict the save of the Campaign.
Thanks in Advance....
Regards
vam's

Hi I am actually trying to prevent the saving by using the BADI and putting
ev_reject_save = abap_true.
Nevertheless the campaign is saved with errors...any idea how to prevent this ?

Error in ELM t.code CRMD_MKTLIST

Hi Experts,
While trying to create an External List in transaction CRMD_MKTLIST, its showing me an error as follows:
- Step "Create Marketing Prospects" is missing in the step table
Please help me resolve this.
The error details are as follows:
1. Step "Create Marketing Prospects" is missing in the step table
Message no. CRM_MKTLIST_PACKAGE050
2. Diagnosis
The step "Create Marketing Prospects" with the technical ID H was not found in the given step table.
3. System Response
For a correct processing of the steps and their attributes the mentioned step must be given.
4. Procedure
Put the mentioned step into the step table of the API and call the MAINTAIN-API again.

Thanks Susanta!
During the testing, I have noticed that it's probably an authorization issue. Some users can successfully use ELM, others can't. I'll try to take a more in-depth look at it as soon as possible.
Regards,
Caroline
Update:
It was indeed an authorization issue. It is resolved by creating an additional PFCG-role which includes the objects CRM_LIST_H, CRM_MAP_FM, S_DATASET and UIU_COMP.
Edited by: Caroline Verwaeren on Aug 2, 2010 5:37 PM

Error in ELM - Maintain BP - CRM_MKTLIST_STAGING013

HI all,
when i try to upload BP with ELM, SYSTEMS (CRM 7.0) show me the following error message:
0 business partners maintained
message errore - CRM_MKTLIST_STAGING013
I have this problem after that i have implemented CRM_MKTLIST_BADI badi.
The problem remains also if i delete all my abap code.
If i deactive the bai, no prblem occurs.
someone have any suggestions?
Thanks in advance.
Regards
AGL

Hello AGL,
Please check the workflow customising in SPRO , the Implement workflow Customising under ELM mentions the details of the
same.
If you check the documentation, it mentions " First of all, you must perform the Maintain Standard Settings for SAP Business Workflow. "
This can be done using the IMG path :
CRM -> Basic Functions
-> SAP Business Workflow
-> Maintain Standard Settings for SAP Business Workflow.
or by clicking in the link provided for ELM workflow documentation. Can you please complete these settings as they are essential for ELM to work.
If you have implemented the BADI CRM_MKTLIST_BADI, then adjust your BADI according to your requirement, also review note 708557
thanks
Willie
Edited by: Willie Musa on Jul 22, 2011 9:44 AM

Initial category is invalid error while running Locaton Hueristic

Folks
While running Locaton Hueristic, system is throwing and error '"Initial category is invalid". I had created a copy of 9ASNP02 PA, PB and DV, added a new KF and assigned a new categry group to this KF under all the aggregates. It was running fine but lately I am seeing this error. ANy ideas on what could have gone wrong and how to resolve this ?
Initial category is invalid
Message no. /SAPAPO/OM_ERROR2820
Diagnosis
An application program called an LCA routine. This led to an error.
Procedure
Contact your system administration.
Procedure for System Administration
Contact SAP Service. Specify the application component in which this message occurred.
You must also enter:
The message number
Return code 19020 (om_atp_initial_cat_not_valid)
Error code ATP

Run below consistency check :
/SAPAPO/TS_LCM_CONS_CHECK and
/SAPAPO/TS_PSTRU_CONS_CHECK
/SAPAPO/TS_LCM_REORG
/SAPAPO/TS_LCM_PLOB_DELTA_SYNC
Also check oss note :Note 727698 - New return code from the liveCache
Manish

Shared Variable Initial value not licenced error with cRIO

Hello Everyone,
I've a project that will be deploed on cRIO. This project was created on a different machine and didn't have any error regarding the shared variables. when I transfered the project to the computer connected to the cRIO, I have this error with all shared variable. The error message says that:
1. Initial Values: Not Licenced or can't be edited outside of LabVIEW.
2. Logging: Not Licenced or can't be edited outside of LabVIEW.
attached are two images for the error i have.
Can I have help with this issue?
Thanks in advance
Attachments:
1.png ‏134 KB
2.png ‏142 KB

Good day,
Sounds like you are using the DSC module features on your code and you forgot to activate the runtime system on that machine. If you have access to the NI License Manager, please check the status of the license.
We need an active license for the second message but, for the first one you can try to program your own initial values for all of your network-published shared variables by initializing whenever the PC is started. During the initialization portion of your code, you can just write a constant value to the shared variables so the values are the same initial values every time it is run.
Regards,
Alejandro | Academic Program Engineer | National Instruments

Rfc Function Working in sap But when test in Saop UI Its given error

Hi Gurus,
I Got One problem in wsdl File. I developed a RFC For Create Reservation. So I passed Material Details in Table For Create Reservation . Sap Side Its Working . But When I test Wsdl File in Saop File I am Getting Error 'Fault String'. I given The Values Parfectly . But What is the Prolem I don't know. Plz Help Me. see the Code with Values.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
   <soapenv:Header/>
   <soapenv:Body>
      <urn:RfcCreateReservation>
         <CreatedRsnum>
            <!Zero or more repetitions:>
            <item>
               <Reservationno></Reservationno>
               <Created></Created>
            </item>
         </CreatedRsnum>
         <IssueLocation>P110</IssueLocation>
         <IssuePlant>P100</IssuePlant>
         <MaterialDetails>
            <!Zero or more repetitions:>
            <item>
               <Materialno>191</Materialno>
               <Description>Venu</Description>
               <Quantity>3.0</Quantity>
               <Units>EA</Units>
            </item>
         </MaterialDetails>
         <ReceiveLocation>W210</ReceiveLocation>
         <ReceivePlant>W210</ReceivePlant>
         <Recipient>Gopal</Recipient>
         <ReservationNum>200000</ReservationNum>
      </urn:RfcCreateReservation>
   </soapenv:Body>
</soapenv:Envelope>

The error message is Posting_illegal_statement and yes I did search OSS (I always do that first) but I could not find anything relevant to my error.
Regards,
Davis

Initial Print jobs 'communication error with device'. Pause and restart job

So, I have an odd variant of the Leopard print problem; on 3 separate systems.
When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
This seems to be some timeout issue or such. I tried IP printing, but no difference.
Resetting the print system also did not help.
It's not catastrophic but sooo annoying. Any input appreciated!
Thx,
Dan

Hello SunnygirlQ. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Extreme and AirPort Express
I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

Report not generated because of the given error(Logon Denied)

hi,
While generating the report following error is shown.
ORA-01017: invalid username/password; logon denied
All the roles and privileges are properly mapped..
kindly help.

Sorry for the delay Chris, had a time finding somewhere to put the file…
It's here:
216.8.172.241/TempSaveError.zip
…but only until my dynamic IP changes.
I don't know it will give you much, I tried closing the file and then opening it again and everything had gone back to normal. Then I couldn't reproduce the error again. I do think it had something to do with that mask.
The layer is a overlay layer filled with neutral grey that has had noise added to it at 70% opacity with a mask, and the mask was feathered at 1.1 px.

Correcting initial frame size setting error

Hi there,
A very noobie mistake on my part I'm afraid. When working with some 1280x720 footage from a DSLR I mistakenly put the initial project frame size in as 1920x1080. Hence when I export the completed video it does not fill the screen. I've looked into altering the Sequence Settings but the program won't let me change it now. Any tips out there for getting it to export at the right size. Can I copy and paste the whole thing into a new project with the correct specs or might it be a case of altering the size of the image in the Export Settings panel? This video has taken a long, long time. I can't really go back and start from scratch.
Thanks a lot people,
Jim, U.K.

Step 1: Create a new sequence in your project by dragging and dropping one of your media clips on the "New Item" button in the lower right of the Project Panel.
Step 2: Delete the clip from the new sequence leaving you with a nice empty sequence.
Step 3: Go to the orginal sequence and lasso everything on the entire timeline, and copy it.
Step 4: Paste it all into the new sequence
I believe that will give you what you are after, if you didn't scale any of the images up to 1920X1080. If you did, you will have to scale them back down to 100%.

Online backup given error while using brtools

Hello mates,
I am working on EP60,IBM-AIX, Oracle platform and tried to take online backup using brtools(triggering first time) but giving the below error:
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: bdzqsemh.and 2009-01-08 16.35.35
BR0484I BRBACKUP log file: /oracle/EPP/sapbackup/bdzqsemh.and
BR0477I Oracle pfile /oracle/EPP/102_64/dbs/initEPP.ora created from spfile /oracle/EPP/102_64/dbs/spfileEPP.ora
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.39
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108163535', 'and', 'EPP', ' ', '9999'
, ' ', 'bdzqsemh', '#    0     0     0         0                0        0                0 ALL          online
disk             ---k-c 7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.40
BR0319I Control file copy created: /oracle/EPP/sapbackup/cntrlEPP.dbf 7397376
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.41
BR0301W SQL error -1031 at location BrDbfInfoGet-32, SQL statement:
'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20071205000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.41
BR0301W SQL error -1031 at location BrDbfInfoGet-33, SQL statement:
'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20071205000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.41
BR0301E SQL error -1031 at location BrComprDurGet-1, SQL statement:
'OPEN curs_6 CURSOR FOR'
'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DCS'
OR FUNCT = 'DCM') ORDER BY FUNCT'
ORA-01031: insufficient privileges
BR0314E Collection of information on database files failed
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.41
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090108163535', 'and', 'EPP', ' ', '9999'
, ' ', 'bdzqsemh', '7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0056I End of database backup: bdzqsemh.and 2009-01-08 16.35.41
BR0280I BRBACKUP time stamp: 2009-01-08 16.35.41
BR0054I BRBACKUP terminated with errors
Please suggest to correcdt it.
Regards,
AMS Team

I checked the initSID.sap file and changed the backuptype to online and from tape to disk but still same error:
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.44
BR0657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initEPP.sap]
2 - Backup device type (device) ...... [tape]
3 ~ Tape volumes for backup (volume) . []
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [/]
6 - Backup type (type) ............... [offline]
7 - Disk backup for backup (backup) .. [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
2
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.47
BR0663I Your choice: '2'
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.47
BR0681I Enter string value for "device" (tape|tape_auto|tape_box|pipe|pipe_auto|pipe_box|disk|stage|util_file|util_file_on
line|rman_util|rman_disk|rman_stage) [tape]:
disk
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.49
BR0683I New value for "device": 'disk'
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.49
BR0657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initEPP.sap]
2 - Backup device type (device) ...... [disk]
3 # Tape volumes for backup (volume) . []
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [/]
6 - Backup type (type) ............... [offline]
7 # Disk backup for backup (backup) .. [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
6
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.52
BR0663I Your choice: '6'
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.52
BR0681I Enter string value for "type" (offline|offline_force|offline_standby|offline_split|offline_mirror|offline_stop|onl
ine|online_cons|online_split|online_mirror|online_standby|offstby_split|offstby_mirror) [offline]:
online
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.55
BR0683I New value for "type": 'online'
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.55
BR0657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initEPP.sap]
2 - Backup device type (device) ...... [disk]
3 # Tape volumes for backup (volume) . []
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [/]
6 - Backup type (type) ............... [online]
7 # Disk backup for backup (backup) .. [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.57
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.57
BR0657I Input menu 16 - please check/enter input values
Additional BRBACKUP options for backup and database copy
1 - Confirmation mode (confirm) ....... [yes]
2 - Query mode (query) ................ [no]
3 - Compression mode (compress) ....... [no]
4 - Verification mode (verify) ........ [no]
5 - Fill-up previous backups (fillup) . [no]
6 - Parallel execution (execute) ...... [0]
7 - Additional output (output) ........ [no]
8 - Message language (language) ....... [E]
9 - BRBACKUP command line (command) ... [-p initEPP.sap -d disk -t online -m all -k no -e 0 -l E]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
3
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.59
BR0663I Your choice: '3'
BR0280I BRTOOLS time stamp: 2009-01-09 15.21.59
BR0681I Enter string value for "compress" (no|yes|hardware) [no]:
yes
BR0280I BRTOOLS time stamp: 2009-01-09 15.22.01
BR0683I New value for "compress": 'yes'
BR0280I BRTOOLS time stamp: 2009-01-09 15.22.01
BR0657I Input menu 16 - please check/enter input values
Additional BRBACKUP options for backup and database copy
1 - Confirmation mode (confirm) ....... [yes]
2 - Query mode (query) ................ [no]
3 - Compression mode (compress) ....... [yes]
4 - Verification mode (verify) ........ [no]
5 - Fill-up previous backups (fillup) . [no]
6 - Parallel execution (execute) ...... [0]
7 - Additional output (output) ........ [no]
8 - Message language (language) ....... [E]
9 - BRBACKUP command line (command) ... [-p initEPP.sap -d disk -t online -m all -k yes -e 0 -l E]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2009-01-09 15.22.40
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRBACKUP will be started with options '-p initEPP.sap -d disk -t online -m all -k yes -e 0 -l E'
BR0280I BRTOOLS time stamp: 2009-01-09 15.22.40
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-01-09 15.23.55
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: bdzqwvxz.and 2009-01-09 15.23.55
BR0484I BRBACKUP log file: /oracle/EPP/sapbackup/bdzqwvxz.and
BR0477I Oracle pfile /oracle/EPP/102_64/dbs/initEPP.ora created from spfile /oracle/EPP/102_64/dbs/spfileEPP.ora
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090109152355', 'and', 'EPP', ' ', '9999'
, ' ', 'bdzqwvxz', '#    0     0     0         0                0        0                0 ALL          online
disk             ---k-c 7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0319I Control file copy created: /oracle/EPP/sapbackup/cntrlEPP.dbf 7397376
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0301W SQL error -1031 at location BrDbfInfoGet-32, SQL statement:
'DELETE FROM SAP_SDBAH WHERE BEG > '10000000000000' AND BEG < '20071206000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0301W SQL error -1031 at location BrDbfInfoGet-33, SQL statement:
'DELETE FROM SAP_SDBAD WHERE BEG > '10000000000000' AND BEG < '20071206000000''
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0301E SQL error -1031 at location BrComprDurGet-1, SQL statement:
'OPEN curs_6 CURSOR FOR'
'SELECT FUNCT, POS, LINE FROM SAP_SDBAD WHERE BEG = '00000000000001' AND (FUNCT = 'CMP' OR FUNCT = 'CMP' OR FUNCT = 'DCS'
OR FUNCT = 'DCM') ORDER BY FUNCT'
ORA-01031: insufficient privileges
BR0314E Collection of information on database files failed
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0301W SQL error -1031 at location BrbDbLogOpen-5, SQL statement:
'INSERT INTO SAP_SDBAH (BEG, FUNCT, SYSID, OBJ, RC, ENDE, ACTID, LINE) VALUES ('20090109152355', 'and', 'EPP', ' ', '9999'
, ' ', 'bdzqwvxz', '7.00 (24)')'
ORA-01031: insufficient privileges
BR0324W Insertion of database log header failed
BR0056I End of database backup: bdzqwvxz.and 2009-01-09 15.23.55
BR0280I BRBACKUP time stamp: 2009-01-09 15.23.55
BR0054I BRBACKUP terminated with errors
BR0292I Execution of BRBACKUP finished with return code 3
BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-01-09 15.23.55
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:

"Initial campaign ID given error" in ELM

Similar Messages

Maybe you are looking for