Initialization issues

hi,
   i am using data source figl_6. i have initialized the delta process with few selection conditions and have been running deltas for a while. i have to change the selection conditions and start the initialization again. so i have cleared the contents of data target and initialized with out data trasfer again with the new selection conditions. when i run the deltas now it says no new deltas available. but when checked for the period i am extracting there is data for that selection conditions. i dont know where i am going wroung. can any body help me with this.
thanx,
Ravi.

hi,
   thanx for the quick response. can u please guide me for the following issue.
    we have moved into the production box last month and we have quite time on saturday nite for the initialization. so we have scheduled all the initializations with the following selection conditions for the fiscal yyear/period 006.2006 with other selections. we find that the other selections are wroung and we r suppose to scedule the initializations again. so rather then waiting till saturday nite i thought if i can change the selections to my requirement and with the same fiscal year/period i run the initialization with out data transfer. but the deltas from there on are not working.
can u please tell me how to get the initialization and deltas running from the mentioned period.
Thanx,
ravi.

Similar Messages

  • Service Bus with WCF in IIS 8 with Application Initialization Issue

    I’m running service bus 1.1 on premise locally and have it hooked into a wcf service using netMessagingBinding. 
    I installed Application Initialization and set Start Mode to AlwaysRunning for the application pool, and set Preload Enabled to true for the site. 
    I also have the appropriate <applicationInitialization> section in the web config where I added the service to an initializationPage.
    The message gets delivered if I hit the endpoint in my browser, and even if I do an IIS reset, it still gets delivered, however I had to hit the endpoint first manually. 
    If I do a clean (or edit any of the wcf code files) and build, it won’t get delivered until I hit the endpoint. 
    I get similar behavior when I set a break point in the service and attach to the w3wp.exe process. 
    If I do a clean and build and set a break point in the service code, it has the open red circle that says breakpoint will not be hit, no symbols have been loaded for this document. 
    When I hit the endpoint, the open red circle gets filled, and the endpoint can be hit. 
    I’m guessing these 2 go hand in hand with what I’m seeing with the service bus.
    Setting up Application Initialization fixes the issue if I restart IIS, it can continue to receive messages, however I first need to hit the endpoint.
     I just don’t know how it handles the scenario when it first gets deployed (like when I do a clean and build). 
    I thought the Application Initialization would of handled this but I’m probably missing something.

    Hi sir,
    Form your description, it seems that you use the op-premise service bus. I will move this thread to Azure Pack forum for more helps.
    Regards,
    Will 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Console initialization issues on VM manager 3.1.1

    Hi,
    I created a guest vm and tried to start it up, it reports the console initialization error.
    xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
    Log-dirty: no command yet.
    I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
    vcpu-set: watch node error.
    xen be: console-0: xen be: console-0: initialise() failed
    initialise() failed
    xs_read(/local/domain/1/log-throttling): read error
    qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
    medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
    xen be: console-0: xen be: console-0: initialise() failed
    initialise() failed
    xen be: console-0: xen be: console-0: initialise() failed
    initialise() failed
    cirrus vga map change while on lfb mode
    mapping vram to f0000000 - f0400000
    my vm.cfg file looks like this....
    vif = ['mac=xx:xx:xx:xx:xx:xc,bridge=xx.xxx.xxx.xx']
    OVM_simple_name = 'labrac1'
    guest_os_type = 'default'
    vncconsole = 0
    serial = 'pty'
    disk = ['file:/OVS/Repositories/0004fb000003000004005d4d126259fc/VirtualDisks/0004fb0000120000a368fa6d0a4db31d.img,hda,w']
    vncunused = '1'
    uuid = '0004fb00-0006-0000-b4ac-31211713aef3'
    on_reboot = 'restart'
    boot = 'c'
    name = '0004fb0000060000b4ac31211713aef3'
    vncpasswd = 'oracle'
    cpu_weight = 27500
    pae = 1
    OVM_os_type = 'Oracle Solaris 10'
    cpu_cap = 0
    maxvcpus = 1
    OVM_high_availability = False
    acpi = 0
    memory = 1536
    vnclisten = '127.0.0.1'
    vnc = '1'
    OVM_description = 'Lab RAC Node 1'
    on_poweroff = 'destroy'
    on_crash = 'restart'
    apic = 1
    maxmem = 1536
    usbdevice = 'tablet'
    device_model = '/usr/lib/xen/bin/qemu-dm'
    vif_other_config = []
    builder = 'hvm'
    vcpus = 1
    keymap = 'en-us'
    OVM_cpu_compat_group = ''
    OVM_domain_type = 'xen_hvm'
    I searched lot of blogs and websites through google around this error but no luck yet. Please help.
    THanks
    Srini

    Hi,
    I created a guest vm and tried to start it up, it reports the console initialization error.
    xs_read(/local/domain/0/device-model/1/xen_extended_power_mgmt): read error
    Log-dirty: no command yet.
    I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
    vcpu-set: watch node error.
    xen be: console-0: xen be: console-0: initialise() failed
    initialise() failed
    xs_read(/local/domain/1/log-throttling): read error
    qemu: ignoring not-understood drive `/local/domain/1/log-throttling'
    medium change watch on `/local/domain/1/log-throttling' - unknown device, ignored
    xen be: console-0: xen be: console-0: initialise() failed
    initialise() failed
    xen be: console-0: xen be: console-0: initialise() failed
    initialise() failed
    cirrus vga map change while on lfb mode
    mapping vram to f0000000 - f0400000
    my vm.cfg file looks like this....
    vif = ['mac=xx:xx:xx:xx:xx:xc,bridge=xx.xxx.xxx.xx']
    OVM_simple_name = 'labrac1'
    guest_os_type = 'default'
    vncconsole = 0
    serial = 'pty'
    disk = ['file:/OVS/Repositories/0004fb000003000004005d4d126259fc/VirtualDisks/0004fb0000120000a368fa6d0a4db31d.img,hda,w']
    vncunused = '1'
    uuid = '0004fb00-0006-0000-b4ac-31211713aef3'
    on_reboot = 'restart'
    boot = 'c'
    name = '0004fb0000060000b4ac31211713aef3'
    vncpasswd = 'oracle'
    cpu_weight = 27500
    pae = 1
    OVM_os_type = 'Oracle Solaris 10'
    cpu_cap = 0
    maxvcpus = 1
    OVM_high_availability = False
    acpi = 0
    memory = 1536
    vnclisten = '127.0.0.1'
    vnc = '1'
    OVM_description = 'Lab RAC Node 1'
    on_poweroff = 'destroy'
    on_crash = 'restart'
    apic = 1
    maxmem = 1536
    usbdevice = 'tablet'
    device_model = '/usr/lib/xen/bin/qemu-dm'
    vif_other_config = []
    builder = 'hvm'
    vcpus = 1
    keymap = 'en-us'
    OVM_cpu_compat_group = ''
    OVM_domain_type = 'xen_hvm'
    I searched lot of blogs and websites through google around this error but no luck yet. Please help.
    THanks
    Srini

  • FCoE initialization issues on 1020 CNA & Nexus 7k

    Hi,
    We recently started using FCoE SANs in our environment. Servers are IBM Server X with the Dual Port 1020 CNA installed. SAN implementation on a Cisco Nexus 7k with an F1-32 port module installed. FCoE is licensed on the module and a storage VDC has been created.
    Problem is the CNA never shows up on the Nexus switch when you query the flogi database and we turn on debug on the switch, we notice flogi login failures. We doubled checked the Qos policies on the switch, seems that for the Nexus 7k you only need the default-nq-7e-policy and -nq-7e-ndrop-fcoe policies.  Does anyone have any experience with using the Nexus 7k for FCoE deployments?

    Hi,
    It looks I might run into the same issue as you had. Did you manage to fix this issue?
    If so, could you please share the details?
    Regards, Jan-Willem

  • Initialization Issues -  MacBook from TC

    New MacBook (Aluminum) initialization screen gave me the option to initialize from a Time Machine image.
    The MacBook initialization located the TC telling me that it had two images - this was correct.
    Selected TC and the system hung with a rotating rainbow disc.
    Solution was to use Migration Assistant over ethernet from original system.
    Then, couldn't mount new system on TC until I filled in System Name in Sharing panel in System Preferences.

    Yes, you can restore your entire system to the exact state it was in at the time of any backup.
    See #14 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of the +Time Machine+ forum). So make sure your Install disc is available. As noted there, it will be much faster if you connect via Ethernet.
    And you can browse the backups from a different Mac. See #17 in the same place.

  • Payroll initialization issue

    Dear all
    i got a error when i am running payroll.
    error text is
    This is a live client
    No check performed against control record
    payroll cancelled
    Scenario is like this:
    simulation is working fine, no modification in control records, only usual release no such error in past.
    And this is a critical period as i have to run now.
    Thx

    Hi
    Did you done something in Schema?
    Check the program Hincalc0.
    Check where is the error text and what is a problem.
    Reply if any hints or problem .
    <b>Reminder : Points should be given on answers.</b>

  • Database Initialization Error

    Hi,
    I was trying to initialize my DB and I get this error "Upgrade Wizard did not complete successfully. Please examine the log file for details and restart the Siebel application to attempt the upgrade again. "
    Where to look for these log files ?
    What exactly to look for in these log files ?
    Because of no Error Code I am not able to find much detail on the net. If anybody has faced this issue please help me resolve the issue.
    Thanks :-)

    You should refer to the following posting on Oracle support that provide the troubleshooting steps in such case:
    *Troubleshooting Steps: Remote Database Initialization Issues [ID 735454.1]*_
    Basically intereting log files are located under Client_home\log
    Siebel.log
    Applythrd_xxxx_yyyy.log
    Syncthrd_xxxx_yyyy.log
    UpgWiz.log
    dmutl2.log
    Best Regards
    EvtLoglvl

  • Excel initialization error

    I have problems with excel sheet powerpivot data initialization issue. The error message:
      "Initialization of the data source failed. Check the database server or contact your database
    administrator. Make sure the external database is available, and then try the operation again. If you see this message again, create a new data source to connect to the database". 
       When the excel sheet is opened with Microsoft Excel manually, there is no issue; but, when
    the VB script coding with opening the excel sheet, some of excel sheets will have the error message. One of Excel sheets has issue, change Excel powerpivot menu manually configuration with OLAP Drill through: 1000000, changed to 1000, the error message goes
    away. 
       I edit global environment variable: VSTO_SUPPRESSDISPLAYALERTS  to 0, and
    then, some of excel sheets have error message next is "The embedded powerpivot data is corrupt. You have the following options", I chose "Attempt to recover the structure of the powerpivot data"; but the reports in pdf shows empty data.Try
    different things to pinpoint the error, which page, which database, too many data, columns in select statement.
      Need help to figure out this initialization issue.
    jianmin chen

    Hi, Fei,
      I can reproduce the issue every time for some excel sheet. Those excel sheet are using same database source: Navision database, configuration database from the website, etc. And then, I did some work:
      I edit global environment variable: VSTO_SUPPRESSDISPLAYALERTS  to 0, and then,
    some of excel sheets have error message next is "The embedded powerpivot data is corrupt. You have the following options", I chose "Attempt to recover the structure of the powerpivot data"; but the reports in pdf shows empty data.
       Code sample is the following, please notice that I set up waiting for 60 seconds to do refreshing, sometimes 90 seconds; the error message comes out in less than 10 seonds, so I do not think that the code of executing the VB script is the issue. 
      Module Module1
        Sub Main()
            'http://www.vbaexpress.com/kb/getarticle.php?kb_id=279
            Julia_RunMacro_NoArgs()
        End Sub
        Sub Julia_RunMacro_NoArgs()
            'Macro purpose:  Use the application.run method to execute
            'a macro without arguments from another workbook
            Dim oExcel As New Excel.Application()
            Dim PathToFile As String, _
            NameOfFile As String, _
            AgentFolder As String, _
            wbTarget As Excel.Workbook, _
            CloseIt As Boolean
            'Set file name and location. You will need to update this info!
            AgentFolder = "xxx\"
            NameOfFile = "C:" & AgentFolder & ".xlsm"
            PathToFile = "C:" & AgentFolder
            'Attempt to set the target workbook to a variable.  If an error is
            'generated, then the workbook is not open, so open it
            On Error Resume Next
            wbTarget = oExcel.Workbooks.Open(NameOfFile)
            If Err.Number <> 0 Then
                'Open the workbook
                Err.Clear()
                wbTarget = oExcel.Workbooks.Open(PathToFile & "\" & NameOfFile)
                CloseIt = True
            End If
            'Check and make sure workbook was opened
            If Err.Number = 1004 Then
                MsgBox("Sorry, but the file you specified does not exist!" _
                & vbNewLine & PathToFile & "\" & NameOfFile)
                Exit Sub
            End If
            On Error GoTo 0
            'Run the macro!  (You will need to update "MacroName" to the
            'name of the macro you wish to run)
            wbTarget.RefreshAll()
            System.Threading.Thread.Sleep(60000)
            oExcel.Run("TestPdf")
            'wbTarget.Close(SaveChanges:=False)
            'oExcel.Quit()
            'wbTarget.Close(SaveChanges:=False)
            If Not wbTarget Is Nothing Then
                wbTarget.Close(SaveChanges:=False)
                wbTarget = Nothing
            End If
            'http://stackoverflow.com/questions/22512868/remove-excel-task-from-task-manager-after-running-from-access-using-vba
            If Not oExcel Is Nothing Then
                oExcel.Quit()
                oExcel = Nothing
            End If
        End Sub
    End Module
    jianmin chen

  • Get read-only error when trying to create via CI

    I have created a component interface of the VCHR_EXPRESS component (along with the proper component fix for an initialization issue). I had VS generate a create_ex XML schema to be used by BizTalk (PS adapter) to create a new voucher. When I try to execute this create xml, I get a "psft.pt8.joa.JOAException: Property is read-only XXXXX" exception. The fields listed in the error log are empty in the XML instance (although the tags exist). For example, I get this error: psft.pt8.joa.JOAException: Property is read-only ADDRESS1_VNDR_1 (1,56). But in my xml instance it looks like this: <ns0:ADDRESS1_VNDR_1></ns0:ADDRESS1_VNDR_1>. There is no value so I'm not trying to set it. Could the error message mean I don't need this field period, i.e. remove it entirely?

    @icloud.com addresses are being rolled out over an unspecified period: you will get one without having to do anything, and it will be additional to your @me.com address. You will get a notification email when your account is updated. You will notice that the alias creation pane shows @icloud.com as the suffix - apparently new @me.com addresses cannot be created and I imagine you will have to wait until your account is upgraded before you can create an alias.

  • CE 7.2 Javastart.exe stopped

    Hi All,
    i downloaded CE 7.2 trial version from sdn in my personal laptop for practising BPM/BRM with NWDS (downloaded from SDN)
    The installation was fine and i have been able to open the CE host name:port url/nwa and browse through all components till 1 hour back
    All of a sudden the SAP MMC is showing javastart. exe is stopped
    This is the log from developer trace. appreciate for any solution to resolve this
    -mike
    trc file: "dev_jstart.new", trc level: 1, release: "720"
    sysno      00
    sid        CE2
    systemid   560 (PC with Windows NT)
    relno      7200
    patchlevel 0
    patchno    22
    intno      20020600
    make       multithreaded, Unicode, optimized
    profile    C:\usr\sap\CE2\SYS\profile\CE2_J00_systech-b5lwcc1
    pid        3828
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      All, egi
    Sat Feb 26 12:01:51 2011
    trace logging activated, max size = 52428800 bytes, 2 versions
    arguments :
      arg[ 0] : C:\usr\sap\CE2\SYS\exe\uc\NTI386\jstart.EXE
      arg[ 1] : pf=C:\usr\sap\CE2\SYS\profile\CE2_J00_systech-b5lwcc1
    F 
    F Sat Feb 26 12:01:52 2011
    F  ********************************************************************************
    F  Java environment properties (C:\usr\sap\CE2\J00\work\jstart.jvm)
    F    root directory    : C:\usr\sap\CE2\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
    F    vendor            : SAP AG
    F    version           : 1.6.0_07
    F    cpu               : x86
    F    java vm type      : server
    F    java vm version   : 6.1.007
    F    jvm library name  : jvm.dll
    F    library path      : C:\usr\sap\CE2\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE2\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
    F    executable path   : C:\usr\sap\CE2\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
    F  ********************************************************************************
    F    SAP extensions    : available
    F  ********************************************************************************
    I  [Thr 3464] MtxInit: 30002 0 2
    trc file: "dev_jstart", trc level: 1, release: "720"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      All, egi
    M 
    M [Thr 3464] Sat Feb 26 12:01:53 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 1492
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3201) [nixxi.cpp    3255]
    E  [Thr 3464] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 33 [enxxtc.c     346]
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 1512
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:01:59 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 26/sock 1512
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:04 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 27/sock 1512
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3201) [nixxi.cpp    3255]
    E  [Thr 3464] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 27 [enxxtc.c     346]
    M 
    M [Thr 3464] Sat Feb 26 12:02:05 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 41/sock 1480
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:11 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 42/sock 1480
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:15 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 43/sock 1480
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3201) [nixxi.cpp    3255]
    E  [Thr 3464] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 43 [enxxtc.c     346]
    M 
    M [Thr 3464] Sat Feb 26 12:02:17 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 49/sock 1472
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:23 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 50/sock 1464
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:26 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 51/sock 1464
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3201) [nixxi.cpp    3255]
    E  [Thr 3464] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 51 [enxxtc.c     346]
    M 
    M [Thr 3464] Sat Feb 26 12:02:29 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 57/sock 1460
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:35 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 58/sock 1452
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:37 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 59/sock 1452
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3201) [nixxi.cpp    3255]
    E  [Thr 3464] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 59 [enxxtc.c     346]
    M 
    M [Thr 3464] Sat Feb 26 12:02:41 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 65/sock 1456
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:47 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 66/sock 1444
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3901) [nixxi.cpp    3255]
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c      881]
    M  [Thr 3464] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c      1956]
    M 
    M [Thr 3464] Sat Feb 26 12:02:48 2011
    M  [Thr 3464] ***LOG Q0I=> NiPConnect2: 192.168.1.101:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
    M  [Thr 3464] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 67/sock 1444
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.1.101:3201) [nixxi.cpp    3255]
    E  [Thr 3464] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 67 [enxxtc.c     346]
    F 
    F [Thr 3464] Sat Feb 26 12:02:52 2011
    F  [Thr 3464] *** ERROR => cannot connect to Message Server. [sfxxmsc.hpp  788]
    F  [Thr 3464] *** LOG => connecting to Message Server.
    F  [Thr 3464] *** LOG => Run level 0 completed.
    F  [Thr 3464] *** LOG => Instance state is "Instance terminated" (STOPPED @ 0, INACTIVE).
    I  [Thr 3464] MPI: dynamic quotas disabled.
    I  [Thr 3464] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    M  [Thr 3464] *** ERROR => MsINiWrite: NiBufSend (rc=NIETIMEOUT) [msxxi.c      2730]
    M  [Thr 3464] *** ERROR => MsIDetach: MsINiWrite (rc=MSENILAYER) [msxxi.c      1299]
    F 
    F  ********************************************************************************
    F  *** ERROR => Cannot connect to Message Server.
    F  ***
    F  *** Please see section 'Instance initialization issues'
    F  *** in SAP Note 1316652 for additional information and trouble shooting advice.
    F  ********************************************************************************
    F 
    F  [Thr 3464] *** LOG => exiting (exitcode -21000, retcode 2).

    Hi Michael,
    This is because when your DB server instance is down. I had a similar problem but now its working fine. Go to control panel -> admin tools -> services  as raghavendra said & enable DB server instance. Then close the MC & reopen it & start the J2EE instance.
    Thanks,
    Arun

  • Sql Injection- Security

    I have an urgent requirement that has to be implemented with regard to sql Injections.
    My application went for security scanning   process and found few security threats with regard to sql injection. we need your valuable support and guidelines to proceed further.
    Project Details: Windows application, VS2008
    Data Base: Sql Server 2008.
    Listed out the issues type and its details elaborately:
    Threat 1: During connection initialization 
    SqlConnection  connection = new SqlConnection(connectionString);
    At this line there is a chance of security threat. we are getting the connection string parameter from web.config as below
    private static readonly string connectionString = ConfigurationManager.AppSettings["ConnectionString"];
     Flaw Information
    Type: Untrusted Initialization 
    Issue: External Control of System or Configuration Setting 
    Attack Vector: system_data_dll.System.Data.SqlClient.SqlConnection.!newinit_0_1
    Function: int ExecuteNonQuery(string, System.Data.CommandType, string, 
    System.Data.SqlClient.SqlParameter[]) 
    Threat 2 : 
     Type: SQL Injection
     Issue: Improper Neutralization of Special Elements used in an SQL Command ('SQLInjection')
     Attack Vector: system_data_dll.System.Data.IDbCommand.ExecuteNonQuery
     Function: int FetchSPExecutedReturnValue(string, System.Collections.IDictionary)
    Threat Line:
     1. command.ExecuteNonQuery();
    There are few more similar threats same as above. pointed out the threat line:
    2.  dataReader = command.ExecuteReader();
    3.  adapter.Fill(ds); 
    4. dataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection);
    I have doubt that the above lines of code are safe from sql injection ? if not how can an attacker attack .
    One more thing like we are not at all passing any hard coded queries to DB. All the inputs are passed as a parameters.
    I am not sure what kind of threat is there with this ( executeNonQuery(), Fill(dataset) and Connection initialization) and how to defend from malicious code/vulnerabilities. 
    Please help me out..... I will be waiting for your valuable support.
    Thanks,
    Purushotham. A

    Thanks for your quick reply....
    We are not passing the hard coded connection string value. We are getting it from Web.config.
    SqlConnection connection = new SqlConnection(connectionString)
    private static readonly string connectionString = ConfigurationManager.AppSettings["ConnectionString"];
    when we pass on the connection string value as such is there any chance of threat from attackers.
    Thanks,
    purushotham.A 

  • Java.lang.NullPointerException running flexunit ant task in 4.1 Beta 2

    Hello,
    After trying to debug this all day, I thought I would ask the community.
    I am trying out the new FU4.1 Beta 2 (3.5) from the downloads page.  We have a working CI system set up with 4.0, and I thought trying out 4.1 beta 2 would simply be a matter of replacing the binaries in my lib folder and re-running the ant script.  Evidently not, or else I am missing something.
    After updating to the 4.1 Beta 2 binaries, if I re-run a sample project in Eclipse, the build fails with a java NullPointerException when the <flexunit> ant task is invoked. We have an involved setup that uses the groovy AntBuilder and other esoteric constructs, so I thought I would create a very simple test script similar to the sample CI project to see if that would work.  Unfortunately, I am still seeing the NPE.  The worst part is that there is absolutely no debug information provided - no message, no traceback.  I even attached the Ant source and debugged it. I could see the NPE being caught, but it contained a null message and null traceback.
    Here is the simplified ant script:
    <project name="tests" basedir=".">
        <target name="test-init" depends="">
            <mkdir dir="${build.dir}"/>
            <mkdir dir="${reports.dir}"/>
            <mkdir dir="${reports.xml}"/>
            <mkdir dir="${reports.html}"/>
            <!-- Setup Flex and FlexUnit ant tasks -->
            <!-- You can set this directly so mxmlc will work correctly, or set
            <taskdef resource="flexUnitTasks.tasks" classpath="${lib}/flexUnitTasks-4.1.0-beta2.18.jar" />
        </target>
        <target name="run-flex-tests" depends="test-init">
          <sequential>
            <!-- Execute TestRunner.swf as FlexUnit tests and publish reports -->
            <flexunit
                swf="${build.dir}/TestRunner.swf"
                toDir="${reports.xml}"
                haltonfailure="false"
                verbose="true"
                localTrusted="true"
                timeout="60000"/>
            <!-- Generate readable JUnit-style reports -->
            <junitreport todir="${reports.xml}">
                <fileset dir="${reports.xml}">
                    <include name="TEST-*.xml" />
                </fileset>
                <report format="frames" todir="${reports.html}" />
            </junitreport>
          </sequential>   
        </target>
    </project>
    The output is:
    Buildfile: C:\EclipseWorkspace\tests\Source\Flex\build_test.xml
    test-init:
    run-flex-tests:
    [flexunit] Validating task attributes ...
    BUILD FAILED
    C:\EclipseWorkspace\tests\Source\Flex\build_test.xml:23: java.lang.NullPointerException
    Total time: 297 milliseconds
    Is there something obvious I am missing?
    Thanks for any help!
    Trevor

    Brian,
    OK, a colleague worked with me (thanks, John!) to debug the problem a little further, and I think we found the fundamental problem.  I wanted to post that info to save you some time...
    Aside: One thing we did have to do was to rebuild the flexUnitTasks.jar to include debug information, since the binary in the 4.1 beta 2 package did not have debug=true.  I'd suggest that we might want to change the build script to build the binaries with debug moving forward.
    Back to the problem.
    The NullPointerException is thrown in TaskConfiguration::validateSharedProperties(), when equals() is invoked. Here is the code snippet:
       //if we can't find the FLEX_HOME and we're using ADL or compilation
       if((flexHome == null || !flexHome.exists()) && (testRunConfiguration.getPlayer().equals("air") || shouldCompile()))
          throw new BuildException("Please specify, or verify the location for, the FLEX_HOME property.  "
                + "It is required when testing with 'air' as the player or when using the 'testSource' element.  "
                + "It should point to the installation directory for a Flex SDK.");
    In my case, I do not have a FLEX_HOME property set in Ant currently.  I'll bet most folks have this set, so the logic would run differently for them. For my case, the (flexHome == null) check is true.  That means that the testRunConfiguration.getPlayer().equals("air")check will occur next, and here is the problem. The "player" member is not set in the testRunConfiguration yet at this point, so testRunConfiguration.getPlayer() returns null. testRunConfiguration.setPlayer() is called in generateDefaults().  But generateDefaults() is not called until after validateSharedProperties() is called.  So, if properties initialization could be improved here and I think this code will run more robustly.
    I can work-around my issue temporarily by just setting a FLEX_HOME property in Ant.  But I hope you will agree that the initialization issue with "player" still should be addressed. Would you like me to open a bug report, or is this thread enough?
    Thanks,
    Trevor

  • J2EE SERVER 0 not running after ADS Update

    Hi Experts,
    I have updated ADS patch 10 in our server, but ADS update terminated after that J2ee server not comming up. Please find the Log file.
    trc file: "D:\usr\sap\MID\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID17582250
    pid         : 2588
    system name : MID
    system nr.  : 01
    started at  : Tue Dec 22 13:58:33 2009
    arguments       :
           arg[00] : D:\usr\sap\MID\DVEBMGS01\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\MID\SYS\profile\MID_DVEBMGS01_mvglqas
           arg[02] : -DSAPINFO=MID_01_server
           arg[03] : pf=D:\usr\sap\MID\SYS\profile\MID_DVEBMGS01_mvglqas
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=1201
           arg[06] : -DSAPSYSTEM=01
           arg[07] : -DSAPSYSTEMNAME=MID
           arg[08] : -DSAPMYNAME=mvglqas_MID_01
           arg[09] : -DSAPPROFILE=D:\usr\sap\MID\SYS\profile\MID_DVEBMGS01_mvglqas
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2540] Tue Dec 22 13:58:33 2009
    [Thr 2540] *** WARNING => INFO: Unknown property [instance.box.number=MIDDVEBMGS01mvglqas] [jstartxx.c   841]
    [Thr 2540] *** WARNING => INFO: Unknown property [instance.en.host=mvglqas] [jstartxx.c   841]
    [Thr 2540] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c   841]
    [Thr 2540] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : mvglqas
    -> ms port    : 3902
    -> OS libs    : D:\usr\sap\MID\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : mvglqas
    -> ms port    : 3902
    -> os libs    : D:\usr\sap\MID\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID17582200 : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID17582250 : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID17582200           : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID17582250           : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 2540] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 2540] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 2560] JLaunchRequestFunc: Thread 2560 started as listener thread for np messages.
    [Thr 704] WaitSyncSemThread: Thread 704 started as semaphore monitor thread.
    [Thr 2540] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 2540] CPIC (version=700.2006.09.13)
    [Thr 2540] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_13-x64
    [Thr 2540] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\MID\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID17582250]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_13-x64
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine. services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : D:\usr\sap\MID\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\MID\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\MID\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\MID\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 2540] JLaunchISetDebugMode: set debug mode [no]
    [Thr 5060] JLaunchIStartFunc: Thread 5060 started as Java VM thread.
    [Thr 5060] *** WARNING => Using non-standard VM option 'services.ts.jts.ots.PortableInterceptor.JTSInitializer' [jhvmxx.c     1007]
    [Thr 5060] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
         Java Parameters: -Xss2m
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.
    -> arg[ 24]: services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 25]: -Dsys.global.dir=D:\usr\sap\MID\SYS\global
    -> arg[ 26]: -Dapplication.home=D:\usr\sap\MID\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=D:\usr\sap\MID\DVEBMGS01\exe\jstartup.jar;D:\usr\sap\MID\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=C:\j2sdk1.4.2_13-x64\jre\bin\server;C:\j2sdk1.4.2_13-x64\jre\bin;C:\j2sdk1.4.2_13-x64\bin;D:\usr\sap\MID\DVEBMGS01\j2ee\os_libs;C:\oracle\MVS\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\usr\sap\MID\SYS\exe\uc\NTAMD64\sappfpar.exe;D:\usr\sap\MID\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=2588
    -> arg[ 35]: -Djstartup.ownHardwareId=T1140933696
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=MID_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=1201
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=MID
    -> arg[ 44]: -DSAPMYNAME=mvglqas_MID_01
    -> arg[ 45]: -DSAPPROFILE=D:\usr\sap\MID\SYS\profile\MID_DVEBMGS01_mvglqas
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=MID
    -> arg[ 51]: -DSAPMYNAME=mvglqas_MID_01
    -> arg[ 52]: -DSAPDBHOST=mvglqas
    -> arg[ 53]: -Dj2ee.dbhost=mvglqas
    Unrecognized option: services.ts.jts.ots.PortableInterceptor.JTSInitializer
    [Thr 5060] *** ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-1) [jhvmxx.c     542]
    [Thr 5060] *** ERROR => Cannot load Java VM (server) (rc=-1) [jlnchxxi.c   752]
    [Thr 5060] **********************************************************************
    ERROR => Java VM initialization failed.
    Please see SAP Note 943602 , section 'Java VM initialization issues'
    for additional information and trouble shooting.
    [Thr 5060] JLaunchCloseProgram: good bye (exitcode = -1)
    Thanks  in Advance
    Jose H

    Hi Markus,
    I have changed the heap size but the status is same.
    when i am trying to open the Visula Admin
    "Default" its shows
    "Unable to lookup connection default
    http://<host>:8101/msgserver/text/logon return empty list of connection parameter
    I ihave created the new connection with port 50104 user name J2EE_ADMIN and give the password
    I got the other error End of stream reached unexpectly during input from socket [addr=/local ip, port=50104,localport=2485]
    find the trace file
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[./log/defaultTrace.trc]/>
    <!PATTERN[defaultTrace.trc]/>
    <!FORMATTER[com.sap.tc.logging.ListFormatter]/>
    <!ENCODING[Cp1252]/>
    <!FILESET[0, 20, 10485760]/>
    <!PREVIOUSFILE[defaultTrace.19.trc]/>
    <!NEXTFILE[defaultTrace.1.trc]/>
    <!LOGHEADER[END]/>
    #1.5#001AA00F0673000000000015000000FC000470C650D48281#1249896968781#System.err##System.err#######Thread[Thread-1,5,main]##0#0#Error##Plain###com.sap.engine.frame.core.configuration.ConfigurationLockedException: Cannot lock Configuration; it is already locked.
         at com.sap.engine.core.configuration.impl.ServerEnvironment.addLock(ServerEnvironment.java:316)
         at com.sap.engine.core.configuration.impl.ServerEnvironment.addLock(ServerEnvironment.java:340)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:756)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:734)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:693)
         at com.sap.engine.core.cache.impl.spi.storage.DBStorage.<init>(DBStorage.java:64)
         at com.sap.engine.core.cache.impl.CacheManagerImpl.init(CacheManagerImpl.java:223)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:560)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:254)
         at com.sap.engine.core.Framework.start(Framework.java:188)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:61)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: com.sap.engine.frame.core.locking.LockException: Cannot lock [2009081015060876500000mvglqas.....................17582250, !J2EE_CONFIGURATION_MANAGER, 94d735ee/@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@, X]; it is in use by another owner. The lock collision occurred with user <internal>.
         at com.sap.engine.core.locking.impl3.LockingManagerImpl.lockInternal(LockingManagerImpl.java:257)
         at com.sap.engine.core.locking.AbstractLockingManagerImpl.lock(AbstractLockingManagerImpl.java:421)
         at com.sap.engine.core.locking.AbstractLockingManagerImpl.lock(AbstractLockingManagerImpl.java:441)
         at com.sap.engine.core.locking.ServerInternalLockingImpl.lock(ServerInternalLockingImpl.java:42)
         at com.sap.engine.core.configuration.impl.ServerEnvironment.addLock(ServerEnvironment.java:312)
         ... 15 more
    #1.5#001AA00F0673002200000000000000FC000470C6520CD509#1249896989250#com.sap.caf.um.metadata.imp.MetaDataTools##com.sap.caf.um.metadata.imp.MetaDataTools.MetaDataTools()#######SAPEngine_System_Thread[impl:5]_46##0#0#Info#1#/System/Server#Plain###sap.com caf/um/metadata/imp MAIN_APL70VAL_C 935484#
    #1.5#001AA00F0673002B00000000000000FC000470C652194CAA#1249896990078#com.sap.caf.um.relgroups.imp.persistence.DataSource##com.sap.caf.um.relgroups.imp.persistence.DataSource.DataSource()#######SAPEngine_System_Thread[impl:5]_20##0#0#Info#1#/System/Server#Plain###sap.com caf/um/relgroups/imp MAIN_APL70VAL_C 935567#
    #1.5#001AA00F0673002C00000001000000FC000470C652196EC5#1249896990078#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.newProperties(int prcs, int conn)#######SAPEngine_System_Thread[impl:5]_36##0#0#Error#1#/System/Server#Java###enter  newProperties()##
    #1.5#001AA00F0673002B00000002000000FC000470C6522C2655#1249896991328#com.sap.caf.um.relgroups.imp.principals.RelGroupFactory##com.sap.caf.um.relgroups.imp.principals.RelGroupFactory.RelGroupFactory()#######SAPEngine_System_Thread[impl:5]_20##0#0#Info#1#/System/Server#Plain###sap.com caf/um/relgroups/imp MAIN_APL70VAL_C 935567#
    #1.5#001AA00F0673003800000000000000FC000470C6522E45DE#1249896991468#com.sap.engine.services.iiop.server##com.sap.engine.services.iiop.server.PICurrentImpl#######SAPEngine_System_Thread[impl:5]_65##0#0#Error##Plain###
    java.lang.NullPointerException
         at com.sap.engine.services.iiop.internal.interceptors.PICurrentImpl.getThreadSlotTable(PICurrentImpl.java:85)
         at com.sap.engine.services.iiop.internal.giop.ClientRequest.<init>(ClientRequest.java:66)
         at com.sap.engine.services.iiop.server.portable.Delegate_1_2$ClientRequest_1_2.<init>(Delegate_1_2.java:41)
         at com.sap.engine.services.iiop.server.portable.Delegate_1_2.createRequestLocal(Delegate_1_2.java:32)
         at com.sap.engine.services.iiop.server.portable.Delegate.createRequest(Delegate.java:370)
         at com.sap.engine.services.iiop.server.portable.Delegate.request(Delegate.java:170)
         at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
         at com.adobe.service._FontManagerStub.getAdobeServerFontDirectory(_FontManagerStub.java:18)
         at com.adobe.document.XMLFormService.getFontDirectories(Unknown Source)
         at com.adobe.document.XMLFormService.onStartService(Unknown Source)
         at com.adobe.service.Service.start(Service.java:387)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
    Looking for your urgetnt response
    Thanks & Regards
    Jose H

  • Dispatcher of J2EE Engine does not start

    I have the following problem, we restart the j2ee engine and the dispatcher does not come up. The server and SDM works fine
    <b>dev_dispatcher:</b>
    trc file: "/usr/sap/Q82/JC00/work/dev_dispatcher", trc level: 1, release: "700"
    node name   : ID2430700
    pid         : 1192142
    system name : Q82
    system nr.  : 00
    started at  : Tue Nov 20 10:47:45 2007
    arguments       :
           arg[00] : /usr/sap/Q82/JC00/exe/jlaunch
           arg[01] : pf=/usr/sap/Q82/SYS/profile/Q82_JC00_sapQ82
           arg[02] : -DSAPINFO=Q82_00_dispatcher
           arg[03] : pf=/usr/sap/Q82/SYS/profile/Q82_JC00_sapQ82
    [Thr  1] Tue Nov 20 10:47:45 2007
    [Thr  1] *** WARNING => INFO: Unknown property [instance.box.number=Q82JC00sapq82] [jstartxx_mt. 841]
    [Thr  1] *** WARNING => INFO: Unknown property [instance.en.host=sapQ82] [jstartxx_mt. 841]
    [Thr  1] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx_mt. 841]
    [Thr  1] *** WARNING => INFO: Unknown property [instance.system.id=00] [jstartxx_mt. 841]
    JStartupReadInstanceProperties: read instance properties [/usr/sap/Q82/JC00/j2ee/cluster/instance.properties]
    -> ms host    : sapQ82
    -> ms port    : 3901
    -> OS libs    : /usr/sap/Q82/JC00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
    Instance properties
    -> ms host    : sapQ82
    -> ms port    : 3901
    -> os libs    : /usr/sap/Q82/JC00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
    -> [01] bootstrap_ID2430700  : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
    -> [02] bootstrap_ID2430750  : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
    Worker nodes
    -> [00] ID2430700            : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
    -> [01] ID2430750            : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
    [Thr  1] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr  1] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 258] JLaunchRequestFunc: Thread 258 started as listener thread for np messages.
    [Thr 515] WaitSyncSemThread: Thread 515 started as semaphore monitor thread.
    [Thr  1] SigISetDefaultAction : default handling for signal 20
    [Thr  1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr  1] CPIC (version=700.2006.09.13)
    [Thr  1] [Node: dispatcher] java home is set by profile parameter
         Java Home: /usr/java14_64
    [Thr  1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/Q82/JC00/exe/jvmx.jar
    JStartupIReadSection: read node properties [ID2430700]
    -> node name          : dispatcher
    -> node type          : dispatcher
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : /usr/java14_64
    -> java parameters    : -Xj9 -Xgcpolicy.gencon -verbose:gc -Xmn70m -Xdisableexplicitgc -Djava.security.policy=.\java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1
    -> java vm version    : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
    -> java vm vendor     : IBM J9 VM (IBM Corporation)
    -> java vm type       : server
    -> java vm cpu        : ppc64
    -> heap size          : 202M
    -> init heap size     : 202M
    -> root path          : /usr/sap/Q82/JC00/j2ee/cluster/dispatcher
    -> class path         : ./bin/boot/boot.jar:./bin/system/bytecode.jar:.
    -> OS libs path       : /usr/sap/Q82/JC00/j2ee/os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : /usr/sap/Q82/JC00/exe/jstartup.jar:/usr/sap/Q82/JC00/exe/jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50000
    -> shutdown timeout   : 120000
    [Thr  1] JLaunchISetDebugMode: set debug mode [no]
    [Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [dispatcher]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Xj9
    -> arg[  4]: -Xgcpolicy.gencon
    -> arg[  5]: -verbose:gc
    -> arg[  6]: -Xmn70m
    -> arg[  7]: -Xdisableexplicitgc
    -> arg[  8]: -Djava.security.policy=.\java.policy
    -> arg[  9]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 10]: -Djco.jarm=1
    -> arg[ 11]: -Dsys.global.dir=/usr/sap/Q82/SYS/global
    -> arg[ 12]: -Dapplication.home=/usr/sap/Q82/JC00/exe
    -> arg[ 13]: -Djava.class.path=/usr/sap/Q82/JC00/exe/jstartup.jar:/usr/sap/Q82/JC00/exe/jvmx.jar:./bin/boot/boot.jar:./bin/system/bytecode.jar:.
    -> arg[ 14]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/Q82/JC00/exe:/usr/sap/Q82/JC00/exe:/usr/sap/Q82/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/Q82/JC00/exe::/usr/lib:/usr/sap/Q82/JC00/j2ee/os_libs:/usr/sap/Q82/JC00/exe:/usr/sap/Q82/JC00/exe:/usr/lib:/lib:/usr/sap/Q82/SYS/exe/run:/oracle/client/10x_64/instantclient
    -> arg[ 15]: -Dmemory.manager=202M
    -> arg[ 16]: -Xmx202M
    -> arg[ 17]: -Xms202M
    -> arg[ 18]: -DLoadBalanceRestricted=no
    -> arg[ 19]: -Djstartup.mode=JCONTROL
    -> arg[ 20]: -Djstartup.ownProcessId=1192142
    -> arg[ 21]: -Djstartup.ownHardwareId=R1572408088
    -> arg[ 22]: -Djstartup.whoami=dispatcher
    -> arg[ 23]: -Djstartup.debuggable=no
    -> arg[ 24]: -DSAPINFO=Q82_00_dispatcher
    -> arg[ 25]: -DSAPSTARTUP=1
    -> arg[ 26]: -DSAPSYSTEM=00
    -> arg[ 27]: -DSAPSYSTEMNAME=Q82
    -> arg[ 28]: -DSAPMYNAME=sapQ82_Q82_00
    -> arg[ 29]: -DSAPDBHOST=sapQ82
    -> arg[ 30]: -Dj2ee.dbhost=sapQ82
    [Thr 772] *** ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-6) [jhvmxx_mt.c  542]
    [Thr 772] *** ERROR => Cannot load Java VM (server) (rc=-1) [jlnchxxi_mt. 752]
    [Thr 772] **********************************************************************
    ERROR => Java VM initialization failed.
    Please see SAP Note 943602 , section 'Java VM initialization issues'
    for additional information and trouble shooting.
    [Thr 772] SigISetIgnoreAction : SIG_IGN for signal 20
    [Thr 772] JLaunchCloseProgram: good bye (exitcode = -1)
    Does somebody has any ideas?
    Regards Peter

    Hi folks,
    i solved it by myself. There was a wrong javaparameter in the settings of the dispatcher.
    -Xgcpolicy.gencon instead of -Xgcpolicy:gencon, my colleague has found it out.
    Regards Peter

  • Cannot start j2ee engine

    Hi ALL.
    The server is now failing  sadanly with the following message in the dev_server0 log file (work directory)
    JStartupIReadSection: read node properties [ID18437450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : D:\j2sdk1.4.2_13
    -> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djava.io.tmpdir=d:\EP_TEMP -Dcm.tmpdir=d:\EP_TEMP -Djco.trace_level=10 -Djco.trace_path=d:\trace -Djavax.security.auth.useSubjectCredsOnly=false -Djava.security.krb5.conf=D:\usr\sap\POT\SYS\global\kerberos\ID184374\krb5.conf -Dsun.security.krb5.debug=true -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine. services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : D:\usr\sap\POT\JC01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\POT\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\POT\JC01\exe\jstartup.jar;D:\usr\sap\POT\JC01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 2928] JLaunchISetDebugMode: set debug mode [no]
    [Thr 2968] JLaunchIStartFunc: Thread 2968 started as Java VM thread.
    [Thr 2968] *** WARNING => Using non-standard VM option 'services.ts.jts.ots.PortableInterceptor.JTSInitializer' [jhvmxx.c     1007]
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djava.security.policy=./java.policy
    -> arg[  4]: -Djava.security.egd=file:/dev/urandom
    -> arg[  5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[  6]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[  7]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[  8]: -Djco.jarm=1
    -> arg[  9]: -XX:MaxPermSize=256M
    -> arg[ 10]: -XX:PermSize=256M
    -> arg[ 11]: -XX:NewSize=171M
    -> arg[ 12]: -XX:MaxNewSize=171M
    -> arg[ 13]: -XX:+DisableExplicitGC
    -> arg[ 14]: -verbose:gc
    -> arg[ 15]: -Xloggc:GC.log
    -> arg[ 16]: -XX:+PrintGCDetails
    -> arg[ 17]: -XX:+PrintGCTimeStamps
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Dsun.io.useCanonCaches=false
    -> arg[ 20]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 21]: -XX:SurvivorRatio=2
    -> arg[ 22]: -XX:TargetSurvivorRatio=90
    -> arg[ 23]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 24]: -Djava.io.tmpdir=d:\EP_TEMP
    -> arg[ 25]: -Dcm.tmpdir=d:\EP_TEMP
    -> arg[ 26]: -Djco.trace_level=10
    -> arg[ 27]: -Djco.trace_path=d:\trace
    -> arg[ 28]: -Djavax.security.auth.useSubjectCredsOnly=false
    -> arg[ 29]: -Djava.security.krb5.conf=D:\usr\sap\POT\SYS\global\kerberos\ID184374\krb5.conf
    -> arg[ 30]: -Dsun.security.krb5.debug=true
    -> arg[ 31]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.
    -> arg[ 32]: services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 33]: -Dsys.global.dir=D:\usr\sap\POT\SYS\global
    -> arg[ 34]: -Dapplication.home=D:\usr\sap\POT\JC01\exe
    -> arg[ 35]: -Djava.class.path=D:\usr\sap\POT\JC01\exe\jstartup.jar;D:\usr\sap\POT\JC01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 36]: -Djava.library.path=D:\j2sdk1.4.2_13\jre\bin\server;D:\j2sdk1.4.2_13\jre\bin;D:\j2sdk1.4.2_13\bin;D:\usr\sap\POT\JC01\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;D:\usr\sap\POT\SYS\exe\uc\NTI386
    -> arg[ 37]: -Dmemory.manager=1024M
    -> arg[ 38]: -Xmx1024M
    -> arg[ 39]: -Xms1024M
    -> arg[ 40]: -DLoadBalanceRestricted=no
    -> arg[ 41]: -Djstartup.mode=JCONTROL
    -> arg[ 42]: -Djstartup.ownProcessId=1532
    -> arg[ 43]: -Djstartup.ownHardwareId=O1715315850
    -> arg[ 44]: -Djstartup.whoami=server
    -> arg[ 45]: -Djstartup.debuggable=no
    -> arg[ 46]: -DSAPINFO=POT_01_server
    -> arg[ 47]: -DSAPSTARTUP=1
    -> arg[ 48]: -DSAPSYSTEM=01
    -> arg[ 49]: -DSAPSYSTEMNAME=POT
    -> arg[ 50]: -DSAPMYNAME=SESBPORTUDV_POT_01
    -> arg[ 51]: -DSAPDBHOST=SESBSQL01
    -> arg[ 52]: -Dj2ee.dbhost=SESBSQL01\SAP
    Unrecognized option: services.ts.jts.ots.PortableInterceptor.JTSInitializer
    [Thr 2968] *** ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-1) [jhvmxx.c     542]
    [Thr 2968] *** ERROR => Cannot load Java VM (server) (rc=-1) [jlnchxxi.c   752]
    [Thr 2968] **********************************************************************
    ERROR => Java VM initialization failed.
    Please see SAP Note 943602 , section 'Java VM initialization issues'
    for additional information and trouble shooting.
    [Thr 2968] JLaunchCloseProgram: good bye (exitcode = -1)
    The server has 4Gb of memory, enough disk space and is running the correct JDK version.
    Plz.
    Any ideas?

    I know I tyed all the thing. But at last her is
    dev_bootstrap.
    And Thanks for help.
    trc file: "D:\usr\sap\POT\JC01\work\dev_bootstrap", trc level: 1, release: "700"
    node name   : bootstrap
    pid         : 788
    system name : POT
    system nr.  : 01
    started at  : Thu Sep 18 10:04:34 2008
    arguments       :
           arg[00] : D:\usr\sap\POT\JC01\exe\jlaunch.exe
           arg[01] : pf=D:\usr\sap\POT\SYS\profile\POT_JC01_SESBPORTUDV
           arg[02] : -DSAPINFO=POT_01_bootstrap
           arg[03] : pf=D:\usr\sap\POT\SYS\profile\POT_JC01_SESBPORTUDV
    [Thr 1452] Thu Sep 18 10:04:34 2008
    [Thr 1452] *** WARNING => INFO: Unknown property [instance.box.number=POTJC01sesbportudv] [jstartxx.c   841]
    [Thr 1452] *** WARNING => INFO: Unknown property [instance.en.host=SESBPORTUDV] [jstartxx.c   841]
    [Thr 1452] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
    [Thr 1452] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties]
    -> ms host    : SESBPORTUDV
    -> ms port    : 3900
    -> OS libs    : D:\usr\sap\POT\JC01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : SESBPORTUDV
    -> ms port    : 3900
    -> os libs    : D:\usr\sap\POT\JC01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : normal
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID18437400 : D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID18437450 : D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID18437400           : D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties
    -> [01] ID18437450           : D:\usr\sap\POT\JC01\j2ee\cluster\instance.properties
    [Thr 1452] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 1452] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1504] WaitSyncSemThread: Thread 1504 started as semaphore monitor thread.
    [Thr 1444] JLaunchRequestFunc: Thread 1444 started as listener thread for np messages.
    [Thr 1452] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 1452] CPIC (version=700.2006.09.13)
    [Thr 1452] [Node: bootstrap] java home is set by profile parameter
         Java Home: D:\j2sdk1.4.2_13
    [Thr 1452] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\POT\JC01\exe\jvmx.jar
    JStartupIReadSection: read node properties [bootstrap]
    -> node name          : bootstrap
    -> node type          : bootstrap
    -> node execute       : yes
    -> java path          : D:\j2sdk1.4.2_13
    -> java parameters    : -Djco.jarm=1
    -> java vm version    : 1.4.2_13-b06
    -> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : x86
    -> heap size          : 256M
    -> root path          : D:\usr\sap\POT\JC01\j2ee\cluster
    -> class path         : .\bootstrap\launcher.jar
    -> OS libs path       : D:\usr\sap\POT\JC01\j2ee\os_libs
    -> main class         : com.sap.engine.offline.OfflineToolStart
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\POT\JC01\exe\jstartup.jar;D:\usr\sap\POT\JC01\exe\jvmx.jar
    -> parameters         : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0184374
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 60000
    -> shutdown timeout   : 120000
    [Thr 1592] JLaunchIStartFunc: Thread 1592 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [bootstrap]
    -> stack   : 262144 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -Dsys.global.dir=D:\usr\sap\POT\SYS\global
    -> arg[  5]: -Dapplication.home=D:\usr\sap\POT\JC01\exe
    -> arg[  6]: -Djava.class.path=D:\usr\sap\POT\JC01\exe\jstartup.jar;D:\usr\sap\POT\JC01\exe\jvmx.jar;.\bootstrap\launcher.jar
    -> arg[  7]: -Djava.library.path=D:\j2sdk1.4.2_13\jre\bin\server;D:\j2sdk1.4.2_13\jre\bin;D:\j2sdk1.4.2_13\bin;D:\usr\sap\POT\JC01\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;D:\usr\sap\POT\SYS\exe\uc\NTI386
    -> arg[  8]: -Dmemory.manager=256M
    -> arg[  9]: -Xmx256M
    -> arg[ 10]: -DLoadBalanceRestricted=no
    -> arg[ 11]: -Djstartup.mode=BOOTSTRAP
    -> arg[ 12]: -Djstartup.ownProcessId=788
    -> arg[ 13]: -Djstartup.ownHardwareId=O1715315850
    -> arg[ 14]: -Djstartup.whoami=bootstrap
    -> arg[ 15]: -Djstartup.debuggable=yes
    -> arg[ 16]: -DSAPINFO=POT_01_bootstrap
    -> arg[ 17]: -DSAPSTARTUP=1
    -> arg[ 18]: -DSAPSYSTEM=01
    -> arg[ 19]: -DSAPSYSTEMNAME=POT
    -> arg[ 20]: -DSAPMYNAME=SESBPORTUDV_POT_01
    -> arg[ 21]: -DSAPDBHOST=SESBSQL01
    -> arg[ 22]: -Dj2ee.dbhost=SESBSQL01\SAP
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 1592] Thu Sep 18 10:04:35 2008
    [Thr 1592] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [bootstrap]
    -> arg[  0]: com.sap.engine.bootstrap.Bootstrap
    -> arg[  1]: ./bootstrap
    -> arg[  2]: ID0184374
    [Thr 1592] Thu Sep 18 10:04:36 2008
    [Thr 1592] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 1604] Thu Sep 18 10:04:41 2008
    [Thr 1604] JLaunchIExitJava: exit hook is called (rc = 0)
    [Thr 1604] JLaunchCloseProgram: good bye (exitcode = 0)

Maybe you are looking for

  • Spotlight doesn't search numbers in the file name

    I have some videos of my favorite series and I have problems trying to find an specific episodes. For exemple, if the file name is [ScrubsS02E03_My_CaseStudy.rmvb], Spotlight will not return any results if I type [scrubs 03]. Am I doing something wro

  • Youtube doesn't display correctly since I installed latest version of firefox

    youtube doesn't display correctly anymore...adobe flash has been updated and java is enabled. This is what it looks like now... "Loading... Videos Music Shows Trailers Live All Categories Categories "

  • Linking page to website

    Hi, this is my first time making a website and I am using dreamweaver CS3, and everything is about done, I made the photo gallery in JAlbum and I linked my homepage to the photo gallery, but I cannot seem to make a link on the gallery page, to come b

  • I can't download anything on my iPod 5

    Whenever I try to download any apps on my iPod 5th gen (iOS 8.2) it never works. If I try to download an app, I press the 'Get' button then press Install. I put my Apple ID in and it accepts it and starts loading but then just stops and goes back to

  • Keyboard clicks but does not change color?

    New iPad Air 2 has a strange issue with the keyboard.  I turned on the clicking sound which works but the keys do not change from white to black when you touch them.  I cannot find a setting to do that.  Did I miss something?