Inline Attachment Functionality

Hi,
I have added the OAF Functionality of 'attachmentLink' in a table. It worked fine in JDev. Hovering over the icon should pop-up a small window. But nothing is coming up in the development environment, even with the pop-up blocker disabled. Am I missing something?
Thank you!
Edited by: 986939 on Feb 8, 2013 2:41 AM

Hello Aiswarya:
Did you resolve this issue? could you please tell me how can i do it? i have the same problem.
thanks a lot.

Similar Messages

Attachment functionality in ROS prescreen

Hi all,
The attachment functionality in ROS standard Prescreen is not working in our SRM system. Can somebody please suggest what steps need to be done to make it work?
We are done with the necessary configurations.
Thanks in advance for any suggestions.
Edited by: Aiswarya Chandrasekaran on May 27, 2011 11:02 AM

Hello Aiswarya:
Did you resolve this issue? could you please tell me how can i do it? i have the same problem.
thanks a lot.

Generic Object Services ; create attachment function grey out in Tcode KA03

Hi all,
I would like to know how can I enable create attachment function in GOS toolbar in Tcode KA03.
Currently it was grey out.
However, was tried to use the same function in KS03 and it works.Please help. Thanks!

I just found the solution...
SAP note : 961572
Symptom</u>
In the transactions for displaying cost elements (KA03) and changing cost elements (KA02), the 'Services for Object' function does not work correctly, as most Generic Object Services are unavailable.
Other terms
KA03, KA02, SWO1, K_OBJECT_SERVICES_INITIALIZE, BUS1059, BUS1030
Reason and Prerequisites
The problem is caused by a program error.
Solution
Implement the attached program corrections
Then go to Transaction SW01 (Business Object Builder), enter BUS1059 as the object type, click Change, and make the following changes:
Navigate to Methods -> RevenueType.Display, press F2 to select it, and go to the 'ABAP' tab page: Select the 'Transaction' radio button, enter the name as KA03, and click 'Save'
Navigate to Attributes -> Attribute properties, select the 'Mandatory' checkbox, and click 'Save'
Then change the release status by navigating as follows:
Edit -> Change Release Status -> Object Type -> To implemented
Edit -> Change Release Status -> Object Type -> To released
Then double-click BUS1059 (or select using F2) in SWO1 to reach the 'General' tab page, which should appear as follows:
ObjectType      BUS1059         Revenue element
Object Name      RevenueType
Program          RBUS1059
Objtype status   generated       Saved      released

Problem in file attachment functionality in ERP.

Problem in file attachment functionality in ERP in Invoice Workbench and PO documents. The error is Page Not Found.
Regards
Sridhar

Please post the details of the application release, database version and OS.
user11996389 wrote:
Problem in file attachment functionality in ERP in Invoice Workbench and PO documents. The error is Page Not Found.Please post the steps you follow to reproduce the issue.
Was this working before? If yes, any changes been done recently?
Can you find any errors in Apache/Workflow/Database log files?
Thanks,
Hussein

Enable Attachment function on my Custom form

Dear All,
I am unable to enable attachment function on my Custom Sales Order form. Our form is just like standard form with some minor changes.
Please, help me in this regards.
Regards,
Arsalan

See if this helps
Enabling the attachment icon for custom form created on custom view
External site too
http://oracleappstechnicalworld.blogspot.in/2008/04/attachment-functionality-in-oracle.html
Mahendra

Can we call DMS Attachment Function from ECC to SRM

Hello All,
We have the below requirement.
   a) User Create the RFx(SRM) from PR(ECC) vai CPPR functionality.Now during creation we need to copy the DIR Links of PR to RFx .
b) In SRM RFx ,at item level we need to place a button called "DIR" ,when user click on the button , we need to bring the   DMS Attachment POP UP from ECC to SRM , where user can add new DIR or Delete the DIR.
           Can we do the requirement "b" ? , is there way we can call the "DMS Attachment Function" from SRM? . Kindly share your thoughts.
Thanks
Channa.
DMS Attachment Function"

Dear Channa,
due to your screenshot I saw that you are still working with old object link dynpros.
To grant that allways the currenct screens and authorizations were called please maintain also the value "1" into the "Authorization" column. For further informations on this maintainance please see the attached note 1066915. It's important that you not enter the mentioned screen number wihtout the leading "1" as this number is added automatically by the system (e.g. object MARA 1201 maintain like MARA 201). You can do this in customizing under:
Transaction SPRO
> Cross-Application-Component
     > Document Management
          > Control Data
              > Define screen for object links
If you need the dynpro number or object you will find all standard SAP objects and their screen number in function module CV130 (Screens) by transaction SE80. Please maintain all necessary SAP objects.
Best regards,
Christoph

Document attachment functionality

Hi all
I am trying to explore document attachment functionality in SAP EHS. I am successful with Work Areas and Incident/Accident Management.
I wish, if some body can help with document attachment functionality with risk assessment module in EHS.
Regards
Vikram

hi Vikram,
Over and above what Pavan said, for Risk assessment to have document attachement functionality, you have to define User dfined test type, assign document type to it and then assigned Object type HAS to it.
You can do this by:
SPRO / Environment health and Safety/Industial Hygiene and safety / Basic settings/Specify User defined txt type
Here you create User defined txt type, assign DMS document type to it and for your user defined text type you define object type as HAS: Risk assessment.
With this you will be able to attach documents to your Risk assesments.
Regards,
Niraj Sikligar

This code executes normally in VS2014, despite the fact that an inline member function is not defined in every TU in which it is odr-used.

Consider this code:
header.h:
#include <iostream>
class A{
int i;
public:
A() : i(101) {}
void print();
void g(A&);
cpp1:
#include "header.h"
inline void A::print() { std::cout << i << '\n'; }
int main()
A a;
a.print();
g(a);
cpp2:
#include "header.h"
void g(A& a) { a.print(); }
Note that the member function A::print is defined outside its class with the specifier inline. The code executes normally in VS2014, despite the fact that the member function is odr-used in cpp2, but it is not defined in this file.
I found the following quotes from the C++11 Standard:
9.3/3:
An inline member function (whether static or non-static) may also be defined outside of its class definition provided either its declaration in the class definition or its definition outside of the class definition declares the function as inline.
3.2/3:
An inline function shall be defined in every translation unit in which it is odr-used.
7.1.2/4:
An inline function shall be defined in every translation unit in which it is odr-used and shall have exactly the same definition in every case.
The two last quotes above don't speak exactly about a member function but I believe they should be applied in this case too, as the inline specifier is a hint for the compiler to expand the function inline at the point of call. If we assume the compiler
does this inline expansion, how does it know the definition of the member function, while compiling the cpp2 file?

On 12/31/2014 12:13 PM, Belloc wrote:
C++ is supported on many different systems, with tools provided by many different vendors. Microsoft's linker happens to be pretty smart about merging identical blocks of code. Other toolchains may use linkers that weren't designed with this in mind,
and that would choke on multiple definitions of the same symbol. The C++ standard is written so that it's actually implementable, on as many platforms as possible.
Frankly I don't understand your statement above. What would be the difficulty for any compiler*that is already compliant with 3.2/3 and 7.1.2/4*, to adapt its code, so that each call to an inline function in a TU, which doesn't carry the function
definition, is simply not inlined?
That's the easy part. The "there's identical function definition in every .obj file, and the linker is expected to merge them all together" is the hard part. Normally, if you define a regular (non-inline) function in more than one source
file, you get a linker error. Microsoft's linker has a special way to mark "defined more than once, just pick any copy" block of code (see __declspec(selectany) ). Other linkers may not.
Igor Tandetnik

Customizing the BPM Worklist removing attachment functionality

Hi
I am still new to the BPEL but we would like to remove the attachment functionality from the BPM Worklist. We gave our users attachment functionality of our main jspx page using Frank.Nimphius solution. Hence users do not need to have the attachment functionality within the BPM worklist.
Thanks
Nick

Might be better asked on the SOA Suite forums:
http://forums.oracle.com/forums/category.jspa?categoryID=194

Customize BPM Worklist remove attachment functionality

Hi
I am still new to the BPEL but we would like to remove the attachment functionality from the BPM Worklist. We gave our users attachment functionality of our main jspx page using Frank.Nimphius solution. Hence users do not need to have the attachment functionality within the BPM worklist.
Thanks
Nick

Might be better asked on the SOA Suite forums:
http://forums.oracle.com/forums/category.jspa?categoryID=194

Attachment Functionality in Custom Form

Hi All,
I am developing a custom form. In that custom form i want to give the users the attachment functionality. How could i achieve it?
Please help.
Regards
Santhosh

Hi,
see the file upload component in ADF Faces. SRDemo contains an example of how to upload files to the middle tier. Same is explained in the documentation
http://download-uk.oracle.com/docs/html/B25947_01/toc.htm
Frank

Text is missing after inline attachment

In Mail, I compose an email and include an attachment. Text included in the email but placed after the inline attachment is not received by the recipient. For example, in the following, everything after [ATTACHMENT HERE] is not received.
Dear Joe,
This is some sample text. [ATTACHMENT HERE].
This is more sample text.
Sincerely,
The Sender
Any ideas?

Receiving email client Outlook or an AOL address?
They're both pretty crappy and rendering email.
When sending to these recipients, make sure you have Always send windows friendly attachemnts and Always Insert Attachements at end of message is checked in the Edit>Attachments menu.
Also best to send plain text.
If you need to send the image inline, with formatting and stuff, as you start the message, change the Font to something other than your default font. That font change should flag to Outlook that it is an HTML email and it should render ok. However, combinations of ISPs, Exchange Servers, and server virus scanners can wreak havoc on email as it passes through all the wickets getting pulled apart and put back together.

INLINE attachement not processed

Hi all
i want to process inline attachement so that i can replace c:id by fileName , but how can i know that an email has an INLINE attachement ?
here is my code :
if(disposition == null){
     System.err.println("GOT No attachement contentTye : " + p.getContentType());
else if (disposition.equalsIgnoreCase(Part.ATTACHMENT)){
     System.err.println("we got attachement ! , filename : " + p.getFileName() + "contentTye : " + p.getContentType());
else if (disposition.equalsIgnoreCase(Part.INLINE)){
     System.err.println("we got an INLINE attachement ! , filename : " + p.getFileName() + "contentTye : " + p.getContentType());
else{
     System.err.println("we got unknown disposition :" + disposition); //shouldn't happen !
}Here the Header of a message that contains an INLINE attachement , but my code prints "GOT No attachement contentTye : image/gif;name="header-right.gif"" :
------=_Part_16299_18941790.1232906945413
Content-Type: image/gif;name="header-right.gif"
Content-Transfer-Encoding: base64
Content-Description: header-right.gif
Content-Location: header-right.gif
Content-ID: <header-right.gif>I see no content Disposition in the header , but there is an INLINE attachement and gmail shows it correctly , how can i modify my code to handle inline attachements ?

Just add this line with your code.
               htmlPart.setContent("<img src=\"cid:im1\">","text/html");
               multipart.addBodyPart(htmlPart);
               BodyPart imgPart=new MimeBodyPart();
                  DataSource ds=new FileDataSource(file[1]);
                  imgPart.setDataHandler(new DataHandler(ds));//Setting the header
                  imgPart.setHeader("Content-ID","<im1>");

Replacing Oracle EBS FND Attachment functionality with UCM

I am new to Oracle UCM and wondering about Replacing Oracle EBS FND Attachment functionality (Paper Clip in EBS forms) with UCM. Can we achieve this by simply defining the Attachment Repository using System Administrator Responsibility in EBS? Can you share some documentation on this?
If we have to customize the forms to re-direct the document repository from FND to UCM, please share the steps to do so.

Didn't see the link in your post. may have been stripped.
if you want to use the ebs native attachment lists, what we've done is used a custom bpel composite to load items into the appropriate entity in the fnd_documents and all of those other related ebs tables. this takes webcenter out of it for the most part. you could also load links, similar to the imaging solution's approach. this way, again, uses the ebs attachments, but stores the image in IPM (in the imaging case, that is). there is a link loaded into the fnd tables.
if you want to leverage the ebs-side attachment lists, managed attachments may not be the approach you want to take. You may want to look into the imaging solution or creating a custom process.
-ryan

How to get rid of ' Inline attachment ' duplicate message in Email

Hi ,
When I got email notification in my personal email. I got twice message as per below.
Message body start.
Message body....
*"inline attachement"* --> I got twice these message.
*"inline attachement"* ---> I got twice these message
Message body end.
Could you please help me how to get riid of these duplicate message.? Any help will be appriciate.
Thanks
Raj
Edited by: RajPatel on Apr 8, 2009 8:37 AM

This is crazy. I tried syncing the calendar with Entourage only, to see if it made a difference. I got calendar events duplicated as much as 7 or 8 times on both Entourage and the BlackBerry. Make it stop! Please....?
After I manually return, once again, to just one calendar event by deleting all the extraneous ones, how can I keep this multiplication of events from happening with each sync? It's like all the old syncs are still stuck in there and get added to the calendars. Please help.
Thanks.

Inline Attachment Functionality

Similar Messages

Maybe you are looking for