InlineFrame and external site

I need to use af:inlineFrame and source should refer to http site from https site . added following in web.xml , but still the page is spinning any idea why
<context-param>
<param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
<param-value>never</param-value>
</context-param>

Sorry here is jdev and adf version
Studio Edition Version 11.1.1.7.0
Build JDEVADF_11.1.1.7.0_GENERIC_130226.1400.6493
ADF Business Components 11.1.1.64.93
Java(TM) Platform 1.6.0_35
Oracle IDE 11.1.1.7.40.64.93
Versioning Support 11.1.1.7.40.64.93
I used FF 26.0 and url used is Oracle site , the source is us.oracle.com domain

Similar Messages

External sites and access rights

After a search in oracle portal, only results are shown for item of which a user has access rights. That's great.
Ultrasearch is capable of searching other (non-oracle) sites as well, so the result of a search may include both portal and non-portal results.
How to deal with external sites which haver their own access scheme? We have two sites, one oracle portal site, one of a different vendor. In the future, hopefully, usermanagement will be centralized in one LDAP repository.
I'd love to have one integrated search engine for both sites, which is capable of indexing all pages, but give only those results of which a user is authorized to.
Can this be achieved by ultrasearch?

Hi Ton
In iAS 902, Ultra Search supports crawling of only public data from Portal page groups. These Portal page groups be from different portal instances. Currently, there is no support for limiting the data obtained from Portal page groups to that which a specific user may view.
We are currently working on supporting authorized crawls/searches.
This feature will allow you to perform a search as a specific user X. The search results returned for this user X will only contain links to documents that X is explicitly allowed to view. These documents can reside in multiple portal instances as long as all the portal instances have the same user space (i.e. share the same LDAP server).
So, to summarize, in iAS 902 (and Oracle 92), Ultra Search only supports public searches.
Regards
Edward

Ultrasearch, external sites and access rights

After a search in portal, only results are shown for item of which a user has access rights. That's great.
Ultrasearch is capable of searching other (non-oracle) sites as well, so the result of a search may include both portal and non-portal results.
How to deal with external sites which haver their own access scheme? We have two sites, one oracle portal site, one of a different vendor. In the future, hopefully, usermanagement will be centralized in one LDAP repository.
I'd love to have one integrated search engine for both sites, which is capable of indexing all pages, but give only those results of which a user is authorized to.
Can this be achieved by ultrasearch?

At the moment, Ultra Search has no notion of Access Control for items that it searches so, in effect, Ultra Search can only crawl public content.

I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me

I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me? How can I fix it?

Hi, clara_from_brazi.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue. Also, test connecting the external storage device to the computer with another cable as this can be the issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Apple Computers and Displays: Powering peripherals through USB
http://support.apple.com/kb/HT4049
Cheers,
Jason H.

Display external site within a popup

Hi,
I was trying to figure out how to display an external site within a af:popup. For example I have links on my page and the action method in my backing bean evaluates a URL based on the link that was clicked and this URL is opened as a new window. What I'm trying to do is to open the external link (for ex. www.mycompany.com/myapplication) within a af:popup.

Thanks Vinod,
The URL that I'm trying to invoke, in that I'm passing the userId. So based on that the contents/user data of the page are displayed.
I'm not sure how to have the page source within the af:inlineFrame inside the af:popup. Can you please elaborate.

Time Capsule and External HD as Network Attached Storage

I was wondering if I can
a. Attached and external hard drive to my Time Capsule and access is wirelessly?
b. Back up to that external hard drive using Time Machine?
c. Access that external hard drive and Time Capsule from a remote place off site?
Thanks

a. Yes
b. I think so. But why not just use the TCs hard disk for TM backups?
c. Apparently so based on these instructions I have found: (Haven't tried it myself)
In the Finder preferences check the box "show server" to mount to desktop.
Under Airport Utility:
Disks - check over wan and check file sharing and write down the ip address
Under the Finder, use the GO function to find your server ie the hard drive on the TC. In the window provided type afp://ip address then password if applicable. The hard drive should mount and be shown on the desktop.

How to I get an FLV Skin to display on external sites?

This is thee most frustrating thing! I've been trying to get
my FLV skin to display on other sites when embedded, but the video
is the only thing that shows up. There are no play back controls;
nothing! I can view things just fine on my site (so that is NOT the
problem) – it's just not displaying on other sites.
I am using an FLV component and I do have all the necessary
files loaded in the same folder. It's just when I try embedding the
SWF file on an external site, the only thing that shows up is the
video w/ no controls or skin.
Is there embedding code to include the second SWF file?
OR
Is there a better way in creating a SWF file that includes
the FLV component? ActionScripting or something that needs to be
added???
If so, please explain! I got ALL DAY AND NIGHT! This is
driving me up the wall. There is NOTHING on the web that talks
about this.
Thanks!!!!!

I found a link which informs that not all servers allow the MIME type for "f4v" files. . .
http://forums.devshed.com/flash-help-38/how-do-i-make-f4v-files-play-in-a-web-610155.html
Also, when I tried inserting a FLV object using Media>FLV the menu option only allowed me to insert FLV files, not F4V files. So that comes back to the issue of what type of container you would be using since the Dreamweaver FLV container does not support F4V.

Same internal and external domain names - AGAIN!

Hi all-
Like many of you, I am confronting the problem of having the same FQDN for both my Active Directory domain and Internet domain. For the sake of discussion, let's call the domain rlh.com.
I need to access an externally-hosted website on the rlh.com domain. The site is coded exclusively to use rlh.com and NOT
www.rlh.com. Therefore, the old trick of adding a static www A record on my internal DNS server will not work.
It looks like another option is to install IIS on my DC and then configure some type of forwarding to the external site. While this might work, frankly, I don't want IIS on my DC. It's a DC, not a web server.
Yet a third option, correct me if I'm wrong, looks to be using some type of "split DNS." Though I have not read the particulars (yet) of this solution, I am suspicious of it causing DNS inefficiencies.
All of these solutions look to me to be workarounds. I am preparing to install a new DC (upgrading from 2003 to 2008 R2) and want to FIX the problem, not work around it. That said, it looks like I have two options:
1. Rename my existing 2003 AD domain using rendom
2. Install the new 2008 R2 DC with the new domain name, setup domain trust between the old and new domains, and then use ADMT.
Can someone please comment on my logic here? Does anyone have experience with both of the two options? Is one less painful than the other?
As I preparatory step, I have migrated from my onsite Exchange 2003 server to Office 365. Exchange is no longer present in my organization, though some slight "remnants" may remain in Active Directory. Other than Exchange, I have a
Hyper-V host, 2 SQL Servers, and 3 RDS servers present in my environment.
Thanks.

I realized this was answered, but I would like to add the following comprehensive blog on this subject.
Can't Access Website with Same Name (Split Zone or no Split Brain)
Published by Ace Fekay, MCT, MVP DS on Sep 4, 2009 at 12:11 AM 1278 0
Note - In an AD same name as the external name (split zone) scenario, if you don't want to use WWW in front of URL, such as to access it by
http://domain.com, then scroll down to "So you don't want to use WWW in front of the domain name"
http://blogs.msmvps.com/acefekay/2009/09/03/split-zone-or-no-split-zone-can-t-access-internal-website-with-external-name/
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

How to pop up a new browser window to point to an external site

Please help. we want to popup an new browser window when click on a button and the new window is pointing to an external web site.
I can make it work to point to an external site in the same window. But that is not we want to.
I do see some old posting about this but it does not work for us.
Please anyone knows the detail of the steps and code, probably including any environment setting/configuration if required, response to this thread.
thanks a lot in advance!
ggu

ggu,
This is a gimmicky solution but it works and is reusable. Copy your button template and rename it POP_UP_BUTTON. Get rid of the #LINK# substitution string and replace it with:
window.open('#BUTTON_ATTRIBUTES#')Put the URL you want to go to in the attributes section of the button. Put something like "TO_<DOMAIN>" in the button request so it is not totally gibberish and irrelevant. This would be much nicer if the apex engine did not include the "apex.submit()" code inside of the #LINK# substitution string. Or if they provided a second substitution string just for the URL specified.
Here is the old code:
<button value="#LABEL#" onclick="#LINK#" class="button-default" type="button">
<span>#LABEL#</span>
</button>here is the new code:
<button value="#LABEL#" onclick="window.open('#BUTTON_ATTRIBUTES#')" class="button-default" type="button">
<span>#LABEL#</span>
</button>Cheers,
Tyson Jouglet
Edited by: Tyson Jouglet on Jun 17, 2011 8:50 AM

SharePoint 2013 - Office Web Apps - Internal and External Use

I have successfully installed SharePoint 2013 and Office Web Apps on Azure VMs inside an Azure Virtual Network (IaaS model). Everyting is working well. However, my testing has shown that external users and internal users can't use Office Web Apps at the
same time.
Office Web Apps, installed on its own vm, accomodates an external and internal URL quite well. However, SharePoint 2013 appears to only allow one setting for WOPI Zone, either internal or external but not both. I've set the WOPI zone to Internal-HTTPS (Set-SPWOPIZone
–Zone “internal-https”). OWA works just fine if accessed from inside the Azure Virtual Network. However, if I try to access from outside the Virtual Network, from the Internet, Office Web Apps fails. The exact oppisite is also true. I can set WOPI Zone to
External-HTTPS and accessing from the Internet works fine, but accessing inside the Virtual Network fails.
Am I missing something? I, obviously, want Office Webs Apps to function properly for both internal and external users simultaneously.
I appreciate any help anyone can provide here.
Glenn

Hi Glenn,
To have both the use of Internet and Internal available to your end-users, you first need to configure AAM setting. Open Central Administration > Application Management > Configure alternate access mappings. Let's say there is an existing web application
named http://sharepoint and my end-users from local network are able to access it using the URL http://sharepoint (root site collection). Here you need to add the Internet URL by select the web application and click Edit Public URLs. Add the Internet domain
to the web application, e.g http://sharepoint.abc.com. You don't necessarily have to edit binding setting in IIS. Before continuing next steps, make sure you are able to access http://sharepoint.abc.com from the Internet while being able to access http://sharepoint
from local network (aka Internal).
On the machine where Office Web App (OWA) Server 2013 is installed, open PowerShell to add OWA module and use the following command to re-create a new OWA server farm if you've completed configuring it previously.
New-OfficeWebAppsFarm -InternalUrl "http://owa" -ExternalUrl "http://owa.abc.com" -EditingEnabled.
In this case, I'm not using SSL certificate to encrypt data over the Internet. You can use Internet-public IP of the OWA server like -ExternalUrl "http://198.xxx.xxx.xx". Add CertifcateName parameter if you want to use whether CA-issued certificate
or self-signed certificate.
On your SharePoint machine, you need to re-bind all WFE machines to WAC farm using the cmdlet New-SPWOPIBinding. Next, you need to set the WOPI zone for both internal and external.
Set-SPWOPIZone -zone "external-http"
Note: I'm not all using certificate in my guidance. But the steps to have it configured is just to add more parameter.
I've recently successfully deployed OWA multi-server farm for both internal and internet uses for two big clients. In real-world scenario, ideally OWA should be published through firewall (Forefront UAG, TMG, F5...etc). Please let me know if you still have
issues after following my steps. My email: [email protected]
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

One WLC for Headquarter and Remote Site

Hi
I have a question about the WLC remote deployment.
We have the following design at the moment:
Headquarter
- Network 192.168.49.0 /24
- WLC 4402 Version 4.2.61.0
-- 3 x LAP1252
-- Layer 3 LWAPP
-- SSID wep
-- SSID wpa
- Windows PDC with Active Directory, DHCP Server and local Data Storage
- ACS Version 3.2 for TACACS and RADIUS authentication --> External DB to Active Directory
Remote Site
- Network 192.168.50.0 /24
- 2 x LAP1252
-- SSID wep
-- SSID wpa
- Windows PDC with Active Directory, DHCP Server and local Data Storage
- ACS Version 3.2 for TACACS and RADIUS authentication --> External DB to Active Directory
Connection between Headquarter and Remote Site
- 2 Mbit ADSL
The problem is, that the wireless clients on the remote site get an ip address out of the headquarter DHCP Range 192.168.49.0 /24. The users on the remote site
most of the time only use the local data server in the remote office. With the actual design the hole traffic is switched over the 2 Mbit ADSL connection the the
WLC in the headquarter and back to the remote site. That works but it is not that performant.
The problem could be solved with HREAP, but what I think is, that it is not possible to have the same SSID at headquarter and remote site with different VLANs.
How can I achieve, that the clients on the remote site connect to the same SSID (wep or wpa), get an ip address from the remote site DHCP server (192.168.50.0)
and the traffic is switched localy.
I hope you understand what the problem is.
Thanks in advance for your help!

Yes, putting the remote AP's in HREAP mode will allow the same WLANs to be available on the AP's but the traffic would be locally switched at the AP instead of being tunneled back to the controller. After you put the AP in HREAP mode you then would configure which VLAN you want traffic for each WLAN to be dumped onto for that AP.

10.4.7 update and external firewire problems with HD corrupion

Dear all,
Advised by Jpfresno I started this new topic about Tiger 10.4.7 update.
I will repeat my post and what was happening 2 weeks ago:
“In 5 years 10.4.7 update was a tragedy for my Powerbook Ti 667. When I update from 10.4.6 to 10.4.7 my 300 GB firewire drive gets corrupted, after repairing it with DiskWarrior and after connecting it to my PowerBook my computer freezes and I must shut it down via powerbutton. Safari also crashes after the update.
I just erase my Hard Drive and after that install 10.4 and update with combo to 10.4.7. But I had the same problems: finder freezes with connected firewire devices and also safari when browsing. I spend a week trying to solve the problem but no luck.
Yesterday and with no firewire devices, 10.4.7 freeze and I have big trouble in order to started my powerbook!!! Even when i insert the 10.4 install DVD it did not detected my HD. Finally I get it to work and install 10.4 and combo update to 10.4.6 and everything works. My external firewire drive and safari. I already diagnose my HD with disk utility, TechTool and directories with Diskwarrior and everything is ok.
I clone my 10.4.6 to firewire, boot from it and everything is working. I let my external drive connected and finder does not freeze.
My conclusion is that the problem is 10.4.7 update. It only give me problems and I was getting crazy with it. 10.4.6 is working good and I do not advice anyone to update to 10.4.7.”
Last week after reinstalling 10.4.6 I started to have HD problems with my Powerbook 667. I did a surface scan with TechTool I it reported bad sector. Then I done a zero disk format but after a second surface scan TechTool also reported bad sector. Then I take the decision to replace my internal HD. I bought a Samsung 40GB Hard Drive and installed it on my PowerBook. Then I have done a clean installation of 10.4.6 with all applications that I need and clone it to my hard drive with Intego Personal Backup software. Everything works on 10.4.6. and external firewire drive.
After that everything is ok. But I decided to test if my problem derivates from 10.4.7 update or from previous HD corruption. Then I install 10.4.7 update on my Internal Hard Drive. Everything is working good but after connecting my external Hard Drive the finder started to freeze!!!!!!!!!. After that I tried cloning HD to external firewire with Intego personal Backup. Everything was working good but when it was finishing the backup process started to give errors!! I started panic. I interrupted the backup process but after and after restart I found something strange with 10.4.7. The system started up, I login but I could not started any application!!!??? All my application died!
Then I have done one more clean installation of tiger and 10.4.6 update.
My conclusions are that the 10.4.7 update causes all the problems that I have on my PowerBook, because I used the same methods and same software/hardware on 10.4.6 and did no have any problem.
This last two weeks were very difficult to me. I tough that these problems do not happen with Apple computers but I was wrong!!! It is very hard to me to deal with it. I always said to my friends that I never had problems with Apple computers. I accept that a hard drive died because the use of it but I can not accept that a system update cause me 2 weeks of hard problems and make me loose precious work information! I always love apple computers and Apple OS but now I am disappointed
If anyone can explain what happen or have a solution for those problems?
Thanks for the comprehension and collaboration.
Best Regards
Mac OS X (10.4.6)

Hi, alsvieira.
There are some things you did not check in all of your troubleshooting:
1. Run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.
2. re: FireWire troubleshooting: Here is some general troubleshooting advice that may help if problems return with your FireWire drive:1. Review the AppleCare Knowledge Base document "What to do if your computer won't recognize a FireWire device".
2. If this problem occurred after installing a recent Mac OS X Update, and you are also unable to mount CDs, DVDs, or disk images perform the steps in this Mac OS X Hints article. This worked under Panther and may also work in certain situations under Tiger.
3. Power-on the FireWire drive before starting up (booting) your Mac.
4. Reset PRAM and NVRAM.
5. Resett the power-management chip in your Mac.
6. Try a different FireWire port. James Wiebe, CEO of WiebeTech, has published FireWire Port Failures in Host Computers and Peripheral Devices, a white paper providing backgroud information and technical analysis concerning the causes of failure for FireWire ports. This may provide additional diagnostic information.
7. Micromat TechTool Pro version 4 can test the FireWire bus in your computer: this tests the bus — not the ports — but if the problem is on the FireWire bus on the logic board, it should reveal it.
8. Check with the manufacturer of your FireWire drive or enclosure to see if any firware updates are available for such.
9. Hopefully, the partition map on the FireWire drive is not damaged. This can happen if the FireWire drive was not Ejected before being disconnected or powered off. If it still refuses to mount, you may need to employ data recovery tools or services: see my "Data Recovery" FAQ.Note that some of the information above is from the "FireWire Problems" chapter of my book, Troubleshooting Mac® OS X.
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Dynamic link to an external site?

Hi There
Has anyone any ideas where I'm going wrong here, it seems like it should be easy to me but all the settings I've tried don't make any difference.
I'm using Dreamweaver CS3 on Mac running Snow Leopard and I've set up a phpMyAdmin database.
One of the database fields called 'website' contains a list of stockists website addresses. I want to have a dynamic text link that opens up the stockists website in a new window when the text is clicked. So I'm doing this...
<a href="<?php echo $row_recordset1['website']; ?>">CLICK HERE</a>
This opens up a new window but instead of forwarding to the chosen website e.g. www.external.com
It keeps my existing website url at the front of the link so I'm getting something like...
http://www.mysite.com/www.external.com
Anybody any ideas how I can tell the link to lose the bit at the front?
Many Thanks

Hi
Thanks a lot for your reply, I wanted to open the external site in a new window and hence I have the following path as my URL
javascript:window.open('http://#COL09#','name','height=400,width=800');
This opens the oracle site in a new window , but at the same time my apex browser renders a blank page with [object Window] printed on the browser window.
Can you please tell me what is happening.
Thanks.

Track No. of times link to external site is clicked on a page

Question:
Our client strongly promotes another business on their site with a large button to click through to that business' url, which then opens in a new window. Is there any way in the reporting section of BC that our client can prove how many times visitors have clicked this link? i.e. a way that they can show how frequently referrals have come from them?
This kind of link click through tracking is obviously possible in eNewsletters - but what about on actual webpages?
Answer:
One way you could do it is by utilising the ad rotator module.
You can add the html to it then add the module code to your page and it will report on total impressions and click throughs to the link specified.
Then you can also have data on the conversion rate.
Another way would be to send your visitor to a page on your site that is redirected to the external site automatically. That way you can still track it.

Hi Mario
Just found your post after posting a similar / related question (mine has to do with tracking click-throughs from within a secure zone)
Am interested in your statement
'Another way would be to send your visitor to a page on your site that is redirected to the external site automatically. That way you can still track it'
Could you explain exactly how to track using page-redirects?
Many thanks
Maggie

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.

InlineFrame and external site

Similar Messages

Maybe you are looking for