Input "(ALL_MEMBERS)" has an invalid format

Hello Fellow Coders,
I am using BOBJ Design Studio version 1.3 and am facing a very weird error when executing my application. I have three cascading drop down filters in my application for STATE, CITY and LOCATION. Based on my state selection, only relevant Cities belonging to that state is populated in the drop down. Same is the case with LOCATION drop down which gets populated based on CITY selection.
The issue that I am facing is when I don't select anything for CITY, system sends ALL_MEMBERS as the filter criteria. Eventhough my end result is correct, I get this error message Input "(ALL_MEMBERS)" for Ship To City Code has an invalid format. In my code, I am sending blank for the filter values but it is still giving issue. Has anyone ever came across this issue and would like to share it with me? I do really appreciate y'all's input.
Please see the attached screenshot

Hi Raj,
Showing your original script will help us to get clarified with this issue ,
to be generic When you select your STATE dropdown, the corresponding cities gets populated
in the CITY dropdown, when you select CITY, the corresponding LOCATION.
The problem arises when you skip the CITY dropdown selection , but you have populated the location with the city selection .
One thing which may help is call CITY dropdown Onselect event at the event of STATE dropdown selection so that it selects the default value.
If you have already done all this, Kindly ignore and try to post the exact script which you have used.
Thanks
karthik Swaminathan

Similar Messages

Tp profile has an invalid format

Hello
I run report RSTPTEST and recive messages:
Profile               Cannot read tp profile
Version               tp profile has an invalid format
DB Connect            Link to database failed
Offline Call          error in transportprofil (param missin.
is there any idea?

Hello Denis
Download from SAP Service Marketplace, alias /patches the latest
TP and R3trans programs (see note 19466) for your release.
Please also check that you are using sapevt compatible with your
kernel
You must also ensure that background job RDDIMPDP is scheduled in
the source and target systems.
Thanks
Kenny

File has an Invalid format (Error no 11)

I get a file has an Invalid format (Error no 11) message when opening a text file in Diadem 11, is there any specifics you can add to the error # 11 message, to help me resolve the error.

Hi Atlas56,
How were you loading the ASCII file into DIAdem? Using a posted DataPlugin from the web? Using a DataPlugin from a colleague? Using the ASCII DataPlugin Wizard in DIAdem? Using the ASCII Import Wizard in DIAdem? Copying and pasting values into a VIEW table?
I'm not familiar with that error message,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Error ' MEX2 USD has an invalid format' in FM 'AC_DOCUMENT_DIRECT_INPUT'

Hi Friends,
I see the error 'MEX2 USD has an invalid format' in FM 'AC_DOCUMENT_DIRECT_INPUT'.Do you guys have any idea as to why has this error occured.Please let me know.
Is this a config issue ?

can you check the currency key which your passing ..

The OCR backend has an invalid format) in OCR initialization

All,
I am getting this message
2008-04-28 12:45:29.909: [ default][1]prifcgini: clsd LOG initialized
2008-04-28 12:45:29.909: [ default][1] prifcgini: LEM initialized
2008-04-28 12:45:29.911: [ default][1]prifcglms - DONE
2008-04-28 12:45:29.931: [ OCRRAW][1]propriogid:1: INVALID FORMAT
2008-04-28 12:45:29.933: [ OCRRAW][1]ibctx:1:ERROR: INVALID FORMAT
2008-04-28 12:45:29.934: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2008-04-28 12:45:29.934: [ default][1]a_init:7!: Backend init unsuccessful : [22]
2008-04-28 12:45:29.934: [ CSSCLNT][1]clsssinit: error(22 PROC-22: The OCR backend has an invalid format) in OCR initialization
2008-04-28 12:45:29.934: [ default][1]prifcginitclss: clsssinit failed. rc = 21
2008-04-28 12:45:29.934: [ default][1]prifcgterm: Cleaning – DONE
Can someone give me some pointer on how to debug this.
thanks in advance
PK

PK,
One issue that we ran into and saw similar error messages was when a whole unpartitioned device was presented to CRS to be used as the OCR and the
Voting Disk ( i.e., /dev/sdb , /dev/sdc instead of a partition like /dev/sdb1 , /dev/sdc1 } .
It appears that CRS calls a utility to format the disks which does not like the whole unpartitioned devices . Guess this is fixed in the 11g release.
We ran into this issue when running root.sh , so I am not exactly sure the circumstances under which you are facing these errors. If this is a fresh install and the devices have not been partitioned , then it might be worth trying to partition them and presenting them to CRS.
You might have to cleanup the existing install if you decide to pursue the above option . Note:239998.1 on Metalink might help you with the cleanup steps.
Vishwa

Getting "... file has and invalid format. (Error no. 11)" when importing .tdms file into DIAdem 11

I developed a script for processing .tdms files in DIAdem 11.1, now I'm deploying the script on the very PXI system that created the .tdms files. This system had DIAdem 11.0, but when I try to open (DataFileLoadSel) the tdms file in my script I get the error message:
"D:\MyFileName.tdms" has an invalid fiel format. (Error no. 11)
The tdms files are created by a LabView application.
If I delete the correspondin .tdms index file, I get a little further, it loads the first two of four groups, using DataFileLoadSel on the first group, and DataFileLoadRed on the 2nd group, on third group, another DataFileLoadRed, I get the following error:
Error in <MyScript> (Line: x, Column: y):
Cannot load the file "D:\MyFileName.tdms" with the loader "TDMS"
Further information:
Cannot open the file "D:\MyFileName.tdms".
Is there a difference between DIAdem 11.0 and 11.1 that affects the import of .tdms files, if so, can I get around it?
Thanks,
Eric
Solved!
Go to Solution.

Hello eberg,
Before we go into more detailed error trapping, could you please try to install the TDMS 2.0 format on the DIAdem 11.0 computer (DIAdem 11.1 and LabVIEW 2009 come with the TDMS 2.0 stuff already installed).
Please get the download here: http://zone.ni.com/devzone/cda/tut/p/id/9995
Once installed, please try running the Scripts again (in DIAdem 11.0) and let us know if that fixed the issue. It might not help to install this, but it's a quick thing to try before we dig deeper into the issue.
Best regards,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Problem with partion resulting in "One of the source volumes specified has an invalid format and cannot be protected using Windows Backup. Only volumes formatted with NTFS/ReFS can be protected."

We have two new Windows Servers 2012 R2 that I'm trying to set backups on using a script. When I used the -allCritical switch, I get the error specified in the subject. When I look at the partition information using diskpart, I see a 2048 MB partition with
no drive letter labeled as System that is FAT32. I was never prompted to my recollection of what file system to format the partition with. Is it safe to assign this partition a letter, convert to NTFS, and then remove the drive letter?
Thanks

I did. I assigned the drive a letter and ran CONVERT [drive letter]:
/FS. I was really worried during the reboot, but it came up OK, and after it was back online, I removed the drive letter.

PRCT-1302 : The "OCR," has an invalid IP address format

Dear RAC experts,
I am setting up RAC nodes and during installation it fails with error PRCT-1302.
PRCT-01302: The "{0}" has an invalid IP address format
Cause: The format of the subnet number and/or the subnet mask is an invalid IP address format.
Action: Make sure that both the subnet number and the subnet mask have a valid IP address format.
It seems like everything OK with subnet.
public network
eth0
         Mask:255.255.255.192 / 26
private interconnect
eth1   Mask:255.255.255.240 / 28
private interconnect
eth2
        Mask:255.255.255.240 / 28
Please advice.
Thanks in advance.
RAC 2node
Linux
VMware
IBM

Hey ioannis,
So I would recommend starting from scratch on this one and seeing if we can get things to work. I would recommend following these steps:
Make sure that you have access to port 80, which is what LabVIEW and the Web Server uses for communication. This might mean turning off virus checkers or firewalls, as Altenbach suggested.
Restart your computer. This is to make sure that there isn't anything already accessing this port that is conflicting.
Start LabVIEW once the computer is back up.
Open the VI that you would like to publish. I might recommend using an Example just to test, but you could use your program.
Select Tools » Web Publishing Tool (WPT).
On the bottom of the WPT window, press the Start Web Server button.
Configure your VI as you would like. You can probably just use the defaults for now.
Select Save to Disk and replace the file if necessary.
Hightlight the address that comes up in the Document URL window and press Ctrl+C to copy it.
Open Internet Explorer and past the URL into the address bar on the development computer.
These steps should be all that is necessary to use the WPT, so please follow them and let me know if they help or not.
Thanks!
Andy F.
Message Edited by Andy F. on 03-17-2006 12:41 PM
National Instruments

Digital adapter and invalid format with Sony bravia tv

I recently purchased an iPad 2 and the digital adapter so I can play what's on my ipad2 on the tv. I have a 26' Sony Bravia tv model kdl-26m4000 and when I hook up the iPad with the digital adapter with a hdmi cable the tv says "invalid format". I somehow got it to work once but I can't get it to work again. I tried the adapter on another Sony Bravia tv that is 52' and it connects without a problem. I also used it on another Sony tv while on vacation without a problem. Does anyone know why I can't get it to work on my tv. The 52' Sony Bravia tv that it works on is older then my tv so I'm not sure what the problem is. I took the digitl adapter cable back to apple to get a new one and it still doesn't work.
Any help would be greatly appreciated.

Dsaamgel24-
The mention of VGA was to give you something to look for. It is not likely that an HDMI port would have that problem!
For purposes of troubleshooting, you might try swapping the HDMI ports. If both ports work the same with both the iPad and the Blu-Ray, then there is probably nothing you can do to make the iPad work with that TV's HDMI.
Does that TV have any other video inputs? Apple also has adapters for VGA, Composite and Component Video. They will not have as high a video quality, but may work.
Fred

Hdmi invalid format

Hi
yesterday for the 1st time I tried to connect my MBP 15" Retina Display to a Sony TV Bravia KDL-26M 4000 through HDMI but it didn't work. I got a 1st messages "Invalid Format" and after NO signal on TV and the computer monitor became black.
Today I went to visit a Genius at the Apple Store and as soon as he connected the computer to a TV, with the same cable, it worked... Just plug'n'play.
I came home I tried again:
1.- I connected the HDMI cable with TV Off
2.- I connected the HDMI cable with TV On
3.- I disconnected the power cable of the TV and I waited 30"/45" and reconnected
4.- I turned Off and On the computer
5.- I plugged In and Out severals time the HDMI cable, and I tried the 2 different ports
6.- I even tried to change the resolution on the computer but on the MBP Retina Display you can't do to much
7.- an many more
but NO success, still got the messages "Invalid Format"...
I'd like to add that the other devices connected to the same HDMI ports on that TV are working, means the TV is working
some help will be appreciate
thanks
alberto
MacBook Pro, Mac OS X (10.7.5)
Message was edited by: drzoom

theres no reason why it should not work, plug in the HDMI cable, select the Source input on LCD(HDMI 1/2), if still no picture on the Mini open System Pref>Display : Resolution> it should show 480p, 720p, 1080i, 1080p and other lower resolutions, just select 1080p and to your right select 60hz. Hope this helps.

External Monitor on MBP (Invalid format error)

I searched the forums and couldn't find a similar issue so here goes. I have a late 2008 MBP with Snow Leopard connected to a Vizio(MODEL#VM230XVT)LCD 1080P HDTV. I'm trying to use this in "closed lid" mode and using Apple Bluetooth mouse/KB. Because, I didn't want to buy another HDMI cable I currently have it connected via VGA with Apple adapter (DVI>VGA) and a separate audio cable running to TV I have the Bluetooth settings set to wake the device. when I shut the lid the screen goes black either states "No Signal" or "Invalid Format". I have to disconnect the external monitor in order to see the MBP screen again I have tried using several different types of Resolution without success. I notice under the resolution settings it has a "useable screen size underneath it with certain dimensions" so if I set my MBP to max resolution I believe 1400x900 (guesstimate) and set my HDTV to 1920x1080 I think underneath the resolution box I get the "useable screen dimensions which are usually the laptops screen dimension" not sure if this plays apart in anything just wanted to mention it. The TV will display if I leave the lid open on the MBP and have a resolution that exceeds 1024x768 so I'm not sure why it won't display with lid closed as well. Any suggestions would be appreciated.

Then I'd…
1) Try reinstalling WoW and try to keep as few preference/game files as you can. Granted you need to keep your character and game play files etc etc so just backup the lot and restore as required.
2) Contact Blizzard and check their forums and see if they know anything about this.

Invalid Format

I am trying to connect my G4 FW with Radeon 9700pro to a 26" HD TV.
The TV has PC (VGA) slot and I have tried connecting from DVI to VGA adapter from G4 to VGA port on TV. This results in a black screen after the apple screen. The TV tells me there is an Invalid Format.
I am guessing the resolution and refresh details in preferences are incorrect, however if I connect a spare monitor, set up the display, connect to TV, it works fine. Until I do a restart. Then I get the Invalid Format again.
Would it be worth opting for a DVI to HDMI cable or would it give me the same results?
Is there anyone out there that can advise?
Thanks

Hi-
You can get a DVI-D to HDMI cable. That will eliminate the adapter, making a cleaner, more trouble free connection.
The 9700 has DVI-I, but the DVI-D will connect just fine.
The DVI-I has integrated analog with the digital, and the DVI-D only takes the digital.
Analog is of no use with a digital monitor/TV.

Ipad 2 says invalid format- sony bravia 32"

Help! Just got an ipad 2. Tried to connect to my Sony Bravia 32" tv with av adapter from apple. I plug it in, and it says "invalid format". I have setup the tv for HDMI input, blah blah, I've tried so many things. I have contacted Apple, Best Buy, Geek Squad, and Sony. Apparantly there are not any professionals out there that can figure this out. Who ever can solve this, I will pay! Please help! And after you have helped, please send address of where I can send check.
Thank you!!!!!

I just talked to someone at apple...first we made sure my ipad video settings were for widescreen off nd signal NTSC, which were correct. Checked connections, checked with an alternate cable, no go. He would have liked to try another TV with HDMI but we have only one.
So the running theory is that it's a faulty AV cable. He tried to set up an exchange by mail but was unsuccessful, so the plan is to exchange it at an apple store.
I'll try to remember to updtate this with the results!

Sony Bravia 26" "Invalid Format"

When I first hooked my Mac Mini To the Sony Bravia, using the DVI adapter, it worked OK, but when I increased the resolution I get an Invalid Format message, and I can't change it back. I have tried going back and forth, from the Bravia to my Apple display. No matter what I change the Resolution to on my Apple display, when I go back to the Bravia I get the same message.

Welcome to Apple Discussions!
I suspect the reason your Bravia continues to remain blank despite you tweaking settings when using your Apple display is that the mini is 'remembering' the Bravia and the settings used with it, so reverting to those each time the system boots with it connected.
You could try several things at this point:
1: With the mini connected to the Bravia, boot into safe mode by holding the shift key down during startup. Safe mode may result in the system reverting to a basic resolution, allowing a display on the Bravia, which you can then reset to something you know worked before with it.
2: Boot with the mini connected to the Apple display, then without powering down, disconnect that and connect the Bravia.
3: Boot with no display connected, and wait until sufficient time has passed that you would normally be seeing the desktop, then connect the Bravia. This sometimes forces the system to boot into ultra-low res mode, which may remain after the Bravia is connected, allowing you to reset to a known-good resolution and refresh rate.
4: Boot with the system connected to the Apple display, and then search for file names containing 'windowserver' (no quotes) using the Finder's Find command in the file menu. Depending on which version of MacOS you're using, you may need to set the 'Kind' to 'system files' and then switch 'don't include' to 'include' instead. Drag all instances of windowserver files which end in '.plist' to the trash and then reboot (there may be 1, 2 3, or even 4 such files). These files contain display settings preferences, so will force the system to forget the Bravia. When booting again, it will create new ones but more importantly, since it will no longer remember the Bravia's settings you used, it should give you a working display.

Urgent! The field jnlp codebase has an invalid value: $$codebase

Hello All,
1. I am trying to run a java web start application, i am using tomcat 5.5.20 server. I am using the JnlpDownloadServlet to use the $$codebase and $$name to dynimically code the path to the jar's and the jnlp file.
Here is what i have done:
Here i have a JnlpDownloadServlet in a seperate folder called (D:/apache-tomcat-5.5.20/webapps/online/server1/WEB-INF/lib/jnlp-servlet.jar).
2. Now i am placing my .jnlp and my application jar's in a seperate folder called *"client1"* (D:/apache-tomcat-5.5.20/webapps/online/client1/)
I need to have the client1 and server1 folders and i have to map the servlet to the jnlp file, because i want to keep my jars's and the servlet in a seperate folders.
3. I have the web.xml file in WEB-INF folder.
4. web.xml:
<?xml version="1.0" encoding="UTF-8"?>
<web-app>
<servlet>
<servlet-name> JnlpDownloadServlet</servlet-name>
<servlet-class>jnlp.sample.servlet.JnlpDownloadServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
*<url-pattern>../client1/*.jnlp</url-pattern>* **
</servlet-mapping>
</web-app>
Myapp.jnlp:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0+"
codebase="$$codebase"
href="$$name">
<information>
</information>
<resources>
<j2se version="1.6+"/>
<jar href="$$codebase/XXXXXX.jar" main="true" download="eager"/>
     <jar href="$$codebase/XXXX.jar" download="eager"/>
     <jar href="$$codebase/XXXXX.jar" download="eager"/>
<nativelib href="$$codebase/XXX.jar" />
</resources>
</jnlp>
While i run the application. i get the following error:
Error occured when trying to run a Java web start application
BadFieldException[ The field <jnlp>codebase has an invalid value: $$codebase,$$codebase]
     at com.sun.javaws.jnl.XMLUtils.getAttributeURL(Unknown Source)
     at com.sun.javaws.jnl.XMLUtils.getAttributeURL(Unknown Source)
     at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
     at com.sun.javaws.Main.launchApp(Unknown Source)
     at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
     at com.sun.javaws.Main$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

yes. I am sure.
The JnlpDownloadServlet takes the URL address we enter in the browser as codebase and the variable $$codebase is assigned the value which is taken dynamically.
From Developer's Guide:
Processing of JNLP files
The JnlpDownloadServlet will automatically macro-expand certain template values in a JNLP file and replace them with URLs that are specific to the current request. This will enable JNLP files to be written and deployed without containing hard-coded URLs.
Macro expansions
The servlet will automatically substitute certain fixed keys in the JNLP file (prefixed with $$) with URLs that are based on the current request. The keys are designed so location-independent WAR files can be created and deployed into a Web container.
The table below shows the 4 keys that the servlet will look for and substitute:
Pattern Value
$$codebase Complete URL for request, except name of JNLP file
     $$name Name of the JNLP file
$$context Base URL for the Web Archive
     $$site     Web site address without the WAR context portion
For example: Consider the example1 WAR file. Lets assume that it has been deployed at the following location: http://www.mytool.com/tool. Thus, a request to http://www.mytool.com/tool/app/launch.jnlp will return the JNLP file. The values of the macro-expanded keys would be:
$$codebase = http://www.mytool.com/tool/app/
$$name = launch.jnlp
$$context = http://www.mytool.com/tool/
$$site = http://www.mytool.com/
The servlet does not validate the format of the JNLP file nor that the XML is well-formed. The value substitution is purely textual.

Input "(ALL_MEMBERS)" has an invalid format

Similar Messages

Maybe you are looking for