Insane object error does not resolve upon re-load
http://digital.ni.com/public.nsf/allkb/AFA28DCC3DE89839862566B200594E8C
does not resolve this issue. Even when I close the VI & re-open it, I get the following error message:
I tried doing dozens of undo edits of the last 10 or 20 changes. None of them work. None of the suggested fixes work at all, either.
Worse yet, I can tell that my code is not what is looks like. It is not running the code that is on the diagram, it is running some previous version of the code.
Solved!
Go to Solution.
Attachments:
insane object error.PNG 12 KB
Hi Greg,
Thanks for your reply. It sounds like you've been on both ends of a serious error/crash resulting in code loss before.
As Murphy's Law would have it, it happened right before quitting time.
I decided to stick it out & make it a late night while I remembered most of my changes.
I quit & restarted LabVIEW, pulled the VI from a backup done the day before, opened up the backup version of the VI, opened up the bad code, and tried pasting changes in. However, I soon got oodles of "insane object" errors, and gave up on this route.
I quit & restarted LV, opened up the backed up VI, opened the bad new VI on a 2nd monitor (after configuring the display etc.), and manually re-drew (i.e., "re-wrote") all my code just by inspection.
This worked. (To play it safe, I also forced a system backup before going home, and saved lots of revs. along the way during my edits.)
I rarely have experienced "insane object" errors in my 10+ years of LabVIEW programming. Therefore, I have used little of other languages the past 10 years, and have developed so much re-usable code that I know well, I don't want to move away from it. It is quite unsettling / scary when it happens, especially on a large program. It makes me consider going back to text-based programming, where at least there's some inspection of all but the most messed up files (vim/binary mode, for example).
Anyway, I am on my way now, but will be even more diligent about "Save As" to save interim versions during long code writing sessions.
Also, I ran chkdsk per Apps Engr suggestion on a ticket I did later open after doing this post.
Thanks, Matt
Similar Messages
-
Error: Number range for object RESB does not exist
Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
Message no. 61501
Diagnosis
The system cannot create a document for an MRP element if no number
range or interval has been maintained in Customizing of MRP or if t
number range you have maintained is not allowed.
Below is a list of MRP elements that are affected:
Number range object MRP element
PLAF planned order (operative oder simulative)
EBAN purchase requisition
RESB dependent requirements
MDSM simulative dependent reqmts (long-term plannin
MDTB MRP list
Procedure
Check the number ranges in Customizing. If you do not have the necessa
authorization, please get in touch with your systems administration.Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object MRES/DREQ
No. From Number To Number Curr Number Ext
01 0000000001 8999999999 380 blank
02 9000000000 9500000000 blank checked
RB 9500000001 9999999999 blank checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM -
Error: Object "Dot11BandSelect" does not exist.
Has anyone else received Error:Object "Dot11BandSelect" does not exist. when configuring the 802.11 settings on a 4400 WLC runing ver. 6.0.196.0
If so what did you do to resolve it.
Thanks
Barry6.0.196.0 is a deferred code.
http://www.cisco.com/web/software/Wireless/Deferral/Software_Advisory_6_0_196_0.html
Are the global band select enabled, are you getting this error when enabling bandselect on a WLAN's advanced tab. -
Insane object error(The string control not getting any values)
In LabVIEW 8.2 i am using the string control to get the text from the users, and initially there was no problem at the time of development it works perfectly, after building the installer,
these string controls are not getting any string input, it seems like a disabled one, but actually it was not disabled, when we try to click over that through the mouse,
that text inputting cursor was not blinking over there,I screen looks as below, some error messages are thrown from the LabVIEW like insane object error, even
now there was the same problem in the source code itself, what to do rectify this. Only this part generates error all other remaining screen panels are working perfectly.This kind of problem can be a pain to locate. This often occurs when the wiring to or from a control or indicator is bery long, convoluted and hidden inside of structures or behind things. So first, you need to identify which VI specifically is generating the error by individually saving VIs and subVIs until you find the one that is generating the error. Now try and remember the last time that VI saved without a problem and what edits you made since then. Places where I have had this occur was when I drag-copied a control and a couple VIs into a small structure. Sometimes the wires would seem to conect up properly, but when I tried to save the VI I got this error. The solution was to disconnect all the wires associated with the VIs I had copied and rewire them.
Also, can you post the VI that is doing it? Shouldn't need the subVIs for this...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W. -
The message says: "Error: 'setTimeout' called on an object that does not implement interface Windows" Multiple message windows for this get open. And there is an OK button under it. I have to click on OK button on all the windows to be able to continue with working on the browser again.
hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
Error: Could not resolve s:SolidColor to a component implementation
So I have a library project and in that project I have a CustomDataGridBackgroundSkin file which is as follows:
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
minWidth="25" minHeight="25">
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<!-- layer 4: fill highlight -->
<s:Rect left="0" right="0" top="0" height="100%" >
<s:fill>
<spark:SolidColor color="0x968f89" alpha="1" />
</s:fill>
</s:Rect>
</s:SparkSkin>
I am simply trying to get an ant task to compile this library to SWC, but I am getting a " Error: Could not resolve <s:SolidColor> to a component implementation" error during compile. The only way to fix it is to add these lines of code (bold).
<?xml version="1.0" encoding="utf-8"?>
<s:SparkSkin xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:spark="mx.graphics.*"
minWidth="25" minHeight="25">
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<!-- layer 4: fill highlight -->
<s:Rect left="0" right="0" top="0" height="100%" >
<s:fill>
<spark:SolidColor color="0x968f89" alpha="1" />
</s:fill>
</s:Rect>
</s:SparkSkin>
I can also get this error to go away if I put this line in my build.xml file: "<include-sources dir="${src.dir}" includes="*"/>"
But then I get this error => "[compc] Error: Unsupported file type: C:\dev_projects\features\flex4version\web\OneVoice\src\components.xml"
components.xml is my manifest file.
Anyone know what the issue is? Why would I need the xmlns:spark="mx.graphics.*" namespace when I have xmlns:s="library://ns.adobe.com/flex/spark"?Curious. Which version of the Flex SDK are you using?
Does this work if you try in a brand new project using Flex 4.1 or Flex Hero?
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<s:controlBarContent>
<s:Button label="goto s1" click="currentState = 's1';" />
<s:Button label="goto s2" click="currentState = 's2';" />
<s:Button id="sdkVer" initialize="sdkVer.label = mx_internal::VERSION;" click="System.setClipboard(sdkVer.label);" />
</s:controlBarContent>
<s:states>
<s:State name="s1" />
<s:State name="s2" />
</s:states>
<s:Rect left="30" right="20" top="20" bottom="30" >
<s:fill>
<s:SolidColor color="0x968f89" color.s2="haloOrange" alpha="1" />
</s:fill>
</s:Rect>
</s:Application>
Peter -
Error: Could not resolve s:states to a component implementation.
So I am trying to setup states on a Flex application I'm building, but it doesn't seem to want to compile. I get this error:
$ ./build.sh
Loading configuration file /Applications/Adobe Flash Builder 4/sdks/4.1.0/frameworks/flex-config.xml
uploader.mxml(24): Error: Could not resolve <s:states> to a component implementation.
<s:states>
Here is my build command nothing special ...
$ cat ./build.sh
#!/bin/bash
mxmlc -output bin/uploader.swf src/uploader.mxml
I have a class that extends the Spark application like so ...
package com.uploader.controllers
import spark.components.Application;
dynamic public class FlashUploader extends Application
Then in my main application mxml file I use it like so ...
<?xml version="1.0" encoding="utf-8"?>
<c:FlashUploader xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:v="com.uploader.view"
xmlns:c="com.uploader.controllers.*"
minWidth="709" minHeight="400"
skinClass="com.uploader.skins.UploaderApplicationSkin">
<fx:Style source="styles.css" />
<!-- states -->
<s:states>
<s:State name="default" />
<s:State name="startup" />
<s:State name="uploading" />
<s:State name="normal" />
</s:states>
</c:FlashUploader>
Now when I try to compile I get the states error. I've found several examples and even made a dummy app just using the spark application and it compiles fine. Not sure if I'm doing anything weird here but the few other flex devs I know don't seem to see anything wrong with what I'm doing that could cause this.When you define an object using a namespace you have to use the same namespace for its properties, so you will want to use "<c:states>" instead of "<s:states>" in this case.
-
Hi,
We are experiencing the following error when trying to retrieve data from the OLAP layer in our front-end:
ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
to be more specific, the following happens:
We are using the Oracle OLAP Java api's to query the analytical workspace. We create a Source object that contains the joins we want. This source is prepared and committed via the TransactionProvider class. Via the DataProvider we then create an SQLCursorManager and generate the SQL and execute it via JDBC.
We were able to execute it without problems on an XP development platform. When switching to another platform that we use, it gives the following error messages:
(platform with the error is Linux x86-64; more version info further down)
Caused by: java.sql.SQLException: ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
ORA-06512: at "SYS.OLAPIMPL_T", line 23
ORA-06512: at "SYS.OLAPIMPL_T", line 17
ORA-06512: at line 4
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:626)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:352)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:894)
at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:384)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:984)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
Platform/version info that produces the error:
Linux x86-64
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
OLAP A patch for 10.2.0.3 is applied.
Platform where this works without problems:
Windows XP
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Any info on resolving this issue is greatly appreciated!
Thanks,
EdHi Keith,
Yesterday I actually fully rebuilt/redeployed the AW. (I only patched our 10.2.0.3 installation with the OLAP A patch very recently.) Even the AW's tablespace was recreated, just to make sure everything was gone. Redeployment of the OLAP objects from OWB control center went without any problems.
Let me answer your questions one by one below.
1) How did you build the AW?
We use OWB. The only thing I used AWM for is to actually create the AW. Once created, I use OWB to design and deploy. The front-end developers use AWM sometimes for viewing data in the OLAP objects. (I use OWB or AWM for that.)
2) Can you connect to the AW via AWM, if so can you use the Data Viewer option to view:
a) each dimension and check you can drill up and down.
b) each cube
I have been playing around a bit with the dim's and cubes in the AWM by right-clicking and selecting view data ... (that's the data viewer option?) and encountered no problems.
3) You are using the OLAP API directly, what sort of application are you building - Java Client, JSP, Applet and are you using BI Beans?
We are building a JSP type application, but so far only servlet code is being executed as the failure occurs on issuing the query. We are not using BI BEans.
Thanks for your feedback!
grts,
Ed -
E-Recruiting - Synchronization object u2018BPu2019 does not exist in customizing
e-Recruiting Question: Version 6 u2013 patch 10
The following error is presented when new eRec users are created or new external users are created.
Synchronization object u2018BPu2019 does not exist in customizing
I have concern that customizing table CRMC_BUT_CALL_FU is not properly maintained as it initially dumped on creation, but after an update to the table the dump is resolved but I still receive the error.
Any hints or example of the configuration in this table for a working e-Recruiting system?
Regards-
bUpdate:
After a lot of digging, we discovered that the JDO mapping is creating a lower bound with a one that should be a zero on the relationship... A forum suggested that adding cascade-delete will force the zero with no foreign key constraints... -
Object EXTERNAL_TABLE does not exist???
I've written the following function that references an external table within the same schema. When I try to execute the function, it returns an error that "object EXTERNAL_TABLE does not exist"
I've also tried creating a view that points to the external table and then pointing this function at the view but I still get the same error.
Any ideas on how to make this work? Thanks in advance!
CREATE OR REPLACE
FUNCTION ugaps.get_can
p_string_value IN VARCHAR2
RETURN VARCHAR2
IS
can_value VARCHAR2(9);
BEGIN
SELECT CC_ENT_CAN
INTO can_value
FROM CAN_SSN_CONVERTED
WHERE CC_ENT_PRIMARY_ID=p_string_value;
RETURN can_value;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN '810XXXXXX';
WHEN OTHERS THEN
RETURN 'ERROR-->' || SQLERRM;
END;
/I removed the "WHEN OTHERS" clause per your suggestion. Now I'm getting this:
ORA-06564: object EXTERNAL_TABLE does not exist
ORA-06512: at "UGAPS.GET_CAN", line 9
06564. 00000 - "object %s does not exist"
*Cause: The named object could not be found. Either it does not exist
or you do not have permission to access it.
*Action: Create the object or get permission to access it.
The database is Oracle 11.1.0.7 for Windows 2008
The external table, function, and execution of that function are all within the same schema, which has DBA privileges, so I should have permissions. If I run the "SELECT" statement alone, it works properly.
Edited by: markr3 on Feb 19, 2010 2:48 PM -
Text ID for text object MATERIAL does not exist - MM01
Hi All,
I am getting below error message when trying to save Material Master in MM01.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
I have searched the forums but couldn't get relevant message.
Please assist.
Thanks,
RajHi Jurgen,
This is the complete message i am getting.
Text ID for text object MATERIAL does not exist
Message no. TD603
Diagnosis
You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
Procedure
You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
If I enter MM02 and without changing anything if i save still i get this error message.
Thanks & Regards,
Raj -
Text ID for text object BUT000 does not exist
Hi Experts.
I am doing data migration using LSMW with IDoc. I have this error message "Text ID for text object BUT000 does not exist" when processing the IDoc.
Can anyone tell me what is this error about and how could i fix it. A step by step guide would be nice. Really need advice urgently.
I'll definitely rewards points.
Regards,
Juliannafor this u need to maintain the text object and its related text id using the TC: SM31 in rel. view of ur tcode( like MM01, Va01 etc).
first get the view names(1 for text object and 2 for text id) from fun. people.
then go to sm31 with 1 view, create BUT000 .
then go to sm31 with 2 view, maintain text id for the text object:BUT000. -
The data object "BSEG" does not have a component called "ZZREGION"
Hi Friends,
Getting ABAP runtime error while doing MIGO-Goods receipt .
The data object "BSEG" does not have a component called "ZZREGION".
Regards
Ashucheck/activate table bseg in se11
A. -
"The hostname does not resolve to any configured address..."
I think this is a stupid question But I just can't remember what I'm missing. It's been a while since I set one of these up.
I have just installed Lion and Server on a Mac Mini 2.66GHz C2D
I'm not trying to change the Open Directory settins from Standalone directory to an Open Directory Master.
When I do it saks me to create a directory adminstrator account. No problem. But when I hit continue on that screen I get a message saying:
"The hostname does not resolve to any configured address. Please ensure your hostname and network configuration is correct."
Now, I think this is because I haven't set up any DNS zones yet. But I'm not sure about that...
So can anyone(s) help me with these two things:
1. Is the Open Directory master I'm trying to set up dependent on setting up DNS first?
2. If so, can someone tell me what I'm supposed to do in the DNS, because for the life of me I can't remember anything about it.
I'll be very grateful for any help...
Thanks!
David.Hi again. Thanks for the help. So that clears up that mystery. However...
Ok, so as already noted, I've completely forgotten how I set this up last time, but I remember that I still have an archive of my old Snow Leopard server before I upgraded it to Lion.
So I've fired that up in Server Admin to see how I set up the DNS in that, and see if that can remind me how to set up the same on my new Lion server.
I believe I've set it all up correctly, but alas, I'm still getting the same error message when I try to create the open directory master. So I must be doing something wrong still. I just wish I knew what that was.
I've attached screen shots of my settings. If you or anyone else can tell me what I'm doing wrong, then again, I'd be grateful!
The routing is done by my Airport Extreme, with the .200 IP address being assigned by DHCP client ID. The IP address of this machine is in fact 10.0.1.200. These settings are exactly the same (with one exception) as my (working) Snow Leopard server and just to be clear I'm not trying to run both servers at once!
The one exception is this: The first line in the screen shot says "1.0.10.in-..." (from the non-working Lion server), whereas on my Snow Leopard server, the same line says "200.1.0.10.in-..." Everything else is the same. I can't seem to see any way of "correcting" that. Is that the cause of the problem? And if so, how do I fix it? If not, what *is* the problem?
Thanks!
David.
Maybe you are looking for
-
I installed the latest update to my phone. Half way through it asked to connect to itunes. After updateing it had some type of error and wanted me to restore the phone. After restoring, another error box popped up and said that it could not be res
-
I manually deleted several Time Machine backups from my external HDD. Whenever I attempt to empty trash, it states (error code -22) has occurred. How do I fix my predicament? I understand (now) that I should never do this and ONLY delete from the Tim
-
Guest two node Failover Cluster with SAS HBA and Windows 2012 R1
Hi all, i have two IBM x3560 brand new servers with V3700 IBM Storage. The Servers are connected to the storage through four SAS HBA adabters (two HBA's on each server). I want to create a two node guest Fileserver Failover Cluster. I can present the
-
Cursor disappears when writing text?
I have a frustrating problem in CS3 that when writing a block of text, either with text tool or area text tool, that the cursor disappears. I need to see its new position after using the space bar or tab: ready to input the next piece of text. It see
-
I will be traveling in the far east for several months and have been told I can use my phone but have to unlock it. Any ideas??