Insert Edit Mode

Yikes! I must have pressed a key-combo that got me into an insert edit mode (deletes next char right of cursor as it enters what you type).
Can't get out without a restart. Nothing in Prefs or Prefs>Shortcuts that I can see which mentions this, geewizz Adobe what gives?

I'm going to return this conversation to the first thread I started.
The commented line generates an exception btw. First two lines okay.
EDIT:
Will discuss on other thread:
AS) export single page PDFs from multi-artboards
END EDIT
Just realised that thread isn't mine so this thread will let me give credit where it's due
I'll link over to this one from that one if we get a result.
Yeah when I type "app.activeDocument.a" I do not get a prompt listing for artBoards. The Object Model Viewer is pretty useless IMHO. The description are like A: A is a property of alphabet. Cheers OMV!
Okay,
Document.artboards (Read Only) // lowercase 'a' coloured text didn't make it onto the forum post :\
Data Type: Artboards
Adobe Illustrator CS4 Type Library
All artboards in the document.
That works. Now for artboard range setting…

Similar Messages

Use master-detail as both insert-edit mode

Guys,
I am again in need for your expert suggestions....(I am using Jdev 11.1.1.3 and really new to adf world)
I need to implement a scenario where user will click the menu item and system should open a detail page in insert mode.
I have a page fragment for headers.... which has menu bars.... and one the of item in the menu bar is "Create new Record"
My application has master-detail page (master with multiple details). I would like (don't have to) to use the same master-detail for Insert and Edit
More detail scenario: 1. User will click "Create new Record" menu item
2. Load the master-detail page in insert mode
3. when they save the record, page should turn to edit mode...
any help is greatly appreciated......
Edited by: raj-acha on Sep 2, 2010 9:22 AM

I can use goMenuItem to open the master-detail page. Do you think any issue with this?
Also, Can i use the master-detail page for both Insert and Edit? if so, please suggest me possible solution. (I have master-detail page and only opens in edit mode)
-R

I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

pkg4ibm wrote:
editing a url on the graphic...
Not sure what you mean by that: is that URL in an image, or is it actual text?
If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

Remove insert replace delete options from abap editor in EDIT mode

hi ,
i am facing a strange problem. when i change to edit mode the code remains as display format and there are buttons in the toolbar to insert,delete, modify .
it puts a tag *{ insert
like this when i press insert button.
i want to do normal editing. How to ressolve it.
this is a Z-program and editor lock is unchecked.
please help me.

this is because you are trying to change a progarm that is not the orignal in that system, in which you are trying to make changes.
for such program Original system is different from the system in which you are trying to modify it. You can also check it from object directory entry.
To edit such type of program please follow the below procedure.
GOTO T-CODE SE03
Under the node *Object Directory choose change object directory entries and click on execute icon or double click on it.
now check the check box R3TR PROG and give the program name in the input area and click on execute icon
now double click on program name and change the original system and give the name of system in which you are tyring to make changes in that program.
I have applied this solution many times and this will also work for you.

JTextPane edit mode (insert or overwrite)???

How can I know which edit mode (insert or overwrite) is used in my JTextPane?

but I need to have overwrite mode too in my JTextPaneThen why didn't you state that in your original question?
Here is my version that allows you to toggle between both modes:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.text.*;
import javax.swing.event.*;
import javax.swing.plaf.*;
public class OvertypeTextArea extends JTextArea
     private static Toolkit toolkit = Toolkit.getDefaultToolkit();
     private static boolean isOvertypeMode;
     private Caret defaultCaret;
     private Caret overtypeCaret;
     public OvertypeTextArea(int row, int column)
          super(row, column);
          setCaretColor( Color.red );
          defaultCaret = getCaret();
          overtypeCaret = new OvertypeCaret();
          overtypeCaret.setBlinkRate( defaultCaret.getBlinkRate() );
          setOvertypeMode( true );
      *     Return the overtype/insert mode
     public boolean isOvertypeMode()
          return isOvertypeMode;
      *     Set the caret to use depending on overtype/insert mode
     public void setOvertypeMode(boolean isOvertypeMode)
          this.isOvertypeMode = isOvertypeMode;
          int pos = getCaretPosition();
          if ( isOvertypeMode() )
               setCaret( overtypeCaret );
          else
               setCaret( defaultCaret );
          setCaretPosition( pos );
      * Override method from JComponent
     public void replaceSelection(String text)
          // Implement overtype mode by selecting the character at the current
          // caret position
          if ( isOvertypeMode() )
               int pos = getCaretPosition();
               if (getSelectedText() == null
               && pos < getDocument().getLength())
                    moveCaretPosition( pos + 1);
          super.replaceSelection(text);
      * Override method from JComponent
     protected void processKeyEvent(KeyEvent e)
          super.processKeyEvent(e);
           // Handle release of Insert key to toggle overtype/insert mode
           if (e.getID() == KeyEvent.KEY_RELEASED
           && e.getKeyCode() == KeyEvent.VK_INSERT)
               setOvertypeMode( ! isOvertypeMode() );
      * Paint a horizontal line the width of a column and 1 pixel high
     class OvertypeCaret extends DefaultCaret
           * The overtype caret will simply be a horizontal line one pixel high
           * (once we determine where to paint it)
          public void paint(Graphics g)
               if (isVisible())
                    try
                         JTextComponent component = getComponent();
                         TextUI mapper = component.getUI();
                         Rectangle r = mapper.modelToView(component, getDot());
                         g.setColor(component.getCaretColor());
                         int width = g.getFontMetrics().charWidth( 'w' );
                         int y = r.y + r.height - 2;
                         g.drawLine(r.x, y, r.x + width - 2, y);
                    catch (BadLocationException e) {}
           * Damage must be overridden whenever the paint method is overridden
           * (The damaged area is the area the caret is painted in. We must
           * consider the area for the default caret and this caret)
          protected synchronized void damage(Rectangle r)
               if (r != null)
                    JTextComponent component = getComponent();
                    x = r.x;
                    y = r.y;
                    width = component.getFontMetrics( component.getFont() ).charWidth( 'w' );
                    height = r.height;
                    repaint();
     public static void main(String[] args)
          JFrame frame = new JFrame();
          frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          OvertypeTextArea textArea     = new OvertypeTextArea(5,20);
          textArea.setFont( new Font("monospaced", Font.PLAIN, 12) );
          textArea.setText("abcdefg");
          frame.getContentPane().add( textArea );
          frame.pack();
          frame.setVisible(true);
}

Inserting Images and Logos - works in the edit mode, but does not save nor show in final PDF format - help?

I have tried several times - but when I load a logo or image in to a form template - it shows up on the template in edit mode but when I save it for PDF final format and use - the image or logo disappears. What I am doing wrong?

Is this a form that you're creating in FormsCentral?

ChaRM Allowing Multiple Users in the Same CD to be in Edit Mode

We have upgraded to ChaRM 7.1 but are still using CRMD_ORDER and Transaction Monitor CRM_DNO_MONITOR. When the Developer completes her change, populates the Current Processor with the Change Manager and clicks Save she keeps the CD open in Edit Mode. The Change Manager is able to open the same CD and click Edit without any warning on the bottom of the window saying it is being processed by another user.
When there is a hand off to the next Current Processor, both the previous and current user are able to be in edit mode. I don't recall this being allowed before. Has this changed with 7.1?

DGS wrote:
I have a global temp table (GTT) defined with 'on commit preserve rows'. This table is accessed via a web page using ASP.NET. The application was designed so that every one that accessed the web page could only see their data in the GTT.
We have just realized that the GTT doesn't appear to be empty as new web users use the application. I believe it has something to do with how ASP is connecting to the database. I only see one entry in the V$SESSION view even when multiple users are using the web page. I believe this single V$SESSION entry is causing only one GTT to be available at a time. Each user is inserting into / selecting out of the same GTT and their results are wrong.
I'm the back end Oracle developer at this place and I'm having difficulty translating this issue to the front end ASP team. When this web page is accessed, I need it to start a new session, not reuse an existing session. I want to keep the same connection, but just start a new session... Now I'm losing it.. Like I said, I'm the back end guy and all this web/connection/pooling front end stuff is magic to me.
The GTT isn't going to work unless we get new sessions. How do we do this?
Thanks!You may want to try changing your GTT to 'ON COMMIT DELETE ROWS' and have the .Net app use a transaction object.
We had a similar problem and I found help in the following thread:
Re: Global temp table problem w/ODP?
All the best.

Contact bug : contact phone numbers in edit mode are not shown in "dial" mode

Contacts can have seemingly unlimited phone numbers as seen in the contact edit mode, though very few are shown in the corresponding non-edit mode. Of course, Dialing is not supported in the edit mode.
I have found that contacts that include pause characters or block characters are not properly displayed in the contact "dial mode". If you every try a conference call service, this is important to you.
At&t uses the comma as a pause, and Verizon uses the letter "t" as a pause. *82 temporarily blocks your caller id. Somehow the WebOS software that chooses which items to allow me to dial has bugs and worse, there is no clear way to prioritize so I am completely at the whim of the software.

I have tested entering 12 phone numbers on my own Pre Plus and all the numbers display in the normal contact field. How many phone numbers are you trying to to display?
The dialing options on the Palm Pre Plus are as follows:
To insert a two-second pause in the dialing sequence, enter a T where you want the pause to appear. To add a + symbol in the dialing sequence for international dialing, press and hold 0 (zero) in the location where you want the + symbol to appear. To insert a stop in the dialing sequence, enter a P where you want the stop to appear; to dial the next set of numbers after the stop, tap the screen.
As far as 3rd party special dialing character entry you would need to check with the 3rd party on how to enter this information into you device for your conference calling service.

Table in edit Mode with infinite lines ?

Hi,
We are designing an application, where as one of the requirement is to have a table with infinite open lines for user input.
By Default table should be in EDIT mode and user should be able to enter values without the need to click on a line to insert a new row every time he/she wants to input a value.
How can we acheive this requirement in WDA. In classical dynpro it is very easy to do this.. but I am struggling to find a way around for this..
Thanks in advance.
Regards
Rohit Chowdhary

Hi Rohit,
>My experience with tables that are over 1000 lines, showed performance and
>even stability issues for IE.
I can only emphasize what Phil said. Especially, in your case with an editable table, displaying more than 50 rows at a time (depending on the number of columns) can cause a bad user experience, because the browser needs to handle all the html and javascript we throw at it.
Imho there are two solutions:
(a) Try to use the ALV
(b) In case you would like to use the table ui element, you could add enough empty context elements to the context node where the table binds to, so that a user has always plenty of empty rows available. A toolbar button could provide the user with more initial lines.
Best regards,
Thomas

JQuery-Script only working when WebPart is in Edit Mode

Hi there,
so I developed some custom functionality with SPServices that works fine in my dev-environment. Now Im trying to deploy it in the productive environment and Ive struggled for several hours but cant get it to work.
This is my code: http://pastebin.com/DvStqiet
I insert the code inside of a simple form webpart.
When the webpart / website is in edit mode, the code executes fine.
When its not in edit mode, the jquery functions work, but the spservices functions do not seem to work. I get the error "Das Objekt unterstützt diese Eigenschaft oder Methode nicht." (in english its something like "The object does not support
this property or method."). Line number of the error then points to the first occurrence of $.SPServices(). (Firefox Screenshot of Console: http://imgur.com/QvozF38)
I searched nearly the whole Internet and tried different solutions.
I wrapped the $(document).ready(function() {}) like this: ExecuteOrDelayUntilScriptLoaded(function() {}, "sp.js");
And I tried writing the code directly to the webpart page via sharepoint designer. It does not work then either and I even cant enter edit mode.
I found out, that the masterpage-Template is also referencing a jQuery-Instance (v 1.4.2), so I tried disabling the reference in my script, but the result is the same.
I also tried referencing the scripts via absolute URLs, without success.
The references to the scripts seem to work (I can click them in sharepoint designer). I just dont know why it is not working. If you have any further suggestions or have any idea how to tear this problem down, or find out whats maybe causing it, please let
me know because Im really clueless right now...
Thank you very much!

OK it seems like I got it to work with the following:
I just wrapped my entire code inside of
(function($) {
// Your usual jQuery code here using `$`,
// this code runs immediately
})(jQuery);
and now it works. Im really happy, that it finally works... Seems like some other javascript (maybe referenced by the master template?) is overwriting the $.

When running in edit mode get error

When I sgtart Premiere Elements in the edit mode I get an error. The error "There Is No Disk In Drive. Please Insert A Disk in Drive \Device\Harddisk\DR". I am running on Windows 7 X 64. I have no such drive on the system. Any ideas as what is happenong. I have tried reinstalling the program but the error persists. Thanks for any help.

Dbritt26
This is an old story which may have a solution if your program is Premiere Elements 13.
If your program is version 13, then delete or rename the OldFilm.AEX file from OldFilm.AEX to OldFilm.AEXOLD.
That file is found
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-Ins
Common
NewBlue
and in the NewBlue Folder is the OldFilm.AEX file.
Please let us know the outcome.
Thanks.
ATR

IPhoto 06 fullscreen + edit mode issue

hi!
edit mode doesn't work: where the photo should be displayed, there is just the white background.
fullscreen mode doesn't work, too: clicking on the icon makes the screen become black (menu bar still visible) and then iphoto hangs. (disk permissions already repaired + same issue on another user account)
any ideas? anyone has the same problems?
thanks. k!
Powermac G5 Mac OS X (10.4.4)

I found this on another page and it fixed all the problems!
Ok for all those people that had the same problem:
Open a terminal window : less /System/Library/PrivateFrameworks/AppleAppSupport.framework/Versions/Current/Re sources/version.plist
If in there you see a version number that is 1.2 then you have found your problem, it should be version 1.4 and has been causing problems for many.
If you have version 1.2 rather than 1.4 then do the following in terminal : mv /System/Library/PrivateFrameworks/AppleAppSupport.framework /System/Library/PrivateFrameworks/AppleAppSupport.framework.old
Then with your Tiger install DVD inserted then : cp -pr /Volumes/Mac\ OS\ X\ Install\ DVD/System/Library/PrivateFrameworks/AppleAppSupport.framework /System/Library/PrivateFrameworks/
If you have a tiger update DVD then use the following : cp -pr /Volumes/Mac\ OS\ X\ Update\ DVD/System/Library/PrivateFrameworks/AppleAppSupport.framework /System/Library/PrivateFrameworks/
You probably need to do a "sudo bash" (and enter your password) to start with to become the root user. This will create a shell running as root - the superuser.
I hope this helps.

How to make a field in non Editable mode

Hi All:
Now i created one form through wizard method this consists of following details
Table name:T1
Fields:No,Name
here my requirement is how to make this "No" field in non editable mode after the insertion of the first record.

You can make it a display item, you can disable the item, or you can set the update property to No. See the set_item_property in the Help documentation.

EDIT MODE

Hello ,
I created a new view and insert it in the BPHEADOverview.
How can i make this view "editable" always ?
Lilach

Hi Lilach,
For all the context nodes in your view, go to each of the attributes within the context node and change the get_i_* methods to the following.
   rv_disabled = 'FALSE'. "always in edit mode
* DATA: current TYPE REF TO if_bol_bo_property_access.
* rv_disabled = 'TRUE'.
* IF iterator IS BOUND.
*    current = iterator->get_current( ).
* ELSE.
*    current = collection_wrapper->get_current( ).
* ENDIF.
* TRY.
*      IF current->is_property_readonly(
*                    'CAMPAIGN_ID' ) = abap_false.           "#EC NOTEXT
*        rv_disabled = 'FALSE'.
*      ENDIF.
*    CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
*          cx_crm_genil_model_error.
*      RETURN.
* ENDTRY.
Regards, Chew

Why does Edit mode shift content?

When ever we go into edit mode the navigation shifts out of place.
We've noticed that Contribute CS5 is adding extra code to the live page which doesn't appear in the files on our computer.
This is the code that's being added that seems to be causing the issue.
(<p style="margin-top: 0; margin-bottom: 0;"> </p>).
Is there a fix for this?

This issue was resolved by changing the Paragraph Spacing option setting in
the Administrator Setting area (as Dominic mentions). Thanks for the quick
feedback and link to resolve it!
It does not seem obvious to me why this setting should cause the issue that
we were seeing. Not that I need to understand the mechanics behind why this
is the case, but in order to help other people resolve this issue if they
encounter it I'm wondering if you can elaborate on the paragraph spacing
blog... either by adding a section on "Related Issues" or tag it with
keywords like "extra spacing", "contribute inserts code", "spacing issues",
etc.

Insert Edit Mode

Similar Messages

Maybe you are looking for