Inserting an X in the box.

I am trying to make a pdf fillable and got to where all text is fillable but I can not figure out how to make the boxes that require an X in them accessible.
When I use the Touch Up Text Tool, all it does it plavce the X in front of the box and not in it.
How can I change the properties of the box to accept the X?

I should have clarified my situation more.
I have a document that was already made as a pdf but was not fillable.
I have been trying to make it 100% fillable because it looks more professional when submitted but it appears that what I thought was fillable is not complete as I can not change the boxes that were in the document into boxes that accept X's.
Also, when I type in the are to enter text, all I get is a text box to the side with what I typed in but the text I entered is not showing up in the document.

Similar Messages

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?

All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.

How do I let a inserted picture flow over the other text boxes

I am creating a poster. I have a text box on top and one on the bottom. I want to insert a picture in the middle and want the picture to kind of flow around the other two text boxes without blacking out the two text boxes. Also, how can I curve the text boxes to a slight curve.

Inspector > Wrap > uncheck Object causes Wrap
Peter

Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

i have the same problem no radio stations at all bit shabby hate technolgy now adays

Insert an image in the reply box

Dear all,
Anybody please tell how to insert an image inside the reply or compose box here? How to attach the .png files inside this box? when i click on insert an image and attach its not properly attached. I need to do like one in the attachment here.....

Dear smercurio,
Really you are helping me a lot all the time. Thanks a lot.
I was looking for such a tool for a very longer time. B'coz of you only i came to know about it now.
Thanks,
Mathan
Message Edited by mathan on 05-06-2008 11:12 PM
Message Edited by mathan on 05-06-2008 11:13 PM
Attachments:
yahoo.gif ‏7 KB

Can I use my iPhone 6 out of the box to take photos, before syncing it with my computer?

I will be receiving a new iPhone 6 at the beginning an upcoming trip and would like to use the great camera on it to take photos. The problem is I won't have my computer with me during this trip. Will I be able to use my iPhone right out of the box to take photos, and when I sync my iPhone for the first time will I risk losing those photos? Thank you for the help.

Will I be able to use my iPhone right out of the box to take photos
Once you have activated the iPhone with a sim inserted
when I sync my iPhone for the first time will I risk losing those photos?
Yes unless you transfer Photos off iOPS device to your PC/Mac
see this
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Brand New Ipod touch 4th gen right earphone jack not working out of the box. Bought at Wal-Mart yesterday. Are we missing something in the set up or should we return it?

We just purchased an ipod touch 4th gen 8 gb from Wal Mart. OUt of the box the right headphone is not working. Tried numerous pairs of headphones..tried the mono settings and nothing is working. Is there a setting we are missing or should we just return it?

If the headphone plug is fully inserted, I would return the iPod for a replacement

Music only plays thru the speakers by inserting a plug in the headphone jack. pavilion dv6-6127cl

HP Pavilion dv6-6127cl (Notebook PC)
I have spent over 6 hours on the phone with tech support, but I remain unable to have any sounds go directly to my built-in "Beats" speakers. I can make the speakers work if I insert a plug into the headphone jack on the keft side of the notebook. If I plug in headphones to listen, I do get sound out of my headphones, but I also get sounds out of the builr-in soeakers. Tech Support insisted that either I spilled liquid onto my keyboard. (I did not), I dropped the notbook. (I did not), or the my computer was infected with a virus.
I doubt that this problem was virus related, because the problem happened during a 4 month period that I had no internet service. To be certain there are no viruses, I took the extreme action of restoring my notebook to the factory condition. I still have the same problem.
During my 6 hour troubleshooting marathon, the support technician had me update my BIOS and initiate many lengthy self-test procedures, all to no avail.
Please send me information on who to send this laptop to for repair or replacement under the original warranty.
I also have another issue. Tech support claims that my notebook warranty expires in November, but I purchased this notebook from Sam's Club brand-new, in an un-opened box in mid-January 2012. How can this date be explained and/or corrected?
Many Thanks,
Mike McKinney
Rockledge, FL.
USA
(321) 636-3500

Hello spl1080,
Your headphone jack is not working correctly on the laptop.
Was everything working correctly before you upgraded to Windows 8?
I know that you said that you updated the driver, but did you try the driver for Windows 7 and 8.
Here are the links for the drivers.
Windows 7
Windows 8
If you are planning on sending it in to HP to have it repaired they will make you run a recovery before you send it in.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Digitally signing using Acrobat XI and Mac OS 10.9.2- won't let me type signature- the box appears but can't adjust font or any other aspect of text.

I just purchased Acrobat XI pro for Mac. I have OS 10.9.2 When I got to digitally sign, it only allows me to sign using certificate- which does not render a legible name- and is an apple authorization certificate. Or if I go to "type text" the only type showing in the box is Helvetica 12. I can't adjust that. then I put my name in and that's it. It does not look like a signature. I was hoping to insert an image
or at least have it look like a signature.
What can fix this?
Darcy

When I click "place signature" I only have one option.
It asks me "How would you like to create your signature?
The only option available to me is "use a certificate- When I attempt to use another option there are some but they are not available to me."use an image" draw my signature, or type my signature
are not available.
For that reason I went to preferences to see what I could do to change the settings- and all I could do was manage the certificate signature- so that it looks better than it did.
As an aside- after doing that- the document went on and the person couldn't sign because it had an "open password" If you also know about that- that would be great.
This is the only reason I purchased the Adobe XI so I could draw my signature or type it and have it appear as a signature.

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

After placing a new text box in my document, typing new text, clicking away, then coming back to edit the text, I am unable to get my cursor to reappear within that text box. I can only select the box itself. I cannot select the text. Where is my cursor?

Even simpler than that.
Clicking once in a text box selects it.
Clicking once in a selected text box places the insertion point in the box.
The clicks do not need to be close enough in time to be read as a double click.
The same behaviour applies to table cells in Pages and in Numbers.
Regards,
Barry

How to insert new values in dropdown box through coding

hi,
I want to insert new values in dropdown box in a table.
Please provide me the corresponding coding.i already did this code but result is empty dropdown.I mapped the context properly..
int sklength=wdContext.nodeSkills().size();
      for(int i=0;i<sklength;i++)
    String getsub=wdContext.currentSkillsElement().getSubject();
    if(getsub.equals("50000138"))
         //IPrivateDetails1.INewskillElement el=wdContext.createNewskillElement();
         List lis=new ArrayList();
         //lis.add("Abap");
         //lis.add("Workflow");
         IPrivateDetails1.INewskillElement el=wdContext.createNewskillElement();
         el.setTskill("abap");
         lis.add(el);
          el.setTskill("workflow");
          lis.add(el);
          wdContext.nodeNewskill().bind(lis);
          //wdContext.nodeMonthsOfYear().bind(MonthsOfYear);
          wdContext.nodeNewskill().setLeadSelection(1);
    else
          wdContext.currentNewskillElement().setTskill("C++");
waiting for a positive reply......
with regards,
S.Kiruthika

kiruthika,
Too many logical errors to explian.
Should be:
IPrivateDetails1.ISkillsNode nSkills = wdContext.nodeSkills();
IPrivateDetails1.INewskillNode nNewSkill = wdContext.nodeNewskill();
int sklength = nSkills.size();
boolean cppAdded = false;
for(int i=0;i<sklength;i++)
String getsub=nSkills.getSkillsElementAt(i).getSubject();
if(getsub.equals("50000138"))
    List lis=new ArrayList();
    IPrivateDetails1.INewskillElement el1 = nNewSkill.createNewskillElement();
    el1.setTskill("abap");
    lis.add(el1);
    IPrivateDetails1.INewskillElement el2 = nNewSkill.createNewskillElement();
    el2.setTskill("workflow");
    lis.add(el2);
    nNewSkill.bind(lis);
    nNewSkill.setLeadSelection(1);
else if (!cppAdded)
    cppAdded = true;
    IPrivateDetails1.INewskillElement elCpp = nNewSkill.currentNewskillElement();
    if (null == elCpp) {
      elCpp = nNewSkill.createNewskillElement();
      nNewskill.addElement(elCpp);
      nNewskill.setLeadSelection( nNewskill.size() - 1);
    elCpp.setTskill("C++");
VS

Localize (multilingual , bilingual) error messages in out of the box (OOTB) new / edit item form.

In a multilingual environment am using variation. I have 3 sites root site, English site and Arabic.
All my lists are in root site with one condition I need to use out-of-the-box forms for data entry. My problem is when I try to insert an item in root web list, it will display English version of new item form.
I cannot duplicate entry forms for each language, because if a new field is added in list I need to translate and update all the forms manually.

I'm missing how your question is related to Microsoft Office? What kind of a solution is this (so that I know which forum to move the question to)?
Cindy Meister, VSTO/Word MVP,
my blog

Just updated my mac from Tiger to Mountain Lion. Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help.

I just updated my mac from Tiger to Mountain Lion. wiped the computer clean and started fresh Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help. in Looking for help I was directed here. what do I do?

I don't know enough to not follow directions. I bought the software brand new in a sealed from factory box. Had it sitting around until - last week when I deleted flash on my computer and had to upgrade to the new OSX. Mountain Lion doesn't use iPhoto - so I had to go with something else. Since I already had this new - unopened package I opened it up. Shut down all running programs - inserted the disk and followed all the directions for installation. Still it didn't work.
I have now uninstalled it (the proper way) and am going to try again.
I appreciate your responses.
Thank you!
If this doesn't work - I am going to just buy Lightroom.

How do I insert an underline to the right of a label

How do I insert an underline to the right of a label

Gen,
With all due respect, you should support that. Not having this option in renders FormsCentral pretty much unusable for my organization. Boxed fields are not appropriate for printed forms. Underlined fields are an option when creating a form from an existing document, so why not when creating a new form in FormsCentral? At best, this is an oversight. Or, it is part of an attempt to force me to purchase a Livecycle Designer license, which sadly is no longer included with Acrobat. If this is indeed the case, then you should know that (pay attention, texas001) the tedious but less expensive workaround to this is to:
1. Create a form in FormsCentral;
2. Save theFormsCentral form as PDF form;
2. Print the new PDF form to PDF (yes, print the PDF to PDF);
3. Create a form based on the printed PDF;
4. Format fields as underlines instead of outlines.
Regardless of the reason, Adobe has succeeded in a) devaluing Acrobat, and b) inconveniencing its non-power users. Poorly done.
Adam Lundstrom
Technical Documentation Specialist
Climax Portable Machining and Welding Systems, Inc.
[email protected]

Damaged right out of the box

Just opened the box containing my black MacBook.
First thing I did was to turn the machine upside down and press the battery-life indicator button. All five buttons lit up (good!), but I was a bit turned off to see that one of the edges of the case where the battery rests was chewed up a bit, as though a tech had inserted a screwdriver and tried to pry the thing out!
I called the shop where I bought the thing (Bic Camera, an authorized Apple dealer in Tokyo) and was told, sorry, they don't take back Apple products, and that I'd have to call AppleCare.
So I thought to myself, well, what's a couple of minor knicks. The thing is going to get scratched eventually anyway. So I decided to live with it.
That's when I noticed the lid...
When closed, the lid doesn't line up evenly with the bottom half of the PowerBook. It's off by about an eighth of an inch on the left side and the left top edge. That is NOT acceptable.
Just called AppleCare, talked to a polite AppleCare representative, and am now awaiting a return call from the rep's "supervisor."
Given my long experience with Apple products, my guess is that I just happened to get a dud from among what I'm sure are tens of thousands of perfectly built machines. That said, I'm a bit hesitant now to buy the white MacBook that I told my wife I'd get for her this weekend. Not until I know these things weren't simply slapped together...
My question: Has anyone else purchased a MacBook whose build is less than satisfactory?

No build problems, but DOA nonetheless. I walked out of the store with one not more than 2 hours ago, and when I got home it was dead within minutes of starting up. Got the spinning wheel of death, but couldn't move it with the mouse. It was completely hung. Gave it 5 minutes, but no luck, and no key/reset combination would unstick it. Had to unplug, but then it wouldn't reboot. (I'm an expert user, and I know that I did absolutely nothing wrong or unkosher, so it was definitely not me.)
But I'm enough of a believer to give it another go! The machine is sweet, no question about it. I just hope our cases are the rare ones.
AlumBook 15" Mac OS X (10.3.9)

Inserting an X in the box.

Similar Messages

Maybe you are looking for