Inserting timestamps after set time

I am pritty new to labVIEW and am wondering how to insert a timestamp after a set time (say 30minutes) after the temprature has risen above a set level (in this case 30C).
Thanks
Chaz

Hi Chaz,
Thanks for the post and I hope your well.
If I understand the question correctly (which Im not sure I do), you want to generate a time stamp after a certain condition?
If so, in the example below we time how long the loop has been running for. The trigger is the stop button. You could change this logic to produce a true when X amount of time had passed.
However, when you say time stamp - I assume you mean you want to time stamp your data? Now normally in DAQmx the waveform data generated already contains time stamps. If your trying to build your own waveform have you tried using the Build Waveform Node?
Or maybe your trying to do this?
How Do I Include a Time Stamp in a File Using the Write To Measurement File.vi
http://digital.ni.com/public.nsf/allkb/68806B93A21355E98625726F0064822B?OpenDocument
Please post back so we can help you some more,
Hope this helps,
Message Edited by Hillman on 12-04-2008 12:35 PM
Message Edited by Hillman on 12-04-2008 12:38 PM
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Attachments:
Time Stamp.JPG ‏18 KB

Similar Messages

Required passcode after set time

Hi, I want to be able to have a passcode be required after 1 hour on my iPhone. But the only options I see go up to 15 min. Is there a way to set it for an hour in iOS 7. I am running iOS 7 on my iPhone 5. All help is appriciated, Thanks.

Hi Chaz,
Thanks for the post and I hope your well.
If I understand the question correctly (which Im not sure I do), you want to generate a time stamp after a certain condition?
If so, in the example below we time how long the loop has been running for. The trigger is the stop button. You could change this logic to produce a true when X amount of time had passed.
However, when you say time stamp - I assume you mean you want to time stamp your data? Now normally in DAQmx the waveform data generated already contains time stamps. If your trying to build your own waveform have you tried using the Build Waveform Node?
Or maybe your trying to do this?
How Do I Include a Time Stamp in a File Using the Write To Measurement File.vi
http://digital.ni.com/public.nsf/allkb/68806B93A21355E98625726F0064822B?OpenDocument
Please post back so we can help you some more,
Hope this helps,
Message Edited by Hillman on 12-04-2008 12:35 PM
Message Edited by Hillman on 12-04-2008 12:38 PM
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Attachments:
Time Stamp.JPG ‏18 KB

Stop app after set time

Is there a way or an app that will stop an app after a given time. There are several radio apps that I would like to go to sleep by. But I cannot figure out how to have radio app stop after 30-45 minutes.
Thanks,
Bill Wallace

Well, I 'll give you one trick that I use alot when I ever wanted to know:
When will a certain event occur in the future ?
In your case: the event is "Time elapsed for all the events or runs".
It may help you, and may not help you, Good luckMessage Edited by Ayman_Metwally on 02-28-2005 10:36 PM
Ayman Mohammad Metwally
Automation Engineer
Egypt - Cairo
Attachments:
current.GIF ‏18 KB

Screensaver won't activate after set time

I know this has nothing to do with FIOS,but can anyone give me an idea what is wrong with my screensaver not activating,Thanks DRZEE

It would help..
Screensaver of what device?
Some examples..
#1 A cell phone?
#2 A BlackBerry Device?
#3 A PDA or Smartphone Device?
Note: and which one (brand and model number, requested)?
#4 A computer?
What OS and Version? For example: Windows XP Home with SP3?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Logout user after set time and return to page in site?

Anyone any ideas how to do this
tia
Paul

Hi Paul
i think there is someone here has the idea.
Please check here
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.com

"No bootable device --- insert boot disk and press any key" after setting up Bootcamp

Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1709658208      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384          88
1711337472   242186240      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 -   25 127 14 [         1 -     409639] <Unknown ID>
2: AF   25 127 15 - 1023 254 63 [    409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
Here is also the list of my disks:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         119.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         875.3 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                124.0 GB   disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS FusionDrive            *975.5 GB   disk2
                                 Logical Volume on disk0s2, disk1s2
                                 FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
                                 Unencrypted Fusion Drive
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                            GRMCPRXFRER_DE_DVD     *3.2 GB     disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!

So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
    =========================================================
    Name:         Fusion
    Status:       Online
    Size:         1190201270272 B (1.2 TB)
    Free Space:   0 B (0 B)
    |
    +-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     255716540416 B (255.7 GB)
    |
    +-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     934484729856 B (934.5 GB)
    |
    +-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
            Disk:                  disk2
            Status:                Online
            Size (Total):          1185508581376 B (1.2 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Fusion HD
            Volume Name:           Fusion HD
            Content Hint:          Apple_HFS
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         255.7 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         934.5 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
   4:       Microsoft Basic Data BOOTCAMP                64.9 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion HD              *1.2 TB     disk2

After setting the time properties to 2 sec

Hi all,
after setting the time properties to 2 sec teh movie runs on its own after publishing
and doesn't stop at the designated stops
can i hold the movie to a frame for 2 sec in another way?
tia
Herman

If you just want to kill time, insert this Lingo :
t = the ticks + 1000 * N -- where N = number of seconds to pause
repeat while the ticks < t
end repeat
The only drawback is that Director won't accept any interaction while the loop executes

Is it Possible to Insert Quiz Slides at Set Times During a Video?

Hi all,
I'm fairly new to Captivate, so I apologise in advance if this question has already been answered and I couldn't find it.
I work in higher education and we create a lot of screencasts with academics speaking over Powerpoint presentations. During a presentation there is often several points where the academic would like to ask the user a question. What I want to know is if there's a way of adding question slides during a video?
Many thanks,
Ross

You will have to split up that video to be able to insert slides in between.
2015-04-23 16:42 GMT+02:00 Ross_P <[email protected]>:
Is it Possible to Insert Quiz Slides at Set Times During a Video?
created by Ross_P <https://forums.adobe.com/people/Ross_P> in *Adobe
Captivate* - View the full discussion
<https://forums.adobe.com/message/7470510#7470510>

How to get remaining time for baton after setting timeOut property

Hello,
Is it possible to get the remaining time for baton after setting timeOut, or do I have to maintain a separate Timer for that?
Been following this excellent tutorial here http://tv.adobe.com/watch/adc-presents/create-shared-forms-in-livecycle-collaboration-serv ice/

Thanks Nigel, before reading your reply, I came up with something like this, but it seems extending the Baton class is not enough, as I would need my own BatonProperty as well that uses this extended Baton class...
Also attempted to get some help here http://stackoverflow.com/questions/7116814/actionscript3-lccs-how-to-access-property-paren t-class-protected-var/7116882#7116882
Could this be made into a feature request for Baton and BatonProperty, se we could easily get the remaining time please? I guess I can wait for a future release.
/custom as file /
package com.mysite.BatonExtender
     import com.adobe.rtc.sharedModel.Baton;
     import flash.events.TimerEvent;
     public class BatonExtender extends Baton
          public function BatonExtender()
          super();
          _autoPutDownTimer.addEventListener(TimerEvent.TIMER,countDown);
          trace("CURRENT TIMER:"+_autoPutDownTimer.currentCount);
          trace("BATONEXTENDER added");
          public function countDown(p_evt:TimerEvent):void {
               trace("TRACING START countDown....");
               if (_autoPutDownTimer.running) {
                    trace(_autoPutDownTimer.currentCount);
                    //sharedTimer.value = String(90 - _autoPutDownTimer.currentCount);
               trace("TRACING END....");

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

No Internet access after setting up time capsule

I am setting an airport time capsule. After setting up new network, I no longer have Internet access and can not set up the time capsule. I have tried to cycle the power on my model but no luck. Any ideas?

Disconnect all connections from the Time Capsule except the AC power cord.
With the Time Capsule powered on for a few minutes, hold in the reset button on the back of the device for 10-12 seconds and release
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect an Ethernet cable from one of the LAN <--> ports on the Actiontec modem/router to the WAN "O" port on the Time Capsule
Open up AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule
The utility will display a window that looks similar to the illustration below, excep that there will be a picture of the Time Capsule instead of an AirPort Express
Network Name......Enter a name that you want to call the wireless network
Base Station Name....Enter a name that you want to call the Time Capsule
Password......Enter a password that will be used for both the wireless and device name
Verify the password
Click Next
When you see the the message of Setup Complete, click Done
Now you can select the new network that you created and enter the password to connect
Try to keep the Actionec modem/router and Time Capsule at least 6-8 feet (or 2 meters) apart from each other to help minimimize the chances of wireless interference between them.

Why do my Reminders sometimes not alert after the set time?

Why do my Reminders sometimes not alert after the set time? I've tried re-starting repeatedly. I've tried deleting older completed reminders (I only had 300). Is there a fix for this?

You problem sounded rather odd, so I tried to duplicate it in iTunes 11 and I couldn't.
I turned off copy to iTunes media folder when adding to library, then I moved a music track that was not in the iTunes media folder from folder A to folder B and right clicked on it and selected open with iTunes and it played fine. (I have to do it this way as iTunes is not my default player for MP3).
However the consequences of doing this are that you end up with two copies of the track in the library database, the original which can no longer be found as it is not in its original location and the new entry pointing to the correct location which plays OK.
So as far as I can tell, there must be something else going on as I can't dublicate your problem in iTunes 11
You may find this program interesting
iTunes Folder Watch
http://albumbrowser.klarita.net/iTunesFolderWatch.html
If you want an easy time with iTunes it really is easier to let iTunes manage your music in the iTunes media folder. Also it make life a lot easier if you want to move to a new disk or PC as iTunes can tolerate the iTunes media folder being moved as long as you tell it where it is.
Added
I realised that my last experment was not a purchased track.
When I did it with a purchased track, iTunes recognises that it should be in the library database and brings the track up with an exclamation mark next to it. Strangely the track was added to the library with the correct loaction and would play on the secon try.
Odd behaviour, maybe it is something to do with the icloud storage system as iTunes knows you purchased the track.

Where do albums in iphoto go after the time selected to "show " them. I currently have it set to 18 months in preferences.I have OSX 10.7.4

Where do albums in iphoto go after the time selected to "show " them. I currently have it set to 18 months in preferences.I have OSX 10.7.4
Do they just delete. Are they in a file in my finder somewhere.??
Thanks-Did a search but couldn't find anything.

Unless you erased the disk when you reinstalled OX v10.7, your apps should still be in your Applications folder.
You can only, "Accept" one time...
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

After a power outage Apple TV can't find date and time - just keeps spinning on that screen. Tried powering off Apple TV, the computer, and the router. Tried to restart Apple TV. Tried to restore Apple TV, but it got stuck again setting time/date.

Welcome to the Apple Community.
Along with the things you have tried, some have had success setting the location to the US.

HT201250 After setting up my time capsule, I noticed that my iphoto library and music was not backed up. The documents and .jpg's was back up, do I need to do something else in the set up?

After setting up the time capsule, and completing a full back up, I noticed my iphotos and music was not backup. I have all my documents and .jpg files but no music from Itunes or photos from iphoto? Do I need to set something else up?

Can I ask you how you know your photos and music are not backed up?
Open a Finder window to your Pictures folder (you should see your current iPhoto Library file). Go to the Time Machine icon in the menubar, then click Enter Time Machine to use the TM interface, and go back in time to a random point. Is the iPhoto Library file still there? If so, it's being backed up.
If not, is there any chance you've excluded those folders from TM preferences? Click Options on the TM system preference panel and see if you have exclusions.
Matt

Inserting timestamps after set time

Similar Messages

Maybe you are looking for