Insight how ascp Order Priority (field Order Priority) is derived ?

Anyone has detailed information on how ascp assigns "Order Priority" in the Order Priority field in the workbench ?
I understand one factor is Priority Rule, but I need more detailed logic behind it.
Is this field really meant to tackle the priority of working through all the recommendations ?
Thanks much.

Hi
ASCP uses priority rule to generate an order priority for end demands like SO, forecast etc. Once this is generated, it uses pegging information to derive order priority for the supplies based on demands it is used to satisfy.
For example, a supply pegged to a sales order may get higher priority than another supply pegged to a forecast in similar time bucket. You may make use of more advanced priority rule settings including custom extensions to set order priorty for demands which will finally derive order priorty for the supplies.
Setups like FIFO vs. priorty pegging may also impact this derivation. Please let me know if you may require further details in this respect.
Thanks
Navneet Goel

Similar Messages

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

How to make a field profit center mandatory in sales order?

Dear GURUS,
Please help in getting answer for following question.
How to make a field profit center mandatory in sales order?
With Regards
Sandeep D.

Hi,
There are 2 ways to make profit center mandatory
1.Transaction Variant
2.Incompletion procedure
1.Transaction Variant
Step 1:Goto Tcode shd0 and input transaction as va01 and give name of transaction variant as ( example. zva01 ) and click on create or F5
Step 2.Then it takes you to sales order screen.Just click on enter untill you see profit center field.
Step 3.check the box required against profit center.
Step 4.click on save ( under a package name or as local object ) and exit
Step 5.Assign transaction variant to your sales order type through tcode v0v8.
2.Incompletion Procedure
You can add the field table-vbap,field- prctr,status-04,check-warning to your existing incompletion procedure Tcode- ova2 assigned to your order type in tcode vov8 and check the box - incomplete messeges for your order type through tcode vov8.
If incompletion procedure is not assigned to your order type than you have to create a new incompletion procedure and assign it to order type.

How to get a field that using variable in order to create a query

Hi,
I found a difficulty when creating a query. so, I would like to ask you some question.
1. How to get a field that using variable which that field I want to put it in my query?
For example, I would like to take quantity field in inventory audit report. And when I put my cursor in
quantity field, there was only variable, item, etc. How to get this and put it in query?
2. How to combined the invoice quantity with inventory audit report quantity?
3. I have a query like this:
SELECT distinct T0.[DocDate] as 'Tanggal', T0.[DocNum] as 'No.Faktur', T1.[ItemCode] as 'Kode Barang',
T1.[Dscription] as 'Deskripsi', T1.[Quantity] as 'Quantity', ((T1.[LineTotal])/(T1.[Quantity])) as 'Harga
Satuan', T1.[LineTotal] as 'Harga Total', T3.[CalcPrice] as 'HPP Satuan', ((T3.[CalcPrice]) * (T1.
[Quantity])) as 'HPP Total', T4.[ItmsGrpNam] as 'Jenis Barang', T5.[SlpName] as 'Nama Sales', T1.
[WhsCode] as 'Kode Gudang' FROM [dbo].[OINV] T0 INNER JOIN [dbo].[INV1] T1 ON T0.DocEntry =
T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OINM T3 ON T2.ItemCode
= T3.ItemCode INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod INNER JOIN OSLP T5 ON
T0.SlpCode = T5.SlpCode WHERE T3.[TransType] = '13' and T3.[CreatedBy] = T1.[DocEntry] and T0.
[DocDate] >=[%0] and T0.[DocDate] <=[%1] and T4.[ItmsGrpNam] =[%2] and T1.[WhsCode] =[%3]
Is it possible if I just take one invoice with invoice quantity and only show up at once although I have a
lot item cost for that item? (because I'm using FIFOmethod).
Please help me.. cause I'm stuck with this thing :l.
Thank you very much, and I'm waiting your respon soon.
Regards,
Sisca

Try this one:
SELECT distinct T0.DocDate as 'Tanggal', T0.DocNum as 'No.Faktur', T1.ItemCode as 'Kode Barang',
T1.Dscription as 'Deskripsi', T1.Quantity as 'Quantity', ((T1.LineTotal)/(T1.Quantity)) as 'Harga
Satuan', T1.LineTotal as 'Harga Total', T3.CalcPrice as 'HPP Satuan', ((T3.CalcPrice) * (T1.
Quantity)) as 'HPP Total', T4.ItmsGrpNam as 'Jenis Barang', T5.SlpName as 'Nama Sales', T1.
WhsCode as 'Kode Gudang'
FROM dbo.OINV T0 INNER JOIN dbo.INV1 T1 ON T0.DocEntry =T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OINM T3 ON T2.ItemCode = T3.ItemCode AND T3.TransType = '13' and T3.CreatedBy = T1.DocEntry AND T3.Warehouse = T1.WhsCode
INNER JOIN OITB T4 ON T2.ItmsGrpCod = T4.ItmsGrpCod
INNER JOIN OSLP T5 ON T0.SlpCode = T5.SlpCode
WHERE T0.DocDate >=[%0\] and T0.DocDate <=[%1\] and T4.ItmsGrpNam =[%2\] and T1.WhsCode =[%3\]
Thanks,
Gordon

Question - How does the Priority feature of the Send Port work?

How does the Priority feature of the Send Port work?

The Priority setting of the Transport Advanced Options controls the order in which messages are removed from the messageBox. Ports with higher priority will be processed earlier than the ports with lower prioirty making the higher priority ports more important
relative to other send ports within a single host.
Refer:
Send Port Priority
The highest prioirty is 1, and the lowest is 10. The default value is 5.
Rachit

How can order win.8 recovery set in india?...

Hello sir,
I have pavilolion g6 2231tx laptop.. Some days ago my hard disk was field. My laptop is in under warranty so it replaced.. But i can't created OS recuvery disk and lost it...so now how can order new recuvery disk....pls hep me...!!

Kamlesh
Call them up and ask, they'll be happy to send you one:
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=in&dlc=en&lc=en&os=4132&product=5340271&sw_lang=
Order recovery media:
http://support.hp.com/in-en/document/bph07143/
Do inform them of the hard drive failure and subsequent replacement done.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Hi , I have just created an iphotobook and when i moved on to order it , it could be only shipped to Australia and U.S.As, I live in Greece do you have any idea of how to order it and deliver it in Athens, Greece ?

Hi , I have just created an iphoto book but when I was about to order it , i realised that iphoto books can only be shipped to Australia and USA . Does anyone have any idea how to order and deliver the book in Athens , Greece ?????

No
Here is a list of the countries supported for print products -- http://store.apple.com/us/help/print_products/routing
in teh past I have seen some people report that they were able to pick a nearby country and use their shipping address - I have not done this and have no idea what the results were
LN

How to order the photos in a slideshow

how to order the photos in a slideshow

Just like for any other photo - select the photos in the album and use the command "File > Order Prints".
Be careful, not to include any text slides. If it is difficult to select the photos in the slideshow, create a new album from the photos in the film strip (File > New Album).

How to order / group a report by a placeholder column ?

How to order / group a report by a placeholder column populated by the group filter ?
In more detail .....
My Data model editor's select statement brings back (say 1000 rows) from the database.
The group filter decides (on performing certain validations) whether to print a row or not in the report.
Additionally the group filter calculates a "rule type" (just a rule number to say on basis of what rule, the row was selected)
I would like to order/group the report on the placeholder column which was calculated by the group filter ?
Obviously, I won't be able to add the "ORDER BY :CP_RULE_NUMBER" in the sql statement as the placeholer column cp_rule_number
is determined by the group filter level only. (If I do, I get a frequency error)
Any ideas ?
Thanks in advance.
Edited by: user553361 on 8/10/2008 17:35

how is the group filter implemented?
If its pure PL/SQL, what about putting the filter-procedure in a stored function into the database? Then you could use the group filter in your query.

How Production Order finish date and time is being comptued by SAP?

Hello Expert,
How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
how does SAP compute the time 13:28 as it finished time
Please explain me briefly.
Thanks
Ryan

Hello Guys,
When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
thanks

Very urgent :how I order by my report within the report option not change i

Hi master
Sir I design the report but I need my report order by cheq_no now my report order by voucher no but If I change in query then my format must be change that very problem for me I again design
Is any option in report through which I order by my report as per my require column I is if I need on cheq_no , voucher_no or date
Please give me idea how I order by my report within the report option not change in report query
Thanking you
aamir

Use a lexical parameter (see online help):
select ...
order by &sort_parameter

[svn:fx-trunk] 11118: Did some code cleanup on the Spark components to enforce the conventions about how to order stuff within an AS file .

Revision: 11118
Author:   [email protected]
Date:     2009-10-23 16:35:38 -0700 (Fri, 23 Oct 2009)
Log Message:
Did some code cleanup on the Spark components to enforce the conventions about how to order stuff within an AS file.
QE notes: None
Doc notes: None
Bugs: None
Reviewer: None; no functional changes
Tests run: ant checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/ButtonBar.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/CheckBox.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/NumericStepper.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Panel.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/RadioButton.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Spinner.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextArea.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextInput.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ButtonBase.a s
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ListBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/SkinnableTex tBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as

Hi Rod,
different sources (i.e. different branches) are mapped to different local folders in your workspace - in fact you cant map two different server folder to the same local folder.
In you example the mapping would be (for example) like this:
Server path
local path
$/../WpfHelloWorld
C:\Src\WpfHelloWorld
$/../WpfHelloWorldDev
C:\Src\WpfHelloWorldDev
You can see your Workspace mappings when you select "Workspaces..." in the Workspace selection drop down:
Within the "Manage Workspaces" dialog select your workspace and klick "Edit" to see and edit all you mappings.

Creative Zen - how to order playlis

I just got the new creative zen but I can't figure out how to order the playlists. When I create a new one, it orders it alphabetically. In media explorer, if I drag/drop it to a new place, it doesn't fall into the new position, it adds all the songs from that playlist to the one I just dropped it on. It never "fits" in between the other playlists.

"Because wma files take less space than mp3 files. "
That is a myth. For lower bitratrate files, such as 6 kbps or 32 kbps, WMA files will sound a bit better than mp3 files at the same bitrate. Files at such low bitrates are typically lectures and podcasts, and not music. Music files are usually 28 kbps and up. At
those bitrates, there is little quality difference between WMA and MP3 files at the same bitrate. WMA files do take more processor power to decode though, so expect shorter battery life when playing WMA files rather than mp3 files. Furthermore, recompressing files that are already compressed will result in lower sound quality. For example, if you have some mp3 files at 256 kbps and want them on your player at 60 kbps to save space, you should make the 60 kbps mp3 files from the CD, and not from the 256 kbps mp3 files if you want the 60 kbps mp3 files to be the best quality they can be.

Hi how to order iPhone 5 with delivery to Russia

hi how to order iPhone 5 with delivery to Russia???

The apple online stores don't ship outside of their own countries, so you will either need to use one of the premium resellers that is within Russia or find another online store that will ship overseas.

How production order create in MTS scenario

hi
Actually production order created based on Sales order,through MRP run(md02,04) , it will check the stock(avilability control), if it has less stock than sales it create the production order.
Based on demand planning , we want to start the production ,so how production order created, we need to create directly CO01, OR any process is there
plz reply
regards,
sowmya

Actually production order created based on Sales order,through MRP run(md02,04) , it will check the stock(avilability control), if it has less stock than sales it create the production order.
I feel this is existing process of your client
Based on demand planning , we want to start the production ,so how production order created, we need to create directly CO01, OR any process is there
1) If you want to consider both MTS and sale order in production then maintain strategy group 40 in MRP 3 view
2) Create a PIR ( plan) in MD61
3) Run a MRP in MD02/MD01
4) As a result of MRP, you will get a plan order
5) convert the plan order into production order in MD04

Insight how ascp Order Priority (field Order Priority) is derived ?

Similar Messages

Maybe you are looking for