Inspire T6060 - sound from all satellati with 1 jack

i had an old cambridge 4. sitem ad it has 2 jack a green one and a black one, if you plug just jack it is possible to hear music from all the speackers
now i upgrade at inspire T6060 but at the moment i dont have a 5.1 sound card, till i will get one i would like to hear music from all the speackers instead of the 2 front one
i tryed to plug just the green jack but the sound come just from the front speackers, is it possible to make it come from all just with one jack, how?

Headphone jacks are only good for so many in and out usages. Usually its the headphone jack itsefl that goes bad first but sometimes it is the internal part. If you are lucky you can clean out the inside and get it to work.
These devices are not made to last for someone who actually has those headphones around there neck and acually uses there listening devices through out the day plugging it in and out. This is not in any way an Apple thing, it is a problem with many devices. The male ends tend to get dirty hanging around then scratch the female end when used. In fact, using higher end headphones you can really notice even the smallest particles of dust on the male end of plug when used, that is the small popping you might notice when the cord moves.
Hopefully its a problem on the male side of things.
I would recommend a person that wants to use headphones alot to keep a small 2 inch extension plugged into there device that can be replaced when it goes bad inplace of wearing out the original plug.
Again, this is not an Apple problem alone.

Similar Messages

Stereo sound from all speake

Hii, I have a X-Fi Xtreme music and a 5. speaker setup, can someone tell me how can I get stereo sound from all of my speakers? thanks in advance.

Hmmm, I don't have an X-Fi, but to answer your question the first thing someone needs to know is how you have your speakers connected. If, for example, you're running throgh a receiver you need to separately output each channel (using 3.5mm mini plug to RCA cables/converters you would buy at Radio Shack) to the external decoder of your receiver. Of course, in that insance, you would output the DD source stream from the optical out of the card through the optical in of the receiver; stereo playback would be from a 2. signal. I run both configs on mine. Now, if you're running computer speakers already plugged into the correct outputs of the sound card that's a different question, and it's one I can only relate from my experience with the Audigy 2 software.

I am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones

i am getting no sound from all of the game apps on my ipad. i.e. angry birds, scrabble, but I can still get sound from the ipod app. also I can hear the games if I am using earphones

You have your mute button on. In Settings check to see if you have Lock Orientation checked or Mute checked on the right hand side. If you have Mute checked, all you need to do is click the mute button above the volume control buttons on the upper right hand side of your iPad. If you have Lock Orientation checked in settings, you double click your home button and the most recent apps will appear. Swipe your finger to the right until the Mute icon appears on the left side. Touch it and you will unmute system sounds.

How to compare input sound (from mic.) with sound on my database

i want to campare sound (from mic.) with sound on my database
ex:
if i say "hello" it show message "hello"
but if i say other word it will show message "try again"
forgive for my english
eak_

Speech recognition is a whole area in its own right
Lots of info and other references and the Java Speech APIs can be found here
http://java.sun.com/products/java-media/speech/index.jsp

No sound from audio speaker or headphone jack

Hello all i bought a HP Probook 4535s from a friend and im not getting any sound from the speakers or headphone jacks. I have flashed the BIOS to the F.41 and this didin't fix the problem. I also deactivated speakers in the BIO settings and re enabled them and this still didn't fix the job. I also replaced the speakers themselfs. Any ideas would be appriciated Thanks

Hi @cblake118 ,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
http://h30499.www3.hp.com/hpeb/
I work for HP

How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?

How can I delete pictures imported on my ipad from my camera with usb jack ?, How can I delete pictures imported on my ipad from my camera with usb jack ?
I have hundreds of pictures and I want to delete completely the imported files.
Thanks

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

No sound from Apogee Jam with iPad mini and Lightning-30 pin adapter

Hello everybody.
I'm trying to use my Apogee Jam with iPad mini but I am unable to hear any sound from it. Jam seems to work, since the led become green and react to the guitar signal. I tried two different guitars and different cables but nothing changes. Jam also works perfectly on MacBook Pro and garage Band, so I first assumed the issue was in the iPad or in the Lightning-30 pin adapter (genuine).
Oddly on AmpliTube I can tune the guitar, so some signal arrives to the iPad, but I can't do the same on JamUp, where the tuner seems not to reiceve any signal. Are there some settings I should check on the apps?
Thanks for any suggestions!

Make sure you have the monitor input turned on in GarageBand. http://youtu.be/Eb8bN3tExio

No sound from external speakers with music and apps on 3gS

I'm having sound problems with my 3gs. I've read quite a few posts about this and have come to a dead end.
My problem is that there is no sound from apps of music etc from the external speaker but there is from phone calls.
This is what I've tried:
The silent button is off.
I've put the headphone in and out many times to know avail. (I don't consider this to be the problem as when the jack is taken out the volume bar dissapears)
I've blown down the headphone jack.
I've cleaned out the usb socket with a toothpick
I've done a restart
I've done a reset and a full reset with newly downloaded firmware.
To me it's acting as if it is docked into an external speaker.
Any other suggestions.
Darren

Is the iPhone able to still play ringtones and songs via headphones? If so, your iPhone probably thinks it is connected to a dock. I had this problem and while I don't suggest it, I messed rather vigorously with the dock/cable port at the bottom before the volume reappeared. I hope this helps.

How to mute incomming sound from all callers when ...

We sometimes transmit a meeting for worship to sick ones who dial in to listen. If they don't remember (or don't know how to) mute their microphones we get feedback through the PA because the laptop headphone socket is fed into the PA to play music.
Is there a button I've not yet seen in Skype that will "Mute all incomming sound from callers"?

I've never tried this but I think its what you are after.
On the skype menu, go to Tools and then Options
Select Sounds
The is an option to Mute all sounds - this should stop any incoming sound including erroneous cam and mic audio from all callers and I think will allow your outgoing sound to transmit ok.

No sound from internal speakers or headphone jack

HP 15 notebook PC
windows 8.1 64-bit
not getting any sound from internal speakers at all. no sound from headphone jack. was working fine yesterday. updates to drivers are good. i can see sound signal in the speaker bar. please help.

Hi,
Can you post back with the full Model No. and Product No. of your Hp 15 series notebook - see Here for a guide on locating this information.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No sound from front or read audio jack

I am using an 810-230qe Phoenix Envy with WIndows 8.1 Pro. I am unable to hear sound from the front headphone jack or the rear audio jack. Speakers also do not work from the rear jack. I have an HDMI cable connected to my monitor, however, I went into the NVIDA controls and disabled sound for that.
I have uninstalled the driver and then reinstalled. No luck with either jack. Headphones work in all other devices. I have even tried different headphones. This is a new computer, just a few days old and this is the first time I tried to use sound.
Any ideas?

Hello aloehnert,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having audio issues on your HP ENVY Phoenix 810-230qe CTO Desktop PC. You stated that you disabled the audio on your monitor does that mean it worked before you disabled it? Has the audio ever worked on this and is just not working now? If you go to the control panel and click on Sounds what devices do you see there and are they Enabled or Disabled?
If you could answer these questions it would help a great deal in getting you a possible solution. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Connect to the computer a sound system 7,1 with one jack ??

hello everybody, i want to buy?the speakers system T7900, but i have only one jack slot on my computer. i have read that i can connect a system 7,1 with this slot, but i don't understand how is possible? to connect a 7,1 with jack slot. For information, i have a fujitsu siemens m3438g 75005 thank you to answer me

I think there's no problem in connecting a 7.1 system with one jack (if so always with the green one)But you have a cheap solution that allows you to have sound on all speakers:Buy two of these http://img.mercadolivre.com.br/jm/im...65_670.jpg&v=P
And in one of them insert the yellow and black jack and this adaptor will insert in one of the holes of the other adaptor along with the green jack having something like this.yellow/black | | adaptor/green | | adaptor | sound card
But, although it woks you won't have the same surround sound that you could have if you connected the speakers with the 3 jacks to a sound card (without adaptors). Hope you understand, and sorry for the bad english, I'm portuguese
Message Edited by grimreaper9 on 08-07-2007 03:03 AM

No sound from speaker port with X-fi, but headphones and line out are f

After going through a lot of driver updating yesterday, I encountered several bad drivers and had to do a system restore a few times. However, after I did that my Sound Blaster X-fi card stopped putting sound out through the speakers. I tried uninstalling and reinstalling the driver, updating the driver, reconnecting everything, running diagnostics, and looking at the system settings, but nothing works. Oddly enough, when it's either disabled or not used as my default playback device (apparently I also have a Realtek AC97), the speakers will play, but when I try using X-fi it doesn't. The odd thing is that the AC97 was one of the corrupt drivers (which I removed and returned to its original driver, don't know what the date was), but the X-fi didn't have any problems at all, but now it seems glitchy whenever I try to do anything with it, including trying to uninstall the drivers and looking it up in the System Information console. The Device Manager says I have the most recent driver for the X-fi right now, but even if I roll it back it still doesn't work. Can somebody please tell me what I should do, because this seems like a software issue to me. OS: Microsoft Windows XP Edition (Service Pack 2)System Model: Dell DXG05
Primary Sound Driver:?Creative X-Fi Audio Processor (WDM)
Manufacturer:?Creative Technology, Ltd.
Status:?OK
PNP Device ID:?PCI\VEN_02&DEV_0005&SUBSYS_00302&REV_00\4&26EC 2DE&0&2090
I/O Port:?0x0000CCE0-0x0000CCFF
Memory Address:?0xDCE00000-0xDCFFFFFF
Memory Address:?0xD8000000-0xDBFFFFFF
IRQ Channel:?IRQ 6
Driver:?c:\windows\system32\drivers\ctaud2k.sys (5.2.0.20-2.0.0760, 502.50 KB (54,560 bytes), /8/2005 6:5 AM?Secondary Sound Driver: Realtek AC'97 Audio
Manufacturer:?Realtek
Status:?OK
PNP Device ID:?PCI\VEN_0DE&DEV_0059&SUBSYS_0C3028&REV_A2\3&72 E68DD&0&68
I/O Port:?0x0000E800-0x0000E8FF
I/O Port:?0x0000EC00-0x0000ECFF
Memory Address:?0xDFFFC000-0xDFFFCFFF
IRQ Channel:?IRQ 2
Driver:?c:\windows\system32\drivers\alcxwdm.sys (5.0.5874 built by: WinDDK, 3.48 MB (3,647,04 bytes), /4/2007 9:05 PM)

EXACTLY THE SAME PROBLEM HERE!
I havent got another motherboard to test my x-fi xtreme music on, but it's a very frustrating problem, if i boot up from cold the soundcard is either not recognised or is recognised but there's no sound output.
My motherboard is ASUS P5E3 Pro,
Memory: 8GB OCZ DDR3 600
Cpu: x9650 extreme @ stock 3.0GHz
Psu: Coolermaster 850w modular
Gfx: HD 5770 (will be changing this to a HD4890 soon as it's rubbish)
Ive tried all sorts of combinations to try and get this soundcard working properly, stick of ram, etc... NOTHING WORKS AND IM ANNOYED!
Ive played about with just about every bios setting i can find (theres a lot on this board) and still no luck, i've got the latest bios flashed and everything is upto date, as a musician this problem is very irritating, having to reboot the computer about 3 times to get the sound working! even then theres problems with sound drop-outs.
Makes no difference if i use windowsXP or windows7 the problem still remains, i might ask asus to make a bios update for this problem because im not sure if creative have the answers.

[SOLVED] No sound from tv card with mplayer, only arecord/aplay

So I finally got my Hauppauge 950Q usb tv tuner working with mplayer so I can see the video with this command:
mplayer tv:// -tv driver=v4l2:norm=NTSC:input=0:device=/dev/video1:chanlist=us-cable
but I can't get any sound unless I run this command simultaneously:
arecord -D hw:1,0 -r 32000 -c 2 -f S16_LE | aplay
I assume I need to translate the arecord arguements into mplayer arguements, but I'm not really sure how. Can anyone help me out?
Thanks!
Last edited by normman (2010-08-31 18:05:01)

I followed the directions here: http://inspirated.com/2007/04/05/alsa-l … th-mplayer and made the command:
mplayer tv:// -tv driver=v4l2:norm=NTSC:input=0:device=/dev/video1:chanlist=us-cable:alsa:adevice=hw.1,0:amode=2:audiorate=32000:forceaudio:immediatemode=0
and now it works.

Get Sound From Rear Speakers with X-Fi XtremeMusic card

Have the SB X-Fi XtremeMusic soundcard combined with the Digital I/O Module so i can get digital sound through my 6. Sony Amp. I have the Digital I/O module connected to my amp via a Coaxial cable. I have set the speaker set up to 6., and have run the channel test in the Creative Console Launcher. Now heres the problem im having, i get the correct sounds coming from the front left, center, and right speakers, but when it tests the rear left speaker, the sound comes from the front left instead on the rear left, for the center rear the sound comes from the front center, and for the right rear the sound comes from the front right speaker. Can someone tell me how i get the correct sound come from the rear speakers please?

The Xbox encodes the sound on the fly to form a DD stream. No PC game encodes DD by itself, even when the game is DD certified it needs a soundcard capable of encoding it, like the soundstorm on the nforce2. If your receiver supports analog inputs use them, the DD compression would probably degrade the sound at least to the same degree than an analog connection.

Inspire T6060 - sound from all satellati with 1 jack

Similar Messages

Maybe you are looking for