Install 11.2.0.3.0 database on Red Hat Enterprise Linux Server v.5.7

1. if I need to install 11.2.0.3.0 database on Red Hat Enterprise Linux Server v.5.7,
Here I see 11.2.0.1.0 for Linux x86-64 on the following website._
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-linx8664soft-100572.html
Do I download the following and then apply the 11.2.0.3 patch?_
Oracle Database 11g Release 2 (11.2.0.1.0) for Linux x86-64 Linux.x64_11gR2_database_1of2.zip (1,239,269,270 bytes) (cksum - 3152418844) linux.x64_11gR2_database_2of2.zip (1,111,416,131 bytes) (cksum - 3669256139)
2. I need to install 11g and 10g in a same server, I am also looking for a good document.
Thanks.
Jack

user3023234 wrote:
thanks. I will look into it.
how do you install 10.2.0.4 and 11.2.0.3 on the same server?You can install multiple homes in a server.
Every Software dump consists of installer(runInstaller).
Even you can install same Oracle version & release in same server by differentiating Folder names.

Similar Messages

Patches for Installing Oracle 9i on Red Hat Enterprise LINUX 3.0 AS

I recently purchased An Oracle Database Enterprise Edition � Trial License.
I am attempting to install Oracle 9i on Red Hat Enterprise Linux Advanced Server 3 (RHEL AS 3).
After several unsuccessful attempts and consultation with the FAQs available on the Oracle site I have discovered
that it can not be installed without the following patches.
P3095277_9204_LINUX.zip
P3238244_9204_LINUX.zip
P2617419_210_GENERIC.zip
P3006854_9204_LINUX.zip
P3119415_9204_LINUX.zip
Can anyone tell me how I can aquire these patches?
This is for an eval of the product on the platform mentioned above. If I can not complete a successful install,
there is no way for my company to evaluate the product
and eventually purchase it.
You can contact me at this email address [email protected]

Daer suneetkapoor:
I am looking for P3006854_9204_LINUX.zip in order that can be properly able to install oracle9i on Linux AS 3. And I saw you to reply the message on forum that you can share the patch. Would you mind if you can send an email with the patch for me immediately, I will greatly appreciate it.
thanks you
regards
ellery
PS: My email address is [email protected]

ColdFusion 10 install fails on Red Hat Enterprise Linux 5.8

I'm trying to install ColdFusion 10 on a Red Hat Enterprise Linux 5.8 server with Apache 2.2.3. The install appears to complete with no errors. After some searching the web, I found I had to change the adobe connector shell script to use my directories instead of the bogus ones that were there. The httpd reports that the mod_jk is loaded (apachectl -M returns jk_module (shared) among other things). However, when I attempt to load a ColdFusion page, my web server says "503 Service Temporarily Unavailable". I've look in the log files for httpd and for ColdFusion and see nothing amiss, but I am new to this ColdFusion.
It appears my Apache httpd is not communicating with the ColdFusion process, which is listening on ports:
TCP *:8012
TCP localhost.localdomain:8007
TCP *:7995
TCP *:6085
TCP *:8575
TCP *:1243
Any suggestions?
Danial for bannock21

Here are the entries in the mod_jk.log file:
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] jk_open_socket::jk_connect.c (448): socket() failed (errno=22)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1027): Failed opening socket to (127.0.0.1:8012) (errno=22)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] ajp_send_request::jk_ajp_common.c (1649): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=22)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_service::jk_ajp_common.c (2629): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] jk_open_socket::jk_connect.c (448): socket() failed (errno=22)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1027): Failed opening socket to (127.0.0.1:8012) (errno=22)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] ajp_send_request::jk_ajp_common.c (1649): (cfusion) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=22)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] ajp_service::jk_ajp_common.c (2629): (cfusion) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2)
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [error] ajp_service::jk_ajp_common.c (2648): (cfusion) connecting to tomcat failed.
[Tue Oct 09 17:05:28 2012] [15754:47552417982912] [info] jk_handler::mod_jk.c (2725): Service error=-3 for worker=cfusion
How do I set Tomcat to listen on the correct port?
How do I check whether Tomcat is even running?

How do i install firefox into my Red Hat Enterprise Linux Professional Work Station 3

I do not know how to install firefox. To my Red Hat Enterprise Linux Professional Work Station 3.

First make sure that you meet the System Requirements (GTK+ and GLib) for the current Firefox version.
*http://www.mozilla.org/en-US/firefox/23.0/system-requirements/
*http://kb.mozillazine.org/Installing_Firefox#Linux
*https://support.mozilla.org/kb/Installing+Firefox+on+Linux

Can i install the Portal Server 7 on Red Hat Enterprise Linux 4 ?

hi all,
Can i install Portal Server 7 on Red Hat Enterprise Linux 4 ?
Thnx in Advance.

Hi All,
After tearing my hair out for about 3 weeks I've figured following are the steps for installing Sun Portal Server 7 on RH Linux 4. These though help successful installation I am still struggling to get the Single Sign On for the sample applications working.
1. Boot linux with the network cable disconnected. (cable disconnected or wireless disabled is very important).
2. set Hostname to localhost.localdomain
3. Start INstaller (I always used the root login).
4. Once the components list comes up "select All" then unselect "Sun POrtal Server 7" and "Sun Java System Portal Secure Remote Access". (trust me firends I am not kidding around).
5. Follow steps of installation. Provide a password wherever requested. Highly suggested that you note down the options and the values you are entering in each step. Its about 20 page installer. Also whereever host and domain is asked for use localhost.localdomain. IP should be 127.0.0.1. Valid IP and valid domain name will also work but I haven't gone that route yet.
6. Take special note of the LDAP Admin Password and LDAP user password. Note the usernames too. The admin password and user passwords HAVE to be different. DO NOT Forget the admin password. Default admin name is amAdmin.
7. Go ahead and let the installation complete.
8. I always used localhost.localdomain as domain name and host name and IP to loopback address 127.0.0.1
Once the installation is complete start newly installed server in the following sequence
A. To start localhost slapd:
cd /var/opt/sun/directory-server/slapd-localhost/
./start-slapd
cd /var/opt/sun/directory-server/
./start-admin
(you can test here by running ./startconsole and loggin in using the admin username and password (you you should have remembered those... don't tell me I didn't warn you :)...)
B. To start Sun Java System Application Server
cd /opt/sun/appserver/bin
./asadmin start-domain --user [username] --passwordfile [a simple txt file with only the password in it] [domain name]
e.g.
./asadmin start-domain user admin passwordfile adminpassword.txt domain1 OR
./asadmin start-domain user admin password pass123 domain1
takes a few seconds to kick it off.
open browser and go to http://localhost.localdomain:8080/ to check if application server is running
C. To start Identity Server
cd /opt/sun/identity/bin
./amserver start
Now go to the SunPortal Server installer again and run it.
9. In the screen that asks whether you want to install only or configure select configure now.
10. Fill in required parameters like password. and user name. ( I kept ALL default and used the same password all throughout except for LDAP admin, I am doing this for a PoC so security be damned at the moment ).
11. Be sure to fill in the correct LDAP admin and user passwords because else installation will fail.
12. Let the installation roll
13. At about 38% it will give a popup warning configuration may take upto an hour. If you get to click on this popups ok button good things are progressing fine. If not some server didn't start right.
14. Takes about 15 minutes (depends on machine config) after you hit okay for the configuration to complete. Anything lesser check logs for any failure notices.
15. IF all success reported congratulations!!!
16. Goto http://localhost.localdomain:8080/portal/ to go to portal home page
IT STILL DOESN"T WORK!!! HELP!!!
Folks after all I said above it still doesn't work. When I go to any of the portal server Sample Applications and try to log in using the default usernames
Community Samples has test/test
Enterprise Sample has mary/mary ed/ed etc
I cannot log in... The screen simply refreshes but doesn't go anywhere.
I am suspecting this is because the domain and host is pointing to localhost.localdomain instead it should be given a valid domain name and a valid host and a valid IP instead of 127.0.0.1. If anyone can throw anymore light on this I'll be grateful.

Steps to install Oracle 10g on Red Hat Enterprise Linux 4 AS

Hi Friends,
I want to install oracle 10g on Red Hat Enterprise Lnux 4 AS. Can anyone give me steps how to install oracle 10g on it? My machine configuration Processor 2.66ghz Intel, Memory 1024 MB , HDD 160 GB, 845 mother board.

In addition to the excellent suggestion by Paul, you may want to look at the internet resources such as
http://www.puschitz.com
http://ivan.kartik.sk
http://www.dizwell.com
each of which as Oracle install on Linux cookbooks.

Install Oracle 11.2 (ASM) failover on Red Hat Enterprise Linux Suite

Hi everybody,
I need installer Oracle 11.2 with asm on Failover Cluster Red Hat linux Suite (two servers), could someone help me?
There is documentation about that...
My idea is
- Installer oracle in both servers
- Installer Infraestructure Grid for asm in both server
- Create database on asm (ams disk shoud be same for boths servers)
Is soported gfs (global file system) and asm?
I have many doubts.
Thanks in advance.

I have several comments:
Don't use the RPM utility to install software. It does not resolve dependencies. As of RHEL 5, YUM or UP2DATE are the standard software management tools.
RHEL? Do you have a paid subscription or money to waste? If not, you will be much better off using Oracle Linux, because you can download it for free and also have access to all errata and patches for free (http://public-yum.oracle.com). If you need the RHCK kernel instead of the more advanced Oracle UEK kernel, which is optimized by Oracle for Oracle products, no problem, because Oracle Linux ships with both. If you want to use Linux ASMLib under RHEL 6, you need a RHEL subscription to download the kernel module. The Oracle UEK kernel includes the driver.
Also if you use Oracle Linux, you can install the oracle-rdbms-server-11gr2-preinstall package, which triggers the installation of all prerequisite software and takes care of kernel parameters and creating the Oracle account. You then simply set a password for the Oracle account and you're done.
RHEL 6.0. Why such an old version and not 6.4?
According to my records, you can use the following command under RHEL 6 to install the 11gR2 prerequisite software. Yum will automatically install other depended software as required.
yum install compat-libstdc++-33 compat-gcc-34 compat-gcc-34-c++ \
elfutils-libelf-devel ksh sysstat make gcc gcc-c++ compat-libcap1 \
glibc-devel glibc-common glibc-headers libstdc++-devel libaio-devel

Application Server 10g R2 install in Red Hat Enterprise Linux 5

Hi all,
We want to install Oracle Application Server 10g Release 2 under RHEL 5. We know it isn't certified yet, but it's necessary to install in that OS.
My question is if anyone knowns a good guide to install that OAS version in that plataform?
Thanks to all

the manuals are fine.

10.1.0.3 database on Red Hat ES 4.0

Anyone completed this? My OUI bombed out when it realised the O/S was version 4 but I hope there is a workaround for this.
I can't afford too much outage so it would be graet to know if it will work prior to re-installing RH4 (again).
Thanks

From Metalink:
Operating System: Linux (x86) Version Red Hat Enterprise Linux 4
Oracle Database - Enterprise Edition Version 10g
N/A Version N/A
Status: Certified
Product Version Note:
None available for this product.
Certification Note:
Existing patch sets:
10.1.0.3 Required
Please review document # B14145-03, the Oracle Database Release Notes 10g Release 1 (10.1.0.3.0) for Linux x86. This document will be available on OTN soon.

Installing Oracle 10g on Red Hat Enterprise 4

Is it possible to install Oracle on this version of Red Hat?
I am getting these errors:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8 or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at...
My red hat release is:
Linux taurus 2.6.9-11.EL #1 Fri May 20 18:17:57 EDT 2005 i686 i686 i386 GNU/Linux
Red Hat Enterprise Linux ES release 4 (Nahant Update 1)
I mean version 4 is available for Linux, is it supported or not by Oracle?
thank you.

That is Oracle Database 10g R2, it looks like R1 is not supported.This is the point of mis understanding. I am was talking about x86 and you about x86_64. :-)
Also check this out for further confirmation...
"No certification projected for 10g R1 64-bit on RHEL AS 4 x86_64 at the time of this writing."<snip>...at the time of this writing.</snip>
Current status is projected for R2
Please let me know if I am missing something.Ok conlusion from this topic is RH 4 (x86_64) is not certified with 10g at this time.

How Can I install Oracle 10g R1 Linux x86 on Red Hat Enterprise 6

I have tried so many times to install Oracle 10g R1 10.1.0.3 on the Red Hat Enterprise Linux 6 x86_64 but just its appear to be imposible, The Installer failed on the linking and make process.
i need to know if anyone has been installed the Oracle 10g on this SO or similar.
Thank you.

richardoom wrote:
I have tried so many times to install Oracle 10g R1 10.1.0.3 on the Red Hat Enterprise Linux 6 x86_64 but just its appear to be imposible, The Installer failed on the linking and make process.
i need to know if anyone has been installed the Oracle 10g on this SO or similar.
Thank you.V10 is obsolete, unsupported & not certified on V6 kernel.
Consider to either upgrade Oracle to V11.2.0.3 or downgrade OS to V5

Installing Oracle 9i database on Red Hat Linux 7.1

Hi,
I have downloaded Linux9i_Disk1.gz, Linux9i_Disk2.gz and Linux9i_Disk3.gz for installing Oracle 9i database on Red Hat Linux 7.1. I unzipped those files to Linux9i_Disk1.cpio, Linux9i_Disk2.cpio and Linux9i_Disk3.cpio. What is the command to extract these .cpio files to get all the associated files that are archived? Can anyone help me on this?
Warm Regards,
Manash Pradhan

Thanks a ton. I am sorry for not checking the download page since the download was done by another person.Thanks again.
Warm Regards,
Manash

Oracle 9i manual database creation on the Red Hat 9 Linux

I installed Oracle 9I on the Red Hat 9 Linux successfully with automatic database creation.
I tried to create second database manually and everything seemed to be fine until I issued create database statement. I got the following error:
ERROR at line 1
ORA-01092: ORACLE instance terminated. Disconnection forced.
Please help me to solve the problem.
Thank you,

Ok I am having the same exact problem and I am typing this into the shell before I run the installer.
export DISPLAY=yourdesktop:0.0
I thought that would fix the problem but it still hangs and gives the same message as the other guy gets. How can I solve this problem and get the installer running? I would really appreciate any help. This is the message I get:
[oracle@localhost linux]$ ./runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2003-08-02_10-09-53PM/jre/bin/java. Please wait...
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Window.<init>(Window.java:188)
at java.awt.Frame.<init>(Frame.java:315)
at java.awt.Frame.<init>(Frame.java:262)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
[oracle@localhost linux]$

Errors when installing SGD 4.5 on Red Hat Enterprise 5

I have a customer installing SGD 4.5 on Red Hat Enterprise 5 and is getting the following errors:
/opt/tarantella/bin/tarantella: /opt/tarantella/bin/bin/ttahostname: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
The customer has indicated that they do not have a lib directory?
Any ideas would be greatly appreciated !
Thanks
Jeff Holland

Hi.
Never tried under RH5 but, to me, it's pretty strange the customer does not have a /lib folder.
Are you in the position to check if their RH5 system is correctly configured (ie, not screwed up)?
Is that a 32bit or 64bit edition?
Could you manually "inspect" the /lib folder to see if there's some contents on it?
Last, under which user account is the customer installing SSGD? Is it operating as root user?
As per the Web site, RH5 is a supported platform so you shouldn't have any problems.
Cheers,
Rob

How to uninstall/remove 11g database on (OEL)Oracle Enterprise Linux 6?

Hi there,
I was facing problem during 11g installation & i'm trying to reinstall 11g database again, but at step8 of 13, it show the error [INS-32021] Insufficient disk space on this volume for the selected Oracle home. i guess because of the previous database files still exist, anyone can give some links or solution ?
Thank you in advanced.
Edited by: 907267 on 11-Jan-2012 00:08

I'm running both 11g as well as 10g on Oracle Enterprise Linux 6 Update 1 without any problem.
Yes I know that it isn't supported but it works.
To your question:
a. is it the ORACLE_HOME it complains about or is it temp? Very often temp fills up during an installation and is not freed after the installation ends.
b. for a cleanup of the existing installation you should remove OraInventory and the files in /etc (like oratab, oraInst.loc).
BTW: I have my own blog (streetkiter.wordpress.com) where I wrote a post how to install 11g and 10g (!) RAC on Oracle Linux 6.
Edited by: carajandb on 16.01.2012 09:02

Install 11.2.0.3.0 database on Red Hat Enterprise Linux Server v.5.7

Similar Messages

Maybe you are looking for