Install 11gR2 on RedHat 6 or OEL 6
Hi All,
I am installing 11gR2 on our Linux RH 6 server.
I got this pre-req setup for the install guide in ORACLE-BASE website (one of my idol site).
But when I restarted the server, I got error kernel panic , and can not boot the server
What parameter here caused it to panic? It did not mention specifically.
Please Helpppp...Thanks.
Hosts File
The "/etc/hosts" file must contain a fully qualified name for the server.
<IP-address> <fully-qualified-machine-name> <machine-name>
For example.
127.0.0.1 localhost.localdomain localhost
192.168.0.181 ol6-112.localdomain ol6-112
Oracle recommend the following minimum parameter settings.
fs.suid_dumpable = 1
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
Add or amend the following lines in the "/etc/sysctl.conf" file.
fs.suid_dumpable = 1
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
#semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default=4194304
net.core.rmem_max=4194304
net.core.wmem_default=262144
net.core.wmem_max=1048586
Add the following lines to the "/etc/security/limits.conf" file.
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 4096
oracle hard nofile 65536
oracle soft stack 10240
Amend the "/etc/security/limits.d/90-nproc.conf" file as described below. See MOS Note [ID 1487773.1]
# Change this
* soft nproc 1024
# To this
* - nproc 16384
Set secure Linux to permissive by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.
SELINUX=permissive
Once the change is complete, restart the server.
Hi,
Please refer the below document
Requirements for Installing Oracle 11.2.0.3 RDBMS on RHEL 6 on zLinux (s390x) (Doc ID 1470834.1)
Thanks,
Rajasekhar
Similar Messages
-
How to install 11gR2 on oel 5.4
how to install 11gR2 on oel 5.4?is there any side effect for 11gR2 on OEL 5.4 with ASM?
does oel 5.4 supports 11gR2 and ntfs mount?
Edited by: ghost_rieder on Sep 26, 2009 1:11 PMThe 11gR2 installation on OEL-5.4 is pretty simple and easy, although the OUI interface has been changed. No side effect with ASM, but installation procedure is something different (grid infrastructure) for a standalone installation (single database with ASM). Also, deinstallation of software is now performed via separate package 'deinstall' (not via OUI as before). There are 7 zip files downloadable from OTN:
linux.x64_11gR2_database_1of2.zip
linux.x64_11gR2_database_2of2.zip
linux.x64_11gR2_grid.zip
linux.x64_11gR2_client.zip
linux.x64_11gR2_examples.zip
linux.x64_11gR2_gateways.zip
linux.x64_11gR2_deinstall.zip
The first two are for database, the third is for grid infrastructure including ASM installation for single database. If you want a standalone installation with ASM, you must first install grid infrastructure software in its own oracle home (must be different from database home) and configure ASM and listener in that home. When ASM and listener are active and running in grid infrastructure home, install database software in database home and build the database via dbca in database home.
NJ -
Can't install 8i on redhat linux 7.3
Hello can anyone help. I am unable to install 8i on redhat 7.3. i have untar glibc118-v3 to /usr/local and done a link to files. But when i run "./runInstaller". I get "please wait initializing Java virtual machine" and it just sits there..
thanksHi,
Follow the steps, which is given by the URL
http://www.idevelopment.info/data/DBA_tips/DBATIP_53.shtml
Regds,
Nathan .K -
Java.lang error while installing 11gR2 Grid Infrastructure on HPUX 11.31
Hi,
I am installing 11gR2 Grid Infrastructure on HPUX 11.31 Itanium server for installing RAC database.
I do not get any error during the installation of the software but while running the root.sh I am getting following error..
# /opt/oracle/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /opt/oracle/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-04-23 15:09:28: Parsing the host name
2010-04-23 15:09:28: Checking for super user privileges
2010-04-23 15:09:28: User has super user privileges
Using configuration parameter file: /opt/oracle/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
stty: : Not a typewriter
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'bmblade-91'
CRS-2672: Attempting to start 'ora.mdnsd' on 'bmblade-91'
CRS-2676: Start of 'ora.gipcd' on 'bmblade-91' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'bmblade-91'
CRS-2676: Start of 'ora.gpnpd' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'bmblade-91'
CRS-2676: Start of 'ora.cssdmonitor' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'bmblade-91'
CRS-2672: Attempting to start 'ora.diskmon' on 'bmblade-91'
CRS-2676: Start of 'ora.diskmon' on 'bmblade-91' succeeded
CRS-2676: Start of 'ora.cssd' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'bmblade-91'
CRS-2676: Start of 'ora.ctssd' on 'bmblade-91' succeeded
Error occurred during initialization of VM
java.lang.Error: Permission denied
sh: 10154 Abort
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.ctssd' on 'bmblade-91'
CRS-2677: Stop of 'ora.ctssd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'bmblade-91'
CRS-2677: Stop of 'ora.cssdmonitor' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bmblade-91'
CRS-2677: Stop of 'ora.cssd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bmblade-91'
CRS-2677: Stop of 'ora.gpnpd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bmblade-91'
CRS-2677: Stop of 'ora.gipcd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bmblade-91'
CRS-2677: Stop of 'ora.mdnsd' on 'bmblade-91' succeeded
Initial cluster configuration failed.
Do anybody came accross this issue? I had 11gR2 Grid Infrastructure installed on this server, but for demostration to other team members, I removed the earlier installation using Metalink Note :942166.1. I will appreciate your input.
Regards
ShailandraHi,
One of the recommended solution for this issue by Oracle.
Have the DISPLAY variable set when running root.sh. This is the th recommendation by oracle to a SR opened by another vendor for this issue.
Regards -
Hi,
My question is the same as the subject written.
Can OAS9i and Portal be installed on Linux RedHat(kernel 2.2.19) platform? Basically, first, I can't find the OAS9i "*.cp" image files for RedHat Kernel 2.2.16 or later use, second, what I can download from OTN site is V1.0.2.2.1 which is for Linux RedHat Kernel 2.4.3-12 or later use. And I downloaded all the files which OAS9i version is V1.0.2.2.1, and failed to install on my platform. So I want to know is there anybody installing OAS9i and Portal successfully on RedHat 6.2(Kernel 2.2.19, glibc 2.1.3)? Or can share on other RedHat version had any successful installation processes or suggestion. Thanks in advance.
Regards!
Frank9iAS 1.0.2.x is only supported on Redhat 7.0 and Suse 7.2
Portal PM -
Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal ,
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment.
Thanks...
Edited by: flixblixclix on Jan 1, 2013 10:51 PM979352 wrote:
Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal , trying to install as root is a clear indication that you either haven't read the Installation Guide, or you are choosing to ignore it. If you missed or chose to ignore the point that the installation should not be done as root, who knows what else you missed or chose to ignore.
From Oracle® Database Installation Guide
11g Release 2 (11.2) for Linux ( http://docs.oracle.com/cd/E11882_01/install.112/e24321/inst_task.htm#BABJGGJH)
4.5.1 Running Oracle Universal Installer
For any type of installation process, start Oracle Universal Installer and install the software, as follows:
Logon as the Oracle software owner user (typically, oracle) to the computer on which you want to install Oracle components.
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment. Read the Installation Guide. Read all of it. Believe it.
>
Thanks...Edited by: EdStevens on Jan 1, 2013 8:24 AM -
Installing 11gr2 release 11.2.0.2 database in Windows 7 32 bit
Hi everyone,
I want to Install 11gr2 release 11.2.0.2 database in Windows 7 32 bit.
I have searched on download.oracle.com but i was not able to findout proper database compatible with windows 7. They had 11gEX db but i want to install simple 11gr2.
Please help me to download and configure database on windows 7 32 bit.
Thanks in advance.
Nish11.2.0.2 is only available from My Oracle Support (https://support.oracle.com), access to which requires a paid support contract with Oracle
11.2.0.1 can be downloaded from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Install Guide is at http://docs.oracle.com/cd/E11882_01/install.112/e24186/toc.htm - you will need Win 7 Professional or higher - Home version is not supported.
HTH
Srini -
Hi,
I try to install 11gR2 on Redhat5 64 bite.
So I create a new vmware session in my server
I install Redhat5 64bit I add thes packages for Oracle
I create ORACLE user I download the files from OTN.
When I run the "runInstaller" I get the first screen "Configuration Security Update" when I click on Next butom the screen hangs...and Idon't have any message!!.
Can you help please?Pl confirm that are following all of the steps in the Install Guide - http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/toc.htm
Pl post the last 100 lines from the install log - http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/app_ts.htm
HTH
Srini -
Linux: error in invoking 'ntcontab.o' of makefile while installing 11gr2
Hey all,
I installed Oracle Linux 6.1 under VirtualBox (hosted on a Windows 7 box).
All is well and I began to install Oracle 11g for Linux, but ran into this error:
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/home/Roy/app/oracle/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'. while installing 11gr2 client on Linux x86-64 bit serverWhen I dug into the logs, the error was this:
INFO: mv: cannot stat 'ntcontab.o'
INFO: : No such file or directoryCan anyone provide a link to resolution?
ThanksYou are using an unsupported OS - pl try with a supported OS version.
http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
HTH
Srini -
Oracle8i install errors on RedHat 6.1
When I try to run /mnt/cdrom/install/linux/runInst.sh I get the following error:
SIGSEGV 11* segmentation violation
Full thread dump:
Monitor Cache Dump:
Registered Monitor Dump:
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Monitor IO lock: <unowned>
Child death monitor: <unowned>
Event monitor: <unowned>
I/O monitor: <unowned>
Alarm monitor: <unowned>
Monitor registry: <unowned>
Thread Alarm Q:
I am using redhat 6.1 with jdk 1.1.6 v5, Pentium II 350 , 256MB RAM and 9GB UWSCSI.set as follows:
export DISPLAY=<ip address of PC>:0
it worked for me
Paul
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Celline Tongfack ([email protected]):
I am trying to install oracle8i on redhat 6.1
when I enter ./runInstall, it gives me this error"please set the display and try again." any one knows what i should set the display to? because it does not tell.
Help!!!!<HR></BLOCKQUOTE>
null -
How do download and install firefox from redhat command prompt step by step with commands
How do download and install firefox from redhat 6 command prompt
Im new to Linux so would appreciate step by step details with commandsIs your Windows Vista 32 or 64 bit?
To find out if your computer is running 32-bit or 64-bit Windows, do the following:
Open System by clicking the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking System.
Under System, you can view the system type. -
Error installing 11gR2 on windows 8
I downloaded oracle database 11gR2 software for windows X64 platform from OTN. it contains two distinct zip files(file1 and file2). the first file extracted but couldn't do the same for the second file. It keeps telling me zip file is empty. I decided to go along and install but after 40% (copying file), I got an error saying the file path was not found
' File not found C:\app\Chike\product\11.2.0\dbhome_2\owb\external\oc4j_applications\applications\WFMGRApp'
pls I need possible solutions to solve this.
thanks GuysFirst, Win 8 is not a certified OS to install 11gR2 - Oracle Database Preinstallation Requirements
Which version of Win 8 ? If you have Pro or Enterprise, you will have to install 12c - Oracle Database Preinstallation Tasks
Home versions of Windows are not certified for any Oracle installs.
You will need to download both zip files, then unzip both into a single directory before running setup.exe. Your unzip issue indicates that the second zip file is corrupted.
HTH
Srini -
I have install 11gR2 on my laptop getting error
I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive
I getting this error
ORA-01503: CREATE Controlfile / Failed
and
ORA-01158: Database already mounted
i need to set up a database a 3 different schema
because i am doing a install of Hyperion Share service, Essbase and Planning
this is the first install on my laptop !!!!!!!!!!!!!
can I get the detail process on setting up an Database and schema
Please adviseYou have already asked the same question but never replied - 11gR2 Error when installing a database essbase on install of 11.1.2.1
Cheers
John
http://john-goodwin.blogspot.com/ -
Hello
I have installed 11gr2 on my fedora 12.
The installation was smooth, but when I started sqlplus I get this error
$ sqlplus
sqlplus: error while loading shared libraries: libsqlplus.so: cannot enable executable stack as shared object requires: Permission denied
Not sure what this means. I searched the forums, found a similar question in Instant client on Fedora 12 ? , but that did not help.
If youu have any clues, pls post.
thanks1. Disable SELINUX
In Fedora , edit /etc/selinux/config and change the SELINUX line to SELINUX=disabled:
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Only targeted network daemons are protected.
# strict - Full SELinux protection.
SELINUXTYPE=targeted
2. reboot the machine -
Got the example schema scott when installing 11gR2 via response files
Hi everybody,
I installed 11gR2 on Solaris 10 x86-64 into a zone for testing purpose only and used the following variable:
# This variable controls whether to load Example Schemas onto the starter
# database or not.
oracle.install.db.config.starterdb.installExampleSchemas=false
It works pretty good but still got the scott schema an all his tables.
So please could someone give me a tip what goes wrong and how to avoid installing this schema onto the database.
Thanx in advance
Michael
Edited by: Michael on 18.02.2011 16:20Holy moly,
so could you please be so kind and tell me whats the right thread is?
Michael
Edited by: Michael on 22.02.2011 11:37
Maybe you are looking for
-
My text box option is grayed out both in the toolbox options and within the "insert" menu. What am I doing/not doing? I click outside the document, click on margin mark, what's up??
-
Warning Message in query result as 'Notification Number DBMAN 345'
Hi , I have a warning message while executing the query 'Diagnosis Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read. There is a restriction on a navigation attri
-
I have got the result below: 1 2 3 4 5 etc Eg:000001 000002 000003 I want to add leading zeros before the number. How is it be possible? thanks satya Edited by: user608405 on Aug 6, 2009 11:02 PM
-
Icons in photoshop and illustrator are too small to work
I have a samsung ativ book with high screen resolution (3200x1800). when I want to work with ps or ai their icons become extremly small. (the icons in indesign have a good size!) is there a possiblity to scale the icons up? I already turned up the sc
-
Why is Premiere Pro CC crashing on startup?
Hi, Premiere Pro CC crashes right after it starts to load a project, whether a new one or an existing one. It worked for a moment right after I had installed it, but when I closed it and tried to open it again, it started to shut down with no error m