Install BI Content - Revised Version equals Delivered (Changes lost)

Hello All,
In our 7.0 SP 22 BI Content 7.04 SP 03 environment, we installed BI content "before and after" with the default settings.
InfoObjects which had been modified and activated now had a revised version which matched the deliverd version.
The changes are lost in the revised version. The active vesrion still has the first set of changes.
I have not seen this behavior since BW 3.0!
We think we can manually copy the changes in the actiive version into the revised version for the second set of changes, but would prefer not to have to do so.
Does anyone know how we can "copy" the active verstion into the revised version, so we can start our second set of changes with a "current" copy?
Thank you for your help,
John Hawk

To restore the Revised version to Active version:
RSA1 -> InfoObject -> Change -> Characteristic -> Return to Active Vwerion.
John Hawk

Similar Messages

Install for Photoshop Elements Version 6. I lost my disk the link on the site to download the trail for elements 6 is broken. Where can i download PhotoShop Elements 6?

I lost my disk, the link on the site to download the trail for elements 6 is broken. Where can I download Photoshop Elements 6?
I was trying to install the trail because that was the only thing available and I have the product key. Can you please direct me to a link to download Adobe Photoshop Elements version 6 please.
Thank you,
Rob

Unfortunately, even if there were a download link it wouldn't help. PSE 6 had different serial numbers for downloads and boxed versions that were mutually incompatible, and back then you couldn't just enter a serial number into the trial. That's probably why adobe doesn't have a download available for PSe 6.

Error installing the Content version of Update rules

Hi experts,
While installing Update rule "0PA_C01 0HR_PA_0" from BI content following error is cming,
"Object Update rules E5ILYDNE80GVD52C5Y47ZBDKJ: Error installing the Content version."
Infocube , transfer rules are already installed. Datasource 0HR_PA_0 is also in place.
I have searched relevant quries in SDN.But i did not find the solution.
Could any one throw light on it?
Thanx and regards,
Ajit.

Hi,
Is there any log that is generated ? If so you can check for the reason for failure. You can also post the details, which will help us to understand the issue better.
regards,
Gaurav

I have just installed the Firefox update version 3.6.10. But the menu features in the Indonesian language. How can I change it into English.

I have just installed the Firefox update version 3.6.10. But the menu features are in the Indonesian language. How can I change it into English.

Download the English version of 3.6.16 from here and install it over your current version.
http://www.mozilla.com/en-US/firefox/all-older.html

Errors while installing Business Content

Hi,
It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
Now when I am trying to install I am getting these errors
Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1
Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
InfoPackage no longer exists in object version A in table RSLDPIO
There many errors of this type.
How to solve the problem. Please help me.
Thanks in advance.
Jaswantha

Hi Jaswantha,
Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
This is as per my observations so far according to SAP Best Practices.
Pls. try this and get back.
Hope it helps
Regards
PPMM

Installing Business Content directly in QA and PRD or transport it ?

Hello,
We have been running a SAP BW Lanscapce (7.01 SPS7) for over two years.
We have recently applied to our BW Landscace an additional add-on ; SAP SuPM (Sustainability Performance Management 2.0)
Several thousands of new objects are delivered and we need to install the SUPM Business Content.
A specific BC installation procedure is described in the installation guide, use the report report RSO_BC_INSTALL_ALL and not the transaction RSORBCT.
I intended to activate the SUPM Business Content directlly in DEV then QAS then PRD, as we did when we initially installed tthe three systems.
The develpent team would prefer to tranfor the transport the newly installed objects fronm DEV to QAS and PRD. They told me that activating directly the BC in QAS and PRD might cause issue for certain objects like transformations. During activation certain objects receive a unique ID hence receiving a different ID in each system. This would mean that we wonu2019t be able to transport changes to these objects from dev and that each change would need to be applied directly in each system which is not acceptable.
I am not confortable transporting thousands of new objects (even if they are collected in the same transport requests) from DEV to QAS and PRD.
What are you suggestions ? HAve you already been confroncted to the same problem, having to install thousands of new Business Content objects on an existing BW system ?
Thank you for your attention
Best Regards

Hi Shiro,
There is one important thing that you should note down is, if you directly install the contents in production system and something goes wrong due to customization or any other thing then there is risk of recovering it and being production system I would say not to do that.
Where as if you install the contents in development then you will have chance to do the unit testing properly and then send the contents to quality and prod after testing and modifications if required. The risk of failure with transport is very less if the transports are moved in correct sequence.
Regards,
Durgesh.

How to install business content Info Objects..

Hello all.
I am trying to do some BW extraction in our sandbox. Unfortunately I dont know how to install BC infoobjects. I have searched thru this forum but am still not fully sure. I have the source system client connected to BI. I replicated the datasources and see a ton of datasources under the UNASSIGNED NODES tree.
Eg: How do I install the InfoObject 0Material. Can somone tell me steps..I think I can figure out the rest after that.
Thanks in advance.

Hi
The Data Warehousing Workbench for installing BI Content has three navigation windows:
In the left-hand window you determine the view of the objects in the middle area of the screen.
In the middle window, you select the objects that you want to activate.
In the right-hand window, you make the settings for installing the BI Content. The right-hand window also contains an overview of the objects you have selected, and it is here that you start installation of BI Content.
In the Data Warehousing Workbench, you use the Navigation Window On/Off pushbutton in the toolbar to display or hide the left-hand navigation window. The rest of this section assumes that the left-hand navigation window is displayed.
2. Assign Relevant Source Systems
If you want to assign a source system, select the Source System Assignment function. The Choose Source System by Default? dialog box appears.
Select one or more source systems by setting the corresponding indicators in the Default Assignment column.
Only ever select the source systems that you really need, otherwise you may have to wait unnecessarily when objects are collected.
The assignment of the source system is only relevant for source-system dependent objects (such as transfer rules, file DataSources, and InfoPackages). If more than one source system is available, only those objects assigned to the specified source system are collected ready for the transfer. Objects that have not been assigned to the specified source systems are ignored.
For more information about the special features inherent in activating process chains that can reference source-system dependent objects, see the Customer Content documentation, under Process Chains and Process Variants.
If you do not select a source system, all the source systems are assigned automatically. You can change your selection later using the Source System Assignment function.
3. Group Objects To Be Included, Determine Mode of Collection for Objects
Make the settings you require from the following selection lists on the right-hand side of the screen:
Grouping
Choose the objects that you want the system to include. The groupings combine the objects from a particular area. You have the following options:
Only Necessary Objects (default setting)
Data Flow Before
Data Flow Afterwards
Data Flow Before and Afterwards
If you change the default setting (Only Necessary Objects), the new setting becomes the default setting for your user.
The grouping selection has an impact on system performance during BI Content installation. For more information, see View of Objects and Object-Specific Recommendations.
Collection Mode
Select how you want to collect the objects:
Collect Automatically (default setting): The data is collected when the objects are selected.
Start Manual Collection: The data is only collected when you choose Collect Dependent Objects.
Set the collection mode to Start Manual Collection. You can select all the objects without having to wait.
4. Determine View of Objects
In the left-hand navigation window, specify how you want the objects to be displayed. For more information, see View of Objects and Object-Specific Recommendations.
5. Transfer the Objects to Collected Objects
In the central area of the screen, select the objects that you want to install, and drag and drop them into the right-hand Collected Objects area of the screen.
The Find Object function allows you to use strings of characters (for example, 0CUST) or wild card searches (for example, 0CUST_*B) to search for objects.
Input help is available for every type of object: Double-click on the Select Objects icon in the tree structure of the corresponding object type to display the Input Help for Metadata screen. Select the required objects. Choose Transfer Selection.
If you implement BI Service API Releases lower than 7.0 in the source system, you have to install the active version of the BI Content DataSources in the source system and replicate them in the BI system before you can use them for transferring data into BI. For more information, see Installing BI Content DataSources and Metadata Upload for SAP Systems.
In the Collected Objects area of the screen, the system displays the selected objects and all dependent objects. Collected objects are stored by default in the repository cache. This reduces the time it takes to access these objects when you want to use them again.
When you transfer objects into the Collected Objectsarea of the screen, these objects are also added to the tree structure of the corresponding object type in the central area of the screen and stored for your user. This personal object list can be called up each time the program is restarted.
If you want to remove objects from your personal list, select the objects that you want to remove and choose the Remove Object from Display option from the context menu or click on the icon.
Objects that are listed in several tree structures can only be changed in the place where they first appear. All additional instances of these objects are grayed out so you cannot modify them.
6. Check Settings for Collected Objects
Check the following columns in the Collected Objects area of the screen:
Install
The following BI Content objects are highlighted in this column by default:
Objects that are being transferred for the first time. There is not an active version of these objects in the system.
BI Content objects that have been redelivered in a new version. These objects can be identified by the Content time stamp in the corresponding object tables.
When setting this indicator, check whether the checkbox refers to a folder of an individual object: If the checkbox refers to a folder, the indicator is set for all the objects that belong to this folder. If the checkbox refers to an individual object, the indicator is set for a single object and the indicators for the other objects in the folder are not changed. The same applies if you deselect this indicator.
In the context menu, the following options are available for the installation:
a. Install All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Install.
b. Do Not Install All Below
The Install indicators are deselected for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy.
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
Note that the InfoSource TRCS supports the match, but the 3.x InfoSource ISTD does not.
From a technical point of view, the SAP delivery version (D version) is matched against the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. If you are sure that the object will be used in the same way after you install BI Content, you can perform an automatic match for those properties. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be copied from the delivery version.
Assign points if useful.
Thanks & Regards,
Hari

How do I remove the "Revised" version on a Characteristic ?

Hi All
On a BI Content characteristics we have applies some customisations. The characteristic was saved and activated. It is used in a few InfoCubes and as a Reference Characteristic. This has been transported all the way through to production and is populated etc. The active customised version of the characteristic is as required.
In development someone has imported some BI Content that has modified the characateristic and the customisations have been removed. The changes are have a "Revised" & saved status.
We need to remove the "Revised" version.
Any suggestions ?
I look forward to getting some solutions
Kindest regards
Karen

Hi Pavan
Thank you for your quick reply
I want to stay with the Active version (i.e. delete all of the changes). Just to check, I need to do the following -
1. go into change mode
2. in menu "Characteristics", select menu item "Return to Active version"
I hope it is this easy as I have identified a number of InfoObjects that have accidently been updated with BI Content.
Please confirm that these are the correct steps.
Kindest regards
Karen

Installing Business Content and Merge - Overwrites InfoSource - Very Urgent

Hi Gurus,
I was installing Business Content for a Cube with the grouping Data flow before using Merge/Copy option in DEV.
The cube got activated and all the objects associated with it. What I didn't realize was that the InfoSource used for the DSO of the cube was also used by a custom DSO which has already been deployed in QA.
So the transfer rules were only partially maintained and the content InfoSource merged with the active one. The DataSource for the custom DSO is from QA (a different R/3 from DEV R/3). The issue is that the custom DSO in QA is now linked to the installed (new) InfoSource belonging to the DataSource of the DEV R/3.
Please kindly guide on:
1. How to change the InfoSource for the custom DSO from the currently installed one to the original one? Can I deactivate the update rules and create new InfoSource and transfer rules for the custom DSO and transport it again to QA?
2. What are the implications this might have on the newly installed DSO & Cube?
All answers will be suitably rewarded.
Thanks,
Swetha

Hi Swetha,
I am not too sure, if i understood ur problem correctly but,
If your BI QAS system is still good.. that means ur custom DSO is still linked to old version of Infosource in BI QAS.
The talk to ur BASIS guys and ask them to transport the Insource/Transfer Structure from BI QAS system to BI Dev system.
This can be done by creating a transport in BI QAS system, the type of transport should be Transport of Copies.
and also before importing this Trasnport from BI QAS in BI Dev System maintain an entry in BI Dev system RSA1>Tools>Conversion of Logical System names and put an entry as Source = ur BI QAS Logical System Name and target as ur BI Dev Logical System name.
Cheers
CK

Can I install OSX Tiger server version on my G4 Powerbook?

Hi everyone...
I cannot find the disk(s) for my Powerbook G4 (1.67GHz PPC)... so I've resorted to purchasing them. I found (on ebay) a set of disks being described as such: "Apple Mac OS X Server 10.4 Tiger M9769Z/A (PPC)"
My obvious question is... will this work on my PB G4?
I'm attempting to clear out the laptop and give it away but would like to re-install the OS for the new owner (a neighbor's teen getting started in music with Garageband)...
Any quick advice? Thx...

You may be able to call AppleCare directly to ask an OS X specialist about the availability of Replacement DVD system discs for Tiger 10.4, and Leopard 10.5, with white labels, for supported PowerPC macs; these were available and cost about $20. each DVD. These may not be available still, and knowledge of their exact availability may also be limited; if not plain unavailable (again.) They'd need the PB's serial number & method of payment, if they have the discs available I'd get both 10.4 & 10.5. And look online for iLife '05 or other.
If an OS X Tiger Server 10.4.x is older than a retail version which may have shipped with a computer when new, it may not work in that computer. You could try the installer, to see if it would, but it could be rejected, or fail part way into the process. So, in those instances, a retail OS X install DVD of later version is the path to installation, if you can't get the grey original install-restore disc set the computer shipped with. They have part numbers.
The server edition is a bit different than retail Tiger 10.4; you can see some versions of Server 10.4 Tiger as listed in the downloadable freely available MacTracker.ca database that works offline...
{from http://mactracker.ca downloaded database OS X Server 10.4 Tiger}
Note the above list ALSO shows PowerPC and Universal for Intel-based Mac.
+System discs that shipped with a Mac, be it PPC or Intel, do not interchange.
The company welovemacs seems to have a similar Server version Tiger 10.4 with like product number and it does not say it can't work on specific PowerPC Macs (there is an Intel version, won't work in PPC) so for comparison here is there link: http://www.welovemacs.com/m9769za.html
Server versions of OS X can run in machines the standard one can, with a few exceptions in hardware; or in situations where the OS X version is older than the computer, so compatibility with hardware is lacking. In some cases, the installer may work OK, but would need additional Software Update to fully work, so the Combo update 10.4.11 may help.
There are some applications that may be missing from a retail or server edition of Tiger (or Leopard, etc) that would have been included in the computer's original as-shipped system and backup restore/install DVDs. The iLife applications would be on a separate retail disc set, a later iLife version than shipped with Tiger in a computer may be used in Tiger; to a limit. There (or was) a Support article on vintage iLife versions and OS X system they were supported in. Some bookmarks fail and links have changed, content moved or removed.
Several PowerBook 1.67GHz models exist, some shipped with Tiger 10.4.2 variants on their own DVDs so the Tiger Server would likely need to be later than 10.4.3 to work. But it would be worth a try, if you have it. Could be it may install (or not) but if it does, it may run in SafeBoot, and accept update to 10.4.11 Combo. Or you may be looking for a different installation DVD.
There may be a way around this, if you have a second Mac that can use the Tiger Server, and use it to install into the PowerBook, in Target Disk Mode, and see if it can accept the Combo update, then boot up. Not sure if this idea would even work. Been awhile and my target disk and firewire experiences are rusty!
Not sure if this helps...
Good luck

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

I installed the new iTunes 11.1.4 with windows and when I plog in my new iPod, I get a warning notice telling me to install the 64-bit version, how do I fix this problem?

Please Help I don't know what to do
I just installed the new iTunes 11.1.4 and when I plug in my iPod touch, it sends me a warning note
telling me that the requested software is not installed, to uninstall iTues and install it again with the 64 bit version
I've already tried it but the same thing happens

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

HT4623 latest iTunes will not recognize new iPod. i get message "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." 64 bit version of iTunes is inst

I have a new iPod Touch 5th gen. My computer works on Windows 7. Latest ITunes gives me this message: "this ipod can't be used because the required software is not installed. Run the iTunes installer to remove iTunes then install the 64 bit version of iTunes." I have already removed and reinstalled a couple of times--making sure to remove all the related applications as well--Bonjour, Apple Software update, Apple Application Support. Help!

(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

HT1222 I have a new pc with windows 7 and cn no loner connect myniphone or iPad says cannot be used because the required software is not installed run the iTunes installer to remove iTunes then install the 64 bit version ofnitunes where do I find that lin

How do I upgrade my iPhone 4s and mybipad to the windows 7 64 bit version of iTunes

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Install BI Content - Revised Version equals Delivered (Changes lost)

Similar Messages

Maybe you are looking for