Install error: J2E already exists

I had to abort my first installation of the Java Sneak Preview, because my C: drive was running out of space. I am using a 2nd disk for the database. After carving out some more room on C:, I tried to cleanly and thoroughly wipe out all traces of the failed install before trying again. Unstalling MaxDB from Windows's Add/Remove Programs wouldn't work (I don't remember the exact error, but it was running the uninstall script with -all and reported it couldn't do this because I needed to get rid of an instance first ???). Since the database was on my removable D: drive, I finally got rid of it the old fashioned way: I reformatted the disk. I also deleted any trace of "J2E" I could find in the Windows XP registry. Nevertheless, my retry of the Sneak Preview install fails on a sapdb_db_create statement, with the root problem as reported in XCMDOUT.LOG that J2E already exists:
> Subprocess starts at 20051107193441
Execute Command : d:sapdbprogramspgmdbmcli.exe -R d:sapdbj2edb db_create J2E CONTROL,CONTROL
Execute Session Command : exit
> Subprocess stops at 20051107193441
ERR
-24953,ERR_DBEXIST: database instance already exists
Since I literally wiped out the database, can anyone tell me where the installation is still detecting the existence of J2E? How can I get rid of all traces?
And since the initial problem I had was too little free disk space on my C: drive, and since I bought a second hard drive precisely to get around this problem, is it possible to direct not just MaxDB but the Was 6.40/J2EE Engine itself to my D: drive (it seemed to install on C:\usr\... without my having any choice in the matter)?

Roland,
That worked: After dropping the instance, I was able to cleanly deinstall MaxDB and try the Sneak Preview installation from scratch. I've rewarded points accordingly.
However, I then ran into another problem perhaps you can help with. I will explain it here, but please let me know if you would like me to post it in a new thread, so you can potentially get separate points for this one :-).
So here's the new problem: The installation hung during the 22nd task, Load Java Database Content. I let it run about 12 hours, before giving up, clicking Log Off, and rebooting my laptop. In jload.java.log, there are entries for the first couple minutes after that task began, then nothing. So after rebooting my machine, I crossed my fingers and tried to recontinue the installation, but I get an error, the root cause of which seems to be that the database needs to be restarted?:
java version "1.4.2_10"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_10-b03)
Java HotSpot(TM) Client VM (build 1.4.2_10-b03, mixed mode)
Nov 9, 2005 12:29:51 PM com.sap.inst.jload.Jload main
INFO: Jload -sec J2E,jdbc/pool/J2E,C:usrsapJ2ESYSglobal/security/data/SecStore.properties,C:usrsapJ2ESYSglobal/security/data/SecStore.key -dataDir D:/SP/NW04SneakPrevJavaSP11/NW04SneakPrevJavaSP11/NWSneakPreviewSP11/SAP_NetWeaver_04_SR_1_Installation_Master_DVD__ID__51030843IM01_NT_I386....SneakPreviewContentJDMP -job C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/IMPORT.XML -log C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/jload.log
Nov 9, 2005 12:29:52 PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://IBM-GIBBONS/J2E [Restart required].
Any idea why the 'load database content' task hung? (By the way, I have 1 GB of RAM - should be enough?) And should I manually restart the database and try to continue? If so, how do I manually restart the database from the command line?
(Again, let me know if I should repost this in a new thread. Thanks in advance.)

Similar Messages

Install Error: SID already exists

Hello,
I uninstalled 9i whose SID is, say, BLNG. Now I am installing 10gR2 and I'd like to use the same SID name. But install says:
The SID you have specified already exists on this machine. Please specify a different SID.
I need to use the same SID. How do I get install to accept a previously used SID? Which files / registry entries do I need to change or delete.
Thanks,
gk

It is much safer/better to drop a database before you uninstall Oracle software.
Now that you have uninstalled without dropping you need to clean every single trace manually since the uninstall was not legal or complete.
Before following these steps backup your PC and registry
1- start your PC in safe mode, delete the parent Oracle folder from your drive.
2- Restart in Normal mode.
3- Open the registry using regedit.exe from start/run/
4- delete from the registry the following entries/keys
HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE
HKEY_LOCAL_MACHINE/SYSTEM
Controlset001/services/%oracle_services%
Controlset002/services/%oracle_services%
Now you need clean the legacy entries from your registry.
If your OS is not Win XP you need to use regedt32.exe. If Win XP then use the regedit.exe.
To remove the legacy entries you have to be the Administrator and change the security on the legacy keys so you can delete it.
HKEY_LOCAL_MACHINE/SOFTWARE/SYSTEM/Controlset001/ENUM/Root/Legacy%Oracle_services%
and the same for Controllset002.
I suggest youd be VERY CAREFUL with the registry, one single mistake and bye-bye Windows.
and also drop the database with dbca before you uninstall the software, and use oradim to remove the services.
Hope this helps
Tony Garabedian
If you have other Oracle products installed on you machine, make sure you delete only the uninstalled database entries/keys from the registry.
Message was edited by:
Tony Garabedian

Error message Already exist

Adobe Reader still having problem installing adobe reader still getting a error message already exist Windows 7 PC

Hello,
Please use the Acrobat cleaner tool - http://labs.adobe.com/downloads/acrobatcleaner.html
~Deepak

Error 'Domain already exists. Delete all records'

Hello, I am having an issue with transferring my domain name. Keep getting the error 'Domain already exists. Delete all records'. I assume this needs some kind of cashe flush but not quite sure how to do it!
Any help would be appriciated,
Thanks,
Callum

Hi Callum,
What is the domain name and to what site are you trying to add it to?
Regards,
Aish

As I try to load adobe photoshop elements 12 I get error "object already exists"

As I try to load adobe photoshop elements 12 I get error "object already exists" does anyone knows why?

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

Blu-ray error:"file already exists", code "6" , Note : 118240 11771552 11826176

It has been a 3 days that i have try to make Blu-ray .ISO image on Encore CS5, i always have that message: Blu-ray error: "file already exists", code "6" , Note : 118240 11771552 11826176. Everything seems to work fine before.
Windows 7 Ultimate 64bit,
Intel Core i7-2600K Sandy Bridge 3.4GHz,
CORSAIR CWCH50-1 High Performance CPU Cooler, ASUS P8P67 PRO,
G.SKILL Ripjaws X Series 16GB,
EVGA GeForce GTX 460 (Fermi) 2GB ,
Matrox MXO2 with MAX,
COOLER MASTER HAF 932 Black ATX Full Tower Computer Case,
Adobe CS 5 Production Premium
thanks in advance

Thank you ram8kumar. I will answer step-by-step, as you did:
- there is no subtitle in the project
- .PSD file is not to large, 2 files 1920X1080 and only 2-3Mb, and they only used as menu (I did this a milion times before), there is no slideshow in the project
- Disc name is not blank
- there is no sledeshow (burning a slideshow with no pan and zoom or with no transition with H264 settings)
Lest two might be the problem.
- I exported .h264 files from PPro CS5 with Matrox MXO2 Mini with MAX, Matrox preset and if I remember right target was 30Mb/sek
- Audio and video track duration in the timeline was 1(one) frame difference.
Thank you agan, and I will post the results as soon as I will get done with it.
Vladymyr.

Error: Column already exists

Hi,
when i'm giving 10 in a addon field it creating 10 column in matrix and when i'm edit and giving 25 its not creating 25 column. Its telling the following Error: Column already exists. How to check the column already exists or not in matrix or Is there any alternative solution?
Thanks and Regards,
Sudhir B.

Hi
Problem Solved....
Thanks and Regards,
Sudhir B.

Need help - Deleted domain and can't re-add - Error domain already exists - Site down

In trying to reconfigure our domain setup, I removed the main domain name in an attempt to re-add it so that it does not point to an external DNS server.
I deleted the domain and now when I try to re-add it, I get the following error:
Domain already exists. Please delete all records associated with this domain before re-adding it.
I have no way to submit a ticket when I go to help and support and our site is now down from the main page. I need help ASAP.
I was able to submit a case when I switched browsers (Chrome apparently does not display the search bar/case submission). The case is
OBNW5020171
The domain I am trying to re-add is surfaid.org

Hi,
I just wanted to followup to see how this case is progressing. This is
very URGENT as our main URL is down and we are in the final stages of a
major campaign where participants have been instructed to go to our website
to sign up which could result in a loss of a lot of donations.
Any priority this can be given would be very much appreciated.
Thank you!
Emily Taylor
On Wed, Jan 9, 2013 at 11:25 AM, Sidney Mitchell

A/R invoice update error-Entry already exist in ado4

Hi all,
Currently I am using version PL39 when i am trying to update my A/R invoice its giving following error -This entry already exist in following table ado4[message 131-183].
As per my knowledge ado4 is history table for A/R invoices.
Kindly help me.. why this error is coming and how to resolve this error.
Thanks in advance,
Regards,
Jitendra Sali

Jitendra Sali,
I would suggest you escalate this to SAP Support as you wait for an answer from this Forum.
Suda

Installing Bootcamp onto already existing drive

Looking to install Bootcamp then WinXP onto an already existing MacBookPro that is in daily use. Can this be done w/o having to backup, wipe clean and restore my Mac side?
I will of course backup my Mac data just to be safe, just wondering if I have to reformat my entire internal drive just to set up a Windows partition?
TIA

That is exactly how it is done and that is WITHOUT having to wipe out your Leopard installation. You would run Boot Camp while in Leopard and create a Windows partition on your current HD. Ensure that you have enough space to do so.
The installation guide (which you should print out and read) is available [HERE_|http://manuals.info.apple.com/en/Boot_CampInstall-Setup.pdf].
Axel F.

Another save for web devices error - File already exists?

I've been using the same Photoshop CS4 on Windows 7 for about a year now, and only now this problem occurs to me.
Whenever I try to preview gifs in any browser (tried a few), I get the error message "Could not complete this operation. A file by this name already exists."
Tried renaming the files, replacing them, creating new ones, tried to enter preview on old files that previously worked, but always get the same error message.
I did some research and tried deleting both the main Save for Web and Devices pref file, and the other so called "hidden one" in the plugins folder. I've tried reinstalling photoshop from scratch. Nothing works.
Please help me. I'm near desperate :/

Ah, sorry, now I see what you're doing.
I haven't had the issue myself, but I can guess that one or more of the temporary files it needs to create in order to show them in your browser must be failing in creation. Check the permissions on the folder identified by your TEMP environment variable - you should have Full Control of your TEMP area..
Specifically, it creates a "Save for Web" subfolder there. You might be able to delete that entirely in order to start afresh.
Just to test, I've opened Photoshop CS4, entered Save for Web & Devices, and pressed the Preview button myself and it worked okay here... Your TEMP area is likely different than mine.
-Noel

ERROR ENTRY ALREADY EXIST

WHEN I CREATING NEW BP AS CUSTOMER,AT THE TIME OF SAVE RECORD ERROR MESSAGE SHOW THAT :-ENTRY ALREADY EXIST.
I HAVE UNIK BP CODE(IT IS NOT IN DATABASE)
Edited by: Sandeep Sharma on Aug 2, 2008 1:36 PM

HI,
The Business Partner code cannot be the sames as G/L Account code, otherwise the Financial Booking is not working.
Example:
> G/L Account Code: 11010000
> You are not able to add a BP with code 11010000.
You can test with the following query:
SELECT AcctCode,'G/L' as Place FROM OACT T0 WHERE T0.[AcctCode] = N'[%0]'
UNION ALL
SELECT CARDCODE, 'BP' as Place from OCRD T0 where T0.[CardCode] = N'[%0]'
Regards,
J.

RFCFILE7: Different Error messages on the same error: BP already exists...

Hi,
migrating Business Partners with the RKCFILE7 Direct input program gives 3 different error messages in case that the BP already exists:
1. BP & already exists in role BCA010
2. BP with external number & already exists
3. Data record to be created is alrady available in table BUT000
The strange issue is, that migrating same BPs twice the error log gives for each BP one of these 3 error messages.
However all 3 messages are valid for all BPs (they all exist).
Any idea?
Thanks
Thomas

does not matter anymore

Installing PIP on Already existing FP

Hi ,
Can we install PIP(Version 2.0) on already existing FP(Version 2.0). will the setup wizard skip FP installation if AIAFP is already installed .
Thanks
Mohan

Hi Mohan,
You may install PIP and FP separately for AIA 2.x and future PIPs. However, the version 2.0 PIPs were not installed on top of a Foundation Pack. Could you please share which PIP you are trying to install. Please feel free to email me offline and we can discuss. (rohit.x.agarwal at oracle dot com).
Regards
Rohit

[SOLVED] Install to BtrFS already existing (but empty) subvolume

I currently have a Btrfs filesystem made up of /dev/sda5 and /dev/sda6. On that filesystem, there is an Ubuntu 11.10 install in the @oneiric_main subvolume and a data subvolume (with Ubuntu /home) in the @Data subvolume. Grub2 is installed in the @oneiric_main subvolume and works fine.
I would like to install arch to a new subvolume on the existing BtrFS filesystem. I would probably make a subvolume named @arch_2011.08 to install it on. (@arch is taken--I already tried to do this myself, installing using pacman -r <subvol_mount_point> -Sy base --ignore grub. Didn't work, has no initrd, kernel panics with VFS not syncing error) I would like to then boot Arch with Ubuntu's Grub2 since that install is working off BtrFS. How do I go about doing this?
On the install that failed, I generally tried to follow https://wiki.archlinux.org/index.php/In … Btrfs_root, but I didn't really need/want automatic snapshots, so I didn't think I wanted to install mkinitcpio-btrfs. For it my Grub2 entry is
menuentry "Arch (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod btrfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root d551dbac-3c7f-4f8f-a0d4-2d1f242cc42f
linux /@arch/boot/vmlinuz-linux root=/dev/disk/by-uuid/d551dbac-3c7f-4f8f-a0d4-2d1f242cc42f rootflags=subvol=@arch ro
I've tried to chroot to the Arch install from Ubuntu and run mkinitcpio, but that gave an error that some directory was not valid. The directory it complained about had the Ubuntu kernel version in its name, so I figured I was doing something majorly wrong. Edit:I suppose it would help if I updated the /etc/fstab. I did, but I still get the same error. The first line is "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)"
I'm not sure if I should try to fix the first install or just start again. Either way would get the goal:Arch installed on the BtrFS subvolume, booted with Ubuntu's Grub2.
Last edited by Azendale (2011-12-17 22:34:16)

@Teekay:I did mount /proc, /sys and /dev into the @arch subvolume before chrooting.
Here's what happens when I try to chroot into the Arch install to make an initrd:
[root@dynl:~]# mount -o subvol=@arch /dev/sda5 /mnt
[root@dynl:~]# cd /mnt
[root@dynl:/mnt]# mount -o bind /dev dev
[root@dynl:/mnt]# mount -o bind /sys sys
[root@dynl:/mnt]# mount -o bind /proc proc
[root@dynl:/mnt]# chroot .
chroot: failed to run command `/bin/zsh': No such file or directory
[root@dynl:/mnt]# chroot . bash
bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
[root@dynl /]# ls
bin dev home lib64 mnt proc run srv tmp var
boot etc lib media opt root sbin sys usr
[root@dynl /]# mount
/dev/sda5 on / type btrfs (rw,relatime)
udev on /dev type devtmpfs (rw,relatime,size=693104k,nr_inodes=173276,mode=755)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
[root@dynl /]# mkinitcpio
/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
==> ERROR: '/lib/modules/3.1.0-030100rc10-generic' is not a valid kernel module directory
Update: I've made progress. Instead of chrooting from Ubuntu, I chooted from the arch installation live image. I was able to run mkinitcpio -p linux. I added an initrd line to grub2:
menuentry "Arch (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod btrfs
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set=root d551dbac-3c7f-4f8f-a0d4-2d1f242cc42f
linux /@arch/boot/vmlinuz-linux root=/dev/disk/by-uuid/d551dbac-3c7f-4f8f-a0d4-2d1f242cc42f rootflags=subvol=@arch ro
initrd /@arch/boot/initramfs-linux.img
The new error is :
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: Starting udevd...
done.
:: Running Hook [udev]
:: Triggering uevents...done.
Waiting 10 seconds for device /dev/sda6 ...
mount: mounting dev/sda6 on /new_root failed: Invalid argument
ERROR: Failed to mount the real root device.
bailing out, you are on your own. Good luck.
sh: can't access tty; job control turned off
[ramfs /]#
Also, the Arch /etc/fstab is:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=d551dbac-3c7f-4f8f-a0d4-2d1f242cc42f / btrfs defaults,subvol=@arch 0 0
Last edited by Azendale (2011-11-05 06:43:49)

Install error: J2E already exists

Similar Messages

Maybe you are looking for