Install issues on Fedora FC2

Alrighty:
I've been searching for a complete solution for a day now and it is time to post.
Installing as a regular user ie. not root gives the following:
[user@workstation /home/user]$ ./creator-2004q2-linux-ml.bin
InstallShield Wizard
Initializing InstallShield Wizard...
Preparing Java(tm) Virtual Machine...
Running InstallShield Wizard...
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
The installer is unable to run in graphical mode. Try running the installer with  the -console or -silent flag.Responses on other websites I've researched say 'Don't run X as root' and true, ps aux | grep X shows root running the X server. X has to run as root to access hardware related stuff, so I'm not sure this is good advice, as there was not a solution offered to change this.
Also, I noticed about 20 open streams via "netstat" called 'orbit-username'. Does JSC use CORBA and if so, why would these be here after a complete removal of all Creator/ and .Creator/ directories?
Thanks y'all,
Tim

Solution:
I had tried using -silent at the install command line:
[user@workstation /home/user]$ ./creator-2004q2-linux-ml.bin -silent...as recommended by the error I was receiving listed above, but still without success.
Then I read deeper into the Installation FAQ regarding silent install at: http://developers.sun.com/prodtech/javatools/jscreator/reference/faqs/index.jsp#silent:
In short, you create a tiny config file with the same name as the installer only with an '.sp' extension with the minimum contents:
installDir="/home/user/Creator"
serialNum="serialnumgoeshere"This worked nicely and in fact was not 'silent' per se as I still was shown the installer (strange) but it worked and I'm fully installed.
Fedora Core 2 (FC2) may do something differently with the X.org implementation of X11, or perhaps it is related to the new kernel.
Tim

Similar Messages

  • Install MyEclipse In Fedora 9

    Hi,
    I am using Fedora 9. I am very new to Linux platform.
    So can anyone please help me to install MyEclipse in Fedora 9 environment.
    I have Eclipse 3.2 and MyEclipse 5.1 with me which i used with Windows.
    Can i use the same in Fedora.
    Can anyone please help me to solve this issue..
    Thanks in advance....

    This forum is for people needing help with writing their Java programs. You probably would get better help on a MyEclipse site.

  • SP2010 Foundation Post Install issues on development workstation - Database and Services

    Just recently installed SP2010 Foundation for a development workstation.  Platform isWin7 X64 pro, SQL 2008 (Developer edition)
    (1) Looks like search has some configuration issues.  This is in the Windows event log
    The Execute method of job definition Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition (ID 38eefca2-d092-47f4-a833-23f8280c5f63) threw an exception. More information is included below.
    The device is not ready.  
    (2) In Central Admin > Servers in Farm
    Status - "Upgrade Available", 
    (3) In Central Admin > Manage Database Upgrade Status
    Sveral of the Datbase(s) mention that upgrade is recommended, but one in particular mentions that the DB is too old?
    WSS_Search_GHHTY
    SPSearchDatabase
    Database is too old and upgrade is required
    Huh?  
    (4) Looking at my local SQL 2008 instance that SP2010 created, I see several DB's with "Config" in the name along with a guid on the end of the name.  Is the result of re-running the configuration wizard several times while
    I was correcting install issues?

    here is question, i am assuming its fresh install not upgrade...
    when you run the config wizard( you mentioned many times), which option you select from 2nd try to on ward....cannot disconnect this server from farm?
    are you using any script to install ?
    I would say run the config wizard without disconnecting and this server will host CA option.
    from the central admin > manager server in farm...on top you will see farm version and config database name. note it
    from the Manage database Upgrade status page note all the db names
    now match it on sql and keep those and all other should gone now as a clean process.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Mac OSX: Flash CS3 Font Install Issues

    Hi,
    I have a Mac Powerbook G4 with OS X installed and Adobe CS3.
    I've installed a font. The font works in Photoshop and Illustrator
    but not in Flash CS3. Why? I've put the font in the Library/Fonts
    folder and the User/Fonts folder and it still doesn't show up in
    Flash. Apparently this is a problem for a number of people see
    another forum here:
    MAC
    OSX: Flash CS3 Font Install Issues Forum
    Please let me know what to do to fix this. I need to be able
    to work with the font in all three applications Flash, Photoshop
    and Illustrator.

    Hi davidd61713525,
    Sorry for not getting back to you sooner.
    Unfortunately, it looks like something is wrong with the file system and the installer can't see the root drive to install to.  A Google search returns numerous results affecting various products and the recurring theme is that something is wrong with the disk.  There are many recommendations from various sources, but nothing definitive.
    Here's a similar thread over on the Apple forums:
    Broken Installer Permissions | Apple Support Communities
    And a similar older one:
    http://forums.macrumors.com/showthread.php?t=1203509
    I would try the following options:
    Try using the PKG installer. This is used Mac SysAdmins to install Flash Player within their organization and uses a slightly different installer path, which may or may not work.
    Some people have had success with disk and permissions repair some have not.  You can try running a disk and permissions repair.  After the disk and permissions repair is complete, reboot the system and try to install again using either the online installer (get.adobe.com/flashplayer) or the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page in the ‘Still having problems’ section.
    If these options do not work, I'd reach out to Apple support to see if they have a suggestion.  If you do find a resolution to this, please let me know.  I'll be happy to share it with people that encounter the problem in the future.
    Maria

  • Re-Installing Issue

    Hi,
    I have a G5 I had to re install and erase my HD cause I had issues, now that i am rebuilding the system it won't let me install FCS, I get to the DVDP disc and it says Installation failed.... I tried it a few time and I get the same error. Can anyone shed some light on this please?
    thanks
    P

    Welcome to the forum!
    Made sure the disks are clean? I'd call Apple on an install issue if it's new or if you suspect a damaged disk and you're the registered user.
    Which OS are your running? QuickTime Version?
    Jerry

  • Webutil install issue

    Hello,
    I have a strange WebUtil install issue on 10gIAS 10.1.2.0.2. I downloaded the 1.0.6 WU version and put it into a webutil directory under forms (which the pre-configuration of AS seem to assume) and when I call the forms servlet with ?config=webutil the "RegisterWebUtil - Loading WebUtil Version 1.0.6" shows but the main applet doesn't load. The webutil HTML template is found and looks OK in View Source but no applet. The config section has a archive_jini but it behaves as if the main jar can't be found(?) Nothing extra in the jinit-console, even at log level 5. webutil.cfg is copied to forms/server and frmwebutil.jar to forms/java.
    Suggestions appreciated,
    Nik

    Hi,
    Can you check Vitual Path of WebUtil in the config file ..\forms\server\forms.conf?
    I would like to see your files
    ..\forms\server\default.env
    ..\forms\server\forms.conf
    BACH

  • I was trying to activate my CS3 and got help from chat until he said it was an installing issue. The application opens and then closes unexpectedly.

    I just got a new mac and I'm trying to download my Adobe CS3 onto it. I was able to download and then I tried to activate it. I entered the CS3 serial number and then asked for the serial number of the older version. I originally bought CS2 on disc and downloaded it onto my old mac and from there bought an upgrade to CS3. I no longer have the discs or box for CS2 and so I do not have the CS2 serial number. I contacted chat support who helped until I reached the point where I could open the application but then it would quit immediately and say "Adobe Update quit unexpectedly." Then he said it was an installing issue and turned me to the forums. Help, please?

    JohnEden I would recommend running all available uninstallers to remove the current installation.  The uninstallers are located in the Applications/Utilities/Adobe Installers folder.  Once you have ran the uninstallers then please also utilize the CC Cleaner Tool for a complete removal.  You can find details on how to utilize the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  • Error when installing issue in Content Viewer

    Hi,
    I have a strange error in my Content Viewer.
    When downloading it stalls and a message says "Could not install issue, relaunch app and download your purchase again" (my translation from swedish).
    It sometimes stalls when downloading and sometimes when installing issue.
    Anyone got a solution or having the same problem?
    Br
    Henrik

    Henrik, this can be either or. The internal Acrobat.com servers seem to have download issues once a week or so.
    The best way I think you can determine this is if the download is failing at the same point during the download. If it is, it's a problem with the folio. If it's not, then it's a temporary problems with the servers.
    If it is a problem with the folio, there's no straightforward answer -- but if you were able to download that folio recently, delete or update the articles you've added since.
    If you have no idea what's causing it, you can either start deleting articles, or try updating them first.

  • CS5 install issue? only appears to be a frame instead of filling the scree on Mac osx

    CS5 install issue? only appears to be a frame instead of filling the screen on Mac osx
    When I click on the middle it takes me back to the desktop

    Hi,
    I would recommend posting this query in the Adobe Photoshop forum.
    You will get a specific response relevant to this question.
    Thanks

  • Installing flex on fedora 7

    Can some one help me out how to install flex on fedora.

    so you need Flex Builder for linux.
    download it from
    http://labs.adobe.com/downloads/flexbuilder_linux.html

  • Installing oracle10g on Fedora fails

    Hi,
    I gave up trying to install oracle9i on Fedora. But when I
    tried to install 10g on fedora today, I ran into the same
    kind of errors as with 9i.
    I have read puschitz and oracle-base as well as other docs
    and I also pass the pre-requisites test of the OUI
    I am now confused as to why everytime I get to the linking
    stage, the following do not link:
    ins_precomp, ins_sql, ins_ldap, ins_rdbms, ins_nau, ETC...
    (9i Note: The fixes in puschitz's page for ins_precomp and
    ins_sql do not work for me nor do the fixes for
    ins_oemagent and inv_ctx) and there is no mention
    anywhere on the web for other errors like ins_rdbms, ldap,
    nau, and more..
    What could be the problem? Can someone assist please?
    Thanks

    I've successfuly installed oracle10g on Fedora core1 but before that I update all packages mentioned in
    http://www.puschitz.com/InstallingOracle10g.shtml to latest versions(using yup).
    Regards.

  • Can i install EBS on fedora???

    hi all,
    Can i install EBS on fedora??? it is build on RedHat.

    Hi,
    Please see "Oracle Certification Matrix".
    Oracle Certification Matrix
    http://www.oracle.com/technology/support/metalink/index.html
    Regards,
    Hussein

  • Install Ant on Fedora

    I downloaded apache-ant-1.6.0-42.src.rpm package. When i installed that package, i had two files ( apache-ant-1.6.0-42.src.tar.bz2 and apache-ant-1.6.0-42-optional.src.tar.bz2 ).
    I didn't see bin folder. So I extracted apache-ant-1.6.0-42.src.tar.bz2 file, i had apache-ant-1.6.0 folder. I couldn't see bin folder and i don't know how to compile and install it.
    If you know to install Ant on Fedora, please show me. Thanks.

    I think you need to talk to the TORA folks: http://torasql.com.
    -Andy

  • Install Raptor On Fedora Core

    Hi to all!
    I'm trying to install reptor on Fedora Core 4. I have installed jdk 5.0 ok and I have unzipped raptor ok too, but when I try to run I have this error:
    [root@biora raptor]# sh raptor
    Oracle Raptor 1.0
    Copyright (c) 2005 Oracle Corporation. All Rights Reserved.
    Working directory is /var/local/raptor/jdev/bin
    Exception in thread "main" java.lang.NullPointerException
    at java.util.Hashtable.get(Hashtable.java:333)
    at java.util.logging.LogManager.getLogger(LogManager.java:437)
    at java.util.logging.Logger.getLogger(Logger.java:228)
    at oracle.ide.performance.PerformanceLogger.<init>(PerformanceLogger.java:64)
    at oracle.ide.performance.PerformanceLogger.get(PerformanceLogger.java:94)
    at oracle.ideimpl.Main.main(Main.java:21)
    Somebody knows what's Wrong?
    Thanks.
    Mensaje editado por:
    user481184

    Have you asked this question in the Raptor forum? It's the forum where the Raptor developers and product people usually spend their limited free time.

  • INSTALL TORA ON FEDORA 13

    I want to install TORA on fedora and connect to oracle 10gR2..but i found error in installation
    error: Failed dependencies:
         libDCOP.so.4 is needed by tora-1.3.9.2-1.i386
         libkdecore.so.4 is needed by tora-1.3.9.2-1.i386
         libkdeprint.so.4 is needed by tora-1.3.9.2-1.i386
         libkdeui.so.4 is needed by tora-1.3.9.2-1.i386
         libkhtml.so.4 is needed by tora-1.3.9.2-1.i386
         libkio.so.4 is needed by tora-1.3.9.2-1.i386
         libkparts.so.2 is needed by tora-1.3.9.2-1.i386
         libqt-mt.so.3 is needed by tora-1.3.9.2-1.i386
    how do I overcome it??
    thanks

    I think you need to talk to the TORA folks: http://torasql.com.
    -Andy

Maybe you are looking for