Install of SCSM 2012 SP1 DataWarehouse Fails with PreRegisterExtensionsDeferred
Hi,
Trying to install System Center Service Manager 2012 SP1 DataWarehouse on Server 2012 and it's failing on Configuring Reporting with "An error occurred while executing a custom action:_PreRegisterExtensionsDeferred".
Looking in the logfile SCSMInstall01 we get these lines:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions
PreRegisterExtensions: Begin
PreRegisterExtensions: Starting in deferred mode
PreRegisterExtensions: 20 extension records decoded
PreRegisterExtensions: Connecting via InProc SDK
PreRegisterExtensions: Loading management pack C:\Program Files\Microsoft System Center 2012\Service Manager\System.Library.mp
PreRegisterExtensions: Importing management pack C:\Program Files\Microsoft System Center 2012\Service Manager\System.Library.mp
PreRegisterExtensions: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
PreRegisterExtensions: Parameter name: managementPack ---> : Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: XML parsing: line 9590, character 93, end tag does not match start tag
PreRegisterExtensions:
PreRegisterExtensions: --- End of inner exception stack trace ---
PreRegisterExtensions: at Microsoft.EnterpriseManagement.ManagementPackManagement.TryImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions: at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions: at Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions(Session session)
PreRegisterExtensions: End (fail)
Databases being installed on SQL 2012 (11.0.3128).
Any pointers to where I'm going wrong?
Thanks,
Niall.
Did some searching about this error. Some people say it's because SQL permission issue. Does the service account you are using have permission to the SCSM database-server and on the database-server where you are placeing the data warehouse (unless you are
placeing it on the same server)
Have a look at this post: https://social.technet.microsoft.com/Forums/systemcenter/en-US/63518cc4-089e-4d70-8bb1-a6e305c3db84/an-error-occurred-while-executing-a-custom-actionpreregisterextensionsdeferred?forum=systemcenterservicemanager
www.zgc.se - Sysadmin blog.
Similar Messages
-
Trying to Perform an install of SCSM 2012 SP1 - SQL Analysis Services Not Installed
I'm performing a clean install of System Center Service Manager 2012 on a Windows 2012 server. The prerequisite checker told me the Analysis Objects were not installed. I clicked the link and downloaded the SQL Server 2008 R2 Analysis
Management Objects. I restarted the install and it still says it's not installed. I also tried installing the 2012 version of the objects and still no luck.
I also tried installing both the x86 and x64 versions of these tools.
I have also tried the same install on a Windows 2008 R2 server and had the same error. I'm convinced this is a bug in the setup.
Has anyone else seen this? Is it a known issue?Try to check the log file SCSMSetupWizardxy.log under C:\Users\<username>\AppData\Local\Temp
perhaps it could not load Microsoft.AnalysisServices.dll assembly.
12:23:55:**************************************************
12:23:55:CheckPrerequisites: Checking Microsoft SQL Server Analysis Management Objects prereq.
12:23:55:Entered RequiredAMO
12:24:08:Trying alternate method of detection using Assembly.Load
12:24:08:Error occured while loading Microsoft.AnalysisServices.dll: Could not load file or assembly 'Microsoft.AnalysisServices, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
12:24:08:CheckPrerequisites: Logic Type:and AMO-err: 2
12:24:08:
12:24:08:CheckPrerequisites: Microsoft SQL Server Analysis Management Objects: Failed
12:24:08:
12:24:08:**************************************************
can you confirm if that assembly exists in the Assembly folder.
on a side note: SCSM 2012 SP1 supports 2008 R2 SP1 or above, and double check that the account you are using to install the SM is a local admin.
-
Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure,
review the log files.
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2014-04-10 11:51:11
End time: 2014-04-10 11:51:49
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine name: VMSPDB2
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: Australia
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database
Engine Services 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server
Replication 1033 Enterprise
Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text
and Semantic Extractions for Search 1033 Enterprise Edition 11.1.3000.0 No
Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data
Quality Services 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Basic 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
Client Tools Connectivity 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Integration Services 1033
Enterprise Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 1
KBArticle: KB2931078
KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
PatchType: QFE
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 11.1.3412.0
ProductVersion: 11.1.3000.0
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2012-KB2931078-x64.exe
Installation location: e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: false
CLUSTERPASSIVE: false
CONFIGURATIONFILE:
ENU: false
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCEID: <empty>
INSTANCENAME: <empty>
QUIET: false
QUIETSIMPLE: false
SQMREPORTING: false
UIMODE: Normal
X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
HResult : 0x80131500
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
HelpLink.EvtType =
0xB2652E58@0xDC80C325
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: System.ComponentModel.Win32Exception
Message:
Not all privileges or groups referenced are assigned to the caller.
HResult : 0x80004005
Error : 1300
Stack:
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey
key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey
machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action: InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are
assigned to the caller.
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess
registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView
regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: --- End of inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the following file to Watson reporting: C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01) 2014-04-10 11:51:39 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp: Data:
(01) 2014-04-10 11:51:39 Slp: HelpLink.ProdName = Microsoft SQL Server
(01) 2014-04-10 11:51:39 Slp: HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39 Slp: HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath,
String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01) 2014-04-10 11:51:39 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80004005
(01) 2014-04-10 11:51:39 Slp: Error : 1300
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx,
String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File 'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: Error result: -2146233088
(01) 2014-04-10 11:51:51 Slp: Result facility code: 19
(01) 2014-04-10 11:51:51 Slp: Result error code: 5376
(01) 2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I uninstalled a previous installation of SCSM 2012 in our lab environment because the person who installed it is didn't give anyone else permissions and they weren't available to make the change. Since then, I've tried to install SCSM 2012 multiple
times and it fails every time during the Finalize step with the error shown in the picture below.
Things I've tried and double checked:
I am running the install with a domain admin account
I'm specifying a domain user service account during install which is local administrator on the machine
I rebuilt the performance counters
I'm running SQL 2k8 R2 SP2
.Net 3.5.1 is installed
I see the following message in the System Event Log during setup:
Event 7036 - The System Center Data Access Service service entered the running state.
Event 7031 - The System Center Data Access Service service terminated unexpectedly.
It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
It appears as though this happens 18 times before the service is no longer restarted and is left terminated.
Any thoughts or help on how to get this to work would be greatly appreciated! Log excerpts are below as well as a link to the full log file at the end.
Chris
Errors in the log that make me go "hmm…"
I changed my domain and username in the logs to "DOMAIN" and "user" respectively.
MSI (s) (74!94) [10:29:06:718]: Note: 1: 2711 2: MOMServer
Action start 10:29:06: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (74!94) [10:29:06:719]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
MSI (s) (74:04) [10:49:58:011]: Executing op: ActionStart(Name=_ExecuteSqlScripts,Description=Configuring Database,Template=[1])
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2769. The arguments are: _MPProcessorDeferred, 9923,
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: Old serviceConnectionPoint found
RegisterSdkSCP: Deleting existing serviceConnectionPoint
RegisterSdkSCP: Warning: Dont have access to delete existing serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\account
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSM Admins
RegisterSdkSCP: Error: The object already exists.
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart
WaitForSDKServiceStart:Entering
WaitForSDKServiceStart:Sleeping for SDK to start 0 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 10 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 20 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 30 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 40 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 50 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 60 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 70 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 80 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 90 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 100 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 110 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 120 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 130 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 140 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 150 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 160 seconds
WaitForSDKServiceStart:Sleeping for SDK to start 170 seconds
WaitForSDKServiceStart: SDK Service connect error, after 3 mins, fail this function
MSI (s) (74:40) [10:56:20:397]: NOTE: custom action _WaitForSDKServiceStart unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that
handle.
CustomAction _WaitForSDKServiceStart returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (74:04) [10:56:40:799]: Executing op: CustomActionRollback(Action=_RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=3393,Source=BinaryData,Target=InstallHSPerfCounters,CustomActionData=C:\Program
Files\Microsoft System Center 2012\Service Manager\)
MSI (s) (74:38) [10:56:40:801]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI62BF.tmp, Entrypoint: InstallHSPerfCounters
InstallHSPerfCounters: Custom Action Data. C:\Program Files\Microsoft System Center 2012\Service Manager\
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center 2012\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
MSI (s) (74:04) [10:57:10:844]: I/O on thread 2752 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:844]: I/O on thread 4796 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:844]: I/O on thread 4928 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 4612 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 884 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 2600 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 1884 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 4872 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 3084 could not be cancelled. Error: 1168
MSI (s) (74:04) [10:57:10:845]: I/O on thread 4920 could not be cancelled. Error: 1168
MSI (s) (74!E0) [10:57:10:846]: Product: Microsoft System Center 2012 - Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with
this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
CustomAction _RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (74:04) [10:57:17:154]: Note: 1: 1708
MSI (s) (74:04) [10:57:17:154]: Product: Microsoft System Center 2012 - Service Manager -- Installation failed.
MSI (s) (74:04) [10:57:17:155]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 - Service Manager. Product Version: 7.5.2905.0. Product Language: 0. Manufacturer:
Microsoft Corporation. Installation success or error status: 1603.
Full log file:
https://skydrive.live.com/redir?resid=F723C571E9E6D51F!1414&authkey=!ACisfvqIpGO_i7AHello Christopher,
I have recently worked in a case that had mostly the same errors:
InstallHSPerfCounters: Installing agent perf counters.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\HealthServiceCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. HealthService
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "C:\Program Files\Microsoft System Center\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 8152 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 9580 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 6008 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 2112 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 8252 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 12504 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 9548 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:586]: I/O on thread 11464 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 10616 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 8120 could not be cancelled. Error: 1168
MSI (s) (A8:D4) [10:29:51:587]: I/O on thread 2424 could not be cancelled. Error: 1168
MSI (s) (A8!D4) [10:29:51:587]: Product: Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are:
-2147024809, The parameter is incorrect.,
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211. The arguments are: -2147024809, The parameter is incorrect.,
CustomAction _RollBack_UninstallHealthServicePerfCountersForUpgrade.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (A8:3C) [10:29:51:599]: Executing op: ActionStart(Name=_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,Description=Stopping Health services,)
MSI (s) (A8:3C) [10:29:51:603]: Executing op: ActionStart(Name=StopServices,Description=Stopping services,Template=[1])
MSI (s) (A8:3C) [10:29:51:605]: Executing op: ServiceControl(,Name=W3SVC,Action=1,,)
MSI (s) (A8:3C) [10:29:52:621]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,).
- I was able to resolve it using the command line LOTCTR /R
- And restarting the IIS service using the command line tool IISRESET
- After this command was successfully applied I have tried to install the Service Manager Portal without any errors.
http://technet.microsoft.com/en-us/library/bb490926.aspx
http://technet.microsoft.com/en-us/library/hh875560.aspx
http://support.microsoft.com/kb/300956
https://blogs.technet.com/b/yongrhee/archive/2009/10/06/how-to-rebuild-performance-counters-on-windows-vista-server2008-7-server2008r2.aspx
Thank you very much
Renato Pacheco -
Install error SCSM 2012 SP1 _PopulateUserRoles
I currently have SCSM 2012 in production and working however when adding a secondary Management Server the installation fails at the Install Services, returning a
An error occurred while executing a custom action:_PopulateUserRoles. I am using the same system account that works on the primary Management server, verified that its a local admin on the new server, and the firewalls are opened on each
server. The account I am installing the software from is a domain admin and a local admin on the server. I have even elevated the privileges when launching the executable to no avail.
any help would greatly be appreciated!Perhaps this Cireson blog could help you?
http://cireson.com/blog/scsm-an-error-occurred/ -
How to generate Incident Report with incident description field? in SCSM 2012 sp1
Can incident description field be displayed in reports? in SCSM 2012 SP1
Regards
Shujjat
MetalsoftALTER PROCEDURE [dbo].[ServiceManager_Report_Incidents]
@Classification nvarchar(max) = '-1',@SupportGroup nvarchar(max) = '-1',@ID nvarchar(max) = null,@IncludeDeleted bit = 0,@LanguageCode nvarchar(max)= 'ENU'
AS
DECLARE @tableClassification TABLE (value nvarchar(256))
INSERT @tableClassification (value)
SELECT * FROM dbo.fn_CSVToTableInt(@Classification)
DECLARE @tableSupportGroup TABLE (value nvarchar(256))
INSERT @tableSupportGroup (value)
SELECT * FROM dbo.fn_CSVToTableInt(@SupportGroup)
DECLARE @tableID TABLE(value nvarchar(256))
INSERT @tableID (value)
Select * FROM dbo.fn_CSVToTableString(ISNULL(@ID, ''))
SELECT DISTINCT
I.Id,
I.Title,
Classification = ISNULL(ClassDS.DisplayName,ClassEnum.IncidentClassificationValue),
ClassEnum.IncidentClassificationId AS ClassificationId,
ClassEnum.ParentId,
Support = ISNULL(SupportDS.DisplayName,SupportEnum.IncidentTierQueuesValue),
SupportEnum.IncidentTierQueuesId AS SupportId,
Status = ISNULL(StatusDS.DisplayName, StatusEnum.IncidentStatusValue) ,
StatusEnum.IncidentStatusId AS StatusId,
AssignedTo.DisplayName AssignedToUserName,
AssignedTo.UserDimKey AssignedToUserId
FROM dbo.IncidentDimvw I
INNER JOIN dbo.WorkItemDimvw WI ON I.EntityDimKey = WI.EntityDimKey
LEFT OUTER JOIN dbo.WorkItemAboutConfigItemFactvw ON dbo.WorkItemAboutConfigItemFactvw.WorkItemDimKey = WI.WorkItemDimKey AND (@IncludeDeleted = 1 OR dbo.WorkItemAboutConfigItemFactvw.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.WorkItemAboutConfigItemFactvw CIFctForFilter ON CIFctForFilter.WorkItemDimKey = WI.WorkItemDimKey AND (@IncludeDeleted = 1 OR CIFctForFilter.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.IncidentClassificationvw AS ClassEnum ON I.Classification_IncidentClassificationId = ClassEnum.IncidentClassificationId
LEFT OUTER JOIN dbo.DisplayStringDimvw ClassDS ON ClassEnum.EnumTypeId=ClassDS.BaseManagedEntityId
AND ClassDS.LanguageCode = @LanguageCode
LEFT OUTER JOIN dbo.IncidentTierQueuesvw AS SupportEnum ON I.TierQueue_IncidentTierQueuesId = SupportEnum.IncidentTierQueuesId
LEFT OUTER JOIN dbo.DisplayStringDimvw SupportDS ON SupportEnum.EnumTypeId=SupportDS.BaseManagedEntityId AND ClassDS.LanguageCode =
@LanguageCode
LEFT OUTER JOIN dbo.IncidentStatusvw AS StatusEnum ON StatusEnum.IncidentStatusId = I.Status_IncidentStatusId
LEFT OUTER JOIN dbo.DisplayStringDimvw StatusDS ON StatusEnum.EnumTypeId=StatusDS.BaseManagedEntityId AND StatusDS.LanguageCode
= @LanguageCode
LEFT OUTER JOIN dbo.WorkItemAssignedToUserFactvw ON dbo.WorkItemAssignedToUserFactvw.WorkItemDimKey = WI.WorkItemDimKey AND (@IncludeDeleted = 1 OR dbo.WorkItemAssignedToUserFactvw.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.UserDimvw AS AssignedTo ON dbo.WorkItemAssignedToUserFactvw.WorkItemAssignedToUser_UserDimKey = AssignedTo.UserDimKey
WHERE
((-1 IN (Select value from @tableClassification)) OR (I.Classification_IncidentClassificationId IN (Select value from @tableClassification)))
AND
((-1 IN (Select value from @tableSupportGroup)) OR (I.TierQueue_IncidentTierQueuesId IN (Select value from @tableSupportGroup)))
AND
((@ID IS NULL) OR (I.Id IN (Select value from @tableID)))
-- exec ServiceManager_Report_Incidents @Classification=N'281,415,9,135',@SupportGroup=N'72,-1,69,43',@ID=N'IR55145' -
Reporting Tab is not showing in SCSM 2012 SP1 Console
I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre. -
I have set up SharePoint 2013 Foundation, SharePoint Reporting Services and SQL Server 2012 in a single server. I then created a Data Connection to Oracle 11g. Upon testing the connection, it throws the error “ORA-12638: Credential retrieval failed”.
Given below are the steps of installation and configuration.
Installation till basic authentication:
The installation has been done in a
single server.
Installed SQL Server 2012 (Developer version).
Selected only the following features:
Database Engine Services
Analysis Services
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools – Basic
- Management Tools - Complete
2. Installed SQL Server 2012 SP1.
3. Installed SQL Server 2012 SP2.
4. Installed SharePoint Foundation 2013.
5. Created web application (without Kerberos; we did not even create the SPNs).
The application pool has been configured to use Reporting Services account since it is a single server installation. This account has been registered as a managed
account.
6. Created Site Collection.
7. Verified that Reporting Services is not installed.
8. Installed SharePoint Reporting Services from SharePoint 2013 Management Shell.
9. Verified that Reporting Services is installed.
10. Created a new SQL Server Reporting Services Service Application and associated the Web Application to the new SQL server Reporting Services Service Application.
11. Verified that SQL Server Reporting Services Service Application and its proxy have started. Reset IIS.
12. Created a Site.
13. Created a Data Connection library with “Report Data Source” content type.
14. Created a Report Model library with “Report Builder Model” content type.
15. Created a Report library with “Report Builder Report” content type.
16. Uploaded an SMDL to the Report Model library.
17. Added the top level site to Local Intranet instead of as a Trusted Site in the browser settings.
18. Able to create and save a report using Report Builder.
Hence, basic authentication is working and SSRS is able to connect to Oracle database.
Next we have to configure Kerberos settings between SharePoint and SQL Server.
Implementation of Kerberos authentication
In the Report Server machine, opened the file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config and added the Authentication Types of RSWindowsNegotiate
and RSWindowsKerberos.
2. Set up the following SPNs.
a) SQL Server Database Engine service (sqlDbSrv2):
setspn -S MSSQLSvc/CER1110:1433 CERDEMO\sqlDbSrv2
setspn -S MSSQLSvc/CER1110.cer.demo.com:1433 CERDEMO\sqlDbSrv2
In the Delegation tab of the account, selected "Trust this user for delegation to any service (Kerberos only)".
b) Account: SharePoint Setup Admin account (spAdmin2)
setspn -S HTTP/CER1110:9999 CERDEMO\spAdmin2
setspn -S HTTP/CER1110.cer.demo.com:9999 CERDEMO\spAdmin2
In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
c) Account: SQL Server Reporting Service account (sqlRepSrv2)
setspn -S HTTP/CER1110 CERDEMO\sqlRepSrv2
setspn -S HTTP/CER1110.cer.demo.com CERDEMO\sqlRepSrv2
In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
3. Configure the Web Application to use “Negotiate (Kerberos)”.
4. Logged in as SharePoint Administrator to the SharePoint server and opened the top level site in the IE browser.
The Event Viewer logged the login process for the SharePoint Administration account as
Negotiate and not Kerberos.
5. Implemented Kerberos for Oracle database and client.
Able to connect to the Oracle database via Kerberos authentication using SQL Plus.
6. Turn on Windows Firewall.
7. While testing the site's data connection using Kerberos settings, got the error
“Can not convert claims identity to windows token. This may be due to user not logging in using windows credentials.”
Note: The Data Connection for basic authentication still worked.
8. Created a Claims to Windows Token Service account (spC2WTS2).
9. Started the Claims to Windows Token Service.
10. Registered the Claims to Windows Token Service account as a Managed Account.
11. Changed the Claims To Windows Token Service to use the above managed account.
12. Verified that the Claims to Windows Token Service account (spC2WTS2) is automatically added to the WSS_WPG local group on the SharePoint box.
Note: The Reporting Services service account is also a part of the WSS_WPG local group.
13. Added the Claims to Windows Token Service account (spC2WTS2) to the Local Admin Group on the machine having the SharePoint App Server.
14. In the SharePoint box, added the Claims to Windows Token Service account (spC2WTS2) in the Act as part of the operating system policy right.
15. The Claims to Windows Token Service account (spC2WTS2) has the WSS_WPG group configured.
When the C2WTS service was configured to use the managed account Claims to Windows Token Service account (spC2WTS2) earlier, the spC2WTS2 account was automatically
added to the WSS_WPG local group on the SharePoint box. The WSS_WPG group in turn is configured in c2wtshost.exe.config file.
16. Verified that the Reporting Services account is a managed account and part of the WSS_WPG group.
17. Earlier Service Application Pool - SQL Server Reporting Services App Pool service was associated with the SharePoint Admin account.
Changed this to associate the Reporting Service account with the Service Application Pool - SQL Server Reporting Services App Pool service.
18. Changed the delegation of the Reporting Service account to constrained delegation with Protocol Transitioning. This is because we are transitioning from one authentication scheme (Claims) to another (Windows Token).
For this, the delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use
any authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
Note: The Reporting Service account already had an HTTP SPN.
19. Next, the goal was to make the Claims To Windows Token Service account match the Reporting Service account.
For this, we created a fake SPN for the Claims To Windows Token Service account since the delegation tab was missing.
The delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use any
authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
20. Restarted the SharePoint server.
21. Tested the data connection with the Kerberos settings again.
Got the error
“ORA-12638: Credential retrieval failed”.
Can anyone tell me what is wrong with this setup?http://www.freeoraclehelp.com/2011/10/kerberos-authentication-for-oracle.html
Problem4: ORA-12638: Credential retrieval failed
Solution: Make sure that SQLNET.KERBEROS5_CC_NAME is set in sqlnet.ora and okinit has been run before attempting to connect to the database.
Do check
http://webcache.googleusercontent.com/search?q=cache:5a2Pf3FH7vkJ:externaltable.blogspot.com/2012/06/kerberos-authentication-and-proxy-users.html+&cd=5&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/ -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Error while creating SCSM 2012 sp1 self-portal on SP2013
Hell to everyone
today dive into SCSM installation and self-service portal setup. the environment i use is as following:
Windows 2008 R2 Datacenter x64 SP1
SQL 2012 BI Edition
Sharepoint server 2013 Enterprise Edition
SCSM 2012 SP1
i have successfuly set up SCSM 2012. everything is workig fine.
but when i go to sel-service portal setup (all components on one server - both Web-Content server and SP WebParts) i face with an error
_CreateSharePointWebSite.F175D191_81C3_4A7D_A05B_6A250575B468
the error is related to Site creation and SP webparts installation.
i tried to setup just Web-Content Server and installation was finished successfully.
Please help me with the issue! very urgently
there is no honda without racingHi Pavel,
According to your description, my understanding is that you got an error when you set up Service Manager 2012 SP1 running on SharePoint 2013.
Please check whether you have configured SCSM and SharePoint 2013 correctly. You can check as the following link:
http://blogs.technet.com/b/thomase/archive/2013/08/19/how-to-get-service-manager-2012-self-service-portal-running-on-sharepoint-2013.aspx
Please make sure you used the same account to instal SharePoint and Service manager.
If this issue still exists, please do as the followings:
Open Central Administration\Monitoring\Review job defintions, select the servers in the farm one-by-one , then click Application Server Administration Service Timer Job, click Disable.
Restart "Sharepoint 2010 Timer " in services.msc on all servers in the farm.
Try to install the SCSM portal.
Click Central Administration\Monitoring\Review job defintions\Application Server Administration Service Timer Job, click Enable.
Restart "Sharepoint 2010 Timer " in services.msc on all servers in the farm
Here are some similar links for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/47d43d25-6e14-464a-b899-c13dcbad880f/error-while-installing-service-manager-selfservice-portal?forum=sharepointcustomizationprevious
http://scug.be/valerie/2011/12/01/scsm-2012-self-service-portal-setup-can-t-create-a-new-site/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
<p>Hi,</p><p>I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.</p><p>The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.</p><p>The detail.txt log file shows as follows:</p><p>(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid<br />(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID<br />(01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True<br />(01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True<br />(01) 2014-07-17 15:36:35 Slp: ----------------------------------------------------------------------<br
/>(01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction<br />(01) 2014-07-17 15:36:36 Slp: Running discovery on local machine<br />(01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete<br />(01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01</p><p>After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails</p><p></p>Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Hello everybody,
we have installed scsm 2012 r2 (UR 3) with exchange connector 3. We have connected the connector by the workflow Account (domain user "servicedesk" is in local admin group of the sm server and in the sm Administrators group) and have access
to the mailbox on exchange (2010; autodiscovery is working correct). We receive all mails in the servicedesk mailbox on restarting the sm services and see the mails in the opm logs. But no incidents are created and the connector stays in "never
tun" state and does not receive mails any More after the first start. What do we have missed to check? Beste regards Thomasi have added the registry keys.
the last log says:
EwsResponse: <Trace Tag="EwsResponse" Tid="1" Time="2014-08-10 18:38:52Z" Version="14.03.0067.001">
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header>
<h:ServerVersionInfo MajorVersion="14" MinorVersion="3" MajorBuildNumber="174" MinorBuildNumber="1" Version="Exchange2010_SP2" xmlns:h="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<m:FindItemResponse xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types">
<m:ResponseMessages>
<m:FindItemResponseMessage ResponseClass="Success">
<m:ResponseCode>NoError</m:ResponseCode>
<m:RootFolder IndexedPagingOffset="1" TotalItemsInView="1" IncludesLastItemInRange="true">
<t:Items>
<t:Message>
<t:ItemId Id="AAMkAGM0NzI4Nzc5LWM0NWMtNDBiZC1iMjIyLWU5YTZlNGM0YjVjZgBGAAAAAADPPKNYSCzLRLMWL/UoJg1CBwAVmecTYATlQovl76GEizxlAAAAoyGrAAAVmecTYATlQovl76GEizxlAAAAo0kZAAA="
ChangeKey="CQAAABYAAAAVmecTYATlQovl76GEizxlAAAAo4Fd" />
<t:ParentFolderId Id="AAMkAGM0NzI4Nzc5LWM0NWMtNDBiZC1iMjIyLWU5YTZlNGM0YjVjZgAuAAAAAADPPKNYSCzLRLMWL/UoJg1CAQAVmecTYATlQovl76GEizxlAAAAoyGrAAA="
ChangeKey="AQAAAA==" />
<t:ItemClass>IPM.Note</t:ItemClass>
<t:Subject>Test 1</t:Subject>
<t:Sensitivity>Normal</t:Sensitivity>
<t:DateTimeReceived>2014-08-10T18:35:12Z</t:DateTimeReceived>
<t:Size>2858</t:Size>
<t:Importance>Normal</t:Importance>
<t:IsSubmitted>false</t:IsSubmitted>
<t:IsDraft>false</t:IsDraft>
<t:IsFromMe>false</t:IsFromMe>
<t:IsResend>false</t:IsResend>
<t:IsUnmodified>true</t:IsUnmodified>
<t:DateTimeSent>2014-08-10T18:34:56Z</t:DateTimeSent>
<t:DateTimeCreated>2014-08-10T18:35:12Z</t:DateTimeCreated>
<t:DisplayCc />
<t:DisplayTo>Service Desk</t:DisplayTo>
<t:HasAttachments>false</t:HasAttachments>
<t:Culture>de</t:Culture>
<t:EffectiveRights>
<t:CreateAssociated>false</t:CreateAssociated>
<t:CreateContents>false</t:CreateContents>
<t:CreateHierarchy>false</t:CreateHierarchy>
<t:Delete>true</t:Delete>
<t:Modify>true</t:Modify>
<t:Read>true</t:Read>
</t:EffectiveRights>
<t:LastModifiedName>Thomas Göttl</t:LastModifiedName>
<t:LastModifiedTime>2014-08-10T18:35:12Z</t:LastModifiedTime>
<t:Sender>
<t:Mailbox>
<t:Name>Thomas Göttl</t:Name>
</t:Mailbox>
</t:Sender>
<t:IsReadReceiptRequested>false</t:IsReadReceiptRequested>
<t:ConversationIndex>Ac+0ycOTmfHK8XrvSM2ftu9rcjREeg==</t:ConversationIndex>
<t:ConversationTopic>Test 1</t:ConversationTopic>
<t:From>
<t:Mailbox>
<t:Name>Thomas Göttl</t:Name>
</t:Mailbox>
</t:From>
<t:InternetMessageId><[email protected]></t:InternetMessageId>
<t:IsRead>false</t:IsRead>
<t:ReceivedBy>
<t:Mailbox>
<t:Name>Service Desk</t:Name>
</t:Mailbox>
</t:ReceivedBy>
<t:ReceivedRepresenting>
<t:Mailbox>
<t:Name>Service Desk</t:Name>
</t:Mailbox>
</t:ReceivedRepresenting>
</t:Message>
</t:Items>
</m:RootFolder>
</m:FindItemResponseMessage>
</m:ResponseMessages>
</m:FindItemResponse>
</s:Body>
</s:Envelope>
</Trace>
and the one before:
EwsResponseHttpHeaders: <Trace Tag="EwsResponseHttpHeaders" Tid="1" Time="2014-08-10 18:38:52Z">
200 OK
Transfer-Encoding: chunked
Content-Encoding: gzip
Vary: Accept-Encoding
Persistent-Auth: false
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Date: Sun, 10 Aug 2014 18:38:51 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate oYGyMIGvoAMKAQChCwYJKoZIgvcSAQICooGaBIGXYIGUBgkqhkiG9xIBAgICAG+BhDCBgaADAgEFoQMCAQ+idTBzoAMCAReibARqZCLk7OlBLjMLGg8XtQO+mutKfYPyK2jeJ2B+wq9raDj1chIZkQT0/72YftQJfdtu1DwfzmlEz8kDSD7ElFT2nF/T5LMDIMT4EpLJALsGQPTec86ubSbl1dKsIZn09qdoGDg5tGxV0bwOSg==
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
</Trace>
the one before:
EwsRequest: <Trace Tag="EwsRequest" Tid="1" Time="2014-08-10 18:38:51Z" Version="14.03.0067.001">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:t="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<t:RequestServerVersion Version="Exchange2007_SP1" />
<t:TimeZoneContext>
<t:TimeZoneDefinition Id="W. Europe Standard Time" />
</t:TimeZoneContext>
</soap:Header>
<soap:Body>
<m:FindItem Traversal="Shallow">
<m:ItemShape>
<t:BaseShape>AllProperties</t:BaseShape>
</m:ItemShape>
<m:IndexedPageItemView MaxEntriesReturned="1" Offset="0" BasePoint="Beginning" />
<m:Restriction>
<t:And>
<t:IsEqualTo>
<t:FieldURI FieldURI="message:IsRead" />
<t:FieldURIOrConstant>
<t:Constant Value="false" />
</t:FieldURIOrConstant>
</t:IsEqualTo>
<t:IsEqualTo>
<t:FieldURI FieldURI="item:ItemClass" />
<t:FieldURIOrConstant>
<t:Constant Value="IPM.Note" />
</t:FieldURIOrConstant>
</t:IsEqualTo>
</t:And>
</m:Restriction>
<m:ParentFolderIds>
<t:DistinguishedFolderId Id="inbox" />
</m:ParentFolderIds>
</m:FindItem>
</soap:Body>
</soap:Envelope>
</Trace>
the one before:
EwsRequestHttpHeaders: <Trace Tag="EwsRequestHttpHeaders" Tid="1" Time="2014-08-10 18:38:51Z">
POST /EWS/Exchange.asmx HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/14.03.0067.001
Accept-Encoding: gzip,deflate
</Trace>
the one before (xxx for our Domain):
Exchange Connector: Autodiscovered URL: https://sv-exchange01.xxx.intra/EWS/Exchange.asmx
Is there something we missed? -
Options for monitoring health of SCSM 2012 SP1 using SCOM 2012 SP1
Hi,
I've done some research on how to monitor SCSM using SCOM (version 2012 SP1 for both) and found two options:
Option 1 - Agent-based monitoring. With SCSM2012 SP1, it looks as though the agent is
already present (for upgrades and also for fresh installs). So it follows that SCOM will be able to monitor the health of SCSM.
Option 2 - Agentless monitoring. On the Technet
download page, 'System Requirements' section indicates compatibility with SCOM 2012 and above, and SCSM 2012 and above. Details tab says the following (emphasis mine):
This System Center Management Pack for System Center 2012 - Service Manager should be used to monitor
System Center 2012 - Service Manager, System Center 2012 R2 - Service Manager
and includes monitors for the management server as well as the Data Warehouse server. In this release of the management pack, the Data Access Service, Health Service, Configuration Service, and workflows are monitored.
So it looks like both options are viable, but I'd be interested in hearing other people's experiences of using one vs. the other. Is there any major difference in the information that's provided by agentless vs. agent-based monitoring, or are they just two
different ways of pulling the exact same information into SCOM?
Edit: Just occurred to me that SP1 isn't explicitly mentioned in the Technet article linked above under option 2. Has anyone successfully used agentless monitoring on SP1?Hi,
Here is a related blog for your reference.
SCSM 2012 SP1 (Beta) – Monitoring Management Servers with SCOM 2012
http://marcelzehner.ch/2012/09/29/scsm-2012-sp1-beta-monitoring-management-servers-with-scom-2012/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
Code: 0x80004005
Source: xxxxxxxx SSIS.Pipeline
Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
Code: 0xC0202009
Source: Process xxxxxx Load TableName [48]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
Code: 0xC020901C
Source: Process xxxxxxxx Load TableName [48]
Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Exporting Recipients details from all the Notification Subscriptions in SCSM 2012 Sp1
Hi Team,
Do we have any powershell script to export the recipients details from all the notification subscriptions from SCSM 2012 SP1. I have tried usind ChildEnumeration, but it didn't return any data. Sooner response would be highly appreciated.
Thanks,
Dinesh
Thanks & Regards, DineshSubaru, your solution is not sending the email from different domains though. And it is initiated manually through the console.
We are looking for the ability to have subscriptions send emails from different domains or email addresses depending on queues or similar. In my research, I think the only viable option is to use orchestrator as mentioned above and have it monitor
tickets for criteria specified. Its a pain and a huge limitation in my opinion.
I think the bottom line is to not use subscriptions for a full loop email system. only use it for emails that will not be replied to.
Maybe you are looking for
-
It maybe to do with the registry cleaner. Most people seem to fix it by using restore points which I just realised I hadn't created any beforehand....don't lecture me on it I already know, stupid move. Using Vista. I also know I have a lot of stuff l
-
Hi We are reconciling every month Drill down report with posted and unposted journal balance in 11.5.10.2 as follows : Reconciling Journal Entries to General Ledger Accounts Activity Apr-08
-
I am trying to connect to LDAP to check an entry. Following is the servlet code I am using. /* @author This class is establish to connect the LDAP user directory and get the user attributes (SSO_USERID, USER_ID, USER_NAME and USER_MAIL) from the LDAP
-
Re: Satellite L855 and Windows 8 - can not adjust screen brightness
Hi everyone ! I installed Windows 8 on my Satellite L855 and it is running pretty well except that I can no more adjust screen brightness !!! I updated all the drivers for Win 8 but it didn't resolve the issue. Hope someone can help me !! Thanks !!
-
How to make the bt hub work with GreenBee?
I have some old BT hub (hub 2,3,4) can I make any of them work with another ISP like greenbee I heard changing the user name and password works? But I don't know what to change them to