Install Siebel in new server applicatio

Hello,
I need to know the steps to install Siebel 7.7 in the server application. The old server application was down. Please advice

First of all, you should install the software on the server only, you should NOT create a database.
As you can restore a database to a new host (and this is documented), you won't have any problems. That is, if you don't create a database during installation, and read up on recovery.
I wonder: why do all those anonymous users always can't be bothered to read the documentation, and ask others to paraphrase it for free?
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Error when installing to a new server

I get the following error when attempting to install SunOne 6.1 SP2:
ERROR: The directory /drivelocation/SunWebSrv already exists and might contain pre-4.0 Sun ONE servers. Installing into an existing pre-4.0 server root is not supported. Choose another server root.
The server is a new server without any existing versions of iPlanet or SunOne installed on the server. The location we are attempting to install to is its own drive mount on the Solaris system with only the directory "lost+found" located in the folder. Does anyone have an idea as to why this is happening or know of a possible workaround for this?
Thanks!

The problem is that you're trying to install to a non-empty directory. Web Server requires its own directory all to itself. Either remove the lost+found directory before starting the installer or tell the installer to install to a subdirectory.

Installing 2009 on new server, move license from 8.2.1 to 2009 on new server

I need to move the license service from one server to another. We currently use 8.2.1 but want to test 2009. Can I move the license service over and still use 8.2.1 and let my users test 2009 off the new license server? Will one license server allow both versions? How do I perform the move for the license service?

You only need one license server. With an updated license file, it will allow access to the previous versions of LabVIEW as well as the new one. At least it does for me.
Randall Pursley

Can we do a fresh install of TES 6.2.1 on a new server, but point to an database currently used by the older version (v5.3.x)

The current database is 2.5 gb, but it is already on SQL Server 2008, and doesn’t need to be upgraded.
In reading the documentation, it looks like the installer can install a fresh copy, which I’m assuming creates the requisite tables in the database. It can also update an existing install, along with updating the database table structure. What we weren’t sure of was if it could do a fresh install on a new server, but point to an database currently used by the older version of tidal. It does say ‘The database modifications are performed when the master is first started after the installation.’ in the upgrade section of 6.2.1 Quickstart Page 6-5. Hopefully that works regardless of if it was an upgrade or a fresh install.

We worked with one of their partners gssinfotech to create a custom runbook for "upgrade in place"
I think you might have to go to SQL2012 with 6.2.1 (there's a ton of benefits like always on that make BCP/DR with Tidal very smooth.) We've been Tidal 6 /SQL2012 for a while now so I forget. we're about 80% done with our 5.3.1 conversion
We restore our 5.3.1 admiral database to a sandbox SQL2012 server, run some cleanup script (if not upgrade in place, don't forget to set queue to zero and disable all jobs)
We installed a tidal Master then run every major rev and point to that database. (6.0,6.1,6.2,6.2 sp1)
The database gets upgraded during the process (we have some trouble with our "older" 531 so we do the same thing each time)
We then can use transporter to transport "legacy" 531 jobs to our pristine Tidal 6.2.1 (non-prod ) environment so we can take advantage of mapping files, etc. to switch things as needed
This gives a lot of flexibility to moving things in when one piece or job set at a time.. we use it to move job frameworks into nonprod Tidal 6 so that developers and other groups can review / asses / rewrite / test / their jobs on tidal 6.
Marc

Report Fails on New Server - Looking for CrystalXIRuntime.msi

Hi - I have been trying to migrate to a new webserver but cannot get one of my apps to run,   Our former developer - who I cannot find - used Crystal Runtime in a reporting app and I cannot seem to get the right version of the runtime installed on the new server.
Our existing server has been running for 3 years and this app has been on there for a while.    When I prepped the new server I installed Crystal 11 .Net Server software.    However, one of my apps still does not run.    I get the following error:
Could not load file or assembly 'CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 34:<compilation debug="false" strict="false" explicit="true">
Line 35: <assemblies>
Line 36: <add assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Line 37: <add assembly="CrystalDecisions.Shared, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Line 38: <add assembly="CrystalDecisions.ReportSource, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Now - I have copied ALL of the files including all dlls. from Inetpub down, from the existing server to the new server.   I notice that in addition to Crystal 11 .Net Server, I have something called simply "Crystal Runtime" on the existing server.   When I click support information in Control Panel it says version 1.0.0 but when I click on "Repair", it tries to find a source file called CrystalXIRuntime.msi.   I cannot find this anywhere.
Im thinking I need to install this or register some of the dlls on the new server.
I am desparate to get this going. Can anyone help me with this dilema?

Hello Michael,
please download and install the [CR XI server install|https://smpdl.sap-ag.de/~sapidp/012002523100006009122008E/crXI_server_install.zip] on your new server.
This should fix the problem.
Anyway, I strongly recommend [to update to CR XI R2|http://resources.businessobjects.com/support/additional_downloads/service_packs/crxir2.asp] for free and to continue with this product release.
Best regards
Falk

Migrating to New server

Hi All,
Have a two node RAC say A and B. I need to move this to a new two node server retaining the same ip and hostname. Same OS is installed in the new server. Storage administrator says he can mount the same mountpoints to the new server except default OS mountpoints like /etc , /var, /tmp.
In Rac the init* services are under the /etc/init.d how do i get this to new servers. Does mounting the all mount points and if crs is there , bring down A and B and assign the IP and hostname to new servers, will it bring up all services??
thanks,
baskar.l

Hi,
no this will not work, since the RAC installation itself places some more root files (like updating inittab and creating /etc/oracle and other things).
Even if you know RAC good enough to know what all to copy, this would not be supported.
The only thing, which "might" work is to clone the disks to the new server (e.g. with dd or Norton ghost), but even then, this would not be officially supported by Oracle.
The way to echange nodes in a RAC environment is to actually add a node and delete a node (or first delete one and add it back in).
The good thing with "add a node" and delete a node is, that this can be done online, without interrupting your operation.
Regards
Sebastian

I think I may have discovered the solution to installing CFMX7 on Windows Server 2003 SP1

I have not tried to reproduce this method so it may not be a
solution, but it worked for me. After many hours of trying to get
CFMX7 to install on a new server with a fresh install of Windows
Server 2003 with SP1, I stumbled across this and it actually
worked. Using the coldfusion-702-win.exe installer, I right clicked
on the .exe and even though I was logged in as an administrator I
received the option to Run as, so I decided to give it a shot. I
chose the option to run as Current User, but I unchecked the box
'Run this program with restricted access'. After I did this, the
install went through error free.

I have not tried to reproduce this method so it may not be a
solution, but it worked for me. After many hours of trying to get
CFMX7 to install on a new server with a fresh install of Windows
Server 2003 with SP1, I stumbled across this and it actually
worked. Using the coldfusion-702-win.exe installer, I right clicked
on the .exe and even though I was logged in as an administrator I
received the option to Run as, so I decided to give it a shot. I
chose the option to run as Current User, but I unchecked the box
'Run this program with restricted access'. After I did this, the
install went through error free.

Move Adobe Connect 7.5 to new server hardware

What is the process for moving Adobe Connect to new server hardware. We are currently running Adobe Connect Pro 7.5 (7.5.1.0.100) on a Win2K3 SP2 server. We would like to move Connect over to new server hardware running Win2K8 R2 (64-bit). The Connect database will remain on a separate Win2K3 SP2 / SQL 2005 sp4 server.
Unless it will pose a problem, the NETBIOS computer name will be different. However, the IP address and FQDN will remain the same.
What is the recommended procedure for doing this?
PS - Shortly after moving to new hardware, we plan to upgrade to Connect 8. Is it better to upgrade first, then move to new hardware? Or vice-versa?

Hi,
moving to new hardware is basically a new install on the new server, then moving over backed up content, then reconnecting to the database.
It makes no difference if you upgrade first and then move hardware or move first and then upgrade. I'd move first and make sure Connect works fine on the new hardware, then upgrade.
Here are some steps that should work.
1. make sure your new hardware, OS and SQL Server are supported
     http://help.adobe.com/en_US/connect/8.0/installconfigure/connect_8_install.pdf
    (for 7.5 check the requirements here: http://www.adobe.com/products/acrobatconnectpro/systemreqs/#proserver )
2. Take a backup of your current content directory and all customised config files.
    (the config files will be a reference to restore SSL or other modifications, do not just move them back in once upgraded).
3. Take a backup of your database and make sure you know the login and password to your SQL server.
4. Stop the services on the old server
5. If also moving DB, attach your DB backup to the new SQL host.
6. Install Connect on the new hardware.
7. Do not start the services yet, first restore the backed up content.
8. start the services, bring up the console and connect to the DB.
9. check your settings in the console, a restart might be required first.
10. Does the login page load?
11. Follow the install guide from step 1 to re-apply SSL config if required (in Connect 8 this is done slightly different than in C7)
Changing the windows machine name, can cause trouble, not always, but it's easiest to just re-use the name on the new hardware.
If that's not an option, an entry in the conenct DB needs to be updated:
http://kb2.adobe.com/cps/407/kb407446.html
I am fairly certain these steps will work, but cannot test this and I do not know your exact environment, so I can give no guarantee this will work. It is always good to just test the move to new hardware and if things go wrong, bring the old system back into production and contact support.
Good luck!
Kay

Migrating MySQL database to new server

I'm rebuilding a server for a client and I need to migrate the MySQL database off of the old server onto the new. I'm going from Server 10.5.4 to Server 10.5.4. I tried just taring the old database location at /var/mysql and untaring it to the new server at the same location and started the MySQL service, but it service won't start properly.
I get an error in the MySQL Admin Log file that says that the "MySQL daemon startup timed-out"
After looking at the database files, they appear to have the old server name included in their names, and there is a pid file that is specific to the server.
Is there a process for exporting/importing the MySQL databases so I can get them installed on the new server?
Thanks.

So I'll reply to my own question so the answer is documented.
I used the following command it export all the database from the old server:
mysqldump -u username -ppassword --all-databases > alldump.sql
username is the name of the admin user, usually root
password is the admin password, make sure there is no space between the -p and the password. So if the password is "twit" the option is -ptwit
And the two -- are needed in the --all-databases option
Copy the alldump.sql file to the new server and run the following command to import all the databases:
mysql -u username -ppassword < alldump.sql
Be sure to set the admin password in Server Admin and start the MySQL service before importing.
That's it.

Move Owb database to new server

Hi,
We are going to move our Owb (9.2.0.2.8) database to a new server. The nodename isn't going to change only the ip-address will change. The OS will be the same.
The steps will be:
1) install Owb on new server
2) copy database to new server
Is there some other step we'll need to take?
regards,
Ivan

Здравствуте Ivan.
Before i would do anything like this i would make sure that i have a good valid backup (just in case!).
I would check all the applications that are currently conencting to your ORacle and make sure they are all conneting 'by name' not the IP. Or and then i would check DNS server (make sure nslookup is working) to makesure that everything resolves correctly after the moving DB to another machine.
Then check that the oracle_home etc are in the same directory and check that all paths etc in the configurations are the same.
Hope this helps
Kind Regards

BACKUP FROM OLD SERVER & RESTORE TO NEW SERVER

Hi ,
i have install SAP on New Server (ADM X86) , it has good hardware. that why i want to shiftout from old deveopment Server to new Server . From old server i want to take backup through DB13 and restore through Brtools on new server. backup will be on disk.
please guide me which type of backup should be taken ?
and what is difft b/t whole backup and full backup ?
NEW SERVER with 2 Quard core processor, 24 GB RAM
OS= SOLARIS 10
DB= Oracle 10.2.0.4 with 39 Interim opatch
SAP= Ecc 6.0
Hostname=sapdev
System No.=00
OLD Server(SPARK) WITH 1 Dual Core Processor , 6 GB RAM
OS= SOLARIS 10
DB= Oracle 10.2.0.4 with 39 Interim opatch
SAP= Ecc 6.0
Hostname=devsap
System No.=00
Best Regard
Imran Khan

Hi Imran,
In you have a full backup, using this existing backup further you can take incremental backups. The incremental backup is based on the previous full backup. The full and incremental backups is controlled by RMAN (Recovery manager).
You can take a full backup and restore the same in your new server and later take an incremental backup from your old server and restore it to the new server for all the delta changes made. By this you can make sure that your production data is made consistent in the new server.
If you have sufficient dowtime then, you can take a whole DB backup with redo log files and restore them in your new server.
There is no difference between whole backup and full backup, with respect to the database data.
784118 - System Copy Java Tools
check the OraBrcopy tool in this note. It might help you.
regards,
chandru.

New install of Crystal 2013 Server; getting errors

New install of Crystal 2013 Server on Windows 2012R2 Server
In the Connectivity Services; the ConnectionServer32 shows a state of Initalizing, and Disabled
In the Crystal Report Services; the CrystalReports2013ProcessingServer shows a state of Running with errors and Disabled
In the Crystal Report Services; the CrystalReports2013ReportApplicationServer shows a state of Stopped and Enabled
Hovering over Stopped I get "The Executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess error + 14001, The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log."
Application Event Log Entry:
Log Name:      Application
Source:        BusinessObjects_cms
Date:          4/21/2014 11:43:12 AM
Event ID:      33017
Task Category: General
Level:        Warning
Keywords:      Classic
User:          N/A
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
Unable to contact server DBHTCRYSTAL01.ConnectionServer32 on machine DBH-TCRYSTAL01.sbcounty.gov to perform status notification. Please check the server's system log for errors.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="BusinessObjects_cms" />
    <EventID Qualifiers="0">33017</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T18:43:12.000000000Z" />
    <EventRecordID>32081</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security />
</System>
<EventData>
    <Data>DBHTCRYSTAL01.ConnectionServer32</Data>
    <Data>DBH-TCRYSTAL01.sbcounty.gov</Data>
</EventData>
</Event>
System Event Log Entry:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          4/21/2014 7:49:07 AM
Event ID:      10016
Task Category: None
Level:        Error
Keywords:      Classic
User:          SYSTEM
Computer:      DBH-TCRYSTAL01.sbcounty.gov
Description:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}
and APPID
{AD65A69D-3831-40D7-9629-9B0B50A93843}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-21T14:49:07.818690400Z" />
    <EventRecordID>8228</EventRecordID>
    <Correlation />
    <Execution ProcessID="668" ThreadID="804" />
    <Channel>System</Channel>
    <Computer>DBH-TCRYSTAL01.sbcounty.gov</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Launch</Data>
    <Data Name="param4">{05D1D5D8-18D1-4B83-85ED-A0F99D53C885}</Data>
    <Data Name="param5">{AD65A69D-3831-40D7-9629-9B0B50A93843}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">SYSTEM</Data>
    <Data Name="param8">S-1-5-18</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
    <Data Name="param10">Unavailable</Data>
    <Data Name="param11">Unavailable</Data>
</EventData>
</Event>
I also have second Windows 2012R2 Server / Crystal 2013 Server install that is working just fine and the only difference is it is not a member of the Domain.
Barry Streets
[email protected]
510-238-2727 ext 2780

In addition to checklists provided by Josh; I would suggest you to perform a repository scan of the system to identify whether any objects were not installed properly and there might be a possible corruption. Use the link mentioned below to perform repository scanning.
How to use Repository Diagnostic Tool - Business Intelligence (BusinessObjects) - SCN Wiki
You can try to repair the install. Also as this is a new install you can directly go for re-installing the software.
PS: Try to re-download the software from the service market place rather than copying the installer from existing one.

Got new update, instaled on my home server 2008, as I had the previous version. Now with the new Itunes my home sharring is ot working when it use to work fine on the older version

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my Laptop on windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Upgrade or re-install? CE9 to BOE XI R2, new server has BOE XI old version

We have an old server that's running Crystal Enterprise Reports version 9 and it is the current production machine.
We also have another server that was purchased a couple years ago and BOE XI was loaded on it and the CE9 stuff was migrated to it. But the migration was never completed and the person in charge of this left and the project has sat since then due to resource issues.
I am now tasked with creating a plan for getting BOE XI R2 loaded on the "new" server and migrating the information from the CE9 server. There are 2 options that I can see.
1) Upgrade the existing BOE XI in place to R2. Would doing this preserve configuration that had already been done? What problems will be presented by the fact that information was already migrated once from CE9 and everything will need to be re-migrated?
2) Completely uninstall BOE XI and then reinstall BOE XI R2. Start from scratch with configuration and migrating information from the CE9 server.
Also, I saw mention in another thread of obtaining the services of a consultant. We typically do not do that unless it's absolutely necessary. Would like your opinions on whether this is really complicated enough to warrant hiring outside help or if we should be able to learn what we need from documentation. The person that did the original migration took training classes and we did not use a consultant. Thanks for your help.

Well you said the XI environment is old, but if you wanted to an upgrade will keep what you have. We usually recomend migration vs upgrade if a production server is installed but in DEV if all goes wrong, your other option is to reinstall anyway, so might as well try it out.
What I think you will end up doing is migrating from CE9 to XIR2. It's a pretty tall task for anyone to assume they can guide you through a migration of 3 product versions in a simple forum post. This is why it's recomended to use a consultant, as they will get to know your existing environment and all the possible "gotcha's".
The import wizard is your tool for migrating reports, users, groups, folders, and even instances from CE9 to XIR2. You are welcome to perform this on your own and if you have a contract you can always open a message with support if you get stuck.
Regards,
Tim

Installing contact center enterprise 6.0 in new server and upgrading to 7.0

Hi,
I am trying to install contact center enterprise 6.0 into a new server ( earlier both call manage 4.3 and enterprise 6.0 were in the same BOX). So now i am upgrading cucm4.3 to 7.0 and installing enterprise 6.0 onto a new server taking backup from the old server and restoring in the new server. and after that i am planning to upgrade the Enterprise version to 7.0. Is this the right way or there is any other way.

Take a look at the 7.0 Upgrade Guide for your options. You'll be looking for Tech Refresh.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/installation/guide/Upgrade_Guide.pdf
Is there any reason why you are not upgrading to UCCE 7.5 which is compatible with UCM 7.0?

Install Siebel in new server applicatio

Similar Messages

Maybe you are looking for