Installation Fails via Update Site for Eclipse 3.2.1

<img src="http://farm1.static.flickr.com/163/395847965_01aaf8f849.jpg?v=0" alt="Install Failure" width="500" height="220" />This is the error I get when I try to install Crystal Reports for Eclipe (1.0.2.v795) using the update site. http://www.businessobjects.com/products/dev_zone/eclipse/Why is it requiring org.eclipse.ui 3.1.0? I think 1.0.0.v555 worked with Eclipse 3.2.Screenshot Image: http://www.flickr.com/photos/ctaggart/395847965/ Cameron

Hi Cameron, I believe the error message is indicating that our plugin is requiring a version of org.eclipse.ui 3.1.0 or higher. Does your current version of Eclipse have Crystal Reports for Eclipse already installed? If not, then it is likely you will need additional plugins from the Eclipse.org site which are not installed by default. I just tried this on my end and selected the Callisto Discovery Site as well as the Business Objects site. After selecting the latest version of CR4E, I expanded the Callisto Discovery Site and clicked the "Select Required" button. This allowed my download to go through. Can you confirm that you are following these steps? If you like I can upload a doc with a selection of screenshots demonstrating the steps I followed. Let me know and I will post it in a follow-up. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Similar Messages

Cannot install CR 2011 upgrade - Failed to update cache for execution

We just purchased an upgrade to Crystal Reports 2011. Whenh I try to install, I get through all of the setup prep steps, etc...but close to the end the install freezes and then pops this error message: "Failed to update cache for execution. Program will exit." And then it does just like it says...it exits. I have uninstalled my old XI version but still it fails to install.
I am running this on an HP laptop running Win 7 64-bit. This machine has run XI just fine for some time.

This is the Database forum so not sure why you posted here....?
Moved your post to the Report Design forum.
See this thread for what to do next: Installation Issues CR 2011
Thank you
Don

Online or archived update site for 12.1.1?

Hi!
Any chance there will be online or archived update site for 12.1.1?

Since the time frame for the OEPE 12.1.1 beta is fairly short, less than two months, we are only planning on making the zipped installers available. We plan to run additional beta programs throughout 2012 and will consider making either an update site or update site archives available.
Is your standard install method for OEPE from the OTN Update Site?

Failed to update cache for execution. Program will exit

I'm trying to install cr2011 on windows vista and getting "Failed to update cache for execution. Program will exit".
It occurs at Caching Deployment Units
crystalreports.cpp.printcontrol-4.0-en-32,14.0.0.760
I have CR10 & 11r2 and VS2005 & 2008 on this machine.
Any ideas?

It's installed ok on my laptop this has VS2005 & 2008 and Crystal 11.5r2.
Do SAP suggest you can't install it on machines with previous versions on?

Eclipse update site for FlexUnit 4.1?

Is there an update site that I can point Eclipse at to update the FlexUnit plugin to FlexUnit 4.1?
If not, then how are people updating Eclipse?

Still not good (sorry). I tried the flex one alone, and when that didn't work, I add the following.
fluint-extensions-4.1.0-8-4.1.0.16076.swc
flexunit-uilistener-4.1.0-8-4.1.0.16076.swc
To be honest, I'm a bit confused as to how this all fits together. I'm assuming that when I run "Execute FlexUnit Tests" from the Navigator, that the Adobe plugin will interrogate the code and set up the main test application called FlexUnitApplication.mxml. Then it just runs that.
To normalize my results I did this.
1. Cleaned Unit Test project.
2. Ran Execute Flex Unit Test from navigator. This time it ran, but the Test method I had using a dataProvider, similar to the example on the website, gave the following error.
     "Error: Method badFormTest should have no parameters.
Here's a portion of the code.
public static function badFormTests():Array {
            return [
                /* Testing comment 17110 */
                ["-9*r+27*s+63*t","-9*r--27*s--63*t"],
                ["-9*r+27*s+63*t","-9*r+--27*s+--63*t"],
                ["x+3","x--3"],
                ["x+3","x++3"],
                ["x+3","x+--3"] ,
                ["x+3","++3+x"],
                ["x-3","x---3"],
                ["5x-3","--5x+-3"],
                ["5x-3","-3--5x"],
                ["5x+3","5x--3"],
                ["5x+3","5x++3"],
                ["5x+3","5x+--3"],
                ["5x+3","++3+5x"],
                ["5x-3","5x---3"],
                ["5x-3","--5x+-3"],
                ["5x-3","-3--5x"],
                ["5x-3","--5x+-3"],
                ["5x-3","-3--x5"],
                ["5x+3","x5--3"],
                ["5x+3","x5++3"],
                ["5x+3","x5+--3"],
                ["5x+3","++3+x5"],
                ["5x-3","x5---3"],
                ["5x-3","--x5+-3"],
                ["5x-3","-3--x5"],
                ["x+3","x-(-3)"]
                /* End comment 17110 */
        [Test(dataProvider="badFormTests")]
        public function badFormTest(correctExpr:String, responseExpr:String ):void
            Assert.assertEquals(
                TDXEvaluatorStatus.NAMES[TDXEvaluatorStatus.BADFORM],
                evaluate(TDXAnswerRules.ACCEPTSIMILARFORM,
                    correctExpr,
                    responseExpr
On top of this, if edit any one of my source files (i.e., add and remove a space and save it) and build the project again, I get many errors. Here they are.
Description
Resource
Path
Location
Type
1046: Type was not found or was not a compile-time constant: [flash.events]::IEventDispatcher.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: [org.flexunit.async]::IAsyncTestResponder.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: [org.flexunit.internals.runners.statements]::IAsyncHandlingStatement.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: [org.flexunit.internals.runners.statements]::IAsyncStatement.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: AsyncResponseEvent.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: AsyncTestResponder.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: FlexEnvironmentBuilder.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: FlexMXVisualTestEnvironment.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: ISequenceAction.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: ISequencePend.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: ISequenceStep.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceBindingWaiter.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceCaller.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceDelay.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceEventDispatcher.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceRunner.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceSetter.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: SequenceWaiter.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: TextListener.
UnitTests
Unknown
Flex Problem
1046: Type was not found or was not a compile-time constant: VisualTestEnvironmentBuilder.
UnitTests
Unknown
Flex Problem
I appologize if I'm doing something bad. I really appreciate your help.

Windows server update services installation failed the update could not be found

Hi everybody...
I have tried to install WSUS Role on windows 2008 r2 ent server. its says windows server update services installation failed.
actually the wsus role for SCCM 2007, asper the prerequesite i have finished all other steps, only wsus role is pending.. please help..

Thanks FinMaky,
The keys are:
(1) to delete WindowsUpdate registry keys, and then
(2) enable/restart Windows Update services.
(3) also to make sure there's no WSUS policy defining update server is in place
This resolves my issue.
BIG THANKS!
Tuesday, April 05, 2011 1:53 PM
Reply
|
Quote
|
Report
as abuse
FinMaky
---Pat

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Software Installation fails via GPO

GP SERVER:
Windows Server 2008 R2 Standard 64 Bit
CLIENT PC's:
Windows 7 Professional 64 Bit
DEPLOYMENT INFORMATION:
General:Deployment
type - Assigned
Deployment source - \\SERVER\FOLDER\MSI.mis
Uninstall this application when it falls out of the scope of management - Disabled
Advanced Deployment Options:
Ignore language when deploying this package - Disabled
Make this 32-bit x86 application available to Win64 machines - Enabled
Include OLE class and product information - Enabled
Permissions:
Allow
XXXXXXXX\Domain Admins
Full control
No
Allow
NT AUTHORITY\Authenticated Users
Read
No
Allow
NT AUTHORITY\SYSTEM
Full control
No
Allow
XXXXXXXX\Domain Admins
Read, Write
Yes
Allow
XXXXXXXX\Enterprise Admins
Read, Write
Yes
Allow
NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
Read
Yes
Allow
NT AUTHORITY\Authenticated Users
Read
Yes
Allow
NT AUTHORITY\SYSTEM
Read, Write
Yes
Allow
CREATOR OWNER
Read, Write
Yes
Administrative Templates:
Startup policy processing time – Enabled 30 seconds
Always wait for the network at computer startup and logon - Enabled
Error(s) on test client OC:
Sourced from Windows Logs > System
Error 1 - "The install of application XXXXXX from policy XXXXXX install failed. The error was: %%1612"
Error 2
- "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was:
%%1612"
Based on the information above, is anyone able to advise if there is anything I have overlooked?
Jeet S

Good Morning,
So despite numerous variations and permission settings we are still experiencing problems with this. So this is what has been done so far –
The msi file has been moved to another location on the network which we know works for other msi files –
This did not work although when we check event viewer, gpresult and RSOP the policy is being applied but the software installation is failing.
Added domain users to local admins. The share folder containing the source msi has
Everyone setup for read and execute permission –
This made no difference
Tried running the msi file logged in as administrator and also tried running the msi whilst logged in as myself –
The msi runs fine for administrator but will not run when logged in as myself and gives the following error:
Software installation failed due to the error listed below. The installation source for the product is not available. Verify that the source exists and that
you can access it.
The msi contains an upgrade to our antivirus software. I setup two machines one with the old antivirus software installed on it and the other without any antivirus software on it. Logged in as domains users on each machine and did a gpupdate /force /boot
After logging back in I ran RSOP and found that on the machine which had no antivirus on it to begin with there was an error for software installation stating –
Fatal error during software installation. For the machine that had antivirus already installed on it there was no such error and the software installation states that the installation was successful and yet the new A/V software is still not installed.
This morning I got in early to try and do some more work on this but my boss was already here and advised that even a login script will not work so he has installed it manually on one of the machines and it appears to have worked fine. Not really sure where
to go from here.
Jeet S

Installation fails via Creative Cloud App manager on windows 8 - can't find log

No information given in Creative Cloud App manager.
I click on "Learn More"
and get a window that tells me the following
Installation failed
Errors encountered during installation.(7)
More Information
"More information" is a link/button but clicking it does nothing.
Where are the logs on windows 8?

You can try checking out the logs, at http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
And this might be handy too: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Good luck,

Installation of Cumulative Update 2 for SCCM 2012 R2 causes Application Catalog error Cannot connect to the application server"

I have update my primary server with cu2. Rebooted it when requested. Now everything appears to work except Application Catalog. I am getting HttpSendRequestSync failed errors in sms_awebsvc_control_manager and SMS_MP_CONTROL_MANAGER. Permissions
for the temp folder and the 2 service folders do have local service and system with full control. I reregistered .net 4 with aspnet_regiis -i -enable. Rebooted and no change. application pool is running. The install logs said it is
working. SQL is happy. I have reinstalled the two Application Catalog service points varous ways and they always come back with warm fuzzy logs stated they installed.
When someone tries to use Application Catalog the ServicePortalWebSite.log always produces the following errors:
[15, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/default.aspx, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Got 5.0.7958.1000 build version
[11, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[11, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[11, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[7, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[7, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[7, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetApplications, startItem = 0, search text = ''
[7, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[7, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetApplicationValuesForProperty(ApplicationProperty propertyName, String reserved)System.Net.WebException: The remote server returned an error: (500) Internal Server
Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 1
Any feedback is appreciated.
Mike In Vancouver

The following repeats hourly since installing Cumulative Update 2 in the log awebsctl.log:
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 5:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 5:09:45 AM 4436 (0x1154)
Timed Out... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Starting certificate maintenance... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Certificate (0x3adbdab0) is Exportable SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Successfully granted permission to certificate
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Successfully completed certificate maintenance
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
SSL is not enabled. SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Health check request failed, status code is 500, 'Internal Server Error'.
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
STATMSG: ID=8100 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AWEBSVC_CONTROL_MANAGER" SYS=server.site.com SITE=ABC PID=3000 TID=4436 GMTDATE=Tue Sep 23 13:09:45.600 2014 ISTR0="500" ISTR1="Internal Server Error"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Mike In Vancouver

Is There Updated Site For P2 Card Reader Drivers?

Hey my friend just got Final Cut 6 on his new macbook pro and he wants me to help him find the proper drivers needed for the P2 Card so he can take footage from the P2 and bring it in the computer via FCP. Is there a website that tells everything I need that might have been updated in the past year or so? Thanks.

{quote:title=Surfgod wrote:}
Hey my friend just got Final Cut 6 on his new macbook pro {quote}
FCP 6 & 7 have a Log and Transfer Window for ingesting P2 media...
...but new Macbook Pros don't have the necessary PCMCIA slots.
You can copy the P2 files to your hard disk from your camera via Firewire,
and FCP can ingest them from there. In the Log & Transfer window,
click on the upper left-hand button "Add Folder" to search for P2 directories.
{quote}find the proper drivers needed for the P2 Card{quote}
https://eww.pavc.panasonic.co.jp/pro-av/support/cs/csregistp2m/ep2main/macp2driv er_e.htm
{quote}Is there a website that tells everything I need that might have been updated in the past year or so?{quote}
The most recent version of FCP 6 is here:
http://support.apple.com/downloads/FinalCut_Pro_6_06

11.2.0.3 grid installation fails while selecting OCFS2 for ocr files

We are installing 11GR2 (11.2.0.3) cluster on a 64 bit system. we have OCFS2 filesystem for shared devices. version 1.6.3.
While selecting ocr file locations , we get the following error
[INS-41321] Invalid oracle cluster register [OCR] Location
Cause- The installer detects that the storage type of location is not supported for Oracle Cluster registery
Action - Provide a supported storage location for the Oracle Cluster Registry
Additional information
/crp2db01/OCR/ocr_1 is not shared
However , this mountpoint is shared across both the nodes.
Note: 11201 grid installation was successful and it accepted the above locations for OCR. however ,we need 11.2.0.3 cluster for 11.2.0.3 database

As for your current problem, just because Oracle "allows" OCFS2 in a GRID environment, I would never suggest nor implement that. It adds a layer of complexity that is totally unnecessary when a GRID/ASM implementation performs circles around OCFS2. ASM is much easier to manage, maintain, expand and shrink than OCFS2. Especially at version 11.2.0.3. When working at a large telco a few years ago, we had a 300TB+ ASM environment. OCFS2 could not even begin to be that big. ASM will provide you a MUCH more stable environment than OCFS2. And with ASM there is a lot of "magic" that happens with OCR/Voting that makes your life MUCH easier. If you "require" shared application files, then use ASM/ACFS. It is a much better "volume manager" than OCFS2.
Since you must present devices to the system for OCFS2, you should not have any problems doing the same for ASM. (and don't use ASMLib as it is going away and is not necessary - just make sure you use a partition that skips the first 1M (usually cylinder 1) and you should be good to go!)
I also would not use a "shared ORACLE_HOME" on either ACFS or OCFS2. The biggest reason is that you lose the ability to do a "rolling" upgrade and when you have a VLC, that becomes much more important that saving a few GB worth of storage.
I would also pay attention to this:
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
3.1.4.2 General Storage Considerations for Oracle RAC
Use the following guidelines when choosing the storage options to use for each file type:
You can choose any combination of the supported storage options for each file type provided that you satisfy all requirements listed for the chosen storage options.
If you plan to install an Oracle RAC home on a shared OCFS2 location, then you must upgrade OCFS2 to at least version 1.4.1, which supports shared writable mmaps.
Oracle recommends that you choose Oracle ASM as the storage option for database and recovery files.
For Standard Edition Oracle RAC installations, Oracle ASM is the only supported storage option for database or recovery files.

Trying to install adobe acrobat pro 9 on a new laptop after deactivating it on old laptop. After installation I get Update check for some reason then doesn't let me go any further Anyone know why this is?

OK so I have deactivated and uninstall the version off the old laptop, then reinstalled the version on the new laptop. When you go to open a document it says it wants to do an upgrade check for some reason, anyone know why this is? It will not take the serial number after that and it doesn't show the version we have in the drop down list.

Hi johnb49273320,
What operating system are you running on the new laptop? If it's a current OS, then it may be incompatible with Acrobat 9. Please see https://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-prod ucts.html.
It could also be that you're trying to install an upgrade, and the installer is looking for the serial number for the previous version (is the previous version listed in the drop-down list?).
Best,
Sara

DB installation fails at Update DB statistics

Hi,
During DB installation at Update database statistics Installation error.
Error shows that
MTU- 03010 Execution of the command "/sapmnt/QMS/exe/brconnect '-u' '/' '-c' '-f' 'crsyn -o 'SAPQMS' finished with status TST_ERROR
brconnect.log error
/usr/lib/hpux/dld.so: Unable to to find library 'libclntsh.so.10.1
Any help.
- Kristene

hI
Skip this step and continue the installation and after completion the setup from db13 run update statistics
Regards
Vishal

Installations fail: wireless toolkit ,sun1studio for wireless

Hi I am trying to extract the j2me wireless toolkit and I get this error right after responding yes to the license agreement, I am running redhat 9
Do you agree to the above license terms? [yes or no] yes
./j2me_wireless_toolkit-2_0-linux-i386.bin: line 271: uudecode: command not found
Failed to extract JavaVersionTester class
I just switched to redhat nine and I am reinstalling my java development environment
and I have found that the sun studio and jwsd installations also report errors in the install, although they seem to have installed properly

install the sharutils rpm on the third redhat disk, you should be fine

Installation Fails via Update Site for Eclipse 3.2.1

Similar Messages

Maybe you are looking for