Installation from Excel Analyzer faultily

When I try to install the Oracle BI Publisher Excel Analyzer I get the following error message: "Error installing internal.exe (0xa00)". I use the Oracle BI Publisher 10.1.3.2. and Excel 2003. To by sure I have installed DotNet 2.0. Does somebody have a idea?

Sorry the error message: Error installing iKernel.exe (0xa00)

Similar Messages

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Excel Analyzer template problems with Excel 2003

There are numerous common problems when using Excel Analyzer templates with the Analyzer Add-In for Excel 2003:
The following problems have been found in the latest version of the stand-alone BI Publisher version 10.1.3.3.2:
1) If your report name is more than 24 characters long, the Excel Analyzer template will never open in Excel. The error is completely uninformative, too. The reason is that the Analyzer template tries to make a tab in the Excel file called <report_name>.xdo. Since tab names can only be about 26 characters long, Excel chokes when opening the file. It would have been nice if BI Publisher printed an error when encountering this situation.
2) If your report produces too many rows, Excel will time out when opening the Analyzer template. Again, the error in this case is completely uninformative. In fact it appears no different from the error in (1). Excel 2003 is supposed to have a row limit of 65,000, but we can't get the Excel Analyzer template to open with more than about 15,000 rows. This is a completely unacceptable limitation if you're going to be making pivot tables in Excel. This is a processing time-out problem, which cannot be remedied by changing any settings in BI Publisher.
3) If you use the data in your Excel Analyzer template to make a wide report, like maybe one column for each day in the year, because maybe you want to plot the data over a full year, then forget about opening this report successfully. Since the number of days in a year is more than 256, Excel will choke when trying to open the template. No informative error here either.
4) If you're going to make a Pivot Chart in Excel, in the Analyzer template, then your reports cannot produce more than 256 rows. I'm not talking columns, I'm talking ROWS people! No more than 256 rows. This is because Pivot Charts require creating a sideways pivot table, which means your rows end up as columns. This is the only way to plot data with time on the x-axis, which is where it should almost always be.

I posted the link to the Microsoft software that works with Office 2007 to save as a PDF
If you need other Microsoft help, search at http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
If you have a Reader question, go to http://forums.adobe.com/community/adobe_reader_forums

Merge Two Reports in Excel Analyzer - One To Many Relationship

I want to show AR Data with CO Data - e.g. a bill + Income and it's associated account ssignemnt on the FI/CO side. I want the report to be able to show a cost centre manager to be wary of the income credited to their cost centre when a debtor has been raisedaas they may not fully pay the bill. To do this I'm using the standard DSO for AR & GL line items. Fisrtly I run a query on GL line item data where the user can select from a cost centre variable to look at credits to their cost centre. This produces a list of source documents that are used (via replacement path variable) in a second query. The second GL Query gives me a list of the allocation numbers for those line items. Had to be two queres as there are two GL postings that needed linking (this is because the cost assignment comes from a ceratin acc type and the debtor information comes from another acc type). I then use the allocation number (again via a replacement path variable) to run a third query on the AR data that shows all bills and payments linked to that allocation number. It seems to work ok.
However I have put these three queries in an Excel Analyzer workbook. All the user does is enter a cost centre when running the report. Each query is on a different sheet but what I'd like to do is merge the data on to the one sheet. I want to see the bill and it's payments from the AR data matched up with the cost assignment from the FI/CO data. This would be a one to many relationship e.g. one bill may have it's cost assignment split over more than one cost centre. Is there anyway to do this using simple excel functionality?
So I'd like to see:
Allocation No. 12345 Bill £100 Revenue £50 Cost Centre 1234 £25
Cost Centre 2345 £25
Anybody any ideas?

Hi,
Thanks for your answers.
I did explore using infosets but really struggled with joining the data and getting a sensible output. For example where a bill was done in installments I was getting 12 lines (e.g. one for each month) rather than just one. THis meant it looked liked they'd paid twleve times as much etc.
I did also try report to report. Which to my mind worked ok. Except the customer wanted it all in "One" report rather than having to drill down to see data.
I'll try a multiprovider but I'm worried that I'll end up with similar issues as I had when using the infoset.
Cheers
Joel

How can I capture the screen data sheet from netwrork analyzer?

Hi All!
Could you help help me this! I want to capture the screen data from network analyzer, and save it to my PC. How can I do that with LabVIEW 8.0?

Hello,
Do you know if the 8722A is similar to the 8722B or C model? We have a LabVIEW driver for those, but the A model is not listed. Click here to go to the driver download site. Even though your instrument may not be on the list, the driver may still work with your instrument, so I recommend downloading and installing it to see if you get anything.
When you want to capture the whole screen, what exactly do you mean? Do you want to capture an actual screenshot of the display of the analyzer or do you just want to capture all the data in digital format and send it into LabVIEW? Do you need an excel type file? Are you seeing the display on the instrument itself or a user interface panel program on your computer? If on your computer, is it LabVIEW or a different software program? I am sorry, but I am not familiar with your instrument or how it works, but hopefully we can get this figured out for you!
Chris R.
Chris R.
Applications Engineer
National Instruments

I would like to execute an existing BW report from Excel (using VBA).

I would like to execute an existing BW report from Excel (using VBA) and download the results into Excel. I understand that there is an Excel Add-In which (I believe) should allow me to do this. I am an experienced user of Excel / VBA but I have virtually no experience with SAP. If someone could point me to any source of information or specific instructions I would be extremely appreciative. I've done multiple searches on the internet but everything I find seems to assume more knowledge of SAP and SAP acronyms than I possess.

Paul,
If your company (or your client's company) has an SAP license (I assume this is the case, since there would be no other reason for you to want to access an SAP system using Excel), there is a person in your company who can request an ID for you. It is called a SAP Service Marketplace userid, more commonly called an 'S' number. This person in your company is usually a Basis Administrator. Go to your SAP Basis team and ask them for access to Service Marketplace.
The common solution for your Excel analysis problem is to install the Bex Analyzer on your PC. You will need these same guys (Basis Team) to help you with getting the required SAP access, and to install the associated SAP software onto your PC.
In the meantime, here is some bedtime reading for you.
Analysis &amp; Reporting: BEx Analyzer - Business Intelligence - SAP Library
Best Regards,
DB49

Excel Analyzer cannot connect to server

All, I am having some problems connecting the Excel Analyzer to the server I'm retrieving information from. Here are the steps I do:
1. Connect to BI Publisher, open a Report.
2. Go to View and click on Excel Analyzer button.
3. Enable macros and wait for the report to open.
4. Go to Oracle BI Publisher Menu and click on Login.
At this point, Excel opens a message that says 'Error: Could not get server version: 504 - Gateway Time-Out'.
I have been able to connect successfuly through the Word Template Builder many times, but I somehow cannot connect through Excel. Is there a configuration or something I'm missing before being able to make it work?
Thanks in advance.

What is the OS version?
What is the Office version ?
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Upgrading from Excel 97 to Excel 2000

Recently, I upgraded from excel 97 to excel 2000.
Since then, all the Labview vi's I've used to work with excel are no more executable (broken wire) on my computer.
However when I opened these vi's on another computer (also with excel 2000) there are no errors.
How can I make these vi's work on my computer?
Are there something missing during excel 2000 installation? How can I check that?
I'm using Labview 5.1 under Windows NT
Thanks

If you are referring to the "Write table to XL.vi" try doing the following:
1) Go into the block diagram and open up the vi "Open Excel and make visible.vi"
2) Right mouse click on Automation refnum (The label is titled exel._application)
3) Check to see that under the area "Select ActiveX class" that excel is
selected.
If not you will have to browse through your directories and locate
excel8.olb for
excel97 (I don't know what it is for excel 2000).
4) After that, go to the property and invoke nodes and reconnect the wires.
[email protected]
[email protected]
Attachments:
XL_2000_read_to_Table.zip ‏64 KB

Trying to connect to oracle 11gr2 from excel

How can I connect from excel to oracle 11g like in version 10 that we used to do it with an odbc, I couldn´t find the driver alone, I only find an ODTwithODA.... package that has many other utilities.

You need an Oracle client installation of some type. That package is one, and there's others available. That one does contain what you need, and some other stuff you don't care about. It's probably the easiest one to use in terms of getting up and running quickly.

Print setting changes from Excel to pdf

I am creating a pdf file from Excel. When I produce the pdf file, the pdf does not retain the print settings as Excel. When I open the pdf, it has changed to portrait. I have hundreds of files that will need to be changed so just changing the print setting on each file is not an option.
Please help!

Hi Francois
I do not know transaction EFRM, but I know that to create a print form with SAP Interactive Forms (perhapos you are using a different forms tool?) you need to work in transaction SFP, where you manually migrate the form.
A couple of comments on migrating from Smart Forms to Interactive Forms.
How to do it is documented in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/16/a369b1800e4bdda978ee0fe3b7bd2c/frameset.htm">SAP Help Portal</a>.
There is a migration wizard that assists you in migrating. It comes with recommended settings for those elements of a Smart Forms that migrate well (ABAP program nodes, for example, are not supported in the Adobe-based solution). See the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/bb186ddb4441a7875a11d46ea6580d/content.htm">Notes</a>.
SAP-internal experience over the last three years has shown that in most cases migrating a Smart Form and then reworking the migrated form (which is usually necessary) takes more time and effort than analyzing the form carefully and then creating it from scratch in SFP. This is particularly the case when several business forms are in one Smart Form and output based on conditions. It is recommended to have one form template per business form.
Best regards,
Markus Meisl
SAP NetWeaver Product Management

Upload data from Excel to BI

Hi 2 all,
Can anyone please send me the complete steps for uploading of data from excel to BI??
Also tell me that when we use DSO or when we use infocube? and if we design query in query designer then we use info cube fields or DSO fields??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
there is no separate Tcode for 3.5 environment... but in RSA1 itself they give 3.X functionality also.. So, if you want to follow the 3.5 procedure you can go thru that... in the Infosource tab--> select your info area -->and right clcik it.. ->in that create INFOSOURCE 3.X.. for that just right clcik ur CUBE or DSO and --> Additional functions --> Update Rules.. and like that you can follow the same procedure which you done in 3.5..
and for data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
1) Create a data source
RSA1->Source Systems->FILE(File)->PC_FILE(Filesourcesystem)->Create Application Component(optional)-Create Data source
2) Create the data provider
3) Create Transformation
Right click on the data provider, choose 'create transformation' and choose your data source (give relevant data source and its type)
Just connect the relavant fields between your data source and data provider.
4) Create DTP
Then Double click on the DTP node created under yous transformations. choose the extraction mode
5) Load the data: there are 2 ways:
you can run the infopackage and DTP separately or create a process chain consisting of these infopackage and DTP and run.
Also check /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option for hex option
Thanks,
Sankar M

I am having trouble printing to an Epson XP600. It is a new printer and it has been replaced because we thought it was the printer. Basically, when I print from Excel, only color will print.

I am having trouble printing to an Epson XP600. We have replaced the printer and we are still having the same problem. When I try to print from Excel, only the color prints. Any suggestions?

Has anyone else had issues not being able to print black (such as a document)? My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

Send email from excel

Can anyone help please.
I would like to send a range from excel 2011 by email using VBA code. I can do this with Outlook but It fails because of using the Mac Mail Client.
Is there any code out there that will send via the mac mail client
Regards
Gary

Have you tried zipping Outlook application, and quitting Excel and reopening it? Perhaps if there is no Outlook, it will go to the default e-mail client.

Reading records from excel

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i am uploading data from excel to form(record wise)and saving.
now i am reading the data from 2nd row by assuming that 1st row followed with columns titles.But, my question is we cannot predict the excel that the record always starts from 2nd row. how check for the starting for the actual data
is its something like if column1 is null and col2 is null and col3 is null
then increment the row and repeat the process.. but, upto which record i should continue this process..
anybody is having better solution than this..
Thanks..

Hi,
The nice option would be keep the upload (start from and end) manually, What i mean is in the uploading screen put two more fields like Start Row and End Row and let the user fill these fields before starting the upload process. So, if any error will happen during upload then let the user handle.
-Ammad

HP ePrint from excel add-in: Error while getting driver name for printer

Trying to use add-in for ePrint from excel/word I get, "error while getting driver name for printer \\...HP DesignJet 800PS 42 by HP," with an option to select "OK" and that same message repeats with each printer in our network, and then it doesn't allow me to print using the add-in. However, I can print normally to HP Go Web, open up Print and Share, then print it from there. This happens with excel and word. I have Office Suite 2007.

Hello modameister,
Sorry you are having issues with this printer and the ePrint add-on. There are a couple of questions I would like you to answer please.
1. What operating system are you using? (XP,VISTA,7,MAC OS X)
2. What and how much data are you trying to print?
3. Have you tried to copy and paste the data into a different application or tried using the snip it tool?
4. Are you receiving any .dll errors (mscms.dll)
Thanks
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Installation from Excel Analyzer faultily

Similar Messages

Maybe you are looking for